Texas Instruments

INA115AU/1K - 1MHz Precision Instrumentation Amplifier | Texas Instruments

MPN: INA115AU/1K ✓ فعال
50 µV Vdss 16-pin SOIC (DW) Package
MOQ: 1 |

INA115AU/1K جائزہ

Texas Instruments INA115AU/1K is a precision, switched-gain instrumentation amplifier with 1 MHz bandwidth, 50 µV maximum input offset voltage, 11 nV/√Hz input noise, and 3 mA power consumption. The device is housed in a 16-pin SOIC (DW) package and is intended for low-level differential signal measurement.

An instrumentation amplifier is a specialized amplifier category that combines differential input measurement, high input impedance, accurate gain control, and common-mode rejection. Its place in the signal-chain hierarchy is signal conditioning before an ADC, a sensor interface, or a precision measurement system. The INA115 family extends this hierarchy through switched gain selection, allowing one package to support multiple measurement ranges without changing the external feedback network.

The primary features of INA115AU/1K include a 1 MHz gain-bandwidth product, 50 µV maximum offset voltage, 11 nV/√Hz input-referred noise, and 3 mA typical power consumption. The 1 MHz bandwidth supports faster settling than many precision instrumentation amplifiers, while the low offset and noise are important when extracting small sensor signals from larger common-mode voltages. Switched gain makes the device practical for systems that must change sensitivity between measurement ranges.

The INA115 uses a precision architecture intended to preserve small differential signals in the presence of common-mode voltage and supply variation. Its 16-pin SOIC package provides a conventional surface-mount footprint suitable for industrial and instrumentation equipment. The manufacturer describes the INA115 as a single-channel, switched-gain-enabled precision instrumentation amplifier, with an operating range extending down to ±2.25 V and up to ±18 V according to comparison records for the family.

Typical uses include bridge-sensor signal conditioning, biomedical instrumentation, current-shunt measurement, laboratory test equipment, and precision industrial sensor acquisition. The 1 MHz bandwidth is particularly useful when the measurement must be sampled rapidly, while the 11 nV/√Hz noise specification favors low-amplitude signals such as strain-gauge, thermocouple, and resistive-sensor outputs.

Layout should treat the input stage as a high-impedance precision analog circuit. Keep input and feedback traces short, place gain-control components away from sensitive input nets, provide local supply bypassing, and avoid routing high-current or switching signals beneath the amplifier pins. Confirm gain, supply, output-swing, and settling requirements against the manufacturer's recommended operating conditions before committing the layout.

This product page combines the manufacturer product information, package and ordering data, verified distributor listings, and cross-reference results with application guidance. It also distinguishes true same-package drop-in options from devices that are only functionally similar, helping engineers compare replacement choices without overlooking footprint, gain, noise, or bandwidth constraints.

کے لیے ڈراپ اِن متبادل INA115AU/1K — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں INA115AU/1K (یکساں فارم فیکٹر اور فٹ پرنٹ).

Texas Instruments

INA115AUG4

✅ ڈراپ-اِن
📦 16-pin SOIC (DW)
Same INA115 family and 16-pin SOIC format; the G4 suffix changes the ordering grade designation while core 1 MHz bandwidth, 50 µV offset, and 11 nV/√Hz noise remain aligned

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

INA115AU

✅ ڈراپ-اِن
Texas Instruments
📦 16-pin SOIC (DW)
Precision instrumentation amplifier · 1 amplifier · 1 MHz · 50 µV · 11 nV/√Hz · 3 mA · 0.25 µV/°C · 2 nA

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

INA115AU/1K زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type Precision instrumentation amplifier
Number of Channels 1 channel
Gain-Bandwidth Product 1 MHz
Maximum Input Offset Voltage 50 µV
Input Noise Density 11 nV/√Hz
Power Consumption 3 mA
Gain Control Switched gain
Supply Voltage Range ±2.25 V to ±18 V
آپریٹنگ درجہ حرارت رینج -40 °C to +85 °C
پیکیج 16-pin SOIC (DW)
ماؤنٹنگ ٹائپ Surface mount
Slew Rate 0.06 V/µs

INA115AU/1K 16-pin soic (dw) پن کنفیگریشن گائیڈ

INA115AU/1K (16-pin soic (dw) پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

INA115AU/1K کے لیے 16-pin soic (dw) پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں INA115AU/1K.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

INA115AU/1K کے لیے موزوں ہے 6 ایپلیکیشنs: Bridge Sensor Signal Conditioning, Medical Instrumentation, Current Shunt Measurement, Laboratory Test Equipment, Precision Industrial Data Acquisition, Portable Sensor Instrument.

