Microchip Technology

KSZ8765CLXIC - 5-Port Managed Ethernet Switch | Microchip

MPN: KSZ8765CLXIC ✓ فعال
80-lead LQFP Package 10/100 Mbps Speed
MOQ: 1 |

KSZ8765CLXIC جائزہ

The Microchip Technology KSZ8765CLXIC is a highly integrated, Layer 2-managed, five-port Ethernet switch for embedded networking systems. It combines four 10/100 Mbps copper ports with one 10/100/1000 Mbps Gigabit uplink, supports 100Base-FX fiber connectivity, and provides configurable GMII, RGMII, MII, and RMII host interfaces. The device is packaged in an 80-lead LQFP measuring 10 mm by 10 mm.

An Ethernet switch is a Layer 2 network-semiconductor device that receives Ethernet frames on one port, examines their destination addresses, and forwards traffic to the appropriate port or ports. A managed switch adds configurable status, control, and monitoring functions to this basic forwarding role. The KSZ8765 belongs to the broader hierarchy of Ethernet switch, network interface controller, communications semiconductor, and integrated circuit.

Key features include five integrated switch ports, Layer 2 management, 10/100 Mbps copper networking, a Gigabit uplink, and support for both fiber and copper media. Its configurable GMII, RGMII, MII, and RMII interfaces allow it to connect with microcontrollers, network processors, FPGAs, and other Ethernet-capable system controllers. The hardware design checklist identifies Ports 1 and 2 as 100Base-FX fiber ports, Ports 3 and 4 as 10/100Base-T/TX copper ports, and Port 5 as a configurable uplink supporting GMII, RGMII, MII, or RMII.

The KSZ8765CLXIC is designed to reduce the component count of embedded Ethernet equipment by combining multiple physical-layer interfaces, switching logic, and management functions in one package. This integration can simplify board partitioning while preserving separate copper and fiber connectivity. Its architecture is particularly useful when an equipment maker needs a managed industrial network interface without implementing five discrete Ethernet PHYs and an external switch controller.

Typical uses include industrial Ethernet equipment, factory automation controllers, embedded gateways, telecom access hardware, network appliances, and optical-to-copper network bridges. The device can support equipment that bridges legacy 10/100 Mbps copper links to a faster Gigabit uplink while retaining access to optical ports for longer-distance or electrically isolated links.

Designers should follow the Microchip KSZ8765CLX Hardware Design Checklist when assigning the clock, management interface, media-dependent interfaces, power rails, and reset or configuration signals. The complete electrical limits, recommended operating conditions, transceiver details, internal register functions, and signal timing must be taken from the manufacturer datasheet rather than inferred from the product summary.

This page combines the manufacturer product description, package and interface facts, pricing-page information, and hardware-design guidance into an application-focused guide. It also distinguishes directly documented characteristics from electrical parameters that require confirmation from the complete KSZ8765 datasheet.

کے لیے ڈراپ اِن متبادل KSZ8765CLXIC — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

KSZ8765CLXIC زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Device Type Layer 2-managed Ethernet switch
Total Switch Ports 5 ports
Copper Port Speed 10/100 Mbps
Copper Port Count 4 ports
Gigabit Uplink Port 1 port at 10/100/1000 Mbps
Fiber Port Speed 100 Mbps 100Base-FX
Fiber Port Count 2 ports
Host Interface Support GMII, RGMII, MII, and RMII
Network Layer Layer 2
Management Capability Managed switching
Package Type 80-lead LQFP
Package Dimensions 10 mm x 10 mm
ماؤنٹنگ ٹائپ Surface mount

KSZ8765CLXIC 10 mm x 10 mm پن کنفیگریشن گائیڈ

KSZ8765CLXIC (10 mm x 10 mm پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

KSZ8765CLXIC کے لیے 10 mm x 10 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں KSZ8765CLXIC.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

KSZ8765CLXIC کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Ethernet Gateway, Fiber-to-Copper Network Bridge, Factory Automation Controller, Embedded Network Processor Platform, Telecom Access Equipment, FPGA-Based Network Appliance.

🏭

Industrial Ethernet Gateway

The KSZ8765CLXIC fits an industrial gateway that must combine legacy 10/100 Mbps equipment with a faster network uplink. Four 10/100 Mbps copper ports support devices such as programmable controllers, sensors, and service equipment, while the 10/100/1000 Mbps uplink carries aggregate traffic toward a plant network or controller. Its managed Layer 2 operation provides a more structured platform than a collection of isolated PHYs. The copper transceiver magnetics, surge protection, power rails, and host-interface timing must be implemented according to the Microchip hardware design checklist, especially where the gateway must withstand industrial electrical transients.

🌐

Fiber-to-Copper Network Bridge

The KSZ8765CLXIC is well suited to bridging 100 Mbps fiber links with 10/100 Mbps copper endpoints. The hardware design checklist assigns Ports 1 and 2 to 100Base-FX, Ports 3 and 4 to 10/100Base-T/TX, and Port 5 to the configurable uplink, allowing optical and copper traffic to coexist within one switch. This arrangement supports industrial cabinets, remote terminals, and telecom access equipment where copper reach is limited or where optical links provide galvanic separation. Fiber magnetics or transceivers, loss-of-signal handling, line coding, and the uplink interface still require full circuit validation.

🏭

Factory Automation Controller

A factory automation controller can use the KSZ8765CLXIC to connect local equipment without requiring several standalone Ethernet controllers. Four 10/100 Mbps copper ports can serve programmable logic, remote I/O, vision equipment, or service interfaces, while the Gigabit uplink provides a faster path to a supervisory network. Managed Layer 2 features make the switch more appropriate than a basic unmanaged device for controlled networks requiring status monitoring and configuration. The design must account for the controller's supported MII, RMII, GMII, or RGMII mode and should follow the manufacturer checklist for clocking, decoupling, media interfaces, and board layout.

🖥️

Embedded Network Processor Platform

The KSZ8765CLXIC can provide the physical-layer switching front end for an embedded network processor or FPGA-based communications platform. A processor with RGMII or GMII can use the configurable uplink for high-throughput traffic, while four copper ports support external endpoints and two fiber ports support backhaul or industrial links. Integrating the switch into the host design reduces the number of external PHYs required. The host interface must be configured for the correct clock mode and timing, and copper magnetics, termination, isolation, and supply sequencing must follow the Microchip hardware design guidance to avoid link instability.

🌐

Telecom Access Equipment

The KSZ8765CLXIC can support telecom access equipment that needs several local 10/100 Mbps service ports, fiber uplinks, and a configurable host connection. The five-port managed-switch architecture allows service cards or embedded modules to share a common switching fabric without using a discrete controller and multiple PHY devices. The Gigabit uplink is useful for backbone aggregation, while 100Base-FX options support fiber-based access links. In a telecom-grade enclosure, designers must verify temperature limits, power integrity, electromagnetic compatibility, and connector isolation directly from the electrical specifications rather than assuming compliance from the product family name.

🖥️

FPGA-Based Network Appliance

The KSZ8765CLXIC suits FPGA-based appliances in which several physical network interfaces must connect to programmable logic. Four copper ports can expose service, management, or downstream links; two 100Base-FX ports support optical connectivity; and Port 5 can expose RGMII, GMII, MII, or RMII to the FPGA. The configurable uplink lets one switch family address different host-controller designs. Because FPGA I/O timing, clocking, and management firmware must match the selected interface mode, engineers should use the manufacturer's timing tables and reference implementation rather than treating all interface options as simultaneously available.

What is the KSZ8765CLXIC?
The KSZ8765CLXIC is a Microchip Technology Layer 2-managed, five-port Ethernet switch with four 10/100 Mbps copper ports and one 10/100/1000 Mbps Gigabit uplink. According to the manufacturer product page, it also supports 100Base-FX connectivity and configurable GMII, RGMII, MII, and RMII interfaces. It is intended for cost-sensitive embedded systems that need integrated copper, fiber, and host-controller networking in one 80-lead LQFP package.
How many Ethernet ports does the KSZ8765CLXIC have?
The KSZ8765CLXIC provides five integrated Ethernet switch ports. The product description identifies four 10/100 Mbps copper ports and one 10/100/1000 Mbps Gigabit uplink. The Microchip hardware design checklist further assigns Ports 1 and 2 to 100Base-FX fiber, Ports 3 and 4 to 10/100Base-T/TX copper, and Port 5 to the configurable GMII, RGMII, MII, or RMII uplink.
Which host interfaces are supported by the KSZ8765CLXIC?
The KSZ8765CLXIC supports GMII, RGMII, MII, and RMII host interfaces. According to the Microchip KSZ8765CLX Hardware Design Checklist, uplink Port 5 uses a configurable interface selected for the attached host controller. This range lets the device work with controllers using parallel or reduced-pin clock-and-data interfaces, while the exact supported clock modes and timing limits are defined in the manufacturer datasheet.
Where can I download the KSZ8765CLXIC datasheet PDF?
The official KSZ8765CLXIC documentation starts at the Microchip Technology KSZ8765 product page, which links the device-specific data sheet and supporting documents. The manufacturer hardware design checklist is also directly available as a PDF. Use those documents for the authoritative pin assignments, electrical characteristics, register map, interface timing, and recommended application circuit rather than relying on a distributor summary or third-party copy.
Where can I find the KSZ8765CLXIC pinout?
The KSZ8765CLXIC pinout is documented in the manufacturer data sheet and must be used when assigning tracks on an 80-lead LQFP PCB. Use the complete pin-description table and package drawing to identify power, ground, management, media, clock, and host-interface signals. Request the current KSZ8765CLXIC documentation through the Request a Quote form on this page when a local copy of the manufacturer material is needed.
Is the KSZ8765CLXIC suitable for industrial Ethernet equipment?
The KSZ8765CLXIC is suitable for industrial Ethernet equipment when its electrical limits, temperature range, and isolation requirements satisfy the product specification. Its managed Layer 2 architecture, four 10/100 Mbps copper ports, two 100Base-FX fiber ports, and Gigabit uplink support factory automation, embedded gateways, and optical-to-copper bridges. Confirm the exact operating-temperature limits and industrial qualification requirements before releasing a production design.
What can replace the KSZ8765CLXIC?
The KSZ8765CLXIC should be replaced only by a device with the same 80-lead LQFP footprint, pin-to-pin signal compatibility, and equivalent port and media capabilities. No verified cross-brand drop-in replacement is identified for this part. The KSZ8795CLXCC and KSZ8721CL A2 appear in comparison listings, but their interface and package characteristics differ, so they should not be treated as direct replacements without a complete schematic, pinout, and firmware compatibility review.
Is there a verified drop-in alternative to the KSZ8765CLXIC?
No verified cross-brand drop-in alternative to the KSZ8765CLXIC is currently established. The manufacturer product page confirms the KSZ8765 family, while the cross-reference results do not demonstrate that another manufacturer's device is pin-compatible with all 80 leads. Because Ethernet switches can differ in management registers, clock requirements, PHY behavior, and board-level termination, a replacement must be validated using the manufacturer data sheets, pin maps, hardware design checklist, and an equivalence test.
What is the difference between the KSZ8765CLXIC and KSZ8795CLXCC?
The KSZ8765CLXIC and KSZ8795CLXCC belong to related five-port managed Ethernet-switch families, but they are not established as pin-compatible equivalents. The KSZ8765 provides four 10/100 Mbps copper ports, one Gigabit uplink, two 100Base-FX fiber ports, and GMII/RGMII/MII/RMII support according to Microchip documentation. The comparison results do not expose a complete pin-by-pin analysis of the KSZ8795CLXCC, so board substitution requires direct review of both data sheets.
What is the difference between the KSZ8765CLXIC and KSZ8721CL A2?
The KSZ8765CLXIC is a five-port managed switch with four 10/100 Mbps copper ports, a Gigabit uplink, and 100Base-FX fiber support. The KSZ8721CL A2 is associated with a smaller-port-count Ethernet-switch family, and the available comparison does not establish a shared footprint or equivalent signal mapping. Although a KSZ8721SLI-TR product page exists, the KSZ8721 family should not replace the KSZ8765CLXIC without confirming package dimensions, pin assignments, media support, and management software.
When should I choose the KSZ8765CLXIC instead of a smaller Ethernet switch?
Choose the KSZ8765CLXIC when the design needs five integrated switch ports, both copper and fiber media, a separate Gigabit uplink, and multiple supported host-interface formats. It is especially useful when system cost and PCB area favor integrating PHYs and switching logic rather than using an external switch with several discrete PHYs. Choose a smaller switch when only a few copper ports are required and the extra fiber, uplink, or management capacity would remain unused.
Is the KSZ8765CLXIC suitable for a fiber-to-copper Ethernet bridge?
The KSZ8765CLXIC is suitable for a fiber-to-copper Ethernet bridge because the hardware design checklist identifies two 100Base-FX fiber ports, two 10/100Base-T/TX copper ports, and a configurable uplink. This arrangement can bridge 100 Mbps optical links to copper-facing equipment while forwarding traffic through a separate host or uplink connection. Optical implementation still requires suitable fiber transceivers or integrated optical components, correct line coding, and validation of the complete electrical design.
How should the KSZ8765CLXIC be used with a microcontroller or FPGA?
The KSZ8765CLXIC can operate beside a microcontroller or FPGA through a supported MII, RMII, GMII, or RGMII uplink, depending on the host controller's capabilities. The selected interface must be configured consistently on both devices, including clock source, clock direction, data width, and timing. Use the manufacturer application information and interface timing specifications to assign the switch, controller, isolation devices, reference clocks, and decoupling network.
Where can I buy the KSZ8765CLXIC and what is its current price?
The KSZ8765CLXIC can be requested through the Request a Quote form on this page, where the current commercial terms, stock position, lead time, and minimum order quantity can be addressed. The current price is not reproduced in this answer because it changes with quantity, package suffix, market conditions, and supply status. Use the quote form rather than a static pricing statement so the order is matched to the exact KSZ8765CLXIC ordering code.
Is the KSZ8765CLXIC in stock and what is its lead time?
Stock and lead time for the KSZ8765CLXIC should be confirmed through the Request a Quote form on this page. A distributor search result indicates that the exact part was listed for immediate shipment when captured, but availability can change rapidly and does not guarantee allocation for production quantities. Provide the required quantity, target date, and packaging preference in the quote request to obtain a current delivery commitment.
What are the key specifications of the KSZ8765CLXIC that engineers should know?
The KSZ8765CLXIC integrates five managed Layer 2 Ethernet switch ports into an 80-lead, 10 mm by 10 mm LQFP package. Its established features include four 10/100 Mbps copper ports, a 10/100/1000 Mbps Gigabit uplink, two 100Base-FX fiber ports, and configurable GMII, RGMII, MII, and RMII interfaces. The manufacturer describes the device as a cost-sensitive integrated solution for equipment requiring copper, fiber, and flexible host-controller connectivity.

کے لیے انجینئرنگ ریفرنس ڈیٹا KSZ8765CLXIC — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the KSZ8765CLXIC when an embedded system needs a managed five-port Ethernet switch with four 10/100 Mbps copper connections, two 100Base-FX fiber connections, and a configurable 10/100/1000 Mbps uplink. It is particularly useful when a microcontroller, network processor, or FPGA can operate through MII, RMII, GMII, or RGMII and when integrating PHYs, switching logic, and management into one 80-lead LQFP reduces board area and component count. The KSZ8795CLXCC may be relevant as another Microchip managed switch, but the available material does not establish pin compatibility, so it should be treated as a design comparison rather than a drop-in replacement. The KSZ8721 family is better considered when fewer ports are required; KSZ8721SLI-TR and KSZ8721BA4TR also require package, media, and register-level review before substitution. No verified cross-brand drop-in equivalent is established, making an unchanged KSZ8765CLXIC footprint the lowest-risk choice when its documented interfaces satisfy the system requirements.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ KSZ8795CLXCC KSZ8721CL A2
Brand Microchip Technology Microchip Technology Microchip Technology
Product Type Layer 2-managed Ethernet switch Managed Ethernet switch Ethernet switch
Verified Pin-to-Pin Replacement Not applicable No No

اہم امتیازی خصوصیات

  • Combines copper, fiber, and a configurable host uplink in one managed switch (بمقابلہKSZ8721CL A2)
  • Supports four host-interface families through the uplink (بمقابلہKSZ8795CLXCC)
  • Five-port Layer 2-managed integration reduces external networking components (بمقابلہKSZ8721CL A2)

ڈیزائن نوٹس

Implement the board according to the Microchip KSZ8765CLX Hardware Design Checklist. Place the switch close to the copper magnetics and place the media-facing network components in the order required by the checklist. Keep the GMII, RGMII, MII, or RMII host signals away from analog and power-conversion areas, and provide the reference clock and decoupling network using the manufacturer's recommended topology. Because only one uplink interface mode is configured at a time, verify all pin assignments against the selected mode before releasing the PCB.

Separate the switch's digital supply routing from noisy analog or switching-converter paths, and use the manufacturer's recommended capacitor values and placement directly at the relevant pins. Confirm the supply tolerance, current limit, sequencing, and startup behavior against the datasheet before choosing regulators. Estimated: if the designer's worst-case regulator loss is calculated as voltage-drop difference multiplied by worst-case aggregate port current, the resulting dissipation must be added to the regulator's own loss and checked against its thermal rating.

Treat the selected host interface as a synchronous high-speed signal path. Use the manufacturer-specified reference-clock source and routing, maintain the recommended trace topology, and provide series damping where the timing or reference design calls for it. Check setup and hold margins in the selected GMII, RGMII, MII, or RMII mode. Although the copper ports are lower speed than the parallel host interface, mismatched clocking or incorrect termination can still prevent links from establishing reliably.

Do not assume that the KSZ8795CLXCC or KSZ8721CL A2 are drop-in replacements for the KSZ8765CLXIC merely because they are Ethernet switches. A valid substitution requires an identical footprint, complete pin-level compatibility, equivalent media interfaces, compatible clocking, and matching management behavior. Preserve the KSZ8765CLXIC schematic and PCB layout when moving between identical ordering configurations, and use the manufacturer pin description table for every NC, power, ground, and configuration connection.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The product and comparison snippets mention RoHS and REACH topics, but they do not provide a definitive compliance declaration for the exact ordering code. Automotive qualification, lead-free status, halogen-free status, and conflict-minerals status are therefore not assumed.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-14 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

KSZ8765CLXIC datasheet KSZ8765CLXIC pinout KSZ8765CLXIC datasheet pdf KSZ8765CLXIC equivalent KSZ8765CLXIC replacement KSZ8765CLXIC cross reference KSZ8765CLXIC footprint KSZ8765CLXIC price KSZ8765CLXIC stock Microchip KSZ8765CLXIC KSZ8765 5-port Ethernet switch KSZ8765CLXIC RGMII GMII interface KSZ8765CLXIC vs KSZ8795CLXCC KSZ8765CLXIC vs KSZ8721CL A2 KSZ8765CLXIC application circuit

متعلقہ اجزاء اور اصطلاحات

Microchip Technology KSZ8765CLXIC KSZ8765 KSZ8765CLX KSZ8765CLX-EVAL KSZ8795CLXCC KSZ8721CL A2 Ethernet switch Layer 2 managed switch network interface controller communications semiconductor 10/100Base-T/TX 100Base-FX Gigabit Ethernet GMII RGMII MII RMII 80-lead LQFP surface mount package embedded networking factory automation fiber-to-copper bridge hardware design checklist Ethernet switch management
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں