Microchip Technology

LAN8710AI-EZK-TR - 10/100 Ethernet PHY | Microchip Technology

MPN: LAN8710AI-EZK-TR ✓ فعال
Integrated Vdss IEEE 802.3-2005 Rds(on) 32-QFN, 5 mm x 5 mm Package
MOQ: 1 |

LAN8710AI-EZK-TR جائزہ

The Microchip Technology LAN8710AI-EZK-TR is a single-channel 10BASE-T/100BASE-TX Ethernet physical-layer transceiver with MII and RMII host interfaces, auto-negotiation, HP Auto-MDIX, integrated voltage regulation, and integrated ESD protection. It is packaged in a 32-pin QFN measuring 5 mm by 5 mm and is designed for compact consumer, industrial, and enterprise equipment.

An Ethernet PHY is the physical-layer component that translates data between a host digital interface and copper cabling. The LAN8710A family supports 10 Mbps and 100 Mbps links, while MII and RMII connectivity allows it to pair with digital Ethernet controllers or application processors. Within the network hierarchy, the part operates below the Ethernet MAC and above the transformer-coupled 10/100BASE-T cable interface.

The device provides auto-negotiation for automatic speed and duplex selection and HP Auto-MDIX support, allowing direct-connect and crossover cables without a manual crossover switch. Its variable I/O voltage supports adaptation to the digital interface voltage, while the integrated regulator and ESD-protection components reduce external component count. The manufacturer identifies the LAN8710A family as a low-power, small-footprint solution for consumer, industrial, and enterprise applications.

The LAN8710AI-EZK-TR is part of the LAN8710A/LAN8710Ai family and supports both IEEE 802.3u MII and reduced-pin-count RMII interfaces. These host-side interfaces provide design flexibility for embedded processors, industrial controllers, set-top equipment, printers, network appliances, and other 10/100 Ethernet products. The 5 mm by 5 mm QFN footprint helps limit board area in space-constrained equipment.

Typical deployments include industrial automation controllers, network management appliances, embedded Ethernet equipment, printers, consumer-electronics accessories, and communications equipment. For a new design, confirm that the selected processor exposes a compatible MII or RMII interface and verify the required clock, supply, and magnetics requirements against the manufacturer datasheet before schematic release.

Layout quality is especially important around a high-speed mixed-signal device. Place the PHY close to the Ethernet connector and network magnetics, keep copper paths short, provide clean return paths, and follow the manufacturer reference layout. Differential-pair geometry, via symmetry, plane continuity, and isolation from noisy switching circuitry directly influence signal integrity and EMC performance.

This product summary combines the exact orderable MPN, package information, interface capabilities, family-level features, lifecycle information, and application guidance. It also identifies where application-specific electrical limits must be confirmed in the manufacturer datasheet before schematic and layout signoff.

کے لیے ڈراپ اِن متبادل LAN8710AI-EZK-TR — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں LAN8710AI-EZK-TR (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package.

Microchip Technology
Package: 32-QFN
موازنہ کریں LAN8710AI-EZK-TR →
Microchip Technology
Package: 32-QFN
موازنہ کریں LAN8710AI-EZK-TR →

LAN8710A-EZK-TR

✅ ڈراپ-اِن
📦 32-QFN (5x5 mm)
Same 10/100 Ethernet PHY architecture and 32-QFN 5 mm x 5 mm footprint, but the ordering code omits the I temperature-grade designation; the exact temperature limit must be checked before substitution.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LAN8710AI-EZK

✅ ڈراپ-اِن
📦 32-QFN (5x5 mm)
Same industrial-temperature LAN8710Ai device and 32-QFN 5 mm x 5 mm footprint, but without the TR tape-and-reel ordering suffix; package reel configuration must be matched separately.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LAN8710AI-EZK-TR تفصیلات

Product Type 10/100 Ethernet PHY transceiver
Supported Data Rates 10 Mbps and 100 Mbps
Ethernet Standards IEEE 802.3-2005
Host Interface MII and RMII
Transceiver Channels 1 channel
Cable Standard 10BASE-T and 100BASE-TX
Auto-Negotiation Supported
Auto-MDIX HP Auto-MDIX supported
Integrated Voltage Regulator Integrated
Integrated ESD Protection Integrated
Variable I/O Voltage Supported
پیکیج 32-QFN, 5 mm x 5 mm
ماؤنٹنگ ٹائپ Surface mount
Temperature Grade Industrial temperature
Packaging Tape and reel
RoHS اسٹیٹس Compliant
AEC-Q100 Qualification Not applicable

LAN8710AI-EZK-TR 32-qfn, 5 mm x 5 mm پن کنفیگریشن گائیڈ

LAN8710AI-EZK-TR (32-qfn, 5 mm x 5 mm پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

LAN8710AI-EZK-TR کے لیے 32-qfn, 5 mm x 5 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں LAN8710AI-EZK-TR.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

LAN8710AI-EZK-TR کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Automation Controller, Network Management Appliance, Embedded Linux Control System, Connected Printer, Consumer Electronics Accessory, Communications Equipment.

🏭

Industrial Automation Controller

The LAN8710AI-EZK-TR is suitable for a compact industrial controller that needs a 10/100 Ethernet management or communications link. Its MII and RMII host interfaces allow connection to an embedded processor or Ethernet controller, while 10 Mbps and 100 Mbps support accommodates common factory-network traffic. Auto-negotiation selects speed and duplex automatically, and HP Auto-MDIX removes the need for a manual crossover connection. The 5 mm by 5 mm 32-QFN footprint preserves board area for densely populated control equipment. For deployment, verify the exact temperature range, isolation needs, magnetics, and reference-layout requirements before production release.

🌐

Network Management Appliance

The LAN8710AI-EZK-TR provides a compact copper-network interface for management appliances, access units, and small gateways operating at 10 or 100 Mbps. The MII interface supports conventional parallel MAC signaling, while RMII offers a lower-pin-count option for compatible processors. Integrated voltage regulation and ESD protection can reduce external component requirements, and the integrated PHY keeps the host board compact. The device's auto-negotiation and HP Auto-MDIX features simplify interoperability with installed network equipment. Designers should confirm regulator output requirements, magnetics selection, isolation strategy, and thermal performance against the enclosure and operating environment.

🖥️

Embedded Linux Control System

The LAN8710AI-EZK-TR can connect an embedded Linux processor to a 10/100BASE-T network through MII or RMII. The RMII option is especially useful where board routing and connector space are constrained, while MII provides compatibility with controllers that expose the wider parallel interface. The PHY supports auto-negotiation and HP Auto-MDIX, allowing the operating system to establish a link with standard switches and direct peer connections. Its small 32-QFN package supports compact control hardware. Firmware and board design must coordinate RMII timing, reference-clock routing, strap configuration, and driver support before the interface can operate reliably.

🔧

Connected Printer

The LAN8710AI-EZK-TR supports a wired print server or connected printer requiring a standard 10/100 Ethernet port. At 100 Mbps, it provides sufficient throughput for network printing, management traffic, and firmware distribution, while auto-negotiation allows operation on both 10 Mbps and 100 Mbps links. HP Auto-MDIX simplifies installation with either straight-through or crossover cabling. The small 5 mm by 5 mm package is useful inside compact printers and print-server boards. The system integrator should still account for Ethernet magnetics, isolation, connector layout, thermal conditions, and the host processor's supported MII or RMII interface.

🧩

Consumer Electronics Accessory

The LAN8710AI-EZK-TR is appropriate for consumer-electronics accessories that add a compact wired-network connection, such as media appliances, smart-home gateways, or set-top accessories. Its low-footprint 32-QFN package supports board-area reduction, while the integrated regulator and ESD protection can simplify implementation. MII and RMII interfaces provide host flexibility, and auto-negotiation plus HP Auto-MDIX improve setup compatibility with consumer routers and switches. Because these products can be exposed to ESD from cable disconnection and variable consumer environments, the complete design should follow the manufacturer's reference layout and magnetics recommendations rather than relying only on the integrated PHY protection.