🏭

Bridge Sensor Signal Conditioning

The INA115AU/1K is well suited to conditioning differential outputs from resistive bridge sensors such as strain gauges and pressure elements. Its 50 µV maximum input offset voltage and 11 nV/√Hz input noise help preserve small millivolt-level changes around a larger common-mode voltage, while the 1 MHz bandwidth supports faster acquisition than a slow precision amplifier. The switched-gain control allows a single analog channel to cover multiple bridge sensitivities. Keep the bridge excitation and analog return paths compact, and use the manufacturer gain configuration when calculating full-scale input range.

💊

Medical Instrumentation

The INA115AU/1K can serve as the differential input stage for low-level biomedical signals when the system requires precise amplification with moderate bandwidth. Its 11 nV/√Hz noise density and 50 µV maximum offset are useful when extracting small sensor currents or differential voltages from a common-mode background. The 1 MHz bandwidth allows the amplifier to support sampled acquisition rather than only static measurements. The designer must still evaluate patient-safety isolation, leakage, electrode protection, and applicable medical requirements separately from the amplifier specification.

⚡

Current Shunt Measurement

The INA115AU/1K is appropriate for measuring the small differential voltage generated across a current-sense shunt. The low 50 µV maximum input offset reduces error near zero current, and the 11 nV/√Hz input noise supports detection of small shunt drops. Its 1 MHz bandwidth provides useful response for pulsed and dynamic current measurements. Keep the Kelvin sense connections paired and away from high-current switching paths so that voltage drops in the PCB traces do not become part of the measured signal.

🔧

Laboratory Test Equipment

The INA115AU/1K can serve as a precision analog front end in programmable instruments that measure low-level differential voltages. Its switched-gain architecture supports multiple sensitivity ranges, while 1 MHz bandwidth is useful for test systems requiring faster settling than a DC-only amplifier provides. The 3 mA power figure also helps when fitting several measurement channels into compact bench equipment. Establish gain accuracy, settling time, and output swing at each range using the manufacturer curves before setting acquisition timing.

🏭

Precision Industrial Data Acquisition

The INA115AU/1K supports precision industrial data-acquisition channels that must amplify weak differential sensor signals before conversion. Its 50 µV maximum offset, 11 nV/√Hz noise, and switched gain provide a practical balance between measurement resolution and dynamic range, while 1 MHz bandwidth accommodates faster sensor events. The 16-pin SOIC package is compatible with conventional surface-mount assembly methods. Provide stable supply bypassing and isolate analog input routing from motor, relay, and power-converter switching nodes to prevent coupled errors.

📱

Portable Sensor Instrument

The INA115AU/1K fits portable sensor instruments where low power and precision amplification are both important. The manufacturer identifies a 3 mA power-consumption level, allowing multiple amplified channels to operate within a constrained power budget. The 11 nV/√Hz noise density is useful for extracting weak signals from resistive or magnetic sensors, while the 1 MHz bandwidth supports responsive measurements. Battery-powered designs should still verify supply current across operating modes and use power-gating or shutdown techniques where the device configuration permits them.

تجویز کردہ پروڈکٹس کا خلاصہ

INA115AU Texas Instruments استعمال ہوتا ہے: Bridge Sensor Signal Conditioning, Medical Instrumentation, Current Shunt Measurement, Laboratory Test Equipment, Precision Industrial Data Acquisition, Portable Sensor Instrument INA115AUG4 Same-family ordering option for alternate grade requirements استعمال ہوتا ہے: Bridge Sensor Signal Conditioning, Medical Instrumentation, Current Shunt Measurement, Laboratory Test Equipment, Precision Industrial Data Acquisition, Portable Sensor Instrument
What are the key specifications of INA115AU/1K that engineers should know?
The INA115AU/1K is a single-channel precision instrumentation amplifier with 1 MHz bandwidth, 50 µV maximum input offset voltage, 11 nV/√Hz input noise, 3 mA power consumption, and switched-gain control. According to the Texas Instruments INA115 product page, it is packaged in a 16-pin SOIC (DW). These figures make it suitable for low-level differential measurements that require moderate bandwidth, low noise, and adjustable sensitivity.
Where can I download the INA115AU/1K datasheet PDF?
The official INA115AU/1K documentation is available through the Texas Instruments product page at https://www.ti.com/product/INA115 and the ordering page at https://www.ti.com/product/INA115/part-details/INA115AU/1K. These official pages provide the manufacturer datasheet, pin information, ordering details, and electrical characteristics. Use the manufacturer document for final design verification because distributor-hosted copies may reflect older revisions.
Where can I find the INA115AU/1K pinout?
The INA115AU/1K pin assignment is documented in the Texas Instruments INA115 datasheet and its 16-pin SOIC (DW) package drawing. The ordering information identifies the device as a 16-pin SOIC. Before assigning PCB nets, cross-check every signal and supply pin against the package diagram in the current manufacturer datasheet, especially the gain-control and supply connections.
What is the supply voltage range of INA115AU/1K?
The INA115AU/1K operates across a ±2.25 V to ±18 V supply range, with ±15 V identified as the typical dual-supply condition for the INA115 family. The range permits operation from low-voltage dual supplies through higher-voltage analog systems. Confirm output-swing and common-mode limits at the selected supply and gain before finalizing the signal interface.
Is INA115AU/1K suitable for precision sensor measurement?
The INA115AU/1K is suitable for precision sensor measurement because it combines 50 µV maximum input offset voltage with 11 nV/√Hz input noise and a high input impedance instrumentation-amplifier topology. It is especially appropriate for bridge, shunt, strain-gauge, and other low-level differential signals. The switched-gain feature allows the system to change measurement sensitivity while retaining a common signal-conditioning architecture.
What can replace INA115AU/1K as a drop-in part?
The INA115AUG4 is the closest documented drop-in candidate because it is an INA115-family ordering option associated with the same functional device and package family. The INA115AU base ordering designation is another same-family option without the /1K reel suffix. Verify exact gain logic, temperature grade, pinout, and availability against the manufacturer datasheet before production use; cross-reference tools alone do not establish production compatibility.
Is INA115AU/1K the same as INA115AUG4?
The INA115AU/1K and INA115AUG4 are both documented INA115-family ordering options, but their orderable suffixes can encode different grade, packaging, or environmental conditions. The INA115AU/1K identifies the 16-pin SOIC (DW) /1K ordering option, while INA115AUG4 appears as an equivalent family designation in cross-reference results. Compare the complete ordering table and pin descriptions in the Texas Instruments documentation before treating them as interchangeable.
INA115AU/1K vs INA115AUG4 — which is better for industrial instrumentation?
Choose INA115AU/1K when the design specifically requires the documented /1K 16-pin SOIC ordering option. Choose INA115AUG4 only after checking its exact temperature grade, lifecycle status, and ordering configuration against the INA115AU/1K datasheet. Both belong to the same INA115 precision instrumentation-amplifier family, so their core 1 MHz, 50 µV, 11 nV/√Hz, and 3 mA positioning is closely related, but suffix-level qualification still controls suitability.
When should I choose INA115AU/1K over another instrumentation amplifier?
Choose INA115AU/1K when the design needs a compact, single-channel instrumentation amplifier with switched gain, 1 MHz bandwidth, 50 µV maximum offset, and 11 nV/√Hz noise in a 16-pin SOIC. It is a stronger fit than a slower precision device when signal settling speed matters. It may be less suitable than a higher-voltage, rail-to-rail, or automotive-qualified alternative when those specific requirements dominate.
Is INA115AU/1K suitable for a 1 MHz measurement system?
The INA115AU/1K has a specified 1 MHz gain-bandwidth product, making it appropriate for measurement systems that need more bandwidth than a slow precision instrumentation amplifier provides. The usable bandwidth still depends on the selected closed-loop gain, output loading, supply level, and required settling accuracy. Use the manufacturer gain and frequency-response curves to establish the actual signal bandwidth at the operating gain.
How much power does INA115AU/1K consume?
The Texas Instruments product page identifies the INA115 as a 3 mA-power precision instrumentation amplifier. This low power figure supports portable instrumentation and low-power sensor acquisition. Because the total supply current can vary with configuration, confirm the operating current for the selected gain and supply condition in the manufacturer electrical-characteristics table when designing the power tree.
What is the operating temperature range of INA115AU/1K?
The INA115 family comparison information specifies an operating-temperature range of -40 °C to +85 °C for the INA115AU device. Use that range as the baseline industrial condition and confirm the exact grade associated with the purchased suffix. If an automotive or extended-temperature requirement exists, verify that qualification separately rather than assuming the base family rating applies.
Where can I buy INA115AU/1K and check its current lead time?
Use the Request a Quote form on this page to request current INA115AU/1K availability, lead time, and ordering support. The manufacturer product page lists INA115AU/1K as an active family option, but inventory and lead time can vary by quantity and order configuration. Provide the required quantity, reel packaging, and target delivery date in the quote request.
What is the price of INA115AU/1K?
The current price of INA115AU/1K should be obtained through the Request a Quote form on this page because pricing and quantity availability can change with market conditions. The form is the appropriate route for a current quote tied to the exact MPN, required quantity, and packaging configuration. No static price should be substituted when preparing a production bill of materials.
Is INA115AU/1K in stock?
Current stock for INA115AU/1K should be confirmed through the Request a Quote form on this page. The manufacturer lists the INA115 family as active, but that status does not guarantee inventory for every orderable suffix or quantity. Include the required date and reel quantity in the request so the supplier can confirm the appropriate manufacturing and allocation position.

کے لیے انجینئرنگ ریفرنس ڈیٹا INA115AU/1K — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose INA115AU/1K when a design needs a single-channel precision instrumentation amplifier with switched gain, 1 MHz bandwidth, 50 µV maximum input offset voltage, and 11 nV/√Hz input noise. It is particularly suitable for bridge sensors, current shunts, medical instrumentation, and industrial acquisition systems where the source is differential and the signal is small. INA115AUG4 is the practical same-family alternative when its ordering grade and lifecycle configuration match the design; confirm the manufacturer ordering table before substitution. INA115AU is the closest same-family ordering option without the /1K suffix. Neither is a better choice if the system requires rail-to-rail output, a wider supply range, higher automotive qualification, or a package other than 16-pin SOIC. For those requirements, select a different instrumentation amplifier rather than assuming functional similarity guarantees drop-in compatibility.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ INA115AUG4 INA115AU
Package 16-pin SOIC (DW) 16-pin SOIC (DW) 16-pin SOIC (DW)
Brand Texas Instruments Texas Instruments Texas Instruments
Product Type Precision instrumentation amplifier Precision instrumentation amplifier Precision instrumentation amplifier
Channel Count 1 channel 1 channel 1 channel
Gain-Bandwidth Product 1 MHz 1 MHz 1 MHz
Maximum Input Offset Voltage 50 µV 50 µV 50 µV
Input Noise Density 11 nV/√Hz 11 nV/√Hz 11 nV/√Hz
Power Consumption 3 mA 3 mA 3 mA
Gain Control Switched gain Switched gain Switched gain

اہم امتیازی خصوصیات

  • Combines precision input performance with higher signal bandwidth (بمقابلہINA114AUE4)
  • Switched gain supports multiple measurement ranges without changing the package (بمقابلہINA115AU)
  • Low-noise precision in a compact surface-mount package (بمقابلہINA115AUG4)

ڈیزائن نوٹس

Place the INA115AU/1K close to the bridge, shunt, or sensor output, and route the two differential inputs as a compact pair. Keep the gain-control and feedback components close to their associated pins, and avoid creating large copper loops around the precision input stage. A ground reference that follows the signal-source ground path is preferable to a path that passes through noisy switching-current loops.

Use local supply bypassing at the amplifier pins and keep the supply return compact. The INA115 is identified as a 3 mA-power device, but the exact supply current and output behavior still depend on operating conditions. Verify both positive and negative supply rails, startup behavior, and output swing at the selected gain in the manufacturer electrical-characteristics tables before defining the system power budget.

Treat gain changes as control events that can introduce transient settling into a precision measurement. Command the gain only after the source has reached its operating state, and allow the amplifier to settle according to the manufacturer gain-versus-settling behavior. For dynamic measurements, evaluate the 1 MHz bandwidth at the actual closed-loop gain rather than assuming full bandwidth is available at every setting.

Do not substitute INA115AU/1K solely because another device is described as an instrumentation amplifier. Confirm the 16-pin footprint, gain-control logic, supply range, offset, noise, bandwidth, temperature grade, and lifecycle status. In particular, verify the complete ordering suffix because /1K, G4, and legacy -1/1K designations may differ in packaging or qualification even when they identify closely related INA115 variants.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The available product and distributor records do not explicitly state the requested compliance attributes. Automotive qualification is treated as not applicable only because this ordering option is not identified as an AEC-Q100 variant.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-14 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

INA115AU/1K datasheet INA115AU/1K pinout INA115AU/1K datasheet pdf INA115AU/1K schematic INA115AU/1K equivalent INA115AU/1K replacement INA115AU/1K cross reference INA115AU/1K vs INA115AUG4 INA115AU/1K price INA115AU/1K stock Texas Instruments INA115AU/1K INA115AU 16 pin SOIC pinout INA115AU switched gain amplifier INA115AU bridge sensor application

متعلقہ اجزاء اور اصطلاحات

Texas Instruments INA115AU/1K INA115 INA115AUG4 INA115AU precision instrumentation amplifier instrumentation amplifier signal-conditioning amplifier low-noise amplifier differential amplifier switched gain gain-bandwidth product input offset voltage input noise density common-mode rejection 16-pin SOIC SOIC package family surface-mount package bridge sensor current-shunt measurement medical instrumentation industrial data acquisition laboratory test equipment precision sensor interface
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں