Texas Instruments

LM2902KAVQDRG4 - 30V Quad Op Amp | Texas Instruments

MPN: LM2902KAVQDRG4 ✓ فعال
3 V to 30 V Vdss 14-SOIC Package
MOQ: 1 |

LM2902KAVQDRG4 جائزہ

The Texas Instruments LM2902KAVQDRG4 is a four-channel, general-purpose operational amplifier designed for single-supply or split-supply operation, with a 3 V to 30 V supply range, 1.2 MHz gain-bandwidth product, 2 mV input offset voltage, and 0.5 V/µs slew rate in a 14-pin SOIC package. The device provides four independent, internally compensated amplifiers for signal conditioning, buffering, and analog control applications.

An operational amplifier is a high-gain analog building block that compares its inverting and non-inverting inputs and drives its output toward the voltage required to reduce the difference between them. The LM2902 belongs to the operational-amplifier hierarchy within amplifier ICs, analog signal-processing ICs, and semiconductor components. Its four independent channels allow multiple analog functions to be implemented in one package, reducing board area and simplifying component inventory.

Key characteristics include a 1.2 MHz gain-bandwidth product for moderate-frequency signal processing, a 0.5 V/µs slew rate for changing output waveforms, and a 2 mV input offset voltage. The manufacturer identifies the automotive-qualified LM2902KAV family with improved ESD protection of 2 kV. These characteristics make the amplifier suitable for industrial controls, automotive electronics, sensor interfaces, power-supply control loops, and general-purpose analog signal conditioning.

The four amplifiers are frequency compensated and intended for operation from a single supply or split supplies. This allows the same device to process signals referenced to ground or signals centered around a midpoint created by two supply rails. Independent channels can perform amplification, filtering, comparisons, level shifting, current-voltage conversion, or feedback functions without coupling between the amplifiers, provided each channel respects the common supply and grounding limits.

Typical applications include conditioning resistive sensor signals, buffering outputs from transducers, amplifying low-frequency control signals, supporting feedback networks in power converters, driving analog inputs in industrial equipment, and implementing multiple amplifier channels in automotive electronic modules. The 30 V supply capability provides useful headroom for industrial and automotive environments, while the 14-pin SOIC package supports conventional surface-mount assembly and inspection.

When laying out a circuit, keep each input and feedback path short, connect bypassing capacitors close to the supply pins, and route return currents without sharing narrow paths with sensitive signals. Confirm output swing, input common-mode range, stability, and thermal conditions for the intended supply voltage before using the device in a new design. The manufacturer datasheet remains the controlling reference for limits and test conditions.

This product page combines the exact ordering information, key electrical characteristics, package details, application guidance, design notes, and qualified drop-in alternatives for LM2902KAVQDRG4. It also distinguishes automotive-qualified choices from electrically similar family members so engineers can make a replacement decision without treating every similar quad amplifier as automatically interchangeable.

کے لیے ڈراپ اِن متبادل LM2902KAVQDRG4 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں LM2902KAVQDRG4 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Amplifier Type, Number of Amplifier Channels.

Texas Instruments
Number of Amplifier Channels: 4
موازنہ کریں LM2902KAVQDRG4 →
Texas Instruments
Amplifier Type: General purpose
موازنہ کریں LM2902KAVQDRG4 →

LM2902KVQDRQ1

✅ ڈراپ-اِن
Texas Instruments
📦 14-SOIC
4 channels · 26 V · 1.2 MHz · 2 mV · 80 dB · 0.5 V/µs · -0.5 µA · -55 °C to +125 °C

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2902DR

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
Texas Instruments
📦 14-SOIC
Quad operational amplifier · 4 · 26 V · 1.2 MHz · 2 mV · Single supply or split supply · Push-pull

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2902KAVQDRG4 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Number of Amplifier Channels 4 channels
Supply Voltage Range 3 V to 30 V
Gain-Bandwidth Product 1.2 MHz
Input Offset Voltage 2 mV
Slew Rate 0.5 V/µs
Improved ESD Protection 2 kV
Automotive Qualification AEC-Q100 qualified
پیکیج 14-SOIC
پن کی تعداد 14 pins
ماؤنٹنگ ٹائپ Surface mount
Amplifier Type General-purpose operational amplifier
Number of Independent Channels 4 independent channels
Compensation Internally compensated
Supply Configuration Single supply or split supply

LM2902KAVQDRG4 پن کنفیگریشن

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
پن 1 OUT1 — Amplifier 1 output
پن 2 IN1- — Amplifier 1 inverting input
پن 3 IN1+ — Amplifier 1 non-inverting input
پن 4 V- — Negative supply connection
پن 5 IN2+ — Amplifier 2 non-inverting input
پن 6 IN2- — Amplifier 2 inverting input
پن 7 OUT2 — Amplifier 2 output
پن 8 OUT3 — Amplifier 3 output
پن 9 IN3- — Amplifier 3 inverting input
پن 10 IN3+ — Amplifier 3 non-inverting input
پن 11 V+ — Positive supply connection
پن 12 IN4- — Amplifier 4 inverting input
پن 13 IN4+ — Amplifier 4 non-inverting input
پن 14 OUT4 — Amplifier 4 output

عام استعمالات

LM2902KAVQDRG4 کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive Sensor Conditioning, Industrial Control Signal Conditioning, Power-Supply Feedback Control, Data Acquisition and Buffering, Audio and Communication Interface Buffers, Embedded Control Analog Front Ends.

