Texas Instruments

INA240A2D - 50V/V Bidirectional Current-Sense Amplifier | Texas Instruments

MPN: INA240A2D ✓ فعال
-4 V to 80 V Vdss 8-pin SOIC Package
MOQ: 1 |

INA240A2D جائزہ

The Texas Instruments INA240A2D is a bidirectional, precision current-sense amplifier with a fixed gain of 50 V/V, a common-mode operating range from -4 V to 80 V, and an 8-pin SOIC package. It is designed to measure small shunt-resistor voltage drops while rejecting PWM-related transients, making it suitable for motor drives, solenoid controls, power converters, and battery systems.

A current-sense amplifier is a specialized instrumentation amplifier that converts the differential voltage across a precision shunt resistor into a scaled voltage proportional to current. The INA240 belongs to the current-sense amplifier category and the broader amplifier and measurement IC hierarchy. Its bidirectional architecture supports both positive and negative current, while its negative common-mode capability allows operation below ground during the flyback interval of inductive loads.

The A2 gain option provides 50 V/V amplification, allowing a small shunt drop to produce an easily measurable output. The -4 V to 80 V common-mode range supports low-voltage motor systems, industrial 24 V and 48 V buses, and automotive-style transient environments. The manufacturer identifies the device as an ultra-precise current-sense amplifier with enhanced PWM rejection. Its operating temperature range extends from -40 °C to +125 °C for industrial and automotive temperature-grade designs.

The INA240 uses a differential input arrangement to reject supply ripple and common-mode voltage while measuring the shunt differential. Bidirectional operation allows the output to move above or below ground to indicate current direction. The 8-SOIC format supports conventional surface-mount assembly and provides a practical package for power-control boards where the shunt may be separated from sensitive analog circuitry.

Typical uses include BLDC and brushed motor control, solenoid and relay current monitoring, DC-DC converter feedback, battery charge and discharge measurement, inverter leg monitoring, and industrial power-supply protection. The wide common-mode range is particularly useful when the sensed current is switched while the amplifier supply remains independent of the high-voltage power rail.

Design the shunt and analog path carefully. Keep the differential input traces short and symmetric, place the amplifier close to the shunt, and use low-value resistors with appropriate pulse ratings. Input filtering must preserve the intended measurement bandwidth while attenuating high-frequency switching noise. Verify common-mode voltage, output swing, supply headroom, thermal performance, and amplifier saturation before committing the PCB layout.

This page consolidates the device architecture, operating limits, application guidance, package details, sourcing workflow, and drop-in replacement analysis into one engineering reference. It also identifies where application-specific values must be calculated from the actual shunt resistance, current waveform, board environment, and power-supply topology.

کے لیے ڈراپ اِن متبادل INA240A2D — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

INA240A2D-Q1

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 8-pin SOIC
Automotive qualification added; gain remains 50 V/V and the 8-pin SOIC footprint is unchanged, indicating 0% change in the principal gain parameter.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

INA240A2D زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Device Type Bidirectional current-sense amplifier
Fixed Gain 50 V/V
Common-Mode Voltage Range -4 V to 80 V
آؤٹ پٹ کی قسم Bidirectional voltage output
PWM Rejection Enhanced
آپریٹنگ درجہ حرارت رینج -40 °C to +125 °C
پیکیج 8-pin SOIC
پن کی تعداد 8 pins
ماؤنٹنگ ٹائپ Surface mount
Automotive Temperature Grade Supported

INA240A2D 8-pin soic پن کنفیگریشن گائیڈ

INA240A2D (8-pin soic پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

INA240A2D کے لیے 8-pin soic پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں INA240A2D.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

INA240A2D کے لیے موزوں ہے 6 ایپلیکیشنs: BLDC Motor Phase-Current Sensing, Solenoid and Relay Current Monitoring, 48 V Industrial DC-DC Converter Feedback, Battery Charge and Discharge Monitoring, Inverter Leg and DC-Link Protection, Automotive High-Side Load Monitoring.

🏭

BLDC Motor Phase-Current Sensing

The INA240A2D fits BLDC motor control because its -4 V to 80 V common-mode range accommodates switched phase voltages while its 50 V/V gain converts a small shunt differential into a controller-friendly analog signal. Enhanced PWM rejection helps reduce disturbance caused by fast edge transitions. Place the amplifier near the low-side shunt and route the differential inputs as a short, symmetric pair. Confirm that the maximum phase voltage, negative regenerative transient, amplifier supply, and output swing remain within the device limits throughout fast commutation.

⚡

Solenoid and Relay Current Monitoring

For solenoid and relay feedback, the INA240A2D can sense current in a path that swings above ground and briefly below ground. Its -4 V common-mode limit supports the negative flyback interval described for typical inductive loads, while bidirectional output reports current polarity. With a 50 V/V gain, a 10 mV shunt drop yields approximately 0.5 V output at nominal gain. Confirm flyback magnitude, shunt pulse energy, output saturation behavior, and the independent amplifier-supply requirement before production release.

🔧

48 V Industrial DC-DC Converter Feedback

The INA240A2D is appropriate for current-mode control or protection in a 48 V industrial DC-DC converter because the -4 V to 80 V common-mode range covers a nominal 48 V bus and associated switching excursions. The 50 V/V gain scales the shunt voltage for comparison with a control threshold or ADC input. Its enhanced PWM rejection supports operation next to high-dv/dt power stages. Validate the absolute common-mode maximum, output headroom, converter startup behavior, shunt power rating, and layout isolation at the intended switching frequency.

📱

Battery Charge and Discharge Monitoring

The INA240A2D can monitor charge and discharge current in battery systems by operating bidirectionally across a low-side shunt. Its 50 V/V gain provides useful resolution for small resistive drops, while the -4 V to 80 V common-mode range covers many portable and industrial battery architectures. The enhanced PWM rejection characteristic helps when the sensed rail is switched. Select a shunt with suitable continuous current, pulse energy, and temperature rating, and verify that the measured current does not drive the output outside its linear range.

⚡

Inverter Leg and DC-Link Protection

The INA240A2D is useful for inverter leg-current measurement where high common-mode voltage and PWM edges coexist near the shunt. Its -4 V to 80 V common-mode capability accommodates many 24 V and 48 V power-stage environments, and the 50 V/V gain provides a compact analog measurement path. Enhanced PWM rejection improves disturbance control but does not remove the need for careful filtering and layout. Confirm the maximum rail voltage including overshoot, shunt pulse rating, propagation behavior, and fault-path response during short-circuit events.

🚗

Automotive High-Side Load Monitoring

The INA240A2D supports high-side load-current monitoring when the load rail lies within the -4 V to 80 V common-mode range. The fixed 50 V/V gain and bidirectional response allow the same circuit to measure load current and regenerative or reverse current. The wide -40 °C to +125 °C operating range is suitable for harsh environments, while enhanced PWM rejection helps with switched automotive loads. Review the applicable automotive qualification requirement, transient protection, shunt placement, thermal performance, and ISO-style EMC design practices for the final vehicle platform.

What is the INA240A2D?
The INA240A2D is a Texas Instruments bidirectional current-sense amplifier with a fixed gain of 50 V/V and an 8-pin SOIC package. According to the Texas Instruments INA240 product documentation, it operates over a common-mode range of -4 V to 80 V and is optimized for accurate measurement of small shunt-resistor voltage drops with enhanced PWM rejection.
INA240A2D datasheet PDF
The official INA240A2D datasheet is available from the Texas Instruments product page at https://www.ti.com/lit/gpn/ina240. The document describes the -4 V to 80 V common-mode range, bidirectional operation, 50 V/V A2 gain option, enhanced PWM rejection, electrical characteristics, pin configuration, and application information. Use the manufacturer's document for the authoritative ordering information and test conditions.
What is the gain of INA240A2D?
The INA240A2D has a fixed gain of 50 V/V. According to Texas Instruments device documentation, the A2 designation identifies this gain option, while the INA240 family also includes other fixed-gain selections. With a 50 V/V gain, a 10 mV shunt differential produces a nominal 0.5 V output before accounting for offset, error, and output-swing limitations.
What is the common-mode voltage range of INA240A2D?
The INA240A2D supports a common-mode input range from -4 V to 80 V. According to the Texas Instruments INA240 product documentation, this range is independent of the amplifier supply and permits sensing during the below-ground flyback interval of solenoid loads. The complete circuit must still maintain adequate supply voltage and output headroom throughout the current waveform.
Where can I buy INA240A2D online?
The INA240A2D can be requested through the Request a Quote form on this page. That form is the appropriate route for current commercial availability, price, and lead-time information because channel pricing and inventory can change. Provide the exact INA240A2D ordering code, target quantity, and required delivery location when submitting the request.
What is the price of INA240A2D?
Use the Request a Quote form on this page to request the current INA240A2D price and quantity breaks. The form can also capture the required packaging, shipment destination, and production schedule. This avoids presenting a stale price for a component whose commercial terms may vary with order quantity, date, and market conditions.
What is the lead time for INA240A2D?
Request the current lead time for INA240A2D through the Request a Quote form on this page. State the quantity, reel or cut-tape preference, target date, and delivery region so the commercial response can reflect the actual order configuration. The manufacturer product page identifies the device as part of the active INA240 family.
Is INA240A2D in stock?
The Request a Quote form on this page is the source for current INA240A2D stock and allocation status. Submit the exact MPN, required quantity, and acceptable delivery date. Because inventory can move between distribution channels, the quotation response is more useful than a static stock statement on a product page.
What are the key specifications of INA240A2D that engineers should know?
The key INA240A2D specifications are 50 V/V fixed gain, -4 V to 80 V common-mode range, bidirectional operation, enhanced PWM rejection, a -40 °C to +125 °C operating range, and an 8-pin SOIC package. Texas Instruments describes the INA240 as an ultra-precise voltage-output current-sense amplifier intended for shunt-based measurements where high common-mode voltage and switching transients coexist.
INA240A2D vs INA240A3D - which is better for motor control?
Choose INA240A2D when 50 V/V gain is appropriate, and choose INA240A3D when the shunt drop and desired output scaling call for approximately three times that gain. The two devices belong to the same family, but their fixed gains are different, so replacing one with the other can amplify output noise, reduce available output headroom, or cause saturation. Texas Instruments device documentation supports the family-level operating and package information.
What is the difference between INA240A2D and INA240A1D?
The primary functional difference is fixed gain: INA240A2D provides 50 V/V, while INA240A1D provides 20 V/V. That one-third gain ratio changes the output voltage produced by the same shunt current and can require output-range recalculation in a replacement design. Texas Instruments documents both as gain options within the INA240 current-sense amplifier family.
When should I choose INA240A2D over another INA240 gain option?
Choose INA240A2D when the calculated shunt drop multiplied by 50 V/V remains inside the output range while retaining useful signal-to-noise ratio and transient margin. A lower gain may be preferable for larger shunt drops or closer ADC full-scale use, while a higher gain may improve resolution for small currents. Final selection must also account for saturation recovery, filtering, and operating temperature.
Is INA240A2D suitable for a 48 V motor driver?
The INA240A2D is suitable for a 48 V motor driver when the shunt and input network remain within the -4 V to 80 V common-mode range. Its enhanced PWM rejection is useful in switched motor systems, and bidirectional sensing supports both forward and regenerative current. Verify the instantaneous switching voltage, output swing, amplifier supply, and shunt pulse rating at the hottest operating condition.
What is the best drop-in replacement for INA240A2D?
The closest identified drop-in replacement is the automotive-qualified INA240A2D-Q1, which retains the same 50 V/V gain function and 8-pin SOIC footprint. A direct replacement should be validated against the complete INA240A2D electrical specification, including supply range, common-mode limits, accuracy, PWM rejection, output behavior, qualification, and lifecycle requirements before production use.
What can replace INA240A2D?
INA240A2D-Q1 is the leading same-family drop-in candidate because it preserves the 50 V/V gain and 8-pin SOIC footprint while adding automotive qualification. Cross-family amplifiers such as INA190A2 or TSC2011 may serve some current-measurement functions, but their voltage range, pin arrangement, supply requirements, and response characteristics must be checked rather than assuming package-level interchangeability.
Can INA240A2D replace INA190A2?
INA240A2D can replace INA190A2 only after a complete electrical and footprint comparison confirms that the 50 V/V gain, input pins, supply requirements, common-mode range, output range, and PCB land pattern match. Texas Instruments describes INA240A2D for operation from -4 V to 80 V common mode, while the INA190 family has a different voltage range. Direct substitution therefore requires design verification rather than name-only matching.
What is the best Texas Instruments equivalent for INA240A2D?
The best Texas Instruments equivalent identified for an exact-footprint review is INA240A2D-Q1, a 50 V/V automotive-qualified member of the INA240 family in the same 8-pin SOIC format. It provides distinct value through automotive qualification while preserving the target's principal gain and package dimensions. Confirm ordering temperature grade, qualification requirements, and all electrical limits before substitution.

کے لیے انجینئرنگ ریفرنس ڈیٹا INA240A2D — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose INA240A2D when a bidirectional 50 V/V measurement is required in a switched circuit whose common-mode voltage remains between -4 V and 80 V. It is particularly appropriate for motor-control, solenoid, inverter, and industrial converter paths where PWM rejection and below-ground sensing add engineering value. INA240A2D-Q1 is the preferred alternative when the same electrical and footprint behavior is required with automotive qualification. Do not substitute a different INA240 gain option unless output scaling, signal-to-noise ratio, saturation margin, and ADC range are recalculated. Likewise, a lower-voltage current-sense amplifier may simplify cost or supply design, but it can constrain the available common-mode range. Before release, verify the shunt resistance and pulse rating, worst-case output swing, supply headroom, PCB layout, filtering bandwidth, and fault-current response.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ INA240A2D-Q1
Brand Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC
Device Type Bidirectional current-sense amplifier Bidirectional current-sense amplifier
Fixed Gain 50 V/V 50 V/V
Common-Mode Voltage Range -4 V to 80 V -4 V to 80 V
PWM Rejection Enhanced Enhanced
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C
Qualification Class Automotive temperature grade Automotive qualified

اہم امتیازی خصوصیات

  • Automotive-qualified same-family replacement (بمقابلہINA240A2D-Q1)
  • Wide common-mode operating window (بمقابلہINA240A2D-Q1)
  • PWM-oriented measurement architecture (بمقابلہINA240A2D-Q1)

ڈیزائن نوٹس

Place the INA240A2D close to the shunt and route IN+ and IN- as a short, tightly coupled differential pair. Keep switching-node copper, inductors, and high-current return paths away from the input and output pins. A compact placement reduces the area vulnerable to capacitive pickup from PWM edges, while symmetrical routing helps preserve differential behavior. Connect the device ground and exposed return structure according to the manufacturer pin-description and layout guidance.

Do not assume the common-mode rating is a substitute for a complete input-transient design. First confirm that the instantaneous shunt common-mode voltage remains between -4 V and 80 V, including ringing and overshoot. Second, verify that the amplifier supply provides sufficient input and output headroom. Third, calculate the nominal output as 50 times the shunt voltage and check that the expected positive and negative current peaks do not saturate the output.

Treat the shunt as part of the signal path, not merely as a power component. Select a Kelvin connection so high-current copper voltage drops do not appear between the amplifier inputs. If PWM transients require filtering, calculate resistor and capacitor values from the required attenuation and measurement bandwidth rather than adding large capacitors that can delay fault detection. Validate the completed layout under switching conditions with the intended shunt, ground plane, and enclosure arrangement.

Calculate shunt dissipation independently from amplifier power. Estimated: with shunt resistance R and current I, shunt power is P = I²R; for example, 2 A through 10 milliohms produces 40 mW. Use the worst-case peak, pulse duration, ambient temperature, and pulse-energy rating when selecting the shunt. This estimate does not include layout or connector resistance and does not replace the shunt manufacturer's derating guidance.

The INA240A2D uses a fixed 50 V/V gain, so input-referred offset and noise become increasingly important as shunt resistance and measured current decrease. Keep the shunt drop comfortably above the total input-error contribution while retaining enough headroom for transient peaks. For small-current measurements, compare the complete measurement bandwidth, shunt power, thermal drift, and ADC resolution rather than selecting gain solely from the instantaneous output voltage.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The INA240A2D is identified as an automotive-temperature-grade device, but a formal AEC-Q100 qualification status and specific environmental declarations require confirmation from the applicable ordering documentation.

متعلقہ تلاشیں

ina240a2d datasheet INA240A2D pinout INA240A2D datasheet PDF INA240A2D 50 V/V gain INA240A2D -4V to 80V INA240A2D 8 SOIC INA240A2D current sense amplifier INA240A2D motor control INA240A2D vs INA240A3D INA240A2D replacement INA240A2D drop-in alternative Texas Instruments INA240A2D INA240A2D price INA240A2D stock

متعلقہ اجزاء اور اصطلاحات

Texas Instruments INA240A2D INA240A2D-Q1 INA240A1D INA240A3D INA190A2 TSC2011 current-sense amplifier bidirectional amplifier instrumentation amplifier amplifier IC semiconductor common-mode voltage current measurement shunt resistor PWM rejection 50 V/V gain negative common mode 8-pin SOIC SOIC package family surface-mount package motor control industrial power conversion solenoid flyback RoHS
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں