Lattice Semiconductor

LFE2-70E-6F672I - 68K LUT ECP2 FPGA | Lattice Semiconductor

MPN: LFE2-70E-6F672I ✓ فعال
1.2 V Vdss 672-BBGA Package -6 Speed
MOQ: 1 |

LFE2-70E-6F672I جائزہ

Lattice Semiconductor LFE2-70E-6F672I is an ECP2/M field-programmable gate array with 68,000 look-up tables, 500 user I/O, a 1.2 V core supply, and a -6 speed grade in a 672-ball BGA package. It combines programmable logic with embedded block RAM for industrial embedded systems requiring high I/O density in a single package. The 672-BBGA package uses a 1 mm ball pitch and has a stated package height of 2.6 mm.

An FPGA is a programmable semiconductor in which logic, routing, and I/O behavior are defined after fabrication. Within the product hierarchy, this device is an FPGA, a programmable-logic device, and ultimately a semiconductor. The ECP2 family provides a platform for parallel data processing, control logic, interface bridging, and embedded system integration. Its large user-I/O count makes the 672-ball option useful when a design requires numerous external connections or multiple high-speed interfaces.

The ECP2/M architecture provides 68,000 LUTs and up to 1,032 Kb of embedded block RAM according to the ECP2 family product information. The 500-I/O configuration supports dense board-level connectivity without requiring multiple programmable devices. A 1.2 V core operating voltage reduces power-related stress in suitable system architectures, while the -6 designation identifies the device speed grade. The LFE2-70E-6F672I is identified as an industrial-temperature grade part.

The -6 speed grade is intended for designs that require substantially more timing performance than the slowest ECP2 grades. However, timing closure still depends on the selected clock, I/O standards, routing density, memory usage, and external interface requirements. Because the device contains a large number of programmable resources and I/Os, system-level timing, power, and pin-placement constraints should be evaluated together before a PCB layout is released.

Typical uses include industrial control systems, test and measurement equipment, communications infrastructure, video and display processing, embedded storage controllers, and high-pin-count interface consolidation. The ECP2/M device is particularly relevant where parallel logic, custom protocol handling, or multiple external buses must operate concurrently while retaining field-reprogrammability.

PCB implementation requires careful BGA escape routing, continuous power and ground planes, and compliance with the manufacturer's package and pin-assignment documentation. Differential and high-speed interfaces should use the manufacturer-recommended I/O standards and controlled-impedance routing. Because a 672-ball device is difficult to rework, programming, boundary-scan, and board-level validation should be planned before production quantities are released.

This product page organizes the ECP2/M capacity, package, speed, temperature, and replacement information into an engineer-focused selection guide. It also distinguishes verified drop-in options from changes that require a new pinout, package, device family, or board redesign.

کے لیے ڈراپ اِن متبادل LFE2-70E-6F672I — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

LFE2-70SE-6F672I

✅ ڈراپ-اِن
📦 672-BBGA
Uses the LFE2-70SE family identifier while retaining 68,000 LUTs, 500 I/O, a -6 speed designation, and the 672-BBGA package

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LFE2-70E-8F672I

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 672-BBGA
Changes the speed grade from -6 to -8 while retaining the LFE2-70E family, 68,000-LUT capacity, 500 I/O, and 672-BBGA footprint

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LFE2-70E-4F672I

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 672-BBGA
Changes the speed grade from -6 to -4, a slower grade, while retaining the LFE2-70E family and 672-BBGA footprint

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LFE2-70E-6F672C

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
Lattice Semiconductor
📦 672-BBGA
ECP2 · Field Programmable Gate Array (FPGA) · 68,000 elements · 8,500 LABs/CLBs · 1,056,768 bits · 500 I/O · DSP · 1.2 V

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LFE2M50E-6F672I

✅ ڈراپ-اِن
📦 672-BBGA
Changes the logic resource class from LFE2-70E to LFE2M50E while retaining the 672-BBGA package, -6 speed designation, and industrial suffix

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LFE2-70E-6F672I زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Device Type ECP2/M field-programmable gate array
Logic Capacity 68,000 LUTs
User I/O Count 500 I/O
Embedded Block RAM 1,032 Kb
Core Supply Voltage 1.2 V
Speed Grade -6
Temperature Grade Industrial
آپریٹنگ درجہ حرارت -40 °C to +100 °C junction
Package Type 672-BBGA
Package Ball Pitch 1.0 mm
Package Height 2.6 mm
Terminal Count 672 balls
Terminal Form Ball
Package Shape Square
ماؤنٹنگ ٹائپ Surface mount
FPGA Configuration Field programmable

LFE2-70E-6F672I square پن کنفیگریشن گائیڈ

LFE2-70E-6F672I (square پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

LFE2-70E-6F672I کے لیے square پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں LFE2-70E-6F672I.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

LFE2-70E-6F672I کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial PLC and Automation Controller, Test and Measurement Instrumentation, Communications Interface Consolidation, Video and Display Processing, Embedded Storage and Bus Controller, Programmable Logic Upgrade Platform.

🏭

Industrial PLC and Automation Controller

LFE2-70E-6F672I fits an industrial programmable-logic controller because its 68,000 LUTs can host sequencing, motion-control, and machine-safety-adjacent logic, while 500 user I/O provide extensive connectivity to sensors and actuators. The -6 speed grade supports timing-sensitive control paths, and the industrial rating of -40 °C to +100 °C junction suits factory equipment. Place the device beside the field-I/O circuitry, connect clean power and ground planes, and reserve the programming interface for configuration, diagnostics, and controlled field updates.

🔧

Test and Measurement Instrumentation

The 500-I/O LFE2-70E-6F672I is useful in automated test equipment where sequencing logic, pattern generation, counters, acquisition control, and instrument-bus arbitration must operate concurrently. Its 68,000 LUTs allow multiple parallel channels to be consolidated in one FPGA, while 1,032 Kb of embedded block RAM supports buffering and local data handling. For high-speed measurement paths, use the manufacturer-defined I/O standards, controlled-impedance routing, and separate analog or sensitive front-end circuitry to prevent digital switching activity from degrading measurement accuracy.

🌐

Communications Interface Consolidation

LFE2-70E-6F672I can consolidate parallel, serial, and packet-oriented interfaces in communications equipment because 500 user I/O leave substantial connectivity for transceivers, status signals, and control paths. The ECP2/M architecture permits custom protocol termination, buffering, and routing without requiring several fixed-function bridge devices. The -6 grade is appropriate for established timing targets, while 1,032 Kb of embedded block RAM can serve packet staging or dual-port buffering. Signal-integrity planning must align every external interface with the exact supported I/O standard and voltage requirements.

📺

Video and Display Processing

The high-I/O ECP2/M FPGA is suitable for pixel routing, timing generation, frame buffering, and interface conversion in video or display equipment. Its 68,000 LUTs provide parallel processing resources, and 1,032 Kb of block RAM accommodates line buffers or control data without relying entirely on external memory. The 500-I/O configuration simplifies connections among source logic, display timing, and auxiliary control signals. For reliable operation, constrain all pixel-clock paths, use appropriate I/O standards, and place decoupling close to the device's numerous power and ground balls.

🖥️

Embedded Storage and Bus Controller

LFE2-70E-6F672I can implement embedded storage controllers, flash-interface logic, data buffers, and command interpreters because the ECP2/M device combines programmable logic with 1,032 Kb of embedded block RAM. Its 500 I/O provide the pins needed for multiple data buses, status signals, and external memories. A single-FPGA implementation reduces inter-device routing and synchronization overhead, but timing closure should be checked for the selected memory interface and command-latency requirements. Use registered I/O and disciplined clocking where protocol timing is critical.

🧩

Programmable Logic Upgrade Platform

LFE2-70E-6F672I provides a useful base for industrial products that need field-updatable logic, protocol adaptation, or lifecycle extension. Its 68,000 LUTs can implement control and interface functions in one device, and its large I/O count can preserve connections to an existing control board during a redesign. Because the 672-BBGA footprint is complex and difficult to rework, prototype programming, boundary-scan access, and power sequencing before volume production. The same-package alternatives can assist continuity planning when their complete timing and temperature requirements are verified.

تجویز کردہ پروڈکٹس کا خلاصہ

LFE2-70SE-6F672I Same-package ECP2 alternative for control-logic designs استعمال ہوتا ہے: Industrial PLC and Automation Controller, Test and Measurement Instrumentation, Video and Display Processing, Programmable Logic Upgrade Platform LFE2M50E-6F672I Alternate ECP2/M resource configuration استعمال ہوتا ہے: Industrial PLC and Automation Controller, Embedded Storage and Bus Controller LFE2-70E-8F672I Higher-speed ECP2 option for timing-critical instrumentation استعمال ہوتا ہے: Test and Measurement Instrumentation, Communications Interface Consolidation, Embedded Storage and Bus Controller, Programmable Logic Upgrade Platform LFE2-70E-6F672C Lattice Semiconductor استعمال ہوتا ہے: Communications Interface Consolidation LFE2-70E-4F672I Lower-speed ECP2 option for less demanding timing استعمال ہوتا ہے: Video and Display Processing, Programmable Logic Upgrade Platform
What is LFE2-70E-6F672I?
LFE2-70E-6F672I is a Lattice Semiconductor ECP2/M field-programmable gate array with 68,000 LUTs, 500 user I/O, a 1.2 V core supply, and a 672-ball BGA package. According to the manufacturer ECP2 family information, it also provides 1,032 Kb of embedded block RAM. It is intended for industrial embedded designs requiring high logic density, extensive external connectivity, and programmable post-deployment updates.
What are the key specifications of LFE2-70E-6F672I that engineers should know?
The LFE2-70E-6F672I combines 68,000 LUTs, 500 user I/O, 1,032 Kb of embedded block RAM, a 1.2 V core voltage, and a -6 speed grade. According to the ECP2 family product information, the device uses a 672-BBGA package with a 1 mm ball pitch and an industrial temperature rating of -40 °C to +100 °C junction. These specifications make it suitable for logic-intensive embedded systems with high I/O requirements.
Where can I download the LFE2-70E-6F672I datasheet PDF?
The LFE2-70E-6F672I datasheet and product resources should be obtained from the Lattice Semiconductor ECP2 family documentation or the linked manufacturer product listing. The device is identified as an ECP2/M FPGA with 68,000 LUTs, 500 I/O, and a 672-BBGA package. Use the pin-definition, package, electrical, and recommended-design sections in the manufacturer datasheet before assigning PCB pins or finalizing power delivery.
Where can I find the LFE2-70E-6F672I pinout and ball map?
The LFE2-70E-6F672I pinout is a 672-ball BGA assignment and must be taken from the manufacturer ECP2 package documentation rather than inferred from a generic BGA diagram. Confirm pin locations, configuration pins, power balls, ground balls, and dedicated I/O positions against the exact package drawing. Accurate assignment is essential because the device uses a 1 mm ball pitch, making unreviewed escapes difficult to correct after fabrication.
What is the difference between LFE2-70E-6F672I and LFE2-70SE-6F672I?
Both devices are listed as ECP2 FPGAs with 68,000 LUTs, 500 I/O, a -6 speed designation, and a 672-BBGA package. The distinguishing family identifier is the LFE2-70SE designation, while the target uses LFE2-70E. According to the ECP2 family comparison information, package, speed, and temperature options can differ between devices, so verify the complete ordering code and pin table in manufacturer documentation before interchangeability is approved.
What can replace LFE2-70E-6F672I?
LFE2-70SE-6F672I is the closest identified same-package option because it retains 68,000 LUTs, 500 I/O, a -6 speed designation, and a 672-BBGA package. It remains a drop-in candidate only after confirming its I/O standards, configuration pins, power balls, and timing specifications against the original design. Other ECP2 speed or temperature ordering options require the same pin-by-pin and timing review before substitution.
Can LFE2-70E-6F672I replace another ECP2 FPGA?
LFE2-70E-6F672I can replace a compatible ECP2 device only when the source device has the same 672-BBGA footprint, compatible power and configuration connections, compatible I/O standards, and adequate timing performance. The 68,000-LUT and 500-I/O configuration does not by itself establish interchangeability. Confirm the source ordering code, ball map, voltage requirements, and design timing before treating the replacement as production-ready.
When should I choose LFE2-70E-6F672I over LFE2-70SE-6F672I?
Choose LFE2-70E-6F672I when the design requires the exact LFE2-70E family member specified for 68,000 LUTs, 500 I/O, a 1.2 V core, and the -6 speed grade in a 672-BBGA package. LFE2-70SE-6F672I is relevant when its separate family characteristics and timing data satisfy the system requirements. The deciding factors are verified pin compatibility, supported I/O standards, thermal performance, and tool or qualification constraints.
Is LFE2-70E-6F672I suitable for an industrial control system?
Yes, LFE2-70E-6F672I is identified as an industrial-temperature ECP2/M FPGA with an operating range of -40 °C to +100 °C junction. Its 68,000 LUTs and 500 I/O support complex control logic, parallel interfaces, and multiple peripheral connections. For production use, verify system temperature margins, power integrity, signal integrity, and functional-safety requirements rather than relying on the industrial temperature marking alone.
Where can I buy LFE2-70E-6F672I online?
Use the Request a Quote form on this page to ask about LFE2-70E-6F672I availability, package quantity, and current lead time. The exact part is an industrial-grade 672-BBGA ECP2/M FPGA with 68,000 LUTs and 500 I/O, so confirm that the quoted item includes the full suffix LFE2-70E-6F672I. Supplying the intended quantity and assembly packaging requirements helps the quotation reflect the correct production configuration.
What is the price of LFE2-70E-6F672I?
Current LFE2-70E-6F672I pricing is managed through the Request a Quote form on this page. The request should state the required quantity and desired package or shipment configuration. The device is a 672-BBGA industrial ECP2/M FPGA with 68,000 LUTs and 500 I/O, so quotes should be checked against the exact full MPN rather than a generic ECP2 device or another package option.
What is the lead time for LFE2-70E-6F672I?
The current lead time for LFE2-70E-6F672I should be confirmed through the Request a Quote form on this page by stating the required order quantity and target delivery date. Availability can vary with device grade, package configuration, and production scheduling. Because this is a 672-ball BGA FPGA rather than a common small-outline package, confirm the exact ordering code and assembly requirements before committing the schedule.
Is LFE2-70E-6F672I in stock?
Current LFE2-70E-6F672I stock should be checked through the Request a Quote form on this page. Include the required quantity, target shipment date, and preferred packaging configuration in the request. The part is an industrial-grade ECP2/M FPGA in a 672-BBGA package, making exact-MPN and quantity confirmation important before treating any availability statement as applicable to a production order.
LFE2-70E-6F672I vs LFE2-70SE-6F672I for a 672-BBGA design?
LFE2-70SE-6F672I is the closer candidate because it shares the 672-BBGA package, 68,000-LUT capacity, 500-I/O count, and -6 speed designation with LFE2-70E-6F672I. It should be selected over a different FPGA family when those common characteristics are essential, but only after checking the manufacturer comparison data for pin, voltage, I/O, and timing differences. A shared package name alone does not guarantee that every ball assignment is interchangeable.
How do I design a PCB for LFE2-70E-6F672I?
Start the LFE2-70E-6F672I layout from the exact 672-BBGA package drawing and ball assignment, including exposed or thermal-related land requirements if specified. Provide uninterrupted power and ground planes, low-impedance decoupling paths, controlled-impedance routing for high-speed interfaces, and clean return paths. Keep the 1 mm-pitch BGA escape geometry manufacturable and validate assembly, boundary-scan access, programming connections, and test coverage before release.

کے لیے انجینئرنگ ریفرنس ڈیٹا LFE2-70E-6F672I — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose LFE2-70E-6F672I when the design needs an industrial-temperature ECP2/M FPGA with 68,000 LUTs, 500 user I/O, a 1.2 V core, and a -6 speed grade in a 672-BBGA package. Choose LFE2-70E-8F672I when the same footprint and capacity are retained but additional timing margin is useful; confirm that the higher grade satisfies the power and thermal design. Choose LFE2-70E-4F672I only for less demanding timing, since its -4 speed grade provides less margin than -6. Choose LFE2-70E-6F672C when commercial-temperature operation is sufficient, but not for an industrial environmental requirement. Consider LFE2-70SE-6F672I as the closest identified same-speed, same-package family alternative, subject to verification of its device-specific pin, timing, and I/O characteristics. LFE2M50E-6F672I is a lower-proximity option with a different family resource configuration and should be selected only after resource, memory, and pin assignments are compared.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ LFE2-70SE-6F672I LFE2-70E-8F672I LFE2-70E-4F672I LFE2-70E-6F672C
Brand Lattice Semiconductor Corporation Lattice Semiconductor Corporation Lattice Semiconductor Corporation Lattice Semiconductor Corporation Lattice Semiconductor Corporation
Package 672-BBGA 672-BBGA 672-BBGA 672-BBGA 672-BBGA
Device Family LFE2-70E LFE2-70SE LFE2-70E LFE2-70E LFE2-70E
Logic Capacity 68,000 LUTs 68,000 LUTs 68,000 LUTs 68,000 LUTs 68,000 LUTs
User I/O 500 I/O 500 I/O 500 I/O 500 I/O 500 I/O
Core Voltage 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V
Speed Grade -6 -6 -8 -4 -6
Temperature Grade Industrial Industrial Industrial Industrial Commercial
Embedded Block RAM 1,032 Kb 1,032 Kb 1,032 Kb 1,032 Kb 1,032 Kb

اہم امتیازی خصوصیات

  • Higher speed grade within the same 672-BBGA ECP2/M configuration (بمقابلہLFE2-70E-4F672I)
  • Maintains the required industrial temperature class (بمقابلہLFE2-70E-6F672C)
  • Closest identified same-speed, same-package family alternative (بمقابلہLFE2-70SE-6F672I)

ڈیزائن نوٹس

Use the manufacturer 672-BBGA land pattern and exact ball map rather than a generic 672-ball footprint. The package uses a 1 mm ball pitch, so verify escape-routing clearance, drill and pad dimensions, solder-mask design, and assembly capability before layout release. Preserve direct access to configuration and test pins and place decoupling capacitors close to the corresponding power balls.

Create a continuous, low-impedance power-distribution network with multiple connections to the FPGA's power balls and an uninterrupted ground reference. Follow the manufacturer guidance for core, auxiliary, and I/O supplies, including permitted sequencing and ramp requirements. Estimate maximum dynamic and static current before selecting regulators, then verify the complete power tree across temperature, process, and operating-frequency corners.

Assign high-speed interfaces only to banks with the required I/O standards and voltage levels. Match trace lengths and impedances according to the selected interface, keep clocks away from noisy switching paths, and provide continuous return paths beneath high-speed pairs. Treat the 500-I/O device as a signal-integrity system rather than only a logic-placement problem, especially when several external buses operate concurrently.

Do not infer interchangeability solely from a shared 672-BBGA package, LUT count, or speed suffix. Compare every power ball, configuration pin, I/O standard, clock-capable pin, and timing constraint against the manufacturer package and device documentation. The -4 option can reduce timing margin, the -8 option changes the speed class, and the commercial-temperature option cannot replace an industrial requirement.

Estimate junction temperature from total FPGA dissipation, package thermal resistance, board construction, airflow, and the selected I/O activity level. The dense 672-ball package can require deliberate copper distribution even though it offers many power and ground connections. Validate the assembled board across the industrial temperature range and ensure the enclosure does not trap heat around the device.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The industrial temperature grade is not an automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require manufacturer documentation.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

LFE2-70E-6F672I datasheet LFE2-70E-6F672I datasheet pdf LFE2-70E-6F672I pinout LFE2-70E-6F672I specifications LFE2-70E-6F672I 672-BBGA LFE2-70E-6F672I price LFE2-70E-6F672I stock LFE2-70E-6F672I equivalent LFE2-70E-6F672I replacement LFE2-70E-6F672I vs LFE2-70SE-6F672I LFE2-70E-6F672I footprint LFE2-70E-6F672I application circuit Lattice LFE2-70E-6F672I

متعلقہ اجزاء اور اصطلاحات

Lattice Semiconductor Corporation LFE2-70E-6F672I LFE2-70SE-6F672I LFE2-70E-8F672I LFE2-70E-4F672I LFE2-70E-6F672C LFE2M50E-6F672I ECP2/M FPGA field-programmable gate array programmable-logic device semiconductor look-up table LUT embedded block RAM EBR user I/O 672-BBGA BGA package surface-mount package 1.2 V core -6 speed grade industrial temperature grade FPGA configuration industrial control system
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں