Microchip Technology

LAN9255-I/ZMX018 - EtherCAT Controller | Microchip

MPN: LAN9255-I/ZMX018 ✓ فعال
3.3 V Vdss 128-pin TQFP, 14 x 14 mm Package 256 kB Memory
MOQ: 1 |

LAN9255-I/ZMX018 جائزہ

The Microchip Technology LAN9255-I/ZMX018 is a 2/3-port EtherCAT device controller with dual integrated 100BASE-TX PHYs and an integrated 32-bit Arm Cortex-M4F MCU, packaged in a 128-pin TQFP measuring 14 x 14 mm. The device supports 100 Mbps Ethernet operation and includes USB 2.0 and RMII interfaces, allowing EtherCAT slave-controller functions to be consolidated into one system-in-package device.

An EtherCAT device controller, or ESC, is the dedicated interface between an EtherCAT network and embedded automation hardware. It manages EtherCAT frames, distributed clocks, and slave-controller behavior while exposing a parallel host interface to an application processor. The LAN9255 combines that controller role with a Cortex-M4F microcontroller and two Ethernet PHYs, reducing the number of discrete devices required in a compact industrial control design.

Key features include integration of the LAN9253 EtherCAT controller, dual full-duplex 100BASE-TX transceivers, and a SAM E53J microcontroller with 256 kB of memory. The two integrated PHYs support 100 Mbps 100BASE-TX links for EtherCAT line and power wiring. A USB 2.0 interface and RMII interface provide additional connectivity for configuration, debugging, or host-side integration.

The LAN9255 is implemented as a system-in-package that combines the EtherCAT controller, PHYs, and Cortex-M4F MCU in one 128-pin TQFP package. This integration simplifies board partitioning compared with a discrete ESC, external PHY, and separate microcontroller arrangement. It does not, however, eliminate the need for careful Ethernet layout, clock planning, decoupling, and thermal assessment.

Typical applications include compact EtherCAT slave controllers, industrial I/O modules, motion-control equipment, servo-drive interfaces, factory-automation nodes, and Ethernet-connected embedded control systems. The integrated MCU is especially useful when the slave requires local supervisory logic, diagnostics, or application-specific processing in addition to the EtherCAT datalink function.

The most important design consideration is the 128-pin mixed-signal package. Its Ethernet differential pairs, supply rails, ground structure, and high-speed digital signals require deliberate placement and routing on a multilayer PCB. Keep the PHY connections short and symmetric, provide the prescribed decoupling near the supply pins, and follow the reference layout and component-placement guidance in the manufacturer datasheet.

This product record combines the official LAN9255 datasheet, package and interface identification, lifecycle information, and drop-in comparison data in one engineering-focused reference. It also highlights the practical differences among LAN9255 ordering variants and explains when the integrated MCU, dual PHY, and 128-pin TQFP package justify the consolidation.

کے لیے ڈراپ اِن متبادل LAN9255-I/ZMX018 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں LAN9255-I/ZMX018 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Supply Voltage, Operating Temperature, Product Type.

Microchip Technology
Package: 128-pin TQFP with exposed pad
Operating Temperature: -40°C to +105°C
Product Type: EtherCAT device controller with integrated microcontroller
Microchip Technology
Package: 128-TQFP-EP (14x14 mm)
Supply Voltage: 3.3 V (typical, with internal regulators)
Operating Temperature: -40C to +85C (industrial)

LAN9255-V/ZMX018

✅ ڈراپ-اِن
Microchip Technology
📦 128-pin TQFP (14 x 14 mm)
EtherCAT device controller with integrated microcontroller · 2/3-port · 32-bit Arm Cortex-M4F · 256K · 3.3 V · 100 Mbps · 2 · IEEE 802.3 100BASE-TX

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LAN9255-V/ZMX020

✅ ڈراپ-اِن
Microchip Technology
📦 128-pin TQFP (14 x 14 mm)
EtherCAT Slave Controller with integrated MCU · EtherCAT (IEC 61158) · 2/3 ports (EtherCAT) · Dual integrated 100BASE-TX · 100 Mbps full-duplex · SAM E53J ARM Cortex-M4F · 32-bit ARM Cortex-M4F with FPU · 1024 KB

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LAN9255/ZMX018

✅ ڈراپ-اِن
📦 128-pin TQFP (14 x 14 mm)
Same 128-pin TQFP footprint and ZMX018 configuration; the I suffix difference must be checked against the ordering table

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LAN9255-I/ZMX018 تفصیلات

Device Type 2/3-port EtherCAT device controller
Integrated MCU Core 32-bit Arm Cortex-M4F
Integrated Memory 256 kB
Integrated Ethernet PHYs 2 full-duplex 100BASE-TX PHYs
Ethernet Data Rate 100 Mbps
Ethernet Standard IEEE 802.3
USB Interface USB 2.0
Host Interface RMII
سپلائی وولٹیج 3.3 V
پیکیج 128-pin TQFP, 14 x 14 mm
ماؤنٹنگ ٹائپ Surface mount
EtherCAT Ports 2/3 ports
Processor Architecture 32-bit

LAN9255-I/ZMX018 128-pin tqfp, 14 x 14 mm پن کنفیگریشن گائیڈ

LAN9255-I/ZMX018 (128-pin tqfp, 14 x 14 mm پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

LAN9255-I/ZMX018 کے لیے 128-pin tqfp, 14 x 14 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں LAN9255-I/ZMX018.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

LAN9255-I/ZMX018 کے لیے موزوں ہے 6 ایپلیکیشنs: Compact EtherCAT Slave Controllers, Industrial Ethernet I/O Modules, Servo Drive Network Interfaces, Factory Automation Edge Nodes, Embedded EtherCAT Control Modules, Ethernet-Connected Test and Control Equipment.

🏭

Compact EtherCAT Slave Controllers

The LAN9255-I/ZMX018 fits compact EtherCAT slave designs because it combines a 2/3-port EtherCAT device controller with two integrated 100BASE-TX PHYs in one 128-pin TQFP package. The on-package Arm Cortex-M4F MCU and 256 kB of memory can handle local control or diagnostics without requiring a separate processor for basic slave logic. Its 100 Mbps PHYs support the standard EtherCAT line interface, while USB 2.0 and RMII provide useful configuration and host-integration paths. The main engineering trade-off is the dense 128-pin mixed-signal footprint, which requires a multilayer PCB and careful assignment of the Ethernet, supply, clock, and digital interfaces.

🏭

Industrial Ethernet I/O Modules

The LAN9255-I/ZMX018 is appropriate for industrial Ethernet I/O modules that need EtherCAT connectivity, local diagnostics, and network-facing processing in a compact controller. Its two integrated 100BASE-TX PHYs support 100 Mbps line and power-wire networking, while the Cortex-M4F MCU provides local execution capability and 256 kB of integrated memory for protocol and supervisory code. RMII can connect a host processor when the application separates network management from real-time I/O. The design must preserve the datasheet’s differential-pair routing and grounding strategy so Ethernet performance is not limited by PCB implementation.

⚡

Servo Drive Network Interfaces

For compact servo-drive and motion-control interfaces, the LAN9255-I/ZMX018 combines EtherCAT slave-controller functionality with two 100BASE-TX PHYs and a Cortex-M4F MCU. The integrated MCU can support state-machine logic, fault handling, and local parameter management close to the network interface, reducing the number of chips needed for a basic embedded control section. Its 128-pin TQFP package requires disciplined power and ground partitioning, especially where motor-control power stages and sensitive Ethernet circuitry coexist. Copper keepouts, controlled impedance, and isolation strategy should be designed against the manufacturer reference layout.

🏭

Factory Automation Edge Nodes

The LAN9255-I/ZMX018 can serve as the communications and local-processing core of a factory-automation edge node. Two integrated full-duplex 100BASE-TX PHYs eliminate separate PHY placement for typical EtherCAT line interfaces, while the Cortex-M4F MCU executes local diagnostics and supervisory functions. USB 2.0 provides a practical configuration path during commissioning, and RMII offers a connection to a separate host when the architecture separates EtherCAT traffic from higher-level control. The principal limitation is package density: the 128-pin TQFP demands careful fanout, multilayer routing, and component-placement planning to preserve signal and thermal performance.

🖥️

Embedded EtherCAT Control Modules

The LAN9255-I/ZMX018 is useful in embedded control modules where EtherCAT functionality, Ethernet physical layers, and application processing must share a compact board area. The integrated 32-bit Cortex-M4F MCU provides local execution capability, and the 256 kB of memory reduces external component requirements for moderate firmware footprints. Its 100 Mbps dual-PHY architecture suits 100BASE-TX EtherCAT networks, while USB 2.0 can support configuration, firmware loading, or diagnostic functions. Designers should still budget external memory if the application exceeds the integrated capacity and verify the required clock, reset, and power sequencing against the manufacturer recommendations.

🔧

Ethernet-Connected Test and Control Equipment

The LAN9255-I/ZMX018 can form the networking core of compact test and measurement equipment requiring EtherCAT slave behavior and embedded control. The two integrated 100BASE-TX PHYs support deterministic 100 Mbps network links, and the Cortex-M4F MCU can manage local acquisition sequencing, configuration, and fault reporting. RMII can be used when a higher-performance host processor owns the main application workload, while USB 2.0 offers a convenient control or service interface. For laboratory instruments, the design should provide appropriate isolation and grounding rather than assuming that integration alone eliminates common-mode and EMC constraints.

تجویز کردہ پروڈکٹس کا خلاصہ

What is the LAN9255-I/ZMX018?
The LAN9255-I/ZMX018 is a Microchip Technology 2/3-port EtherCAT device controller combining an EtherCAT controller, two integrated 100BASE-TX Ethernet PHYs, and a 32-bit Arm Cortex-M4F MCU with 256 kB of memory. According to the official LAN9255 datasheet, the device is packaged as a 128-pin TQFP measuring 14 x 14 mm and supports 100 Mbps Ethernet operation.
What does the integrated MCU in LAN9255-I/ZMX018 provide?
The integrated MCU is a 32-bit Arm Cortex-M4F processor based on the SAM E53J architecture and includes 256 kB of memory. According to the official LAN9255 datasheet, it allows local EtherCAT slave-control, diagnostics, and application logic to be consolidated with the Ethernet PHYs. The processor’s maximum clock frequency is not stated in the product-page summary, so that value should be confirmed from the manufacturer datasheet.
How many Ethernet PHYs are integrated in the LAN9255-I/ZMX018?
The LAN9255-I/ZMX018 integrates two full-duplex 100BASE-TX Ethernet PHYs. Microchip describes the LAN9255 as an EtherCAT device controller with dual PHYs supporting 100 Mbps 100BASE-TX operation. These integrated transceivers reduce the need for separate Ethernet PHY devices in compact EtherCAT slave designs.
What interfaces are available on the LAN9255-I/ZMX018?
The LAN9255-I/ZMX018 provides USB 2.0 and RMII interfaces in addition to its integrated 100BASE-TX PHYs. The manufacturer identifies the part as an IEEE 802.3 Ethernet controller supporting EtherCAT, USB 2.0, RMII, and 100BASE-TX connectivity. RMII can connect the device to a host processor, while USB 2.0 can support configuration or development workflows.
Where can I download the LAN9255-I/ZMX018 datasheet PDF?
The official LAN9255 datasheet PDF is available from Microchip at https://ww1.microchip.com/downloads/en/DeviceDoc/00003646B.pdf. The document covers LAN9255-specific specifications that supplement the LAN9253 and SAM E53J documentation. Use its pin-description table, electrical characteristics, reference layout, and interface guidance when assigning the 128-pin TQFP connections.
Where can I find the LAN9255-I/ZMX018 pinout?
The authoritative LAN9255-I/ZMX018 pinout appears in the pin-description table of Microchip’s official LAN9255 datasheet, document 00003646B. Use that table to identify power, ground, Ethernet differential, RMII, USB, reset, clock, and EtherCAT signal assignments. The 128-pin package is a TQFP, and every assigned net should be checked against the selected PCB footprint before fabrication.
LAN9255-I/ZMX018 vs LAN9255-V/ZMX018: which should I choose?
The LAN9255-I/ZMX018 and LAN9255-V/ZMX018 share the same 128-pin TQFP footprint and the same EtherCAT controller, dual-PHY, and Cortex-M4F integration. The ordering-code difference identifies different device variants, but the available listing summaries do not define the temperature or qualification distinction. Review the manufacturer’s ordering table before treating either variant as a substitute.
Can LAN9255-V/ZMX018 replace LAN9255-I/ZMX018 on an existing PCB?
The LAN9255-V/ZMX018 is a pin-compatible candidate because it uses the same 128-pin TQFP package and implements the same LAN9255 Ethernet controller architecture. However, the I and V suffix criteria are not defined in the available product summaries. Confirm the ordering information, temperature range, qualification, and firmware expectations in the manufacturer datasheet before approving it as a production replacement.
When should I choose LAN9255-I/ZMX018 instead of a discrete EtherCAT controller?
Choose the LAN9255-I/ZMX018 when a design benefits from integrating an EtherCAT controller, two 100BASE-TX PHYs, and a Cortex-M4F MCU in one 128-pin package. This can reduce board partitioning and component count in compact slave-controller designs. Choose a discrete solution when firmware-portability constraints, isolated subsystem requirements, or separate supply domains make integrated consolidation less suitable.
Is LAN9255-I/ZMX018 suitable for industrial automation and EtherCAT I/O modules?
The LAN9255-I/ZMX018 is well suited to EtherCAT I/O modules because it integrates the required device-controller function, two 100BASE-TX PHYs, and local Cortex-M4F processing in one package. Its practical suitability still depends on the required industrial temperature grade, isolation, EMC design, and safety architecture. Confirm those requirements against the manufacturer ordering information before production release.
What can replace the LAN9255-I/ZMX018?
The closest documented same-footprint candidates are LAN9255-V/ZMX018, LAN9255-V/ZMX020, and LAN9255/ZMX018, all offered in the LAN9255 family’s 128-pin TQFP configuration. Their availability as drop-in replacements depends on matching the exact suffix criteria, memory configuration, qualification grade, and firmware requirements. No cross-brand drop-in equivalent is established by the available manufacturer and distributor information.
Is LAN9255-I/ZMX018 the same as LAN9255/ZMX018?
Both parts are identified as the 128-pin, 14 x 14 mm LAN9255 EtherCAT controller with integrated PHYs, but their full ordering codes are not identical. The I suffix distinguishes LAN9255-I/ZMX018 from LAN9255/ZMX018, so the manufacturer’s ordering table must be consulted before declaring them interchangeable. PCB footprint compatibility alone does not establish qualification or temperature equivalence.
What are the key specifications of LAN9255-I/ZMX018 that engineers should know?
The key specifications are a 2/3-port EtherCAT controller, two integrated 100BASE-TX PHYs, 100 Mbps Ethernet operation, a 32-bit Cortex-M4F MCU, 256 kB of integrated memory, USB 2.0, RMII, and a 128-pin 14 x 14 mm TQFP package. The device operates from a 3.3 V supply according to its distributor identification. Its system-in-package architecture consolidates the controller, PHYs, and MCU into one device.
Where can I buy LAN9255-I/ZMX018 and check its price?
Use the “Request a Quote” form on this page to request the current price, stock status, lead time, and exact package quantity for LAN9255-I/ZMX018. Because commercial terms can change by region, order quantity, and authorized channel, obtain the current quotation for the precise suffix and packing format. The 128-pin TQFP package and ordering code should be stated in the request.
What is the lead time and stock status of LAN9255-I/ZMX018?
Current stock and lead time for LAN9255-I/ZMX018 should be obtained through the “Request a Quote” form on this page. The component is listed in the market for 100 Mbps, 3.3 V operation in a 128-pin TQFP, but a listing alone does not guarantee production allocation, package quantity, or delivery timing. Include your requested quantity and target delivery date in the quotation request.
Is LAN9255-I/ZMX018 in stock?
LAN9255-I/ZMX018 is currently offered by multiple distributors, but the reliable inventory position for your order is the “Request a Quote” response on this page. Stock can vary by package quantity, date, and regional distribution center. Provide the exact MPN, target quantity, and intended tray or other packing requirement when requesting availability confirmation.

کے لیے انجینئرنگ ریفرنس ڈیٹا LAN9255-I/ZMX018 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose LAN9255-I/ZMX018 when the design needs an EtherCAT slave controller, two 100BASE-TX PHYs, and an integrated Cortex-M4F MCU with 256 kB of memory in one 128-pin TQFP. It is particularly suitable for compact industrial I/O, servo-interface, and embedded control modules where board area and component count matter. LAN9255-V/ZMX018 is a strong footprint-compatible candidate, but its I/V suffix criteria must be checked against temperature and qualification requirements. Consider LAN9255-V/ZMX020 only after confirming that its configuration difference does not alter firmware, memory, or functional requirements. LAN9255/ZMX018 may serve as a footprint-compatible alternative when the non-I ordering criteria are acceptable. For all four orderable variants, verify the manufacturer ordering table, exact pin assignments, qualification requirements, and packing format before production approval.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ LAN9255-V/ZMX018 LAN9255-V/ZMX020 LAN9255/ZMX018
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology

اہم امتیازی خصوصیات

  • Controller, PHYs, and MCU consolidated in one package (بمقابلہLAN9255-V/ZMX018)
  • Integrated local processing and memory (بمقابلہLAN9255-V/ZMX020)
  • Dual integrated 100BASE-TX Ethernet PHYs (بمقابلہLAN9255/ZMX018)

ڈیزائن نوٹس

Implement the Ethernet differential pairs as short, symmetrical routes with a continuous reference plane and no stubs or unnecessary vias. Follow the manufacturer reference layout for the 100BASE-TX PHYs because trace geometry, component placement, and return-path continuity directly affect signal integrity. Keep the controller, PHY, magnetics, and connector placement tightly grouped, and avoid routing Ethernet signals beneath switching-power or motor-drive circuitry.

Partition the 3.3 V supply into the controller, MCU, and Ethernet-related domains as directed by the manufacturer power architecture. Place decoupling capacitance at the associated supply pins with short ground returns, and preserve a low-impedance plane connection beneath the 128-pin TQFP. Validate startup, current transients, and supply sequencing with the complete load arrangement rather than only the idle controller.

Plan the 128-pin TQFP footprint and escape routing before placing the rest of the circuit. Separate Ethernet, RMII, USB, and clock routes from noisy power-converter paths, and maintain the package’s thermal and ground connectivity. Because the device integrates an EtherCAT controller, PHYs, and Cortex-M4F MCU, small routing mistakes can affect protocol timing, radio-frequency behavior, and Ethernet signal quality at the same time.

Do not approve LAN9255-V/ZMX018, LAN9255-V/ZMX020, or LAN9255/ZMX018 solely because the PCB footprints appear compatible. Verify the complete ordering suffix, temperature grade, qualification status, memory configuration, and firmware requirements in Microchip’s ordering information. Also confirm the required packing method and pin-1 orientation before releasing a production order.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The available manufacturer and distributor information does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for this ordering code. The product is an industrial Ethernet controller rather than an automotive-qualified device in the information available.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-14 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

lan9255 ethercat lan9255 i zmx020 lan9255 board microchip lan9255 LAN9255-I/ZMX018 datasheet LAN9255-I/ZMX018 pinout LAN9255-I/ZMX018 datasheet pdf LAN9255-I/ZMX018 equivalent LAN9255-I/ZMX018 replacement LAN9255-I/ZMX018 footprint LAN9255-I/ZMX018 price LAN9255-I/ZMX018 stock

متعلقہ اجزاء اور اصطلاحات

Microchip Technology LAN9255-I/ZMX018 LAN9255 LAN9253 SAM E53J Arm Cortex-M4F EtherCAT EtherCAT device controller Ethernet controller IEEE 802.3 100BASE-TX 100 Mbps Ethernet RMII USB 2.0 System-in-Package Integrated Ethernet PHY 128-pin TQFP 14 x 14 mm TQFP Surface mount Industrial automation Motion control Industrial Ethernet I/O 32-bit microcontroller 256 kB memory EVB-LAN9255
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں