Texas Instruments

LM2902KAVQDRG4Q1 - Quad 26V Op Amp | Texas Instruments

MPN: LM2902KAVQDRG4Q1 ✓ فعال
26 V Vdss 14-pin SOIC Package
MOQ: 1 |

LM2902KAVQDRG4Q1 جائزہ

The Texas Instruments LM2902KAVQDRG4Q1 is a four-circuit operational amplifier in a 14-pin SOIC package, with a maximum supply voltage of 26 V, 1.2 MHz gain-bandwidth product, and 2 mV offset voltage. The device is AEC-Q100 qualified for automotive applications and supports operation from -55°C to 125°C.

An operational amplifier, commonly called an op amp, is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The LM2902KAVQDRG4Q1 belongs to the operational amplifier hierarchy: amplifier IC, analog amplifier, voltage-feedback operational amplifier, and power-management-adjacent signal-conditioning IC. Four independent amplifiers are integrated into one package, allowing a circuit to use several gain stages, buffers, filters, or comparators without requiring four separate packages.

Key characteristics include a 1.2 MHz gain-bandwidth product, 2 mV nominal offset voltage, 80 dB common-mode rejection, and a slew rate of 0.5 V/µs. According to the Texas Instruments LM2902KAV product information, the family is stable at unity gain and does not exhibit phase reversal under overdrive conditions. These characteristics suit general-purpose signal conditioning, low-to-moderate-frequency analog processing, sensor interfaces, and industrial or automotive control systems.

The quad amplifier uses a conventional 14-pin SOIC arrangement, with separate input and output pins for four amplifiers and shared power connections. Its wide supply-voltage capability provides headroom for industrial and automotive systems, while the 1.2 MHz bandwidth favors stable, conventional feedback designs rather than demanding high-speed signal-path applications. Unity-gain stability also permits direct buffering without adding a compensation network.

Typical uses include transducer-signal conditioning, current-loop receivers, analog sensor amplification, active filtering, DC motor-control support circuits, and general-purpose automotive electronics. In an instrumentation application, the amplifier can convert a small sensor voltage into a larger voltage suitable for an ADC. In a filter, its bandwidth and slew rate determine the achievable signal rate and response.

Designers should verify input common-mode range, output swing, load capacitance, and stability for each concrete circuit. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels should be configured according to the manufacturer recommendations rather than left floating. The automotive qualification makes this orderable variant appropriate for harsh-temperature electronics when its specified operating limits are respected.

کے لیے ڈراپ اِن متبادل LM2902KAVQDRG4Q1 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں LM2902KAVQDRG4Q1 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Operating Temperature Range, Slew Rate, Amplifier Type, Number of Amplifier Channels, Package Type.

Texas Instruments
Number of Amplifier Channels: 4
موازنہ کریں LM2902KAVQDRG4Q1 →
onsemi
Slew Rate: 0.6 V/µs
Number of Amplifier Channels: 4 channels
Package Type: SOIC-14
موازنہ کریں LM2902KAVQDRG4Q1 →
Texas Instruments
Operating Temperature Range: -40 °C to +125 °C
Amplifier Type: General-purpose operational amplifier
Number of Amplifier Channels: 4 circuits
موازنہ کریں LM2902KAVQDRG4Q1 →
Texas Instruments
Operating Temperature Range: -55 C to +125 C (-67 F to +257 F)
Slew Rate: 0.5 V/us
Amplifier Type: Quad, general-purpose, voltage-feedback operational amplifier
موازنہ کریں LM2902KAVQDRG4Q1 →
Texas Instruments
Operating Temperature Range: -55 °C to +125 °C
Amplifier Type: General purpose
موازنہ کریں LM2902KAVQDRG4Q1 →

LM2902KVQDRQ1

✅ ڈراپ-اِن
Texas Instruments
📦 14-pin SOIC
4 channels · 26 V · 1.2 MHz · 2 mV · 80 dB · 0.5 V/µs · -0.5 µA · -55 °C to +125 °C

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2902KAVQDRDL

✅ ڈراپ-اِن
📦 14-pin SOIC
Same LM2902KAV family, 26 V maximum supply, 1.2 MHz bandwidth, 2 mV offset, and 14-pin SOIC footprint; ordering-code qualification and temperature details must be checked

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LM2902DG

✅ ڈراپ-اِن
onsemi
📦 14-pin SOIC
Quad operational amplifier · 4 channels · General purpose · 1 MHz · 0.6 V/µs · 3 V · 32 V · True differential inputs

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2902KD

✅ ڈراپ-اِن
Texas Instruments
📦 14-pin SOIC
4 circuits · General-purpose operational amplifier · 26 V · 1.2 MHz · 2 kV · 3 mV · 2 nA · 0.8 mA

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2902D

✅ ڈراپ-اِن
Texas Instruments
📦 14-pin SOIC
Quad operational amplifier · 4 · 26 V · 1.2 MHz · 2 mV · Single supply or split supply · Push-pull

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2902KAVQDRG4Q1 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Number of Amplifier Circuits 4 circuits
Maximum Supply Voltage 26 V
Minimum Listed Supply Voltage 5 V
Gain-Bandwidth Product 1.2 MHz
Offset Voltage 2 mV
Common-Mode Rejection Ratio 80 dB
Slew Rate 0.5 V/µs
آپریٹنگ درجہ حرارت رینج -55°C to 125°C
Package Type 14-pin SOIC
Package Designation PDSO14
Package Body Standard MS-012AB
Human Body Model ESD Rating 2 kV
Automotive Qualification AEC-Q100 qualified
Unity-Gain Stability Stable at unity gain
Overdrive Phase Reversal No phase reversal
Component Type General-purpose voltage-feedback operational amplifier
ماؤنٹنگ اسٹائل Surface mount
Package Material Green plastic

LM2902KAVQDRG4Q1 پن کنفیگریشن

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
پن 1 OUT1 — Amplifier 1 output
پن 2 IN1- — Amplifier 1 inverting input
پن 3 IN1+ — Amplifier 1 non-inverting input
پن 4 V+ — Positive supply connection
پن 5 IN2+ — Amplifier 2 non-inverting input
پن 6 IN2- — Amplifier 2 inverting input
پن 7 OUT2 — Amplifier 2 output
پن 8 OUT3 — Amplifier 3 output
پن 9 IN3- — Amplifier 3 inverting input
پن 10 IN3+ — Amplifier 3 non-inverting input
پن 11 V- — Negative supply connection
پن 12 IN4+ — Amplifier 4 non-inverting input
پن 13 IN4- — Amplifier 4 inverting input
پن 14 OUT4 — Amplifier 4 output

عام استعمالات

LM2902KAVQDRG4Q1 کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive Sensor Signal Conditioning, Industrial Transducer Interface, Active Analog Filters, Power Supply Feedback and Control Loops, Data Acquisition and ADC Drive, Motor and Actuator Support Circuits.

🚗

Automotive Sensor Signal Conditioning

The LM2902KAVQDRG4Q1 is suitable for conditioning low-level automotive sensor signals because its four amplifier sections can support multiple conditioning channels within one 14-pin SOIC. The 2 mV offset specification limits the input-referred error introduced by amplification, while 80 dB CMRR helps reject common-mode interference on sensor wiring. With a 26 V maximum supply and a -55°C to 125°C operating range, the device fits harsh-temperature vehicle electronics. It can implement noninverting gain, differential conversion, active filters, or signal buffers. The 1.2 MHz bandwidth and 0.5 V/µs slew rate are appropriate for sensors that do not require high-speed instrumentation performance, while unity-gain stability simplifies direct voltage-following stages.

🏭

Industrial Transducer Interface

The LM2902KAVQDRG4Q1 provides four amplifiers for industrial transducer interfaces where multiple low-level voltage signals must be amplified before digitization. A 2 mV offset specification helps preserve accuracy when the sensor output is small, and the 80 dB CMRR improves rejection of shared ground and supply disturbances. The four independent channels can combine gain stages, active filters, and output buffers while reducing package count. Its 1.2 MHz gain-bandwidth product supports bandwidths well below the amplifier’s unity-gain limit, and unity-gain stability permits direct buffering. The 26 V maximum supply provides useful headroom in 24 V industrial systems, provided the application also satisfies the minimum supply requirement and appropriate input and output common-mode limits.

📡

Active Analog Filters

The LM2902KAVQDRG4Q1 can implement first- and second-order active filters when a design requires adjustable gain and filtering in the same quad package. Its 1.2 MHz gain-bandwidth product provides frequency headroom above many low-frequency measurement and control signals, while 0.5 V/µs slew rate limits large-signal performance at higher frequencies. Four channels make cascade stages, anti-alias filters, or separate signal-conditioning paths practical without several packages. The amplifier is stable at unity gain and does not change phase under overdrive according to the manufacturer’s family information. Component tolerances and the operating frequency should still be checked against the selected filter topology, and supply bypassing should be placed close to the device’s power pins.

⚡

Power Supply Feedback and Control Loops

The LM2902KAVQDRG4Q1 is suitable for error amplifiers and feedback-control circuits that regulate power rails in industrial or automotive systems. Its 2 mV offset specification contributes directly to the accuracy of the closed-loop feedback node, while the 80 dB CMRR helps the amplifier reject supply-related and ground-referenced disturbances. The 26 V maximum operating supply is especially relevant to 24 V industrial control environments, and four amplifiers allow a design to combine error amplification, current sensing, output buffering, and auxiliary signal conditioning. Designers should account for output-current and output-swing limits when driving feedback nodes, confirm that the compensated loop remains stable across temperature, and place local decoupling capacitors close to the supply pins.

🖥️

Data Acquisition and ADC Drive

The LM2902KAVQDRG4Q1 can buffer sensor outputs and drive the input of a moderately sampled data-conversion channel. The amplifier’s unity-gain stability supports voltage-follower use, while its 2 mV offset specification defines a useful input-referred accuracy baseline for slow analog measurements. The 1.2 MHz gain-bandwidth product is suitable for common industrial acquisition rates, and 0.5 V/µs provides adequate slew capability for many multiplexed sensor outputs. Four channels reduce the number of packages needed for gain, filtering, and buffering stages. Before selecting the device, verify that the ADC input range remains within the amplifier output swing, check capacitive drive requirements, and confirm that the selected ADC does not require a wider settling bandwidth than the closed-loop amplifier configuration provides.

🔧

Motor and Actuator Support Circuits

The LM2902KAVQDRG4Q1 can support current sensing, position-signal conditioning, and control-loop amplification around industrial motors or automotive actuators. Its wide 26 V maximum supply rating suits systems operating from substantial industrial rails, and the 80 dB CMRR helps preserve small sensor signals in electrically noisy environments. The four amplifier sections provide useful channel density for input conditioning, gain, filtering, and output buffering around one actuator interface. Because the device is not intended for high-frequency motor-gate drive, it is better suited to feedback and supervisory paths than to switching-edge amplification. Confirm output-current capability, common-mode range, transient behavior, and fault-current margins in the final application, and maintain local supply decoupling for rapid load changes.

تجویز کردہ پروڈکٹس کا خلاصہ

LM2902K Same-family quad operational amplifier استعمال ہوتا ہے: Automotive Sensor Signal Conditioning, Industrial Transducer Interface, Power Supply Feedback and Control Loops LM2902KVQDRQ1 Texas Instruments استعمال ہوتا ہے: Automotive Sensor Signal Conditioning, Power Supply Feedback and Control Loops, Motor and Actuator Support Circuits LM2902DG onsemi استعمال ہوتا ہے: Industrial Transducer Interface, Data Acquisition and ADC Drive LM2902KAVQDRDL Same-family alternate ordering code استعمال ہوتا ہے: Active Analog Filters, Data Acquisition and ADC Drive LM2902 Base family operational amplifier استعمال ہوتا ہے: Active Analog Filters, Motor and Actuator Support Circuits
What is the LM2902KAVQDRG4Q1?
The LM2902KAVQDRG4Q1 is a Texas Instruments four-circuit operational amplifier in a 14-pin SOIC package. According to the Texas Instruments LM2902KAV product page, the device provides a 30 V family rating, 1.2 MHz gain-bandwidth product, 2 mV offset voltage, and improved 2 kV ESD protection. This automotive-qualified orderable variant is specified for a maximum supply voltage of 26 V and operation from -55°C to 125°C.
What are the key specifications of LM2902KAVQDRG4Q1?
The principal specifications are four amplifier circuits, 1.2 MHz gain-bandwidth product, 2 mV offset voltage, 80 dB CMRR, 0.5 V/µs slew rate, and a 14-pin SOIC package. The device is AEC-Q100 qualified, supports an operating temperature range of -55°C to 125°C, and is stable at unity gain. According to Texas Instruments product information, it also avoids phase reversal during overdrive conditions.
Where can I download the LM2902KAVQDRG4Q1 datasheet PDF?
The official LM2902KAVQDRG4Q1 technical information is available through the Texas Instruments LM2902KAV product page at https://www.ti.com/product/LM2902KAV. The orderable part belongs to the LM2902K family described there. The product page provides the manufacturer datasheet and ordering information, including the 26 V maximum supply, 1.2 MHz bandwidth, 2 mV offset voltage, and 14-pin SOIC package details.
Where can I find the LM2902KAVQDRG4Q1 pinout?
The LM2902KAVQDRG4Q1 pinout is defined by the 14-pin SOIC, or PDSO14, drawing in the Texas Instruments family documentation. The four amplifier sections use 12 signal pins, while two pins provide the positive and negative supply connections. Use the manufacturer pin-description table when assigning PCB tracks and confirm the top-side versus bottom-side orientation of the SOIC before assembly.
Is LM2902KAVQDRG4Q1 suitable for automotive applications?
Yes, the LM2902KAVQDRG4Q1 is identified as AEC-Q100 qualified for automotive applications. Its 26 V maximum supply rating and -55°C to 125°C operating range support harsh-temperature automotive electronics. The part provides four amplifiers per 14-pin SOIC, which can reduce board area in sensor-conditioning, actuator-interface, and general control circuits where several low-frequency analog channels are required.
What can replace the LM2902KAVQDRG4Q1?
The closest same-manufacturer drop-in candidates are the LM2902KVQDRQ1, LM2902KAVQDRDL, LM2902DG, LM2902K, and LM2902 in the 14-pin SOIC family. A replacement should match the four-amplifier pinout, supply-voltage limit, 1.2 MHz bandwidth class, temperature range, and automotive qualification. A verified cross-manufacturer equivalent was not identified, so a cross-brand substitution should not be treated as drop-in without schematic-level verification.
Is LM2902KAVQDRG4Q1 the same as LM2902KVQDRQ1?
The LM2902KAVQDRG4Q1 and LM2902KVQDRQ1 are closely related 14-pin SOIC quad operational amplifiers, but their orderable temperature specifications differ. The LM2902KVQDRQ1 is listed for -40°C to 125°C, while the LM2902KAVQDRG4Q1 specification excerpt lists -55°C to 125°C. Both use the automotive LM2902-Q1 family and provide the same 26 V, 1.2 MHz, 2 mV class of functionality.
LM2902KAVQDRG4Q1 vs LM2902DG - which is better for automotive use?
The LM2902KAVQDRG4Q1 is the stronger choice when AEC-Q100 qualification and operation down to -55°C are required. The LM2902DG belongs to the broader LM2902 family and may satisfy industrial designs, but its suitability for a specific automotive production program depends on its individual ordering specification. Both are associated with the 14-pin SOIC quad-amplifier family, but qualification and temperature coverage should drive the decision.
When should I choose LM2902KAVQDRG4Q1 over LM2902K?
Choose the LM2902KAVQDRG4Q1 when the design needs the specific automotive-qualified orderable variant, a 26 V maximum supply, and operation across -55°C to 125°C. Choose the generic LM2902K family entry when evaluating a standard 26 V, 1.2 MHz, 2 mV offset quad amplifier without a specific automotive ordering suffix. For production, confirm the exact orderable MPN and qualification status rather than relying on a family-level designation.
Is LM2902KAVQDRG4Q1 suitable for sensor signal conditioning?
The LM2902KAVQDRG4Q1 is suitable for low-to-moderate-frequency sensor signal conditioning. Its 2 mV offset specification, 80 dB CMRR, unity-gain stability, and 0.5 V/µs slew rate support common noninverting, inverting, and buffer configurations. Verify the sensor output range against the amplifier input common-mode limits and ensure that source resistance and capacitive loading remain within the manufacturer’s stability guidelines.
How much supply voltage can LM2902KAVQDRG4Q1 use?
The LM2902KAVQDRG4Q1 supports supply voltages up to 26 V, while a minimum supply of 5 V appears in its specification listing. Texas Instruments describes the broader LM2902KAV family as a 30 V operational-amplifier family, so the automotive orderable variant’s 26 V rating is the appropriate limit for design calculations. Do not substitute the family-level 30 V description for the orderable part’s 26 V maximum.
Does LM2902KAVQDRG4Q1 need an external compensation capacitor?
No external compensation capacitor is required for basic unity-gain use because the LM2902KAVQDRG4Q1 is stable at unity gain. This simplifies buffer and voltage-follower layouts in sensor interfaces and control circuits. Closed-loop gain, source impedance, load capacitance, and production tolerances still determine the final stability margin, so follow the manufacturer’s layout and stability guidance for the selected feedback network.
Where can I buy LM2902KAVQDRG4Q1 online?
Use the Request a Quote form on this page to request LM2902KAVQDRG4Q1 pricing, current availability, and lead time. The quote request should include the required quantity, delivery location, and whether reel, tray, or another packing format is needed. This approach keeps commercial terms aligned with the exact orderable MPN, including the automotive qualification and 14-pin SOIC package suffix.
What is the price of LM2902KAVQDRG4Q1?
The current commercial price for LM2902KAVQDRG4Q1 is handled through the Request a Quote form on this page. Submit the required quantity and packaging preference to obtain the applicable offer and any volume or lead-time information. The form is tied to the exact LM2902KAVQDRG4Q1 orderable number, avoiding ambiguity with other LM2902 packaging, temperature, or qualification suffixes.
What is the lead time for LM2902KAVQDRG4Q1?
Lead time for LM2902KAVQDRG4Q1 should be confirmed through the Request a Quote form on this page. Include the required order quantity, target delivery date, and packing preference in the request. Current manufacturing and inventory status can vary by quantity, so obtaining a quote against the complete MPN is the practical way to establish a committed delivery schedule.
Is LM2902KAVQDRG4Q1 in stock?
Current stock for LM2902KAVQDRG4Q1 is handled through the Request a Quote form on this page. State the quantity required and whether production, prototyping, or replenishment is the intended use. Because inventory status can change, a written quotation provides more reliable planning information than a general catalog indication for this exact orderable part.

کے لیے انجینئرنگ ریفرنس ڈیٹا LM2902KAVQDRG4Q1 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose LM2902KAVQDRG4Q1 for automotive or harsh-temperature analog designs that specifically require four amplifiers, a 14-pin SOIC footprint, operation from -55°C to 125°C, AEC-Q100 qualification, and a 26 V maximum supply. LM2902KVQDRQ1 is the closest same-family option when its -40°C minimum is acceptable. LM2902KAVQDRDL can serve as another family ordering option when its individual qualification and temperature details match the design. LM2902DG and the generic LM2902 or LM2902K entries are useful family references, but their exact orderable suffix must be checked before treating them as drop-in production parts. No cross-manufacturer candidate was verified as pin- and parameter-compatible, so a cross-brand substitution requires an independent pinout and electrical review. For nonautomotive industrial designs where exact orderable qualification is not required, a standard LM2902-family device may provide a simpler sourcing path, provided the 26 V limit and -55°C cold rating are not needed.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ LM2902KVQDRQ1 LM2902KAVQDRDL LM2902DG LM2902K LM2902
Package 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Amplifier Count 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits

اہم امتیازی خصوصیات

  • Broader cold-temperature coverage (بمقابلہLM2902KVQDRQ1)
  • Automotive qualification with a 26 V supply limit (بمقابلہLM2902K)
  • Same quad SOIC implementation with defined operating limits (بمقابلہLM2902)

ڈیزائن نوٹس

The LM2902KAVQDRG4Q1 supports supplies up to 26 V, so do not apply the broader family’s 30 V description to this orderable part. Place the supply-decoupling network close to pins 4 and 11, route the return current directly to the supply ground plane, and keep sensitive input traces away from the output and supply nodes. Transient protection should be designed around the actual harness exposure because the device’s 2 kV HBM ESD rating does not replace dedicated automotive surge protection.

Treat the four amplifier channels as separate analog paths even though they share one package. Keep each noninverting and inverting input short, place feedback resistors close to the relevant output and input pins, and avoid routing one channel beneath another channel’s output. If the unused amplifier section is configured as a follower, connect its input to a defined common-mode potential within its operating range; do not leave an input floating.

The unity-gain-stable rating does not guarantee unconditional stability for every source impedance, load capacitance, or feedback topology. Check the selected closed-loop gain, resistive loading, and capacitive loading against the manufacturer guidance. Also confirm output swing and input common-mode limits at the 5 V minimum supply; an amplifier can satisfy its 26 V maximum rating while still lacking sufficient headroom at a lower operating voltage.

The SOIC-14 package is suitable for low-to-moderate amplifier dissipation, but thermal margin depends on the closed-loop gain, output swing, load, and ambient temperature. Estimate the worst-case dissipation from the average output voltage and load current, then confirm that the resulting junction temperature remains below the 125°C upper limit. Use a ground plane and thermal vias where the device dissipates appreciable power or where automotive ambient temperatures leave limited margin.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

Texas Instruments identifies the LM2902-Q1 family as AEC-Q100 qualified for automotive applications. The package is described as green plastic, but explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the cited product listings.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-09 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

LM2902KAVQDRG4Q1 datasheet LM2902KAVQDRG4Q1 pinout LM2902KAVQDRG4Q1 datasheet pdf LM2902KAVQDRG4Q1 specifications LM2902KAVQDRG4Q1 equivalent LM2902KAVQDRG4Q1 replacement LM2902KAVQDRG4Q1 cross reference LM2902KAVQDRG4Q1 SOIC-14 footprint LM2902KAVQDRG4Q1 automotive op amp LM2902KAVQDRG4Q1 price LM2902KAVQDRG4Q1 stock Texas Instruments LM2902KAVQDRG4Q1 LM2902KAVQDRG4Q1 vs LM2902KVQDRQ1 LM2902KAVQDRG4Q1 application circuit

متعلقہ اجزاء اور اصطلاحات

Texas Instruments LM2902KAVQDRG4Q1 LM2902KAV LM2902K LM2902 LM2902KVQDRQ1 LM2902KAVQDRDL LM2902DG operational amplifier op amp quad operational amplifier analog amplifier voltage-feedback amplifier signal conditioning active filter sensor interface unity-gain stability gain-bandwidth product common-mode rejection ratio CMRR slew rate offset voltage 14-pin SOIC PDSO14 surface mount AEC-Q100 automotive electronics ESD protection
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں