KSZ8842-32MVLI - 2-Port 10/100 Ethernet Switch | Microchip
MPN: KSZ8842-32MVLI ✗ اختتامِ زندگیKSZ8842-32MVLI جائزہ
An Ethernet switch is a network-interface IC that forwards frames between multiple physical Ethernet ports while presenting one logical connection to a host processor. The KSZ8842 belongs to the KSZ8842 family of two-port switches, which includes PCI and non-PCI CPU-interface implementations. This non-PCI variant uses a generic parallel bus architecture, placing it in the interface-IC and embedded-Ethernet hierarchy rather than the standalone transceiver category.
The principal features are two integrated 10/100 Ethernet ports, a generic 32-bit host interface, operation from 3.1 V to 3.5 V, and a 128-LQFP industrial package. The 32-bit bus provides a broad data path for transferring packet data between the Ethernet MACs and an embedded CPU. The 14 x 14 x 1.4 mm gull-wing package also supports surface-mount assembly, although its 128 leads require careful fanout, ground-plane, and signal-integrity layout.
The KSZ8842 architecture separates network-port handling from host connectivity: integrated Ethernet PHY and MAC functions communicate with the external processor through the parallel bus. This approach can reduce the number of discrete network components in an embedded appliance. Exact propagation delay, throughput, media-access-control behavior, and electrical timing values must be confirmed against the manufacturer datasheet before defining a system-level Ethernet timing budget.
Typical uses include industrial control panels, embedded routers, print servers, set-top boxes, building-control gateways, and networked test equipment. A compact appliance can connect one port to an upstream LAN and use the second port for a local device or downstream segment. In these systems, the non-PCI interface gives the CPU direct access to packet buffers and status registers while the integrated PHYs handle physical-layer signaling.
PCB implementation requires careful treatment of the parallel host bus and both Ethernet channels. Place decoupling capacitors at the supply pins, maintain the specified impedance and routing geometry for differential pairs, and use a continuous ground reference beneath the device. Confirm pin assignments, exposed or connected ground leads, LED interfaces, crystal requirements, and reset behavior directly from the manufacturer datasheet before fabrication.
This product page combines package and interface details, family alternatives, comparison criteria, and implementation guidance to support component selection and PCB planning. It also distinguishes a true same-footprint replacement from related devices that use different bus widths or package formats.
کے لیے ڈراپ اِن متبادل KSZ8842-32MVLI — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں KSZ8842-32MVLI (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package Dimensions.
KSZ8842-32MVL
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
KSZ8842-16MBLI
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →KSZ8842-16MVLI
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →KSZ8842-32MVLI زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Ethernet Port Count | 2 ports |
| Supported Ethernet Speeds | 10 Mbps and 100 Mbps |
| Host Interface Width | 32 bit |
| Host Interface Type | Generic parallel bus |
| CPU Interface Class | Non-PCI |
| Supply Voltage Range | 3.1 V to 3.5 V |
| Package Type | 128-LQFP |
| Package Dimensions | 14 x 14 x 1.4 mm |
| Lead Pitch | 0.4 mm |
| Total Lead Count | 128 leads |
| Terminal Form | Gull wing |
| Package Shape | Square |
| Temperature Grade | Industrial |
| ماؤنٹنگ ٹائپ | Surface mount |
| Ethernet Standard | 10/100 Base-T |
| RoHS Compliance | Compliant |
| Halogen-Free Status | Compliant |
| Maximum Data Rate | 100 Mbps per port |
| Ethernet Controller | Integrated 10/100 Ethernet switch |
KSZ8842-32MVLI square پن کنفیگریشن گائیڈ
KSZ8842-32MVLI (square پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں KSZ8842-32MVLI.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
KSZ8842-32MVLI کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Ethernet Gateway, Embedded Network Appliance, Building-Control Gateway, Print Server, Networked Test Instrument, Connected Control Panel.
Industrial Ethernet Gateway
The KSZ8842-32MVLI fits an industrial gateway requiring two 10/100 Ethernet ports and a direct parallel connection to an embedded processor. Its 32-bit generic host bus provides a wide packet-data path, while the non-PCI interface avoids requiring a PCI controller in the host design. The 3.1 V to 3.5 V supply range fits a regulated 3.3 V system, and the 128-LQFP package supports automated surface-mount assembly. In a typical design, one port connects to an upstream control network and the other supports a local machine or service interface. Differential Ethernet routing and uninterrupted ground references remain essential because two high-speed physical channels and a wide parallel bus share the same board area.
تجویز کردہ
Embedded Network Appliance
The KSZ8842-32MVLI is suitable for an embedded network appliance that bridges a local 10/100 Ethernet segment to a host processor. Two integrated 10/100 ports allow an upstream network connection and one downstream endpoint without separate PHY devices. The generic 32-bit parallel interface can support high packet-transfer throughput when the host processor and driver are designed for that bus width. Operating from 3.1 V to 3.5 V, the switch aligns with common 3.3 V embedded rails. Designers should separate the Ethernet differential pairs from the parallel host signals, use short return paths for high-speed bus routing, and confirm reset and interrupt behavior in the manufacturer pin table.
تجویز کردہ
Building-Control Gateway
The KSZ8842-32MVLI can support a building-control gateway that connects supervisory equipment to field networks and local controllers. Its industrial temperature classification, two-port 10/100 capability, and 3.3 V-class operating range align with embedded building infrastructure. The generic 32-bit bus allows the processor to manage Ethernet traffic directly, while the switch provides frame forwarding between the network-facing and device-facing ports. Layout the 128-LQFP device with an uninterrupted ground plane and controlled differential-pair geometry for both ports. Use the manufacturer datasheet to assign all 128 leads, identify required termination, and determine the clock, reset, LED, and power-supply connections before releasing the board.
تجویز کردہ
Print Server
The KSZ8842-32MVLI is appropriate for a print-server design requiring both an upstream network connection and a connection to a local printer interface. The two 10/100 ports provide the basic Ethernet connectivity, and the 32-bit parallel CPU interface supports efficient transfer of print data through the switch registers. The switch is designed for a non-PCI host environment, making it useful in cost-conscious embedded systems based on microcontrollers or application processors with a dedicated parallel bus. Because the 128-LQFP footprint has 0.4 mm lead pitch, use careful fanout, stable reference planes, and tested Ethernet differential routing. Verify protocol support and driver operation in the final firmware before production.
تجویز کردہ
Networked Test Instrument
The KSZ8842-32MVLI can be integrated into a networked test instrument or measurement controller that must expose an Ethernet service port while retaining another port for a local host or service connection. Its generic 32-bit bus provides a direct data-transfer interface to the instrument processor, and the two-port 10/100 configuration supports management traffic without an additional external Ethernet switch. The 3.1 V to 3.5 V operating range fits a 3.3 V system, subject to power-quality requirements. Preserve the Ethernet differential-pair geometry and isolate high-current switching nodes from the switch area. Check the complete timing, reset, and interrupt requirements in the manufacturer datasheet during hardware bring-up.
تجویز کردہ
Connected Control Panel
The KSZ8842-32MVLI is suitable for a connected control panel requiring Ethernet connectivity and a high-bandwidth path to its local processor. One 10/100 port can connect to the supervisory network while the second supports an equipment-level link or service interface. The generic 32-bit non-PCI bus is appropriate when the host has a dedicated parallel interface and needs direct access to switch status and packet data. Its industrial classification supports industrial equipment environments, while the 14 x 14 mm 128-LQFP package fits compact industrial controllers. Maintain a continuous ground reference, route both Ethernet channels as controlled differential pairs, and follow the manufacturer’s decoupling and external-component requirements to minimize emissions and susceptibility to industrial noise.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا KSZ8842-32MVLI — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | KSZ8842-32MVL | KSZ8842-16MBLI | KSZ8842-16MVLI |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 128-LQFP (14 x 14 mm) | 128-LQFP (14 x 14 mm) | 128-LQFP (14 x 14 mm) | 128-LQFP (14 x 14 mm) |
| Ethernet Port Count | 2 ports | 2 ports | 2 ports | 2 ports |
| Supported Ethernet Speeds | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps |
| Host Interface Width | 32 bit | 32 bit | 16 bit, 50% narrower | 16 bit, 50% narrower |
| CPU Interface Class | Generic parallel non-PCI interface | Generic parallel non-PCI interface | Non-PCI interface | Non-PCI interface |
| Lead Pitch | 0.4 mm | 0.4 mm | 0.4 mm | 0.4 mm |
اہم امتیازی خصوصیات
- Wider host data path than the 16-bit KSZ8842 alternatives (بمقابلہKSZ8842-16MVLI)
- Industrial-grade ordering configuration (بمقابلہKSZ8842-32MVL)
- Compact 14 x 14 mm footprint with two integrated Ethernet ports (بمقابلہKSZ8842-32MQL)
ڈیزائن نوٹس
Route both Ethernet ports as controlled-impedance differential pairs and maintain a continuous ground reference beneath and between the pairs. The KSZ8842-32MVLI combines two 10/100 channels with a 32-bit parallel host bus in a dense 128-LQFP package. Separate the Ethernet routing from noisy switching nodes, avoid stubs, and follow the manufacturer reference layout for component placement and via transitions.
Treat the generic 32-bit host bus as a simultaneous-switching interface when planning return-current paths. Use a solid reference plane, minimize layer transitions, and place termination or damping components only where required by the host-bus timing design. Validate setup and hold timing at the processor and switch rather than relying solely on nominal bus width, because package and routing parasitics can affect a wide parallel interface.
Design the 3.1 V to 3.5 V supply rail so it remains within the device limits at the IC pins under Ethernet traffic and processor activity. Place decoupling capacitors close to the appropriate power and ground leads using the manufacturer reference circuit. Confirm which LQFP leads are power or ground rather than inferring them from package position, and use separate filtering for noisy external loads to prevent conducted disturbances from reaching the Ethernet and host interface sections.
Do not substitute KSZ8842-32MQL for KSZ8842-32MVLI without redesigning the footprint: KSZ8842-32MQL uses a 128-PQFP measuring 14 x 20 mm, whereas the target uses a 14 x 14 mm 128-LQFP. Likewise, a 16-bit KSZ8842 alternative can require additional transfer cycles and driver changes. Verify package drawings, bus width, temperature grade, and ordering information together before approving a substitution.
تعمیل کی معلومات
RoHS compliance and halogen-free status are identified for KSZ8842-32MVLI. The component is an industrial-grade Ethernet interface IC, not an automotive AEC-Q100-qualified device.