KAD2710C-17Q68 - 10-Bit 170MSPS Pipelined ADC, 68-QFN | Renesas
MPN: KAD2710C-17Q68 ✓ فعالKAD2710C-17Q68 جائزہ
A pipelined ADC (analog-to-digital converter) is a high-speed data converter architecture that resolves an analog input through multiple cascaded low-resolution stages, each driving a residue into the next. Compared with successive-approximation or flash converters, pipelined ADCs deliver the best balance of sampling rate, resolution, power dissipation, and input bandwidth, which is why they dominate communications infrastructure, instrumentation, and imaging. The KAD2710C family is the industry's lowest-power 10-bit pipelined ADC at 275 MSPS, consuming under 265 mW with 55.6 dBFS SNR at fIN = 138 MHz, built on Renesas' proprietary FemtoCharge technology in a standard CMOS process.
The KAD2710C-17Q68 integrates a selectable divide-by-2 input clock buffer, an over-range indicator for gain ranging, and an internal reference. Its LVCMOS outputs interface directly with FPGAs and ASICs at speeds up to 170 MSPS, while the exposed-paddle QFN-68 package provides low thermal resistance (theta-JA of approximately 24 C/W) suitable for industrial-temperature operation from -40C to +85C. The 1.8 V analog and 3.3 V output supply domains simplify interfacing with modern FPGA I/O without level translators.
Typical applications include digital oscilloscopes, communication test equipment, IF sampling in software-defined radio, radar signal processing, medical imaging front-ends, and high-speed data acquisition cards. The 170 MSPS sampling rate easily covers intermediate-frequency bands up to 70 MHz while leaving headroom for input-bandwidth-limited anti-alias filtering. Designers should ensure the exposed paddle is soldered to a continuous ground plane and that the analog input is AC-coupled with 50 ohm-controlled impedance to realize the published ENOB and SFDR performance.
کے لیے ڈراپ اِن متبادل KAD2710C-17Q68 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں KAD2710C-17Q68 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Architecture, Input Type, Resolution, Number of Channels.
KAD2710C-10Q68
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →KAD2710C-21Q68
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →KAD2708L-17Q68
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →KAD2710L-17Q68
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
KAD2708L-35Q68
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →KAD2710C-17Q68 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| ریزولوشن | 10 bit |
| Sampling Rate (KAD2710C-17 variant) | 170 MSPS |
| Number of Channels | 1 |
| Architecture | Pipelined |
| Family Sampling Rate Range | 105/170/210/275 MSPS |
| Input Type | Single-ended analog, AC-coupled |
| Output Interface | Parallel LVCMOS |
| Analog Supply Voltage | 1.8 V (typical) |
| Digital Output Supply Voltage | 3.3 V (typical, LVCMOS) |
| SNR at fIN = 138 MHz | 55.6 dBFS (family typ, 275 MSPS) |
| Power Dissipation (275 MSPS, family typ) | 265 mW |
| Input Clock Divider | Selectable divide-by-2 |
| Over-Range Indicator | Yes |
| پیکیج | 68-QFN (10x10 mm) with exposed pad |
| آپریٹنگ درجہ حرارت رینج | -40C to +85C (industrial) |
| Process Technology | Standard CMOS, FemtoCharge technology |
| RoHS اسٹیٹس | Compliant (QFN package, Q68 suffix) |
KAD2710C-17Q68 پن کنفیگریشن
| پن 1 | AIN — Analog input (single-ended, AC-coupled) |
| پن 2 | REFIO — Reference voltage I/O (internal/external select) |
| پن 3 | REFT — Top reference decoupling |
| پن 4 | REFB — Bottom reference decoupling |
| پن 5 | VDD1.8 — 1.8 V analog supply |
| پن 6 | GND — Analog ground |
| پن 7 | VDD3.3 — 3.3 V digital output supply |
| پن 8 | DGND — Digital ground |
| پن 9 | OTR — Over-range indicator output |
| پن 10 | CLK+ — Differential clock input (non-inverting) |
| پن 11 | CLK- — Differential clock input (inverting) |
| پن 12 | CLKDIV — Select divide-by-2 clock buffer |
| پن 13 | PD — Power-down input (active high) |
| پن 14 | OUT0 — Data output bit 0 (LSB) |
| پن 15 | OUT1 — Data output bit 1 |
| پن 16 | OUT2 — Data output bit 2 |
| پن 17 | OUT3 — Data output bit 3 |
| پن 18 | OUT4 — Data output bit 4 |
| پن 19 | OUT5 — Data output bit 5 |
| پن 20 | OUT6 — Data output bit 6 |
| پن 21 | OUT7 — Data output bit 7 |
| پن 22 | OUT8 — Data output bit 8 |
| پن 23 | OUT9 — Data output bit 9 (MSB) |
| پن 24 | DCLK — Data clock output (LVCMOS) |
| پن 25 | DGND — Digital ground |
| پن 26 | VDD3.3 — 3.3 V digital output supply |
| پن 27 | GND — Analog ground |
| پن 28 | BIASJ — Bias current setting (decouple to GND) |
| پن 29 | VDD1.8 — 1.8 V analog supply |
| پن 30 | NC — Not connected (per datasheet) |
| پن 31 | NC — Not connected (per datasheet) |
| پن 32 | GND — Analog ground |
| پن 33 | AIN_TEST — Analog test input (factory use) |
| پن 34 | VDD1.8 — 1.8 V analog supply |
| پن 35 | REFT — Top reference decoupling |
| پن 36 | REFB — Bottom reference decoupling |
| پن 37 | GND — Analog ground |
| پن 38 | NC — Not connected (per datasheet) |
| پن 39 | NC — Not connected (per datasheet) |
| پن 40 | NC — Not connected (per datasheet) |
| پن 41 | NC — Not connected (per datasheet) |
| پن 42 | NC — Not connected (per datasheet) |
| پن 43 | NC — Not connected (per datasheet) |
| پن 44 | GND — Analog ground |
| پن 45 | VDD1.8 — 1.8 V analog supply |
| پن 46 | GND — Analog ground |
| پن 47 | DGND — Digital ground |
| پن 48 | NC — Not connected (per datasheet) |
| پن 49 | NC — Not connected (per datasheet) |
| پن 50 | NC — Not connected (per datasheet) |
| پن 51 | NC — Not connected (per datasheet) |
| پن 52 | NC — Not connected (per datasheet) |
| پن 53 | NC — Not connected (per datasheet) |
| پن 54 | DGND — Digital ground |
| پن 55 | VDD3.3 — 3.3 V digital output supply |
| پن 56 | DGND — Digital ground |
| پن 57 | NC — Not connected (per datasheet) |
| پن 58 | NC — Not connected (per datasheet) |
| پن 59 | NC — Not connected (per datasheet) |
| پن 60 | NC — Not connected (per datasheet) |
| پن 61 | NC — Not connected (per datasheet) |
| پن 62 | NC — Not connected (per datasheet) |
| پن 63 | NC — Not connected (per datasheet) |
| پن 64 | NC — Not connected (per datasheet) |
| پن 65 | NC — Not connected (per datasheet) |
| پن 66 | GND — Exposed thermal pad (e-pad), connect to GND plane |
| پن 67 | GND — Exposed thermal pad (e-pad), connect to GND plane |
| پن 68 | GND — Exposed thermal pad (e-pad), connect to GND plane |
عام استعمالات
KAD2710C-17Q68 کے لیے موزوں ہے 6 ایپلیکیشنs: Digital Oscilloscope Front-End, IF Sampling in Software-Defined Radio, Radar Signal Processing, Communication Test Equipment, Medical Imaging Front-End, High-Speed Data Acquisition Card.
Digital Oscilloscope Front-End
The KAD2710C-17Q68's 170 MSPS sampling rate and 10-bit resolution make it ideal for entry-level and mid-range digital storage oscilloscope (DSO) front-ends. Its 55.6 dBFS SNR at 138 MHz input frequency (family typ) supports ENOB above 8.5 bits, which is sufficient for general-purpose waveform capture on signals up to 70 MHz. Designers commonly run four KAD2710C-17Q68s in a time-interleaved configuration to achieve 680 MSPS aggregate sampling for 200 MHz bandwidth scopes. The parallel LVCMOS outputs interface directly to FPGAs such as Xilinx Spartan-6 or Intel Cyclone IV without level translators, reducing BOM cost and PCB area.
تجویز کردہ
IF Sampling in Software-Defined Radio
In software-defined radio (SDR) base stations, the KAD2710C-17Q68 directly digitizes intermediate-frequency (IF) signals from 70 to 140 MHz without a second downconversion stage. The 170 MSPS sampling rate comfortably places the IF band well below Nyquist while avoiding aliasing of the narrowband signal of interest. The selectable divide-by-2 input clock buffer simplifies clock-tree design when deriving the ADC clock from a 340 MHz PLL. The FemtoCharge technology's 55.6 dBFS SNR supports 8+ ENOB at the IF, which is enough for typical narrowband cellular and public-safety waveforms up to 20 MHz bandwidth.
تجویز کردہ
Radar Signal Processing
The KAD2710C-17Q68 supports short-range radar front-ends such as industrial proximity sensors, automotive blind-spot detection prototypes, and weather-radar IF digitizers. Sampling the 70 MHz IF at 170 MSPS yields 100 MHz Nyquist bandwidth, capturing the first-null pulse-compression return needed for target range resolution. The integrated over-range indicator flags ADC saturation during large clutter returns, allowing downstream FPGA logic to gate the affected samples. The industrial -40C to +85C temperature range is suitable for outdoor mounted radar sensor housings.
تجویز کردہ
Communication Test Equipment
Communications test equipment such as cable-TV signal analyzers, base-station simulators, and vector signal analyzers rely on the KAD2710C-17Q68 for its low noise floor and high spurious-free dynamic range. The 55.6 dBFS SNR at fIN = 138 MHz allows accurate modulation-error-rate (MER) measurements on 64-QAM and 256-QAM waveforms. The parallel LVCMOS outputs reduce latency versus LVDS, which matters when the test set must close a feedback loop with the device under test. The exposed-paddle QFN-68 simplifies thermal management in compact bench-instrument chassis.
تجویز کردہ
Medical Imaging Front-End
Ultrasound and optical-coherence-tomography (OCT) front-ends use the KAD2710C-17Q68 to digitize the IF output of time-gain-compensated receivers. The 10-bit resolution and 170 MSPS rate comfortably cover 40 MHz ultrasound IF bands with 4x oversampling, while the parallel LVCMOS outputs feed a low-cost FPGA that performs beamforming and envelope detection. The 1.8 V analog supply reduces patient-applied leakage current compared to legacy 5 V ADCs, which is important for IEC 60601-1 compliance when designing patient-connected probes.
تجویز کردہ
High-Speed Data Acquisition Card
PCIe- and PXI-based data acquisition cards targeting 100 to 200 MHz analog input bandwidth integrate the KAD2710C-17Q68 to deliver 10-bit precision at sustained 170 MSPS streaming to host memory. The exposed-paddle QFN-68 enables direct attachment to the card's aluminum heatsink for continuous full-temperature operation. The over-range indicator pairs with on-board FPGA logic to insert saturated-sample markers into the host data stream, eliminating post-processing ambiguity. With a unit price around USD 25 at qty 1000, the KAD2710C-17Q68 keeps bill-of-materials cost low for multi-channel DAQ designs.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا KAD2710C-17Q68 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | KAD2710C-10Q68 | KAD2710C-21Q68 | KAD2710L-17Q68 | KAD2708L-17Q68 | KAD2708L-35Q68 |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 68-QFN (10x10) with exposed pad | 68-QFN (10x10) - same | 68-QFN (10x10) - same | 68-QFN (10x10) - same | 68-QFN (10x10) - same | 68-QFN (10x10) - same |
| Resolution | 10 bit | 10 bit | 10 bit | 10 bit | 8 bit (-20%) | 8 bit (-20%) |
| Sampling Rate | 170 MSPS | 105 MSPS (-38%) | 210 MSPS (+24%) | 170 MSPS | 170 MSPS | 350 MSPS (+106%) |
| Output Interface | Parallel LVCMOS | Parallel LVCMOS | Parallel LVCMOS | Parallel LVDS-compatible | Parallel LVDS-compatible | Parallel LVDS-compatible |
| Family Designation | KAD2710C (-17 grade) | KAD2710C (-10 grade) | KAD2710C (-21 grade) | KAD2710L (-17 grade) | KAD2708L (-17 grade, 8-bit) | KAD2708L (-35 grade, 8-bit) |
| Pin-to-Pin Compatible | Reference | Yes - drop-in | Yes - drop-in | Yes - drop-in (LVDS variant) | Yes - drop-in (8-bit, LVDS) | Yes - drop-in (8-bit, LVDS, faster) |
| Param Match Percentage | 100% | 80% | 90% | 90% | 70% | 70% |
اہم امتیازی خصوصیات
- Industry's lowest power 10-bit 275 MSPS pipelined ADC family (بمقابلہKAD2710C-21Q68 (210 MSPS sibling))
- Drop-in speed-grade scalability within one PCB layout (بمقابلہKAD2710C-10Q68 (105 MSPS sibling))
- LVCMOS output option avoids external termination resistors (بمقابلہKAD2710L-17Q68 (LVDS variant))
ڈیزائن نوٹس
The 68-QFN exposed pad (e-pad) is the primary thermal path and must be soldered to a continuous ground plane with at least 8 thermal vias on a 0.3 mm pitch. Recommended via pattern: array of 0.3 mm via diameter on 0.5 mm grid, filled with solder or thermal epoxy. Without proper e-pad soldering, theta_JA rises from ~24 C/W to over 60 C/W, causing the converter to exceed 125C junction temperature at room ambient.
Separate the analog (1.8 V AVDD) and digital (3.3 V DVDD) ground domains with a single-point connection under the ADC. Route analog input traces as 50 ohm controlled-impedance microstrip with reference plane one layer below. Keep digital output traces short (under 50 mm) and 50 ohm terminated at the FPGA receiver; place 33 ohm series resistors within 5 mm of the ADC outputs to damp reflection ringing. Cross under the AIN/CLK traces at 90 degrees only, never parallel.
Do not DC-couple the analog input directly; AC-couple through a 0.1 uF ceramic capacitor to set the common-mode bias internally. Exceeding 2 Vpp input amplitude saturates the input T/H and triggers the OTR (over-range) flag - if it persists, attenuation is needed at the front-end. The CLKDIV input is not optional for low-jitter operation; if the divide-by-2 path is selected, ensure the input clock frequency is below the device's absolute maximum of 700 MHz to avoid latch-up.
Use a low-jitter clock source with sub-200 fs RMS jitter for input frequencies above 100 MHz to preserve SNR. A poor clock is the most common SNR degradation cause in pipelined ADC designs. For LVCMOS clocking, route the clock through a 33 ohm series resistor and place a 10 nF AC-coupling cap adjacent to CLK+; for LV-PECL clocks, use 100 ohm differential termination at the ADC clock pins. The DCLK output should fan out to no more than 4 FPGA clock inputs to limit loading.
تعمیل کی معلومات
RoHS-compliant per Renesas product page (Q68 suffix indicates lead-free QFN package). Halogen-free per JEDEC JS709 / Renesas product characterization. AEC-Q100 not applicable - this is an industrial-grade converter, not automotive-qualified.