🌐

Communications Equipment

The LAN8710AI-EZK-TR can provide a 10/100 management-network path in communications equipment, access terminals, and network-interface modules. Supporting both MII and RMII lets the product follow different host-controller architectures, while auto-negotiation simplifies links to legacy 10 Mbps and modern 100 Mbps infrastructure. HP Auto-MDIX permits direct and crossover cable connections, reducing installation constraints in field-service applications. The compact QFN package allows Ethernet connectivity to be added where connector and magnetics placement dominate board area. Final qualification should check the exact industrial temperature limits, isolation, EMC margin, firmware interface support, and environmental requirements for the deployed enclosure.

What is the LAN8710AI-EZK-TR?
The LAN8710AI-EZK-TR is a Microchip Technology single-channel 10/100 Ethernet PHY transceiver supporting 10 Mbps and 100 Mbps links through 10BASE-T and 100BASE-TX. According to the Microchip LAN8710A/LAN8710Ai datasheet, it provides MII and RMII host interfaces, auto-negotiation, HP Auto-MDIX, an integrated voltage regulator, and integrated ESD protection in a 32-QFN package measuring 5 mm by 5 mm.
Where can I download the LAN8710AI-EZK-TR datasheet PDF?
The official LAN8710A/LAN8710Ai datasheet PDF is available from Microchip Technology at the manufacturer URL recorded on this page. It documents the LAN8710A and LAN8710Ai family, including the 10BASE-T/100BASE-TX transceiver, MII and RMII interfaces, auto-negotiation, HP Auto-MDIX, electrical characteristics, and package details. Use the ordering-information section to confirm the relationship between LAN8710AI-EZK-TR and the other family variants.
Where can I find the LAN8710AI-EZK-TR pinout?
The LAN8710AI-EZK-TR pinout is in the pin-configuration and package sections of the Microchip LAN8710A/LAN8710Ai manufacturer datasheet. The device uses a 32-QFN package with 5 mm by 5 mm dimensions and exposes MII or RMII host-side signals, Ethernet analog connections, supplies, clock, and control functions. Assign PCB nets directly from the datasheet pin-description table rather than relying on a generic 32-QFN drawing.
What interfaces does the LAN8710AI-EZK-TR support?
The LAN8710AI-EZK-TR supports both the Media Independent Interface, or MII, and the Reduced Media Independent Interface, or RMII. According to the Microchip LAN8710A/LAN8710Ai datasheet, the family communicates with an Ethernet MAC through these digital interfaces while implementing the 10BASE-T and 100BASE-TX physical layers. RMII can reduce host-side signal count when the connected Ethernet controller supports it.
Does the LAN8710AI-EZK-TR support auto-MDIX and auto-negotiation?
Yes, the LAN8710AI-EZK-TR supports auto-negotiation and HP Auto-MDIX. The Microchip LAN8710A/LAN8710Ai datasheet states that auto-negotiation automatically selects the best available speed and duplex mode, while HP Auto-MDIX permits both direct-connect and crossover LAN cables. These functions simplify cabling and reduce the need for manual link configuration.
Where can I buy the LAN8710AI-EZK-TR?
You can request a quote for the LAN8710AI-EZK-TR through the Request a Quote form on this page. The form should be used to confirm current availability, minimum order quantity, packaging, lead time, and delivery requirements for the exact LAN8710AI-EZK-TR orderable MPN. Microchip’s direct product listing also identifies tape-and-reel inventory for this part.
What is the price of the LAN8710AI-EZK-TR?
Use the Request a Quote form on this page for the current commercial price of the LAN8710AI-EZK-TR. The form can confirm unit pricing, quantity breaks, stock, and lead time for the exact MPN rather than a family-level or starting-price entry. A 32-QFN tape-and-reel package and its order quantity should be stated on the quote request to avoid ambiguity.
What is the lead time for the LAN8710AI-EZK-TR?
The Request a Quote form on this page is the appropriate route for a current lead-time confirmation for LAN8710AI-EZK-TR. Microchip’s direct listing shows both partial-reel and full-reel inventory with estimated shipment dates, but current scheduling should be reconfirmed because allocation and logistics can change. State the required reel quantity and target receiving date in the request.
Is the LAN8710AI-EZK-TR in stock?
Current inventory should be checked through the Request a Quote form on this page for the exact LAN8710AI-EZK-TR MPN. The Microchip direct listing reports 15,060 units available and distinguishes 60-unit partial reels from 15,000-unit full reels. Submit the desired reel quantity and packaging requirement to obtain a transaction-ready availability confirmation.
When should I choose the LAN8710AI-EZK-TR over another 10/100 Ethernet PHY?
Choose the LAN8710AI-EZK-TR when a compact 10/100 link, an MII or RMII host interface, and integrated voltage regulation and ESD protection are required. According to the Microchip LAN8710A/LAN8710Ai datasheet, the family is intended for low-power consumer, industrial, and enterprise designs. Verify supply, clocking, thermal, register, and magnetics requirements before selecting it over a different PHY family.
Is the LAN8710AI-EZK-TR suitable for industrial Ethernet equipment?
The LAN8710AI-EZK-TR is marketed for industrial applications and uses an industrial-temperature ordering variant, but suitability depends on the complete equipment design. Its 10/100 Ethernet capability, HP Auto-MDIX, and integrated protection features support robust wired-network products. Confirm the full operating-temperature limits, isolation requirements, environmental exposure, and EMC design using the manufacturer datasheet before deployment.
What is the difference between LAN8710AI-EZK-TR and LAN8710A-EZK-TR?
The LAN8710AI-EZK-TR belongs to the industrial-temperature ordering family, while LAN8710A-EZK-TR is the corresponding non-I temperature-grade ordering variant. Both appear in the same 32-QFN family and share the core 10/100 Ethernet PHY architecture described by Microchip. For an existing design, compare the exact temperature grade, suffix codes, and qualified ordering details in the manufacturer ordering information before substitution.
What can replace the LAN8710AI-EZK-TR?
The closest same-footprint choices are LAN8710AI-EZK and LAN8710A-EZK-TR, but a replacement must retain the correct temperature grade, tape-and-reel suffix, and device behavior. The LAN8710AI-EZK is the non-reel ordering form of the industrial-temperature device, whereas LAN8710A-EZK-TR changes the temperature-grade code. Cross-reference listings that describe a part as merely functionally equivalent do not by themselves prove pin-to-pin drop-in compatibility.
What is the best Microchip equivalent for LAN8710AI-EZK-TR?
The most defensible Microchip same-footprint equivalent is LAN8710A-EZK-TR when the required temperature grade remains acceptable for the design. It retains the 5 mm by 5 mm 32-QFN package and the LAN8710A 10/100 Ethernet PHY family, while differing in the temperature-grade designation. For production replacement, verify electrical ratings, register behavior, qualification requirements, and lifecycle status against the original design requirements.
What are the key specifications of LAN8710AI-EZK-TR that engineers should know?
The LAN8710AI-EZK-TR is a 10/100 Ethernet PHY with 10 Mbps and 100 Mbps support, MII and RMII host interfaces, auto-negotiation, HP Auto-MDIX, an integrated voltage regulator, integrated ESD protection, and variable I/O voltage. According to the Microchip LAN8710A/LAN8710Ai datasheet, it is IEEE 802.3-2005 compliant. The exact orderable device uses a 32-QFN package measuring 5 mm by 5 mm and industrial-temperature grading.

