LFE2-70E-6F672I - 68K LUT ECP2 FPGA | Lattice Semiconductor
料号: LFE2-70E-6F672I ✓ 量产中LFE2-70E-6F672I 概述
An FPGA is a programmable semiconductor in which logic, routing, and I/O behavior are defined after fabrication. Within the product hierarchy, this device is an FPGA, a programmable-logic device, and ultimately a semiconductor. The ECP2 family provides a platform for parallel data processing, control logic, interface bridging, and embedded system integration. Its large user-I/O count makes the 672-ball option useful when a design requires numerous external connections or multiple high-speed interfaces.
The ECP2/M architecture provides 68,000 LUTs and up to 1,032 Kb of embedded block RAM according to the ECP2 family product information. The 500-I/O configuration supports dense board-level connectivity without requiring multiple programmable devices. A 1.2 V core operating voltage reduces power-related stress in suitable system architectures, while the -6 designation identifies the device speed grade. The LFE2-70E-6F672I is identified as an industrial-temperature grade part.
The -6 speed grade is intended for designs that require substantially more timing performance than the slowest ECP2 grades. However, timing closure still depends on the selected clock, I/O standards, routing density, memory usage, and external interface requirements. Because the device contains a large number of programmable resources and I/Os, system-level timing, power, and pin-placement constraints should be evaluated together before a PCB layout is released.
Typical uses include industrial control systems, test and measurement equipment, communications infrastructure, video and display processing, embedded storage controllers, and high-pin-count interface consolidation. The ECP2/M device is particularly relevant where parallel logic, custom protocol handling, or multiple external buses must operate concurrently while retaining field-reprogrammability.
PCB implementation requires careful BGA escape routing, continuous power and ground planes, and compliance with the manufacturer's package and pin-assignment documentation. Differential and high-speed interfaces should use the manufacturer-recommended I/O standards and controlled-impedance routing. Because a 672-ball device is difficult to rework, programming, boundary-scan, and board-level validation should be planned before production quantities are released.
This product page organizes the ECP2/M capacity, package, speed, temperature, and replacement information into an engineer-focused selection guide. It also distinguishes verified drop-in options from changes that require a new pinout, package, device family, or board redesign.
直接替换替代料: LFE2-70E-6F672I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
LFE2-70SE-6F672I
✅ 直接替换📋 参考替代料(不在目录中)
LFE2-70E-8F672I
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
LFE2-70E-4F672I
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
LFE2-70E-6F672C
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →LFE2M50E-6F672I
✅ 直接替换📋 参考替代料(不在目录中)
LFE2-70E-6F672I 最大额定值与电气特性
| Device Type | ECP2/M field-programmable gate array |
| Logic Capacity | 68,000 LUTs |
| User I/O Count | 500 I/O |
| Embedded Block RAM | 1,032 Kb |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -6 |
| Temperature Grade | Industrial |
| 工作温度 | -40 °C to +100 °C junction |
| Package Type | 672-BBGA |
| Package Ball Pitch | 1.0 mm |
| Package Height | 2.6 mm |
| Terminal Count | 672 balls |
| Terminal Form | Ball |
| Package Shape | Square |
| 安装类型 | Surface mount |
| FPGA Configuration | Field programmable |
LFE2-70E-6F672I square 引脚配置指南
LFE2-70E-6F672I(square 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: LFE2-70E-6F672I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LFE2-70E-6F672I 适用于 6 应用s: Industrial PLC and Automation Controller, Test and Measurement Instrumentation, Communications Interface Consolidation, Video and Display Processing, Embedded Storage and Bus Controller, Programmable Logic Upgrade Platform.
Industrial PLC and Automation Controller
LFE2-70E-6F672I fits an industrial programmable-logic controller because its 68,000 LUTs can host sequencing, motion-control, and machine-safety-adjacent logic, while 500 user I/O provide extensive connectivity to sensors and actuators. The -6 speed grade supports timing-sensitive control paths, and the industrial rating of -40 °C to +100 °C junction suits factory equipment. Place the device beside the field-I/O circuitry, connect clean power and ground planes, and reserve the programming interface for configuration, diagnostics, and controlled field updates.
推荐
Test and Measurement Instrumentation
The 500-I/O LFE2-70E-6F672I is useful in automated test equipment where sequencing logic, pattern generation, counters, acquisition control, and instrument-bus arbitration must operate concurrently. Its 68,000 LUTs allow multiple parallel channels to be consolidated in one FPGA, while 1,032 Kb of embedded block RAM supports buffering and local data handling. For high-speed measurement paths, use the manufacturer-defined I/O standards, controlled-impedance routing, and separate analog or sensitive front-end circuitry to prevent digital switching activity from degrading measurement accuracy.
推荐
Communications Interface Consolidation
LFE2-70E-6F672I can consolidate parallel, serial, and packet-oriented interfaces in communications equipment because 500 user I/O leave substantial connectivity for transceivers, status signals, and control paths. The ECP2/M architecture permits custom protocol termination, buffering, and routing without requiring several fixed-function bridge devices. The -6 grade is appropriate for established timing targets, while 1,032 Kb of embedded block RAM can serve packet staging or dual-port buffering. Signal-integrity planning must align every external interface with the exact supported I/O standard and voltage requirements.
推荐
Video and Display Processing
The high-I/O ECP2/M FPGA is suitable for pixel routing, timing generation, frame buffering, and interface conversion in video or display equipment. Its 68,000 LUTs provide parallel processing resources, and 1,032 Kb of block RAM accommodates line buffers or control data without relying entirely on external memory. The 500-I/O configuration simplifies connections among source logic, display timing, and auxiliary control signals. For reliable operation, constrain all pixel-clock paths, use appropriate I/O standards, and place decoupling close to the device's numerous power and ground balls.
推荐
Embedded Storage and Bus Controller
LFE2-70E-6F672I can implement embedded storage controllers, flash-interface logic, data buffers, and command interpreters because the ECP2/M device combines programmable logic with 1,032 Kb of embedded block RAM. Its 500 I/O provide the pins needed for multiple data buses, status signals, and external memories. A single-FPGA implementation reduces inter-device routing and synchronization overhead, but timing closure should be checked for the selected memory interface and command-latency requirements. Use registered I/O and disciplined clocking where protocol timing is critical.
推荐
Programmable Logic Upgrade Platform
LFE2-70E-6F672I provides a useful base for industrial products that need field-updatable logic, protocol adaptation, or lifecycle extension. Its 68,000 LUTs can implement control and interface functions in one device, and its large I/O count can preserve connections to an existing control board during a redesign. Because the 672-BBGA footprint is complex and difficult to rework, prototype programming, boundary-scan access, and power sequencing before volume production. The same-package alternatives can assist continuity planning when their complete timing and temperature requirements are verified.
推荐
推荐产品汇总
工程参考数据: LFE2-70E-6F672I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LFE2-70SE-6F672I | LFE2-70E-8F672I | LFE2-70E-4F672I | LFE2-70E-6F672C |
|---|---|---|---|---|---|
| Brand | Lattice Semiconductor Corporation | Lattice Semiconductor Corporation | Lattice Semiconductor Corporation | Lattice Semiconductor Corporation | Lattice Semiconductor Corporation |
| Package | 672-BBGA | 672-BBGA | 672-BBGA | 672-BBGA | 672-BBGA |
| Device Family | LFE2-70E | LFE2-70SE | LFE2-70E | LFE2-70E | LFE2-70E |
| Logic Capacity | 68,000 LUTs | 68,000 LUTs | 68,000 LUTs | 68,000 LUTs | 68,000 LUTs |
| User I/O | 500 I/O | 500 I/O | 500 I/O | 500 I/O | 500 I/O |
| Core Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | -6 | -6 | -8 | -4 | -6 |
| Temperature Grade | Industrial | Industrial | Industrial | Industrial | Commercial |
| Embedded Block RAM | 1,032 Kb | 1,032 Kb | 1,032 Kb | 1,032 Kb | 1,032 Kb |
关键差异点
- Higher speed grade within the same 672-BBGA ECP2/M configuration (对比 LFE2-70E-4F672I)
- Maintains the required industrial temperature class (对比 LFE2-70E-6F672C)
- Closest identified same-speed, same-package family alternative (对比 LFE2-70SE-6F672I)
设计说明
Use the manufacturer 672-BBGA land pattern and exact ball map rather than a generic 672-ball footprint. The package uses a 1 mm ball pitch, so verify escape-routing clearance, drill and pad dimensions, solder-mask design, and assembly capability before layout release. Preserve direct access to configuration and test pins and place decoupling capacitors close to the corresponding power balls.
Create a continuous, low-impedance power-distribution network with multiple connections to the FPGA's power balls and an uninterrupted ground reference. Follow the manufacturer guidance for core, auxiliary, and I/O supplies, including permitted sequencing and ramp requirements. Estimate maximum dynamic and static current before selecting regulators, then verify the complete power tree across temperature, process, and operating-frequency corners.
Assign high-speed interfaces only to banks with the required I/O standards and voltage levels. Match trace lengths and impedances according to the selected interface, keep clocks away from noisy switching paths, and provide continuous return paths beneath high-speed pairs. Treat the 500-I/O device as a signal-integrity system rather than only a logic-placement problem, especially when several external buses operate concurrently.
Do not infer interchangeability solely from a shared 672-BBGA package, LUT count, or speed suffix. Compare every power ball, configuration pin, I/O standard, clock-capable pin, and timing constraint against the manufacturer package and device documentation. The -4 option can reduce timing margin, the -8 option changes the speed class, and the commercial-temperature option cannot replace an industrial requirement.
Estimate junction temperature from total FPGA dissipation, package thermal resistance, board construction, airflow, and the selected I/O activity level. The dense 672-ball package can require deliberate copper distribution even though it offers many power and ground connections. Validate the assembled board across the industrial temperature range and ensure the enclosure does not trap heat around the device.
合规信息
The industrial temperature grade is not an automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require manufacturer documentation.