IW611UK-A1CZ - Dual-Band Wi-Fi 6 + BT 5.4 SoC | NXP
부품 번호: IW611UK-A1CZ ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $4.2 | $4.20 |
| 10 | $3.85 | $38.50 |
| 100 | $3.4 | $340.00 |
| 500 | $3.05 | $1,525.00 |
| 1,000 | $2.75 | $2,750.00 |
IW611UK-A1CZ 개요
A Wi-Fi 6 combo SoC is a wireless system-on-chip that integrates the RF transceiver, baseband/MAC, memory, and power management needed to implement 802.11ax connectivity plus Bluetooth on one die. Within the wireless-connectivity hierarchy it sits below full gateway SoCs but above simple Bluetooth-only ICs, serving as the complete radio subsystem for smart and industrial devices.
Key features include dual-band 1x1 Wi-Fi 6 with OFDMA and MU-MIMO downlink support for congested RF environments, Bluetooth 5.4 with LE for long-range and low-power sensor links, and a very high level of integration that reduces system bill-of-materials cost. The single-chip approach removes the need for a separate Bluetooth controller and minimizes external components.
Architecturally, the IW611 combines a 2.4 GHz and 5 GHz radio front end, Wi-Fi 6 baseband, and Bluetooth controller with shared antenna switching, targeting low system cost. Concurrency between Wi-Fi and Bluetooth is managed on-chip, simplifying coexistence design compared with two-chip discrete solutions.
Typical applications include smart home devices and accessories, smart appliances, smart energy meters, industrial automation nodes, and embedded gateways, where dual-band Wi-Fi 6 throughput and BLE provisioning are both required in a compact footprint.
Design consideration: the 140-XFBGA WLCSP ball grid array requires careful PCB stackup and antenna keep-out planning; follow the NXP reference design for the RF matching network and power decoupling to meet regulatory and coexistence performance.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: IW611UK-A1CZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
IW612UK-A1CZ
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
IW611UK-A1CZ 사양
| Product Type | Wi-Fi 6 + Bluetooth 5.4 combo SoC |
| Wi-Fi Standard | 802.11ax (Wi-Fi 6) |
| Bluetooth Version | Bluetooth 5.4 / Bluetooth Low Energy |
| Frequency Bands | 2.4 GHz and 5 GHz dual-band |
| 5 GHz Frequency Range | 5.17 GHz to 5.895 GHz |
| Antenna Configuration | 1x1 (single stream) |
| 공급 전압 | 1.8 V to 3.3 V |
| 패키지 | 140-XFBGA, WLCSP |
| 실장 유형 | Surface Mount |
| Integration Level | Single-chip (RF, baseband, MAC, PMU integrated) |
| Target Applications | Smart home, smart appliances, smart energy, industrial automation, gateways |
| Category (DigiKey) | RF Transceiver ICs |
IW611UK-A1CZ 140-xfbga, wlcsp 핀 구성 가이드
IW611UK-A1CZ(140-xfbga, wlcsp 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: IW611UK-A1CZ.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
IW611UK-A1CZ 적합 용도: 6 애플리케이션s: Smart Home Devices, Smart Appliances, Smart Energy Metering, Industrial Automation Nodes, Embedded Gateways, Smart Devices and Accessories.
Smart Home Devices
The IW611UK/A1CZ fits smart home devices because it combines dual-band 1x1 Wi-Fi 6 and Bluetooth 5.4 Low Energy in one chip, eliminating a second radio IC and its coexistence circuitry. Wi-Fi 6 OFDMA improves responsiveness in homes crowded with 20+ connected devices, while BLE 5.4 handles out-of-box provisioning from a phone app. In a smart plug or thermostat, the IW611 sits on the main PCB with a shared 2.4/5 GHz antenna; the 1x1 configuration is sufficient for command/control traffic under 100 Mbps, and single-chip integration reduces BOM cost versus a two-chip Wi-Fi + BLE design.
추천
Smart Appliances
Smart refrigerators, washers, and ovens benefit from the IW611UK/A1CZ because appliances often sit in kitchens where the 2.4 GHz band is saturated; the 5 GHz band (5.17 GHz to 5.895 GHz) provides a cleaner channel for cloud telemetry and OTA firmware updates. The 1.8 V to 3.3 V supply range integrates with appliance main boards. NXP explicitly lists smart appliances among the IW611's target applications. Design consideration: metal appliance chassis require external or window-dip antennas, and Wi-Fi 6 power-save features keep standby energy consumption within energy-star limits.
추천
Smart Energy Metering
For smart energy meters and grid-edge devices, the IW611UK/A1CZ provides secure dual-band connectivity plus BLE 5.4 for local field-service commissioning via smartphone. NXP's product page names smart energy as a primary IW611 application. The highly integrated single-chip design helps meter manufacturers meet aggressive cost targets for high-volume deployment, while 1x1 Wi-Fi 6 delivers ample throughput for interval metering data and DLMS/COSEM payloads. BLE provisioning lets installers configure meter parameters on-site without a physical access point, and Wi-Fi 6 power management suits battery-assist meter variants.
추천
Industrial Automation Nodes
Industrial automation nodes - sensor gateways, machine monitors, and PLC peripherals - use the IW611UK/A1CZ where wireless flexibility is needed. The 5 GHz band avoids the interference from welders, motors, and legacy 2.4 GHz industrial Wi-Fi, while Bluetooth 5.4 supports maintenance diagnostics via ruggedized handhelds. NXP lists industrial automation among the IW611's target segments. Single-chip integration shortens qualification cycles because one wireless module covers both data backhaul and local commissioning. Verify extended temperature ratings and conformal-coating compatibility against the datasheet for harsh factory-floor conditions.
추천
Embedded Gateways
Embedded gateways bridging sensor networks to the cloud use the IW611UK/A1CZ as the Wi-Fi 6 uplink radio. Its dual-band 1x1 architecture provides congestion-robust backhaul on 5 GHz while BLE 5.4 onboards nearby battery-powered sensor nodes during commissioning. Per NXP documentation, gateways are a primary IW611 application, and the high integration level keeps gateway BOM cost low compared with discrete radio pairs. Typical placement pairs the IW611 with a host MCU or applications processor over the host interface; Wi-Fi 6 OFDMA helps when the gateway aggregates dozens of concurrent IoT clients.
추천
Smart Devices and Accessories
Connected accessories such as trackers, wearables-adjacent hubs, and smart gadget accessories adopt the IW611UK/A1CZ for its compact 140-ball WLCSP package and dual-radio capability. BLE 5.4 provides the low-energy tether to the user's phone, while Wi-Fi 6 offers high-bandwidth cloud sync when a home network is available - a combination single-radio parts cannot deliver. The 1.8 V to 3.3 V supply range suits battery-powered designs with efficient regulators. NXP names smart devices and accessories as a core IW611 market; the single-chip design minimizes PCB area in space-constrained accessory enclosures.
추천
추천 제품 요약
엔지니어링 참조 데이터: IW611UK-A1CZ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | IW612UK-A1CZ |
|---|---|---|
| Package | 140-XFBGA, WLCSP | 140-XFBGA, WLCSP - verify ball map |
| Brand | NXP Semiconductors | NXP Semiconductors |
| Wi-Fi Standard | Wi-Fi 6 (802.11ax) | Wi-Fi 6 (802.11ax) |
| Bluetooth Version | Bluetooth 5.4 / LE | Bluetooth 5.4 / LE |
| Bands | 2.4 GHz + 5 GHz | 2.4 GHz + 5 GHz |
| 5 GHz Range | 5.17 GHz to 5.895 GHz | 5.17 GHz to 5.895 GHz |
| Supply Voltage | 1.8 V to 3.3 V | 1.8 V to 3.3 V |
| Extended Protocols (802.15.4/Thread) | No | Yes (family variant) |
| Lifecycle Status | Active | Active |
주요 차별점
- Single-chip dual-radio integration (vs Discrete Wi-Fi 6 + BLE two-chip solutions)
- Bluetooth 5.4 (latest core version) (vs IW612 family is equivalent, but older combo SoCs ship BT 5.2/5.3)
- Cost-optimized vs family sibling (vs IW612UK-A1CZ)
설계 노트
The IW611UK/A1CZ uses a 140-ball XFBGA WLCSP package, which demands tight PCB stackup control: typical WLCSP routing requires microvia-in-pad or via-in-pad with filled vias under the ball array. Follow the NXP IW611 reference design for RF trace geometry - keep the antenna feed line at 50 ohms with a solid ground reference, and maintain the recommended antenna keep-out zone. Place the RF matching network components exactly per the reference design because WLCSP parasitics are included in NXP's matching calculations.
Supply the IW611UK/A1CZ from a clean 1.8 V to 3.3 V rail per distributor-verified specifications. RF transmit bursts create load transients; use the decoupling network from the NXP reference design (bulk plus high-frequency ceramics at each supply ball group) to minimize supply ripple that degrades EVM and phase noise. Estimate: peak transmit current is not published in the provided web data - confirm per-rail current figures from the IW611 datasheet power-management section before sizing your DC-DC converter.
Do not assume software compatibility with other vendors' Wi-Fi combo chips - the IW611 uses NXP's wireless software stack and driver ecosystem, so plan your host driver integration early. Additionally, dual-band operation requires dual-band antenna hardware; a 2.4 GHz-only antenna will severely degrade 5 GHz (5.17-5.895 GHz) performance. Finally, verify regulatory domain settings (FCC/ETSI channel and power tables) in firmware before certification testing.
규정 준수 정보
Compliance status was not stated in the provided web data. Modern NXP products are typically RoHS compliant; confirm on the official NXP product page for IW611UK before procurement.
