onsemi

LM239DG - 3-36V Quad Comparator | onsemi | SOIC-14

MPN: LM239DG ✗ اختتامِ زندگی
3 V to 36 V Vdss 25 nA Id 14-pin SOIC Package
MOQ: 1 |

LM239DG جائزہ

The onsemi LM239DG is a single-supply quad analog comparator with four independent comparison channels, a 3 V to 36 V supply range, and CMOS, open-collector, TTL-compatible outputs in a 14-pin SOIC package. Its 130 mV typical low-output saturation voltage at 4 mA supports straightforward interface with digital logic, while its low 25 nA typical input bias current and ±5 nA typical input offset current help preserve the accuracy of high-impedance sensing circuits.

A quad analog comparator is a multi-channel semiconductor that compares two input voltages and produces a logic-level indication of their relationship. The LM239DG belongs to the comparator hierarchy within analog and mixed-signal integrated circuits, where it is used for voltage thresholding, signal conditioning, and protection functions. Its four channels share one package but operate independently, allowing a compact design to implement several sensing points without using four separate comparator devices.

Key features include four general-purpose comparator elements, single-supply operation from 3 V to 36 V, support for ±1.5 V to ±18 V dual-supply rails, and outputs compatible with CMOS, open-collector, and TTL loads. The typical input offset voltage is listed as no more than 1.3 mV, while the typical input bias current is 25 nA. These characteristics make the device suitable for precision threshold detection where input current must not materially disturb a high-impedance source.

The comparator architecture translates the voltage relationship between each noninverting and inverting input into an open-collector output state. Because the outputs are open collector, external pull-up resistors are required for normal logic-high operation. Each output can sink the stated 130 mV typical saturation voltage at a 4 mA load. This arrangement provides flexible voltage-level adaptation, although pull-up selection, output rise time, and system fanout must be considered during design.

Typical applications include consumer and industrial level detection, low-level sensing, memory-device threshold monitoring, automotive interface circuits, and general-purpose signal conditioning. The four channels can monitor separate sensor lines, compare a control signal against adjustable references, or implement window-detection functions using external resistor networks. The 3 V minimum supply also permits operation from regulated 5 V or 12 V systems, while the 36 V maximum supports higher-voltage industrial rails when the input and output limits permit.

The principal design consideration is protecting every input and output from voltages outside the device ratings, especially during power sequencing. Place the pull-up resistor close to each open-collector output, route sensitive input traces away from switching nodes, and verify logic thresholds against the actual pull-up voltage. A common 14-Pin SOIC footprint also simplifies assembly, but the obsolete lifecycle status requires lifecycle confirmation before committing a new production design.

This product page combines the LM239DG electrical characteristics, package details, replacement analysis, and practical design guidance with direct quotations and procurement requests routed through the XAIPART Request a Quote form. It helps engineers evaluate a legacy comparator without relying on incomplete distributor summaries.

کے لیے ڈراپ اِن متبادل LM239DG — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں LM239DG (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Comparator Type, Package, Output Type, Logic Compatibility, Number of Channels.

Texas Instruments
Comparator Type: Quad precision differential voltage comparator
Output Type: Open-collector
Number of Channels: 4 independent channels
موازنہ کریں LM239DG →
onsemi
Comparator Type: Quad differential comparator
Package: 14-SOIC
Output Type: Open-collector
موازنہ کریں LM239DG →
STMicroelectronics
Comparator Type: 4 independent precision voltage comparators
Package: 14-pin SO
Output Type: Open collector
موازنہ کریں LM239DG →
onsemi
Comparator Type: 4-channel general-purpose analog comparator
Output Type: Open collector
Logic Compatibility: CMOS, TTL, and MOS
موازنہ کریں LM239DG →
Texas Instruments
Comparator Type: General Purpose
Package: SOIC-14
Output Type: Open-Collector
موازنہ کریں LM239DG →

LM239DR

✅ ڈراپ-اِن
Texas Instruments
📦 14-SOIC
Quad precision differential voltage comparator · 4 independent channels · ±15 V or 30 V · Open-collector · 25 nA typical · ±5.0 nA typical · 2 mV maximum for LM239A family variants; LM239DR-specific value not supplied · 1.3 µs typical

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM239DR2G

✅ ڈراپ-اِن
onsemi
📦 14-SOIC
Quad differential comparator · 4 channels · 3 V to 36 V · Open-collector · CMOS and TTL compatible · 5 mV typical · 250 nA typical · 1.3 microseconds typical

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM239DT

✅ ڈراپ-اِن
STMicroelectronics
📦 14-SOIC
4 independent precision voltage comparators · 4 channels · Single supply or split supply · Open collector

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM339DR

✅ ڈراپ-اِن
Texas Instruments
📦 14-SOIC
4 (Quad) · General Purpose · Open-Collector · 2 V to 36 V · ±1 V to ±18 V · 5 mV · 25 nA · 5 nA

✓ اسٹاک میں

$0.0738 / یونٹ

ڈیٹا شیٹ دیکھیں →

LM239DG زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Comparator Type General-purpose differential comparator
Number of Elements 4 comparators
Supply Voltage Range 3 V to 36 V
Dual-Supply Voltage Range -18 V to +18 V
آؤٹ پٹ کی قسم Open collector with CMOS, open-collector, and TTL compatibility
Typical Low Output Saturation Voltage 130 mV at 4 mA
Typical Input Bias Current 25 nA
Typical Input Offset Current +/-5 nA
Maximum Input Offset Voltage 1.3 mV
آپریٹنگ درجہ حرارت رینج -25 C to +85 C
پیکیج 14-pin SOIC
Package Width 3.90 mm
Lead Pitch 0.154 mm
Supply Configuration Single supply or dual supply
ماؤنٹنگ ٹائپ Surface mount

LM239DG پن کنفیگریشن

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
پن 1 OUT1 — Comparator 1 open-collector output
پن 2 IN1- — Comparator 1 inverting input
پن 3 IN1+ — Comparator 1 noninverting input
پن 4 GND — Ground connection
پن 5 IN2+ — Comparator 2 noninverting input
پن 6 IN2- — Comparator 2 inverting input
پن 7 OUT2 — Comparator 2 open-collector output
پن 8 OUT3 — Comparator 3 open-collector output
پن 9 IN3- — Comparator 3 inverting input
پن 10 IN3+ — Comparator 3 noninverting input
پن 11 VCC — Positive supply connection
پن 12 IN4+ — Comparator 4 noninverting input
پن 13 IN4- — Comparator 4 inverting input
پن 14 OUT4 — Comparator 4 open-collector output

عام استعمالات

LM239DG کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Level Detection, Low-Level Sensing, Memory Threshold Monitoring, Automotive Interface Circuits, Consumer Equipment Thresholding, Sensor Signal Conditioning.

🏭

Industrial Level Detection

The LM239DG fits industrial level-detection circuits because four independent channels can compare sensor voltages against reference levels within a 3 V to 36 V supply environment. Its maximum input offset voltage of 1.3 mV and typical input bias current of 25 nA help limit threshold errors when the sensed signal has a high source impedance. Each open-collector output can drive a pull-up and an alarm or PLC input, with a listed typical saturation voltage of 130 mV at 4 mA. The main design consideration is selecting pull-up values that satisfy the receiving logic while maintaining acceptable switching speed.

🧩

Low-Level Sensing

The LM239DG is suitable for low-level sensing when the signal source is sensitive to input bias current. Its 25 nA typical input bias current, +/-5 nA typical input offset current, and 1.3 mV maximum input offset voltage support decisions close to the reference voltage without adding substantial load to the sensor. The four channels allow multiple thresholds to be monitored in one package. Use low-leakage pull-up resistors where slow transitions could be caused by board contamination, and confirm the common-mode limits of every input during startup and fault conditions.

🖥️

Memory Threshold Monitoring

The LM239DG supports memory and logic threshold monitoring because four comparator channels can detect separate voltage thresholds on data, address, or control signals. The 3 V minimum supply permits operation from common 5 V rails, while the 36 V maximum rating provides additional headroom for industrial systems. Its open-collector outputs can drive wired logic with suitable pull-ups, and the 130 mV typical saturation voltage at 4 mA provides a defined low output level. Designers should verify signal levels, input common-mode range, and power-sequencing behavior before connecting the device to powered memory circuits.

🚗

Automotive Interface Circuits

The LM239DG can support interface and protection functions in automotive-style circuits that compare sensed voltages against fixed or adjustable thresholds. Its single-supply range of 3 V to 36 V covers many 12 V-system signal-conditioning needs, while four channels consolidate multiple comparisons into one 14-pin SOIC package. The device's -25 C to +85 C listed temperature range should be checked against the vehicle's environmental requirements. For new safety-related automotive programs, use a part with the required automotive qualification rather than relying on a general-purpose legacy comparator.

📱

Consumer Equipment Thresholding

The LM239DG is appropriate for consumer-equipment thresholding when several analog signals must be converted into digital decisions. Four general-purpose comparators provide independent level checks in a compact 14-pin SOIC package, and the open-collector outputs allow the logic threshold to be established through pull-up resistors. The device can operate from 5 V and 12 V supplies, with a 36 V maximum rating that adds design margin for selected rails. Design the pull-up network for the actual logic family and pay attention to open-collector rise time, particularly when switching repeated signals at high frequency.

🧩

Sensor Signal Conditioning

The LM239DG can condition signals from resistive, capacitive, or bridge-based sensors by comparing the sensed voltage with a reference. Its low 25 nA typical input bias current reduces loading on high-impedance sensors, while the 1.3 mV maximum input offset voltage defines an important threshold-error boundary. The four-channel arrangement supports multiple sensor nodes or a combination of sensor and warning thresholds. Keep sensitive input traces short and isolated from switching nodes, and account for input offset, reference tolerance, temperature drift, and comparator hysteresis during precision measurements.

What are the key specifications of LM239DG that engineers should know?
The LM239DG is a single-supply quad analog comparator operating from 3 V to 36 V and packaged in a 14-pin SOIC. Its four open-collector outputs are compatible with CMOS, open-collector, and TTL logic. Important performance figures include 130 mV typical low-output saturation voltage at 4 mA, 25 nA typical input bias current, +/-5 nA typical input offset current, and a maximum input offset voltage of 1.3 mV. According to the onsemi LM239 datasheet, these characteristics support general-purpose level detection, low-level sensing, and memory applications.
Where can I download the LM239DG datasheet PDF?
The LM239DG datasheet PDF can be accessed through the listed manufacturer-datasheet download or the onsemi product documentation. The document is a 10-page datasheet for a single-supply quad comparator and includes electrical characteristics, pin information, and application details. For design work, use the pin-description table in the onsemi LM239 datasheet when assigning PCB tracks, and compare the ordering suffix carefully because the LM239DG has an obsolete lifecycle status. The direct PDF reference on this page is provided for engineering review.
Where can I find the LM239DG pinout?
The LM239DG pinout is shown in the onsemi LM239 datasheet and follows the standard 14-pin SOIC comparator arrangement. Pins 1 and 14 are the outputs of comparator channels 1 and 4, pins 2, 3, 12, and 13 are the corresponding inverting and noninverting inputs, pin 8 is the third-channel output, pins 9 and 10 are the third-channel inputs, pin 11 is VCC, pin 7 is the second-channel output, pins 5 and 6 are the second-channel inputs, and pin 4 is ground. Use the numbered package drawing when assigning tracks.
Is the LM239DG still active?
No, the LM239DG is identified as obsolete, while related onsemi LM239DR and LM239DR2G options are listed as active replacements. The obsolete status means that a new design should not be based on the DG ordering code without first confirming availability and lifecycle support. The onsemi LM239 family documentation should be used to compare the exact suffix, package form, and production conditions. For quotation, MOQ, and current availability, use the Request a Quote form on this page rather than relying on a historical listing state.
What is the operating voltage range of the LM239DG?
The LM239DG operates from 3 V to 36 V as a single-supply device and also supports balanced dual supplies from -1.5 V to +18 V, equivalent to +/-18 V overall. This broad range allows the comparators to operate from conventional 5 V and 12 V rails as well as higher-voltage industrial systems. The onsemi LM239 datasheet identifies the device as a single-supply quad comparator, while the ordering information also describes dual-supply use. Each input and output must remain within the corresponding absolute-maximum and common-mode limits.
How does the LM239DG open-collector output work?
The LM239DG output is an open-collector transistor that pulls the output node toward ground when the comparison result requires a low state, while an external pull-up resistor creates the logic-high state. The datasheet lists a typical low-output saturation voltage of 130 mV at 4 mA. Choose the pull-up voltage to satisfy the driven logic family, and confirm that its resistance provides adequate sink current while keeping the rising edge within the receiving circuit's timing requirements. Each of the four output channels requires its own pull-up arrangement.
What can replace the LM239DG?
The onsemi LM239DR and LM239DR2G are the closest listed replacements for the obsolete LM239DG because they retain the four-channel SOIC comparator architecture and are identified as active replacements. The LM239DT is another same-family SOIC option, although its ordering form differs from LM239DG. Confirm pin assignment, electrical limits, temperature range, and required orderable suffix before substitution. Use the Request a Quote form on this page when current availability, MOQ, or production status must be confirmed.
Is LM239DG the same as LM239DR?
No, LM239DG and LM239DR are related onsemi LM239 ordering codes rather than identical suffixes, and LM239DR is listed as an active replacement for the obsolete LM239DG. Both use the 14-pin SOIC device family, so the footprint remains practical for board reuse, but the suffix can encode manufacturing, packaging, and lifecycle conditions. Check the manufacturer ordering table for the exact temperature, package, and compliance attributes. Also verify output behavior, supply range, and input limits before approving the substitution.
When should I choose LM239DG over LM239DR?
Choose LM239DG only when an existing design specifically requires that ordering code and an authorized lifecycle confirmation supports continued use. For new production, LM239DR is generally the more practical onsemi choice because it is listed as an active replacement and retains the same 14-channel-package form used by the LM239 family. The decision should not be based on suffix similarity alone; verify the exact electrical characteristics, temperature grade, package dimensions, and procurement status. The Request a Quote form can provide current commercial confirmation.
What is the best onsemi equivalent for LM239DG?
The LM239DR is the best-supported onsemi equivalent for a new LM239DG-based design because it is explicitly identified as an active replacement and belongs to the same quad-comparator family. LM239DR2G is another listed active replacement, while LM239DT may require closer review of ordering and packaging conditions. All use the 14-pin SOIC architecture, but engineers should still compare electrical limits, temperature coverage, and suffix-specific production details in the onsemi LM239 datasheet before committing a design.
LM239DG vs LM239DR: which is better for a new design?
LM239DR is the better candidate for a new production design because the obsolete LM239DG has limited lifecycle assurance and LM239DR is listed as an active replacement. Both parts belong to the same onsemi LM239 quad-comparator family and use a 14-pin SOIC package, which simplifies PCB reuse. Confirm that the replacement's suffix-specific temperature, compliance, and orderable attributes meet the original requirements. The obsolete part may still be appropriate when maintaining an already qualified assembly, subject to a formal lifecycle review.
Where to buy LM239DG online?
Use the Request a Quote form on this page to request LM239DG availability, MOQ, and orderable quantity. The target has an obsolete lifecycle status, so a listing alone does not guarantee current production supply or traceability. Specify the required package, temperature range, and inspection requirements in the request, and request a lifecycle statement with the quotation. Do not approve a new design around the LM239DG ordering code without confirming that the manufacturer can support the required volume and date.
What is the price of LM239DG?
Current LM239DG commercial terms should be requested through the Request a Quote form on this page because the part is obsolete and its availability may be constrained. The quotation should state the exact onsemi ordering code, quantity, inspection level, packaging form, and requested delivery date. Historical or marketplace prices do not represent a firm allocation, so they should not be used as a production budget. If the design is new, request lifecycle confirmation and consider LM239DR as the listed active replacement.
What is the lead time for LM239DG?
Request the current lead time through the Request a Quote form on this page. Lead time for an obsolete part depends on remaining factory inventory, lot traceability, order quantity, and whether the manufacturer will schedule a last-time buy. State the required shipment date and annual usage so the supplier can confirm the applicable supply condition. If the requirement is a new production program rather than maintenance of an existing assembly, request an LM239DR quote and an LM239DG lifecycle statement in parallel.
Is LM239DG in stock?
Stock for LM239DG should be confirmed through the Request a Quote form on this page rather than inferred from an active product listing. The obsolete lifecycle status means that inventory can be limited or tied to remaining factory stock even when a marketplace page remains accessible. Provide the required quantity and target date in the request, and request lot, date-code, and traceability information where needed. For ongoing new production, the listed active onsemi replacement LM239DR should also be evaluated.

کے لیے انجینئرنگ ریفرنس ڈیٹا LM239DG — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose LM239DG when maintaining an existing qualified assembly specifically requires the onsemi LM239DG ordering code and lifecycle support can be confirmed. Its four channels, 3-36 V supply range, open-collector outputs, and 14-pin SOIC package suit level detection, low-level sensing, and memory threshold monitoring. For new production, choose LM239DR because it is listed as an active onsemi replacement with the same 14-pin footprint and listed electrical ratings. LM239DR2G is another active replacement option, while LM239DT requires closer review of suffix-specific ordering and packaging conditions. Consider LM339DR when a Texas Instruments sourcing path is preferred, but verify its input offset, bias current, saturation voltage, temperature range, and lifecycle against the original design. For every replacement, review the manufacturer datasheet, confirm the common-mode range, and check pull-up-resistor requirements before PCB release.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ LM239DR LM239DR2G LM239DT LM339DR
Brand onsemi onsemi onsemi onsemi Texas Instruments
Package 14-SOIC 14-SOIC - same footprint 14-SOIC - same footprint 14-SOIC - same footprint 14-SOIC - same footprint
Comparator Count 4 4 4 4 4

اہم امتیازی خصوصیات

  • Direct onsemi replacement path within the same SOIC footprint (بمقابلہLM239DR)
  • Four-channel integration reduces component count (بمقابلہLM339DR)
  • Low input bias supports higher-impedance sensing (بمقابلہLM239DT)

ڈیزائن نوٹس

Treat every open-collector output as requiring an external pull-up resistor. The LM239DG can sink current to a listed 130 mV typical saturation voltage at 4 mA, but the resistor must still satisfy the input's high-level voltage and leakage requirements. Avoid allowing the output node to float. Also verify that all input and output voltages remain within their absolute-maximum limits during power-up and power-down, especially in circuits where a 36 V rail can remain present while the comparator supply is off.

Route the four comparator input pairs away from switching nodes, relay contacts, inductors, and high-current return paths. Keep the common ground connection short and use a stable ground reference because the comparator evaluates small voltage differences. If the sensed source is high impedance, minimize leakage from board contamination and choose the external reference network accordingly. Place any input filtering capacitors where they will not slow the intended comparison or create unwanted delay when the input crosses the threshold.

The 1.3 mV maximum input offset voltage, 25 nA typical input bias current, and +/-5 nA typical input offset current are central to threshold accuracy. Include comparator offset, reference tolerance, resistor tolerance, temperature drift, and any intentional hysteresis in the system error budget. For slowly changing signals, add positive feedback for hysteresis to prevent output chatter. The open-collector rise time is controlled by the pull-up resistance and total node capacitance, so select a value that balances noise immunity against required switching speed.

Before starting a new design, obtain a lifecycle statement for LM239DG and compare the active LM239DR ordering option. The shared 14-pin SOIC footprint supports PCB reuse, but suffix-specific temperature, packaging, qualification, and orderable attributes must be confirmed. Do not infer automotive qualification or full RoHS or REACH coverage from the family name. For obsolete assemblies, record the last-time-buy opportunity, remaining lot traceability, and date-code requirements before requesting any remaining supply.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The LM239DG is listed for consumer, automotive, and industrial applications, but no specific AEC-Q100 qualification or RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

lm239 datasheet lm239 pdf LM239DG datasheet LM239DG pinout LM239DG specifications LM239DG SOIC-14 LM239DG replacement LM239DG equivalent LM239DG vs LM239DR LM239DG drop-in replacement onsemi LM239DG LM239DG price LM239DG stock LM239DG level detection LM239DG low-level sensing

متعلقہ اجزاء اور اصطلاحات

onsemi LM239DG LM239DR LM239DR2G LM239DT LM339DR Texas Instruments quad analog comparator comparator IC analog integrated circuit semiconductor single-supply comparator open-collector output CMOS-compatible output TTL-compatible output input offset voltage input bias current low output saturation voltage level detection low-level sensing memory threshold monitoring 14-pin SOIC SOIC package family surface-mount package RoHS REACH
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں