Microchip Technology

KSZ8842-32MVLI - 2-Port 10/100 Ethernet Switch | Microchip

MPN: KSZ8842-32MVLI ✗ End of Life
3.1 V to 3.5 V Vdss 128-LQFP Package 10 Mbps and 100 Mbps Speed
MOQ: 1 |

KSZ8842-32MVLI Overview

The Microchip KSZ8842-32MVLI is a two-port 10/100 Base-T Ethernet switch with a generic 32-bit parallel CPU interface, supplied in a 128-lead LQFP package measuring 14 x 14 mm. It supports 10 Mbps and 100 Mbps Ethernet operation, industrial-grade temperature classification, and a 3.1 V to 3.5 V operating range. The device is intended for embedded systems that require two integrated Fast Ethernet ports and direct host-bus connectivity without using a separate Ethernet controller.

An Ethernet switch is a network-interface IC that forwards frames between multiple physical Ethernet ports while presenting one logical connection to a host processor. The KSZ8842 belongs to the KSZ8842 family of two-port switches, which includes PCI and non-PCI CPU-interface implementations. This non-PCI variant uses a generic parallel bus architecture, placing it in the interface-IC and embedded-Ethernet hierarchy rather than the standalone transceiver category.

The principal features are two integrated 10/100 Ethernet ports, a generic 32-bit host interface, operation from 3.1 V to 3.5 V, and a 128-LQFP industrial package. The 32-bit bus provides a broad data path for transferring packet data between the Ethernet MACs and an embedded CPU. The 14 x 14 x 1.4 mm gull-wing package also supports surface-mount assembly, although its 128 leads require careful fanout, ground-plane, and signal-integrity layout.

The KSZ8842 architecture separates network-port handling from host connectivity: integrated Ethernet PHY and MAC functions communicate with the external processor through the parallel bus. This approach can reduce the number of discrete network components in an embedded appliance. Exact propagation delay, throughput, media-access-control behavior, and electrical timing values must be confirmed against the manufacturer datasheet before defining a system-level Ethernet timing budget.

Typical uses include industrial control panels, embedded routers, print servers, set-top boxes, building-control gateways, and networked test equipment. A compact appliance can connect one port to an upstream LAN and use the second port for a local device or downstream segment. In these systems, the non-PCI interface gives the CPU direct access to packet buffers and status registers while the integrated PHYs handle physical-layer signaling.

PCB implementation requires careful treatment of the parallel host bus and both Ethernet channels. Place decoupling capacitors at the supply pins, maintain the specified impedance and routing geometry for differential pairs, and use a continuous ground reference beneath the device. Confirm pin assignments, exposed or connected ground leads, LED interfaces, crystal requirements, and reset behavior directly from the manufacturer datasheet before fabrication.

This product page combines package and interface details, family alternatives, comparison criteria, and implementation guidance to support component selection and PCB planning. It also distinguishes a true same-footprint replacement from related devices that use different bus widths or package formats.

Drop-in alternatives for KSZ8842-32MVLI — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with KSZ8842-32MVLI (same form factor and footprint) — differing in Package Dimensions.

Microchip Technology
Package Dimensions: 14 x 14 mm
Compare with KSZ8842-32MVLI →

KSZ8842-32MVL

✅ Drop-In
📦 128-LQFP (14 x 14 mm)
Same 32-bit non-PCI switch architecture and 128-LQFP format; the LI suffix is absent, so confirm the temperature-grade ordering code before production substitution.

📋 Reference alternative (not in catalog)

KSZ8842-16MBLI

✅ Drop-In
Microchip Technology
📦 128-LQFP (14 x 14 mm)
2 ports · 10/100 Mb/s per port · 10/100 Base-T/TX PHY · 8-bit or 16-bit parallel · Non-PCI CPU interface · 2-port Ethernet switch with integrated 10/100 PHY · 100-LFBGA · 100 pins

Contact for price

View Datasheet →

KSZ8842-16MVLI

✅ Drop-In
Microchip Technology
📦 128-LQFP (14 x 14 mm)
2-Port 10/100 Ethernet Switch with Parallel CPU Interface · 2 ports · 10/100 Mb/s per port · IEEE 802.3, IEEE 802.3u, IEEE 802.3x · Generic 8/16-bit parallel bus · Non-PCI parallel CPU interface · Supported · Supported

Contact for price

View Datasheet →

KSZ8842-32MVLI Maximum Ratings & Electrical Characteristics

Ethernet Port Count 2 ports
Supported Ethernet Speeds 10 Mbps and 100 Mbps
Host Interface Width 32 bit
Host Interface Type Generic parallel bus
CPU Interface Class Non-PCI
Supply Voltage Range 3.1 V to 3.5 V
Package Type 128-LQFP
Package Dimensions 14 x 14 x 1.4 mm
Lead Pitch 0.4 mm
Total Lead Count 128 leads
Terminal Form Gull wing
Package Shape Square
Temperature Grade Industrial
Mounting Type Surface mount
Ethernet Standard 10/100 Base-T
RoHS Compliance Compliant
Halogen-Free Status Compliant
Maximum Data Rate 100 Mbps per port
Ethernet Controller Integrated 10/100 Ethernet switch

KSZ8842-32MVLI square Pin Configuration Guide

Pin configuration for KSZ8842-32MVLI (square package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

square package pinout diagram for KSZ8842-32MVLI

No detailed pinout data available for KSZ8842-32MVLI.

Refer to the datasheet for full pin configuration.

Typical Applications

KSZ8842-32MVLI is suitable for 6 applications: Industrial Ethernet Gateway, Embedded Network Appliance, Building-Control Gateway, Print Server, Networked Test Instrument, Connected Control Panel.

🏭

Industrial Ethernet Gateway

The KSZ8842-32MVLI fits an industrial gateway requiring two 10/100 Ethernet ports and a direct parallel connection to an embedded processor. Its 32-bit generic host bus provides a wide packet-data path, while the non-PCI interface avoids requiring a PCI controller in the host design. The 3.1 V to 3.5 V supply range fits a regulated 3.3 V system, and the 128-LQFP package supports automated surface-mount assembly. In a typical design, one port connects to an upstream control network and the other supports a local machine or service interface. Differential Ethernet routing and uninterrupted ground references remain essential because two high-speed physical channels and a wide parallel bus share the same board area.

🌐

Embedded Network Appliance

The KSZ8842-32MVLI is suitable for an embedded network appliance that bridges a local 10/100 Ethernet segment to a host processor. Two integrated 10/100 ports allow an upstream network connection and one downstream endpoint without separate PHY devices. The generic 32-bit parallel interface can support high packet-transfer throughput when the host processor and driver are designed for that bus width. Operating from 3.1 V to 3.5 V, the switch aligns with common 3.3 V embedded rails. Designers should separate the Ethernet differential pairs from the parallel host signals, use short return paths for high-speed bus routing, and confirm reset and interrupt behavior in the manufacturer pin table.

🏭

Building-Control Gateway

The KSZ8842-32MVLI can support a building-control gateway that connects supervisory equipment to field networks and local controllers. Its industrial temperature classification, two-port 10/100 capability, and 3.3 V-class operating range align with embedded building infrastructure. The generic 32-bit bus allows the processor to manage Ethernet traffic directly, while the switch provides frame forwarding between the network-facing and device-facing ports. Layout the 128-LQFP device with an uninterrupted ground plane and controlled differential-pair geometry for both ports. Use the manufacturer datasheet to assign all 128 leads, identify required termination, and determine the clock, reset, LED, and power-supply connections before releasing the board.

🖥️

Print Server

The KSZ8842-32MVLI is appropriate for a print-server design requiring both an upstream network connection and a connection to a local printer interface. The two 10/100 ports provide the basic Ethernet connectivity, and the 32-bit parallel CPU interface supports efficient transfer of print data through the switch registers. The switch is designed for a non-PCI host environment, making it useful in cost-conscious embedded systems based on microcontrollers or application processors with a dedicated parallel bus. Because the 128-LQFP footprint has 0.4 mm lead pitch, use careful fanout, stable reference planes, and tested Ethernet differential routing. Verify protocol support and driver operation in the final firmware before production.

🔧

Networked Test Instrument

The KSZ8842-32MVLI can be integrated into a networked test instrument or measurement controller that must expose an Ethernet service port while retaining another port for a local host or service connection. Its generic 32-bit bus provides a direct data-transfer interface to the instrument processor, and the two-port 10/100 configuration supports management traffic without an additional external Ethernet switch. The 3.1 V to 3.5 V operating range fits a 3.3 V system, subject to power-quality requirements. Preserve the Ethernet differential-pair geometry and isolate high-current switching nodes from the switch area. Check the complete timing, reset, and interrupt requirements in the manufacturer datasheet during hardware bring-up.

🖥️

Connected Control Panel

The KSZ8842-32MVLI is suitable for a connected control panel requiring Ethernet connectivity and a high-bandwidth path to its local processor. One 10/100 port can connect to the supervisory network while the second supports an equipment-level link or service interface. The generic 32-bit non-PCI bus is appropriate when the host has a dedicated parallel interface and needs direct access to switch status and packet data. Its industrial classification supports industrial equipment environments, while the 14 x 14 mm 128-LQFP package fits compact industrial controllers. Maintain a continuous ground reference, route both Ethernet channels as controlled differential pairs, and follow the manufacturer’s decoupling and external-component requirements to minimize emissions and susceptibility to industrial noise.

Recommended Products Summary

KSZ8842-32MVL Same-family 32-bit non-PCI Ethernet switch Used in: Industrial Ethernet Gateway, Embedded Network Appliance, Building-Control Gateway, Print Server, Networked Test Instrument KSZ8842-16MVLI Microchip Technology Used in: Industrial Ethernet Gateway, Building-Control Gateway, Networked Test Instrument, Connected Control Panel KSZ8842-16MBLI Microchip Technology Used in: Embedded Network Appliance, Print Server, Connected Control Panel
What is the KSZ8842-32MVLI?
The KSZ8842-32MVLI is a two-port 10/100 Ethernet switch with a generic 32-bit parallel CPU interface. According to the Microchip KSZ8842 datasheet, it supports 10 Mbps and 100 Mbps Base-T operation, uses a non-PCI host interface, operates from 3.1 V to 3.5 V, and is packaged in a 128-LQFP measuring 14 x 14 x 1.4 mm. It is intended for embedded products requiring two Ethernet ports and direct processor-bus access.
How many Ethernet ports does KSZ8842-32MVLI support?
The KSZ8842-32MVLI supports two independent 10/100 Ethernet ports. According to the Microchip KSZ8842 datasheet, each port operates at 10 Mbps or 100 Mbps using 10/100 Base-T signaling. A common use is one port for an upstream network connection and one for a local embedded device or downstream segment. The integrated switch and parallel host interface reduce the need for separate Ethernet controller and transceiver circuitry in the host system.
What is the host interface on the KSZ8842-32MVLI?
The KSZ8842-32MVLI uses a generic 32-bit parallel CPU interface and is identified as a non-PCI Ethernet switch. According to the Microchip KSZ8842 datasheet, the KSZ8842 family includes PCI and non-PCI implementations, with 8-bit, 16-bit, and 32-bit bus designs available across the family. The 32-bit target MPN is therefore intended for processors able to connect to the switch through its dedicated parallel interface rather than a PCI bus.
What package does the KSZ8842-32MVLI use?
The KSZ8842-32MVLI uses a 128-lead LQFP package measuring 14 x 14 x 1.4 mm with 0.4 mm lead pitch. The manufacturer listing identifies a square, gull-wing, surface-mount package. Because the device has 128 terminals and its exact 128-lead package drawing is not represented in the available package library, use the manufacturer datasheet for the complete pin-description and land-pattern information before laying out the PCB.
What is the operating voltage of KSZ8842-32MVLI?
The KSZ8842-32MVLI operates from 3.1 V to 3.5 V. According to the manufacturer product information, this voltage range applies to the integrated two-port 10/100 Ethernet switch with its generic 32-bit bus interface. The range provides 0.4 V of nominal span, so the power architecture should account for tolerance, transient response, and the voltage requirements of every connected bus and Ethernet interface.
Where can I download the KSZ8842-32MVLI datasheet PDF?
The manufacturer-hosted datasheet PDF is available at https://www.microchip.com/content/dam/mchp/documents/OTH/ProductDocuments/DataSheets/KS8842M.pdf. It describes the KSZ8842M family of two-port Ethernet switches with non-PCI CPU interfaces, including 8-bit, 16-bit, and 32-bit bus versions. Use the ordering information and package drawings to confirm that the document covers the 128-LQFP KSZ8842-32MVLI configuration.
Where can I find the KSZ8842-32MVLI pinout?
The KSZ8842-32MVLI pinout is defined by the pin-description and package-drawing sections of the Microchip KSZ8842M datasheet. The device uses 128 LQFP leads at 0.4 mm pitch, including power, ground, host-bus, Ethernet, control, and status connections. Assign every PCB land from that table and verify the exposed-ground or thermal-pad arrangement for the selected package before releasing Gerber files.
What is the best drop-in replacement for KSZ8842-32MVLI?
KSZ8842-32MVL is the closest same-family drop-in candidate identified for KSZ8842-32MVLI because it preserves the KSZ8842 32-bit non-PCI switch architecture and 128-LQFP format while removing the industrial-temperature suffix. KSZ8842-16MBLI and KSZ8842-16MVLI are related 16-bit alternatives, but their reduced host-bus width can create software and timing differences. Verify ordering information and pin-level compatibility before substitution.
Can KSZ8842-16MBLI replace KSZ8842-32MVLI?
KSZ8842-16MBLI can serve as a related replacement only after checking the bus-width and timing effects. It is a KSZ8842-family, 16-bit non-PCI Ethernet switch rather than a 32-bit device, so its parallel host path is narrower than the KSZ8842-32MVLI. Pin compatibility alone is not enough: the processor interface, register access, packet-transfer bandwidth, and software driver must all be reviewed before substituting the part.
When should I choose KSZ8842-32MVLI over a 16-bit KSZ8842 alternative?
Choose KSZ8842-32MVLI when the host interface benefits from the full 32-bit parallel data path or when a production design is standardized around the industrial-grade 128-LQFP variant. A 16-bit KSZ8842 alternative reduces host-bus width by 16 bits, or 50% relative to the target interface, and may require additional transfer cycles. Select the narrower device only when bandwidth, software support, and lifecycle requirements are acceptable.
Is KSZ8842-32MVLI suitable for an industrial embedded controller?
The KSZ8842-32MVLI is classified as an industrial-temperature device and combines two 10/100 Ethernet ports with a generic 32-bit host interface. These characteristics suit embedded controllers, industrial gateways, and networked equipment requiring a direct processor connection. Confirm the complete electrical and environmental limits in the manufacturer datasheet, including operating temperature, Ethernet timing, supply tolerance, and absolute maximum ratings.
Where can I buy KSZ8842-32MVLI online?
Use the Request a Quote form on this page to request KSZ8842-32MVLI availability, current lead time, and a quotation. The form allows buyers to specify package, quantity, and delivery requirements without relying on a static listing that may become outdated. For technical confirmation, include the 128-LQFP package and industrial-grade ordering information in the request.
What is the price of KSZ8842-32MVLI?
Current commercial pricing for KSZ8842-32MVLI is obtained through the Request a Quote form on this page. The form supports quantity and logistics inquiries and returns a quotation appropriate to the requested order. Buyers should also provide the target delivery date because availability for legacy Ethernet-switch inventory can vary with order volume and market conditions.
What is the lead time and stock status for KSZ8842-32MVLI?
Request the current lead time and stock allocation for KSZ8842-32MVLI through the Request a Quote form on this page. Include the required quantity, production date, and shipment destination so the commercial response reflects the actual schedule. Until that confirmation is returned, treat the component as an order-on-request item rather than assuming immediate availability.
What are the key specifications engineers should know about KSZ8842-32MVLI?
The key KSZ8842-32MVLI specifications are two 10/100 Base-T ports, a generic 32-bit non-PCI host interface, a 3.1 V to 3.5 V supply range, and a 128-LQFP package measuring 14 x 14 x 1.4 mm. According to the Microchip KSZ8842M datasheet, the device is designed for embedded systems requiring integrated two-port Ethernet connectivity. Its 0.4 mm package pitch also makes high-density fanout and careful ground-plane design important.

Engineering reference data for KSZ8842-32MVLI — comparison, design guidance, and compliance information.

Selection Guide

Choose KSZ8842-32MVLI when the design needs two integrated 10/100 Ethernet ports, a generic 32-bit non-PCI host interface, and an industrial-grade 128-LQFP implementation. Its 32-bit bus is preferable to KSZ8842-16MBLI or KSZ8842-16MVLI when the host needs a wider transfer path or when redesigning a 16-bit design would add transfer cycles. Consider KSZ8842-32MVL when its ordering information confirms the required commercial and temperature conditions, since it retains the 32-bit architecture and package format. Do not treat KSZ8842-32MQL as a footprint-compatible substitute because it uses a 14 x 20 mm PQFP rather than the target's 14 x 14 mm LQFP. Before approving any replacement, review the manufacturer pin table, bus timing, interrupt behavior, external-component requirements, and firmware support. For new industrial designs, also confirm current lifecycle and obtain an availability commitment.

Comparison with Alternatives

Parameter This Product KSZ8842-32MVL KSZ8842-16MBLI KSZ8842-16MVLI
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 128-LQFP (14 x 14 mm) 128-LQFP (14 x 14 mm) 128-LQFP (14 x 14 mm) 128-LQFP (14 x 14 mm)
Ethernet Port Count 2 ports 2 ports 2 ports 2 ports
Supported Ethernet Speeds 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps
Host Interface Width 32 bit 32 bit 16 bit, 50% narrower 16 bit, 50% narrower
CPU Interface Class Generic parallel non-PCI interface Generic parallel non-PCI interface Non-PCI interface Non-PCI interface
Lead Pitch 0.4 mm 0.4 mm 0.4 mm 0.4 mm

Key Differentiators

  • Wider host data path than the 16-bit KSZ8842 alternatives (vs KSZ8842-16MVLI)
  • Industrial-grade ordering configuration (vs KSZ8842-32MVL)
  • Compact 14 x 14 mm footprint with two integrated Ethernet ports (vs KSZ8842-32MQL)

Design Notes

Route both Ethernet ports as controlled-impedance differential pairs and maintain a continuous ground reference beneath and between the pairs. The KSZ8842-32MVLI combines two 10/100 channels with a 32-bit parallel host bus in a dense 128-LQFP package. Separate the Ethernet routing from noisy switching nodes, avoid stubs, and follow the manufacturer reference layout for component placement and via transitions.

Treat the generic 32-bit host bus as a simultaneous-switching interface when planning return-current paths. Use a solid reference plane, minimize layer transitions, and place termination or damping components only where required by the host-bus timing design. Validate setup and hold timing at the processor and switch rather than relying solely on nominal bus width, because package and routing parasitics can affect a wide parallel interface.

Design the 3.1 V to 3.5 V supply rail so it remains within the device limits at the IC pins under Ethernet traffic and processor activity. Place decoupling capacitors close to the appropriate power and ground leads using the manufacturer reference circuit. Confirm which LQFP leads are power or ground rather than inferring them from package position, and use separate filtering for noisy external loads to prevent conducted disturbances from reaching the Ethernet and host interface sections.

Do not substitute KSZ8842-32MQL for KSZ8842-32MVLI without redesigning the footprint: KSZ8842-32MQL uses a 128-PQFP measuring 14 x 20 mm, whereas the target uses a 14 x 14 mm 128-LQFP. Likewise, a 16-bit KSZ8842 alternative can require additional transfer cycles and driver changes. Verify package drawings, bus width, temperature grade, and ordering information together before approving a substitution.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Compliant
Conflict Minerals
Unknown

RoHS compliance and halogen-free status are identified for KSZ8842-32MVLI. The component is an industrial-grade Ethernet interface IC, not an automotive AEC-Q100-qualified device.

Related Searches

ksz8842 16mvli ksz8842 pmql micrel ksz8842 KSZ8842-32MVLI datasheet KSZ8842-32MVLI datasheet pdf KSZ8842-32MVLI pinout KSZ8842-32MVLI equivalent KSZ8842-32MVLI replacement KSZ8842-32MVLI cross reference KSZ8842-32MVLI price KSZ8842-32MVLI stock Microchip KSZ8842-32MVLI

Related Components & Terms

Microchip Technology Micrel Semiconductor KSZ8842-32MVLI KSZ8842-32MVL KSZ8842-16MBLI KSZ8842-16MVLI KSZ8842-32MQL Ethernet switch network interface controller embedded Ethernet 10/100 Base-T Fast Ethernet integrated Ethernet PHY generic parallel CPU interface non-PCI interface 32-bit host bus 128-LQFP LQFP package family surface-mount package industrial temperature grade differential-pair routing RoHS halogen-free
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details