کے لیے انجینئرنگ ریفرنس ڈیٹا LAN8710AI-EZK-TR — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose LAN8710AI-EZK-TR for a compact 10/100 Ethernet design that requires the industrial-temperature ordering variant, MII or RMII connectivity, auto-negotiation, HP Auto-MDIX, and a 5 mm by 5 mm 32-QFN footprint. Choose LAN8710A-EZK-TR when the same PHY architecture and footprint are needed but the required temperature grade can be met without the I designation; review the exact operating-temperature limits before substitution. Choose LAN8710AI-EZK when the electrical and temperature requirements are unchanged and only the reel configuration differs, since it lacks the TR suffix. Functional alternatives from other Ethernet PHY families should not be treated as drop-in parts unless their package, pinout, clocking, supplies, register behavior, and magnetics requirements have been independently verified.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ LAN8710A-EZK-TR LAN8710AI-EZK
Package 32-QFN (5x5 mm) 32-QFN (5x5 mm) 32-QFN (5x5 mm)
Brand Microchip Technology Microchip Technology Microchip Technology
Product Type 10/100 Ethernet PHY transceiver 10/100 Ethernet PHY transceiver 10/100 Ethernet PHY transceiver
Supported Data Rates 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps
Host Interface MII and RMII MII and RMII MII and RMII
Ethernet Compliance IEEE 802.3-2005 IEEE 802.3-2005 IEEE 802.3-2005
Auto-Negotiation Supported Supported Supported
Auto-MDIX HP Auto-MDIX supported HP Auto-MDIX supported HP Auto-MDIX supported
Temperature-Grade Designation Industrial-temperature I designation Non-I designation; exact limits differ Industrial-temperature I designation
Ordering Packaging TR tape-and-reel suffix TR tape-and-reel suffix No TR suffix; reel configuration differs

اہم امتیازی خصوصیات

  • Maintains the industrial-temperature ordering designation (بمقابلہLAN8710A-EZK-TR)
  • Preserves the exact industrial-temperature device identity (بمقابلہLAN8710AI-EZK)
  • Combines MII and RMII with integrated protection functions (بمقابلہLAN8710A-EZK-TR)

ڈیزائن نوٹس

Place the LAN8710AI-EZK-TR, Ethernet magnetics, and RJ45 connector in the same compact signal path. Route the Ethernet analog and digital differential nets as short, symmetrical pairs with matched via transitions and continuous reference planes. Keep the RMII or MII host traces away from the magnetics and connector area, and follow the manufacturer reference layout to minimize skew, insertion loss, and EMC radiation.

Design the supply network around the exact core and variable I/O voltage requirements in the manufacturer datasheet. Keep the PHY and its decoupling network close together, provide a low-impedance return path, and place bulk and high-frequency capacitors at the locations shown by the reference design. Verify startup sequencing, regulator headroom, and load behavior at the intended Ethernet line rate rather than assuming the integrated regulator eliminates all board-level constraints.

Validate the MII or RMII interface timing, reference clock, and control signals under the selected operating mode. For RMII, use a clean, low-jitter clock source and match trace lengths where the interface implementation requires it. For MII, review setup and hold timing across the complete operating-temperature range. Leave test access for signal measurement and use the manufacturer's evaluation-board schematic as a reference for the intended PHY configuration.

Do not treat functional-equivalent cross-reference listings as proof that a substitute is pin-compatible. Verify package dimensions, exposed-pad requirements, pin names, strap configuration, register behavior, clock requirements, temperature grade, and ESD architecture. The LAN8710AI-EZK and LAN8710A-EZK-TR differ in ordering temperature-grade information, and the absence of the TR suffix changes reel configuration even though the electrical family is closely related.

تعمیل کی معلومات

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

RoHS compliance is reported in the manufacturer-family product information. AEC-Q100 is not applicable to this industrial Ethernet transceiver. REACH, lead-free, halogen-free, and conflict-minerals status are unknown.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-14 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

lan8710ai ezk tr lan8710ai ezk datasheet LAN8710AI-EZK-TR datasheet LAN8710AI-EZK-TR datasheet pdf LAN8710AI-EZK-TR pinout LAN8710AI-EZK-TR equivalent LAN8710AI-EZK-TR replacement LAN8710AI-EZK-TR cross reference LAN8710AI-EZK-TR vs LAN8710A-EZK-TR Microchip LAN8710AI-EZK-TR LAN8710AI-EZK-TR price LAN8710AI-EZK-TR stock LAN8710AI 32-QFN pinout LAN8710AI Ethernet PHY application circuit

متعلقہ اجزاء اور اصطلاحات

Microchip Technology LAN8710AI-EZK-TR LAN8710A-EZK-TR LAN8710AI-EZK LAN8710A LAN8710Ai Ethernet PHY physical-layer transceiver 10BASE-T 100BASE-TX MII RMII IEEE 802.3-2005 auto-negotiation HP Auto-MDIX variable I/O voltage integrated voltage regulator integrated ESD protection 32-QFN QFN package family surface-mount technology industrial automation network management appliance Ethernet magnetics
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں