KSZ8765CLXIC - 5-Port Managed Ethernet Switch | Microchip
MPN: KSZ8765CLXIC ✓ فعالKSZ8765CLXIC نمای کلی
An Ethernet switch is a Layer 2 network-semiconductor device that receives Ethernet frames on one port, examines their destination addresses, and forwards traffic to the appropriate port or ports. A managed switch adds configurable status, control, and monitoring functions to this basic forwarding role. The KSZ8765 belongs to the broader hierarchy of Ethernet switch, network interface controller, communications semiconductor, and integrated circuit.
Key features include five integrated switch ports, Layer 2 management, 10/100 Mbps copper networking, a Gigabit uplink, and support for both fiber and copper media. Its configurable GMII, RGMII, MII, and RMII interfaces allow it to connect with microcontrollers, network processors, FPGAs, and other Ethernet-capable system controllers. The hardware design checklist identifies Ports 1 and 2 as 100Base-FX fiber ports, Ports 3 and 4 as 10/100Base-T/TX copper ports, and Port 5 as a configurable uplink supporting GMII, RGMII, MII, or RMII.
The KSZ8765CLXIC is designed to reduce the component count of embedded Ethernet equipment by combining multiple physical-layer interfaces, switching logic, and management functions in one package. This integration can simplify board partitioning while preserving separate copper and fiber connectivity. Its architecture is particularly useful when an equipment maker needs a managed industrial network interface without implementing five discrete Ethernet PHYs and an external switch controller.
Typical uses include industrial Ethernet equipment, factory automation controllers, embedded gateways, telecom access hardware, network appliances, and optical-to-copper network bridges. The device can support equipment that bridges legacy 10/100 Mbps copper links to a faster Gigabit uplink while retaining access to optical ports for longer-distance or electrically isolated links.
Designers should follow the Microchip KSZ8765CLX Hardware Design Checklist when assigning the clock, management interface, media-dependent interfaces, power rails, and reset or configuration signals. The complete electrical limits, recommended operating conditions, transceiver details, internal register functions, and signal timing must be taken from the manufacturer datasheet rather than inferred from the product summary.
This page combines the manufacturer product description, package and interface facts, pricing-page information, and hardware-design guidance into an application-focused guide. It also distinguishes directly documented characteristics from electrical parameters that require confirmation from the complete KSZ8765 datasheet.
جایگزینهای drop-in برای KSZ8765CLXIC — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
هیچ جایگزین مستقیمی برای این محصول موجود نیست.
درخواست جایگزینKSZ8765CLXIC حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | Layer 2-managed Ethernet switch |
| Total Switch Ports | 5 ports |
| Copper Port Speed | 10/100 Mbps |
| Copper Port Count | 4 ports |
| Gigabit Uplink Port | 1 port at 10/100/1000 Mbps |
| Fiber Port Speed | 100 Mbps 100Base-FX |
| Fiber Port Count | 2 ports |
| Host Interface Support | GMII, RGMII, MII, and RMII |
| Network Layer | Layer 2 |
| Management Capability | Managed switching |
| Package Type | 80-lead LQFP |
| Package Dimensions | 10 mm x 10 mm |
| نوع نصب | Surface mount |
راهنمای پیکربندی پین KSZ8765CLXIC 10 mm x 10 mm
پیکربندی پین برای KSZ8765CLXIC (پکیج 10 mm x 10 mm). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای KSZ8765CLXIC.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
KSZ8765CLXIC مناسب است برای 6 کاربردs: Industrial Ethernet Gateway, Fiber-to-Copper Network Bridge, Factory Automation Controller, Embedded Network Processor Platform, Telecom Access Equipment, FPGA-Based Network Appliance.
Industrial Ethernet Gateway
The KSZ8765CLXIC fits an industrial gateway that must combine legacy 10/100 Mbps equipment with a faster network uplink. Four 10/100 Mbps copper ports support devices such as programmable controllers, sensors, and service equipment, while the 10/100/1000 Mbps uplink carries aggregate traffic toward a plant network or controller. Its managed Layer 2 operation provides a more structured platform than a collection of isolated PHYs. The copper transceiver magnetics, surge protection, power rails, and host-interface timing must be implemented according to the Microchip hardware design checklist, especially where the gateway must withstand industrial electrical transients.
پیشنهادی
Fiber-to-Copper Network Bridge
The KSZ8765CLXIC is well suited to bridging 100 Mbps fiber links with 10/100 Mbps copper endpoints. The hardware design checklist assigns Ports 1 and 2 to 100Base-FX, Ports 3 and 4 to 10/100Base-T/TX, and Port 5 to the configurable uplink, allowing optical and copper traffic to coexist within one switch. This arrangement supports industrial cabinets, remote terminals, and telecom access equipment where copper reach is limited or where optical links provide galvanic separation. Fiber magnetics or transceivers, loss-of-signal handling, line coding, and the uplink interface still require full circuit validation.
پیشنهادی
Factory Automation Controller
A factory automation controller can use the KSZ8765CLXIC to connect local equipment without requiring several standalone Ethernet controllers. Four 10/100 Mbps copper ports can serve programmable logic, remote I/O, vision equipment, or service interfaces, while the Gigabit uplink provides a faster path to a supervisory network. Managed Layer 2 features make the switch more appropriate than a basic unmanaged device for controlled networks requiring status monitoring and configuration. The design must account for the controller's supported MII, RMII, GMII, or RGMII mode and should follow the manufacturer checklist for clocking, decoupling, media interfaces, and board layout.
پیشنهادی
Embedded Network Processor Platform
The KSZ8765CLXIC can provide the physical-layer switching front end for an embedded network processor or FPGA-based communications platform. A processor with RGMII or GMII can use the configurable uplink for high-throughput traffic, while four copper ports support external endpoints and two fiber ports support backhaul or industrial links. Integrating the switch into the host design reduces the number of external PHYs required. The host interface must be configured for the correct clock mode and timing, and copper magnetics, termination, isolation, and supply sequencing must follow the Microchip hardware design guidance to avoid link instability.
پیشنهادی
Telecom Access Equipment
The KSZ8765CLXIC can support telecom access equipment that needs several local 10/100 Mbps service ports, fiber uplinks, and a configurable host connection. The five-port managed-switch architecture allows service cards or embedded modules to share a common switching fabric without using a discrete controller and multiple PHY devices. The Gigabit uplink is useful for backbone aggregation, while 100Base-FX options support fiber-based access links. In a telecom-grade enclosure, designers must verify temperature limits, power integrity, electromagnetic compatibility, and connector isolation directly from the electrical specifications rather than assuming compliance from the product family name.
پیشنهادی
FPGA-Based Network Appliance
The KSZ8765CLXIC suits FPGA-based appliances in which several physical network interfaces must connect to programmable logic. Four copper ports can expose service, management, or downstream links; two 100Base-FX ports support optical connectivity; and Port 5 can expose RGMII, GMII, MII, or RMII to the FPGA. The configurable uplink lets one switch family address different host-controller designs. Because FPGA I/O timing, clocking, and management firmware must match the selected interface mode, engineers should use the manufacturer's timing tables and reference implementation rather than treating all interface options as simultaneously available.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای KSZ8765CLXIC — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | KSZ8795CLXCC | KSZ8721CL A2 |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Product Type | Layer 2-managed Ethernet switch | Managed Ethernet switch | Ethernet switch |
| Verified Pin-to-Pin Replacement | Not applicable | No | No |
تفاوتهای کلیدی
- Combines copper, fiber, and a configurable host uplink in one managed switch (در مقابلKSZ8721CL A2)
- Supports four host-interface families through the uplink (در مقابلKSZ8795CLXCC)
- Five-port Layer 2-managed integration reduces external networking components (در مقابلKSZ8721CL A2)
یادداشتهای طراحی
Implement the board according to the Microchip KSZ8765CLX Hardware Design Checklist. Place the switch close to the copper magnetics and place the media-facing network components in the order required by the checklist. Keep the GMII, RGMII, MII, or RMII host signals away from analog and power-conversion areas, and provide the reference clock and decoupling network using the manufacturer's recommended topology. Because only one uplink interface mode is configured at a time, verify all pin assignments against the selected mode before releasing the PCB.
Separate the switch's digital supply routing from noisy analog or switching-converter paths, and use the manufacturer's recommended capacitor values and placement directly at the relevant pins. Confirm the supply tolerance, current limit, sequencing, and startup behavior against the datasheet before choosing regulators. Estimated: if the designer's worst-case regulator loss is calculated as voltage-drop difference multiplied by worst-case aggregate port current, the resulting dissipation must be added to the regulator's own loss and checked against its thermal rating.
Treat the selected host interface as a synchronous high-speed signal path. Use the manufacturer-specified reference-clock source and routing, maintain the recommended trace topology, and provide series damping where the timing or reference design calls for it. Check setup and hold margins in the selected GMII, RGMII, MII, or RMII mode. Although the copper ports are lower speed than the parallel host interface, mismatched clocking or incorrect termination can still prevent links from establishing reliably.
Do not assume that the KSZ8795CLXCC or KSZ8721CL A2 are drop-in replacements for the KSZ8765CLXIC merely because they are Ethernet switches. A valid substitution requires an identical footprint, complete pin-level compatibility, equivalent media interfaces, compatible clocking, and matching management behavior. Preserve the KSZ8765CLXIC schematic and PCB layout when moving between identical ordering configurations, and use the manufacturer pin description table for every NC, power, ground, and configuration connection.
اطلاعات انطباق
The product and comparison snippets mention RoHS and REACH topics, but they do not provide a definitive compliance declaration for the exact ordering code. Automotive qualification, lead-free status, halogen-free status, and conflict-minerals status are therefore not assumed.