🚗

Automotive Sensor Conditioning

The LM2902KAVQDRG4 fits automotive sensor interfaces that require several low-frequency analog channels on one board. Its four independent amplifiers can buffer resistive sensors, amplify strain-gauge or position-sensor outputs, and provide active filtering without adding separate amplifier packages. The 3 V to 30 V operating range provides useful supply flexibility, while 2 kV improved ESD protection and AEC-Q100 qualification strengthen its suitability for qualified automotive electronics. The 1.2 MHz gain-bandwidth product handles general-purpose control signals rather than high-frequency waveform tasks, and the 2 mV input offset should be included in the worst-case error budget for precision sensing.

🏭

Industrial Control Signal Conditioning

The LM2902KAVQDRG4 is appropriate for industrial control modules that combine sensor acquisition, reference buffering, and error-amplifier functions. Its four independent channels reduce component count while supporting a 3 V to 30 V supply range for common industrial rails. A 1.2 MHz gain-bandwidth product supports low-bandwidth process-control signals, and the 0.5 V/µs slew rate provides adequate response for gradual setpoint changes. The 2 mV offset becomes important when the amplifier performs the final stage of high-gain sensing, so designers should include it in the system error budget and verify common-mode behavior near the selected supply rails.

⚡

Power-Supply Feedback Control

The LM2902KAVQDRG4 can implement error amplifiers, current-sense amplifiers, and feedback paths in loosely regulated linear or switching power systems. Its 30 V maximum supply is useful for higher-voltage industrial power stages, while the 0.5 V/µs slew rate allows the output to respond to loop compensation transients. Four independent channels can also support auxiliary pre regulation, current monitoring, and output buffering. Because compensation and stability depend on the power-stage topology, capacitor values, load, and ESR, use the manufacturer application guidance and verify the complete loop rather than treating the amplifier as a standalone block.

🖥️

Data Acquisition and Buffering

The LM2902KAVQDRG4 can buffer inputs to analog-to-digital converters or multiplexers in moderate-speed measurement systems. Its four channels allow simultaneous or sequential conditioning of several sensor outputs, and the 1.2 MHz gain-bandwidth product supports signals well beyond conventional DC-only instrumentation. The 2 mV input offset is significant when the acquisition chain requires high DC accuracy, while the 0.5 V/µs slew rate helps preserve large-signal steps into capacitive sampling inputs. Use the amplifier primarily for low-to-moderate bandwidth signals, and verify settling behavior, output drive, and noise against the converter requirements.

🎧

Audio and Communication Interface Buffers

The LM2902KAVQDRG4 can provide impedance buffering and modest gain stages for low-frequency communication or audio interface circuits. Its 1.2 MHz bandwidth and 0.5 V/µs slew rate are suitable for general-purpose tone and control paths, while the quad configuration allows separate handling of microphone-level, line-level, and auxiliary signals. The device is not positioned as a high-performance low-noise audio amplifier, so the 2 mV offset and other noise-related limits must be checked against the signal chain. For demanding audio applications, use the manufacturer datasheet to determine whether the selected LM2902KAV configuration meets the required noise, distortion, and frequency-response targets.

🧩

Embedded Control Analog Front Ends

The LM2902KAVQDRG4 can provide four analog channels around an embedded controller for actuator feedback, analog monitoring, and signal conditioning. Its 2 mV input offset supports general-purpose monitoring rather than precision metrology, and the 1.2 MHz bandwidth accommodates common embedded-control bandwidths. The 3 V lower supply limit permits use with 3.3 V systems, while operation up to 30 V covers higher-voltage interfaces when the connected signals remain within the input common-mode range. Designers should use separate, well-planned grounding, place bypass capacitance near the device, and isolate analog paths from switching nodes to avoid converting digital activity into coupled amplifier errors.

What is the operating voltage range of LM2902KAVQDRG4?
The LM2902KAVQDRG4 operates from 3 V to 30 V, allowing it to serve both conventional low-voltage analog systems and higher-voltage industrial or automotive circuits. According to the Texas Instruments LM2902KAV product page, the device also supports single-supply and split-supply operation. Actual usable input and output ranges remain subject to the common-mode and output-swing limits stated in the manufacturer datasheet.
What are the key specifications of LM2902KAVQDRG4 that engineers should know?
The LM2902KAVQDRG4 combines four independent channels with a 3 V to 30 V supply range, 1.2 MHz gain-bandwidth product, 2 mV input offset voltage, 0.5 V/µs slew rate, and 2 kV ESD protection. According to the Texas Instruments product page, this is an automotive-qualified general-purpose quad operational amplifier in a 14-SOIC package. These figures establish its suitability for moderate-bandwidth signal conditioning, buffering, and control applications.
Where can I download the LM2902KAVQDRG4 datasheet PDF?
The LM2902KAVQDRG4 datasheet PDF is available through the manufacturer product page at https://www.ti.com/product/LM2902KAV, with a direct document link also published at https://pdf.digi-electronics.com/pdf/2579/LM2902KAVQDRG4-datasheet.pdf. The datasheet is the controlling reference for pin assignments, electrical limits, test conditions, ESD ratings, qualification information, and recommended application circuits.
Where can I find the LM2902KAVQDRG4 pinout?
The LM2902KAVQDRG4 uses a 14-SOIC package with four conventional single operational-amplifier channels. Pin 1 is amplifier 1 output, pins 2 and 3 are its inverting and non-inverting inputs, and the sequence repeats for channels 2, 3, and 4 around the package. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks and confirming the exposed package orientation.
What can replace LM2902KAVQDRG4?
The closest supported drop-in choice is the Texas Instruments LM2902KVQDR, which uses the same 14-SOIC footprint and belongs to the same LM2902KAV family. It is the appropriate replacement when the required family features, qualification status, and ordering details remain acceptable. Before substitution, verify the exact pinout, supply limits, offset, bandwidth, ESD rating, and automotive qualification requirements against the manufacturer datasheet.
Is LM2902KAVQDRG4 suitable for automotive applications?
Yes, the LM2902KAVQDRG4 is identified as AEC-Q100 qualified for automotive applications. According to the LM2902KAV family documentation, it also provides improved ESD protection of 2 kV. Automotive use still requires the finished system to satisfy its applicable qualification, environmental, traceability, and production-control requirements beyond the individual amplifier qualification.
LM2902KAVQDRG4 vs LM2902KVQDR: which is better?
LM2902KAVQDRG4 and LM2902KVQDR are closely related 14-SOIC quad amplifiers, so the better choice depends on the required ordering configuration and exact LM2902KAV family characteristics. The target G4 ordering code identifies the LM2902KAV configuration, while LM2902KVQDR is a distinct qualified ordering option. Review the TI product page and datasheet before treating either part as interchangeable.
Can LM2902KAVQDRG4 operate from a single 5 V supply?
The LM2902KAVQDRG4 supports a 3 V to 30 V supply range, so a 5 V single supply is within its stated operating supply span. Signal amplitudes must also remain inside the input common-mode range, and the output must remain inside the specified swing at the selected load and supply. Verify those operating conditions in the manufacturer datasheet when using the amplifier near either supply rail.
When should I choose LM2902KAVQDRG4 over a general-purpose quad op amp?
Choose LM2902KAVQDRG4 when the design needs a 14-SOIC quad amplifier, a 3 V to 30 V supply range, 1.2 MHz bandwidth, 2 kV ESD protection, and automotive qualification. A generic quad amplifier may be appropriate elsewhere, but it should not be selected solely from channel count. Confirm the exact footprint, input/output limits, stability, and qualification requirements first.
Is LM2902KAVQDRG4 suitable for sensor signal conditioning?
The LM2902KAVQDRG4 is suitable for many low-frequency sensor-conditioning stages because it provides four independent channels, 2 mV input offset voltage, 1.2 MHz gain-bandwidth product, and 0.5 V/µs slew rate. Its 30 V maximum supply supports industrial sensor interfaces. Choose resistor and capacitor values against the noise, bias-current, common-mode, and output-swing limits in the manufacturer datasheet.
What is the best Texas Instruments equivalent for LM2902KAVQDRG4?
The Texas Instruments LM2902KVQDR is the closest drop-in family alternative identified for the LM2902KAVQDRG4 because it uses the same 14-SOIC package. The parts share the same underlying family naming, but the exact ordering codes encode configuration and qualification details. Confirm the manufacturer comparison information, pin compatibility, and electrical requirements before approving the replacement.
Where can I buy LM2902KAVQDRG4 and check its lead time?
Use the Request a Quote form on this page to ask about LM2902KAVQDRG4 availability, current lead time, and order quantities. The part is identified by Texas Instruments as the G4 ordering configuration in a 14-SOIC package. A quotation request allows the buyer to confirm packaging, production status, and delivery timing for the intended order.
What is the price of LM2902KAVQDRG4?
Submit a Request a Quote request on this page for the current commercial terms for LM2902KAVQDRG4. The final quotation depends on order quantity, package format, delivery date, and supply status. Use the form rather than relying on an old distributor listing, since availability and commercial terms can change without notice.
Is LM2902KAVQDRG4 in stock?
Request a stock confirmation through the Request a Quote form on this page for LM2902KAVQDRG4. The G4 suffix identifies the Texas Instruments ordering configuration, while actual stock can vary by package, quantity, and delivery schedule. A direct quotation request provides a current answer for the quantity and date required by the project.
How should LM2902KAVQDRG4 be laid out on a PCB?
Place the 14-SOIC on the board with its pin-1 orientation matching the footprint, route each non-inverting, inverting, and feedback connection directly to its intended amplifier channel, and connect supply bypassing close to the package power pins. Keep sensitive input and feedback traces short and away from high-current switching paths. Follow the decoupling and layout guidance in the manufacturer datasheet.

کے لیے انجینئرنگ ریفرنس ڈیٹا LM2902KAVQDRG4 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose LM2902KAVQDRG4 for a 14-SOIC design that requires four independent general-purpose amplifier channels, a 3 V to 30 V operating range, automotive qualification, and the LM2902KAV family's 2 kV improved ESD protection. LM2902KVQDR is the closest same-package family alternative when its specific ordering configuration satisfies the qualification and procurement requirements. Consider LM2902DR only when the board does not require the automotive-qualified LM2902KAV configuration and the full electrical and ESD requirements are verified. For all choices, confirm the 14-SOIC footprint, common-mode range, output swing, stability, offset budget, and supply limitations against the manufacturer datasheet before releasing a PCB.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ LM2902KVQDR LM2902DR
Package 14-SOIC 14-SOIC 14-SOIC
Brand Texas Instruments Texas Instruments Texas Instruments
Number of Channels 4 independent channels 4 independent channels 4 independent channels
Gain-Bandwidth Product 1.2 MHz 1.2 MHz 1.2 MHz
Input Offset Voltage 2 mV 2 mV 2 mV

اہم امتیازی خصوصیات

  • Improved ESD protection within the LM2902KAV family (بمقابلہLM2902DR)
  • Automotive-qualified family configuration (بمقابلہLM2902DR)
  • Wide supply operation in a compact quad package (بمقابلہLM2902KVQDR)

ڈیزائن نوٹس

Place the input, feedback, and bypass components close to their associated LM2902KAVQDRG4 pins. Keep each amplifier channel's non-inverting and inverting routes short, and connect the bypass capacitor directly between the supply pins and ground rather than routing it around the board. In split-supply systems, provide adequate bypassing for both rails because negative supply transients can disturb otherwise correct operation.

Do not select the amplifier only from its 30 V supply rating. Check that every input remains within the common-mode range, that the required output swing is achievable at the chosen load, and that the selected gain is stable with the feedback network. The 2 mV input offset can dominate a high-gain sensor path, while the 1.2 MHz bandwidth limits closed-loop response at high frequencies.

Separate sensitive amplifier inputs from high-current switching nodes and high-impedance bias paths. Use a compact ground-return arrangement around each amplifier, avoid sharing narrow return paths between analog channels and digital loads, and place any protection or filtering components where they do not add unnecessary loop area. These practices reduce coupling of switching energy and ground movement into the input offset and output of the amplifier.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The LM2902KAV family is identified as AEC-Q100 qualified for automotive applications. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or supply-chain documentation.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-09 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

LM2902KAVQDRG4 datasheet LM2902KAVQDRG4 pinout LM2902KAVQDRG4 datasheet pdf LM2902KAVQDRG4 specifications Texas Instruments LM2902KAVQDRG4 LM2902KAVQDRG4 equivalent LM2902KAVQDRG4 replacement LM2902KAVQDRG4 vs LM2902KVQDR LM2902KAVQDRG4 14-SOIC LM2902KAVQDRG4 automotive amplifier LM2902KAVQDRG4 sensor signal conditioning LM2902KAVQDRG4 price LM2902KAVQDRG4 stock What is LM2902KAVQDRG4? LM2902KAVQDRG4 application circuit

متعلقہ اجزاء اور اصطلاحات

Texas Instruments LM2902KAVQDRG4 LM2902KVQDR LM2902DR LM2902KAV LM2902 quad operational amplifier general-purpose operational amplifier amplifier IC analog signal-processing IC semiconductor single-supply operation split-supply operation gain-bandwidth product input offset voltage slew rate ESD protection AEC-Q100 automotive electronics 14-SOIC SOIC package family surface-mount package sensor signal conditioning industrial control power-supply feedback control
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں