IW611UK-A1CZ - Dual-Band Wi-Fi 6 + BT 5.4 SoC | NXP
MPN: IW611UK-A1CZ ✓ فعالIW611UK-A1CZ جائزہ
A Wi-Fi 6 combo SoC is a wireless system-on-chip that integrates the RF transceiver, baseband/MAC, memory, and power management needed to implement 802.11ax connectivity plus Bluetooth on one die. Within the wireless-connectivity hierarchy it sits below full gateway SoCs but above simple Bluetooth-only ICs, serving as the complete radio subsystem for smart and industrial devices.
Key features include dual-band 1x1 Wi-Fi 6 with OFDMA and MU-MIMO downlink support for congested RF environments, Bluetooth 5.4 with LE for long-range and low-power sensor links, and a very high level of integration that reduces system bill-of-materials cost. The single-chip approach removes the need for a separate Bluetooth controller and minimizes external components.
Architecturally, the IW611 combines a 2.4 GHz and 5 GHz radio front end, Wi-Fi 6 baseband, and Bluetooth controller with shared antenna switching, targeting low system cost. Concurrency between Wi-Fi and Bluetooth is managed on-chip, simplifying coexistence design compared with two-chip discrete solutions.
Typical applications include smart home devices and accessories, smart appliances, smart energy meters, industrial automation nodes, and embedded gateways, where dual-band Wi-Fi 6 throughput and BLE provisioning are both required in a compact footprint.
Design consideration: the 140-XFBGA WLCSP ball grid array requires careful PCB stackup and antenna keep-out planning; follow the NXP reference design for the RF matching network and power decoupling to meet regulatory and coexistence performance.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
کے لیے ڈراپ اِن متبادل IW611UK-A1CZ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
IW612UK-A1CZ
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
IW611UK-A1CZ تفصیلات
| Product Type | Wi-Fi 6 + Bluetooth 5.4 combo SoC |
| Wi-Fi Standard | 802.11ax (Wi-Fi 6) |
| Bluetooth Version | Bluetooth 5.4 / Bluetooth Low Energy |
| Frequency Bands | 2.4 GHz and 5 GHz dual-band |
| 5 GHz Frequency Range | 5.17 GHz to 5.895 GHz |
| Antenna Configuration | 1x1 (single stream) |
| سپلائی وولٹیج | 1.8 V to 3.3 V |
| پیکیج | 140-XFBGA, WLCSP |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Integration Level | Single-chip (RF, baseband, MAC, PMU integrated) |
| Target Applications | Smart home, smart appliances, smart energy, industrial automation, gateways |
| Category (DigiKey) | RF Transceiver ICs |
IW611UK-A1CZ 140-xfbga, wlcsp پن کنفیگریشن گائیڈ
IW611UK-A1CZ (140-xfbga, wlcsp پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں IW611UK-A1CZ.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
IW611UK-A1CZ کے لیے موزوں ہے 6 ایپلیکیشنs: Smart Home Devices, Smart Appliances, Smart Energy Metering, Industrial Automation Nodes, Embedded Gateways, Smart Devices and Accessories.
Smart Home Devices
The IW611UK/A1CZ fits smart home devices because it combines dual-band 1x1 Wi-Fi 6 and Bluetooth 5.4 Low Energy in one chip, eliminating a second radio IC and its coexistence circuitry. Wi-Fi 6 OFDMA improves responsiveness in homes crowded with 20+ connected devices, while BLE 5.4 handles out-of-box provisioning from a phone app. In a smart plug or thermostat, the IW611 sits on the main PCB with a shared 2.4/5 GHz antenna; the 1x1 configuration is sufficient for command/control traffic under 100 Mbps, and single-chip integration reduces BOM cost versus a two-chip Wi-Fi + BLE design.
تجویز کردہ
Smart Appliances
Smart refrigerators, washers, and ovens benefit from the IW611UK/A1CZ because appliances often sit in kitchens where the 2.4 GHz band is saturated; the 5 GHz band (5.17 GHz to 5.895 GHz) provides a cleaner channel for cloud telemetry and OTA firmware updates. The 1.8 V to 3.3 V supply range integrates with appliance main boards. NXP explicitly lists smart appliances among the IW611's target applications. Design consideration: metal appliance chassis require external or window-dip antennas, and Wi-Fi 6 power-save features keep standby energy consumption within energy-star limits.
تجویز کردہ
Smart Energy Metering
For smart energy meters and grid-edge devices, the IW611UK/A1CZ provides secure dual-band connectivity plus BLE 5.4 for local field-service commissioning via smartphone. NXP's product page names smart energy as a primary IW611 application. The highly integrated single-chip design helps meter manufacturers meet aggressive cost targets for high-volume deployment, while 1x1 Wi-Fi 6 delivers ample throughput for interval metering data and DLMS/COSEM payloads. BLE provisioning lets installers configure meter parameters on-site without a physical access point, and Wi-Fi 6 power management suits battery-assist meter variants.
تجویز کردہ
Industrial Automation Nodes
Industrial automation nodes - sensor gateways, machine monitors, and PLC peripherals - use the IW611UK/A1CZ where wireless flexibility is needed. The 5 GHz band avoids the interference from welders, motors, and legacy 2.4 GHz industrial Wi-Fi, while Bluetooth 5.4 supports maintenance diagnostics via ruggedized handhelds. NXP lists industrial automation among the IW611's target segments. Single-chip integration shortens qualification cycles because one wireless module covers both data backhaul and local commissioning. Verify extended temperature ratings and conformal-coating compatibility against the datasheet for harsh factory-floor conditions.
تجویز کردہ
Embedded Gateways
Embedded gateways bridging sensor networks to the cloud use the IW611UK/A1CZ as the Wi-Fi 6 uplink radio. Its dual-band 1x1 architecture provides congestion-robust backhaul on 5 GHz while BLE 5.4 onboards nearby battery-powered sensor nodes during commissioning. Per NXP documentation, gateways are a primary IW611 application, and the high integration level keeps gateway BOM cost low compared with discrete radio pairs. Typical placement pairs the IW611 with a host MCU or applications processor over the host interface; Wi-Fi 6 OFDMA helps when the gateway aggregates dozens of concurrent IoT clients.
تجویز کردہ
Smart Devices and Accessories
Connected accessories such as trackers, wearables-adjacent hubs, and smart gadget accessories adopt the IW611UK/A1CZ for its compact 140-ball WLCSP package and dual-radio capability. BLE 5.4 provides the low-energy tether to the user's phone, while Wi-Fi 6 offers high-bandwidth cloud sync when a home network is available - a combination single-radio parts cannot deliver. The 1.8 V to 3.3 V supply range suits battery-powered designs with efficient regulators. NXP names smart devices and accessories as a core IW611 market; the single-chip design minimizes PCB area in space-constrained accessory enclosures.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا IW611UK-A1CZ — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | IW612UK-A1CZ |
|---|---|---|
| Package | 140-XFBGA, WLCSP | 140-XFBGA, WLCSP - verify ball map |
| Brand | NXP Semiconductors | NXP Semiconductors |
| Wi-Fi Standard | Wi-Fi 6 (802.11ax) | Wi-Fi 6 (802.11ax) |
| Bluetooth Version | Bluetooth 5.4 / LE | Bluetooth 5.4 / LE |
| Bands | 2.4 GHz + 5 GHz | 2.4 GHz + 5 GHz |
| 5 GHz Range | 5.17 GHz to 5.895 GHz | 5.17 GHz to 5.895 GHz |
| Supply Voltage | 1.8 V to 3.3 V | 1.8 V to 3.3 V |
| Extended Protocols (802.15.4/Thread) | No | Yes (family variant) |
| Lifecycle Status | Active | Active |
اہم امتیازی خصوصیات
- Single-chip dual-radio integration (بمقابلہDiscrete Wi-Fi 6 + BLE two-chip solutions)
- Bluetooth 5.4 (latest core version) (بمقابلہIW612 family is equivalent, but older combo SoCs ship BT 5.2/5.3)
- Cost-optimized vs family sibling (بمقابلہIW612UK-A1CZ)
ڈیزائن نوٹس
The IW611UK/A1CZ uses a 140-ball XFBGA WLCSP package, which demands tight PCB stackup control: typical WLCSP routing requires microvia-in-pad or via-in-pad with filled vias under the ball array. Follow the NXP IW611 reference design for RF trace geometry - keep the antenna feed line at 50 ohms with a solid ground reference, and maintain the recommended antenna keep-out zone. Place the RF matching network components exactly per the reference design because WLCSP parasitics are included in NXP's matching calculations.
Supply the IW611UK/A1CZ from a clean 1.8 V to 3.3 V rail per distributor-verified specifications. RF transmit bursts create load transients; use the decoupling network from the NXP reference design (bulk plus high-frequency ceramics at each supply ball group) to minimize supply ripple that degrades EVM and phase noise. Estimate: peak transmit current is not published in the provided web data - confirm per-rail current figures from the IW611 datasheet power-management section before sizing your DC-DC converter.
Do not assume software compatibility with other vendors' Wi-Fi combo chips - the IW611 uses NXP's wireless software stack and driver ecosystem, so plan your host driver integration early. Additionally, dual-band operation requires dual-band antenna hardware; a 2.4 GHz-only antenna will severely degrade 5 GHz (5.17-5.895 GHz) performance. Finally, verify regulatory domain settings (FCC/ETSI channel and power tables) in firmware before certification testing.
تعمیل کی معلومات
Compliance status was not stated in the provided web data. Modern NXP products are typically RoHS compliant; confirm on the official NXP product page for IW611UK before procurement.
