LM2902KAVQDRG4Q1 - Quad 26V Op Amp | Texas Instruments
MPN: LM2902KAVQDRG4Q1 ✓ 啟用中LM2902KAVQDRG4Q1 概覽
An operational amplifier, commonly called an op amp, is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The LM2902KAVQDRG4Q1 belongs to the operational amplifier hierarchy: amplifier IC, analog amplifier, voltage-feedback operational amplifier, and power-management-adjacent signal-conditioning IC. Four independent amplifiers are integrated into one package, allowing a circuit to use several gain stages, buffers, filters, or comparators without requiring four separate packages.
Key characteristics include a 1.2 MHz gain-bandwidth product, 2 mV nominal offset voltage, 80 dB common-mode rejection, and a slew rate of 0.5 V/µs. According to the Texas Instruments LM2902KAV product information, the family is stable at unity gain and does not exhibit phase reversal under overdrive conditions. These characteristics suit general-purpose signal conditioning, low-to-moderate-frequency analog processing, sensor interfaces, and industrial or automotive control systems.
The quad amplifier uses a conventional 14-pin SOIC arrangement, with separate input and output pins for four amplifiers and shared power connections. Its wide supply-voltage capability provides headroom for industrial and automotive systems, while the 1.2 MHz bandwidth favors stable, conventional feedback designs rather than demanding high-speed signal-path applications. Unity-gain stability also permits direct buffering without adding a compensation network.
Typical uses include transducer-signal conditioning, current-loop receivers, analog sensor amplification, active filtering, DC motor-control support circuits, and general-purpose automotive electronics. In an instrumentation application, the amplifier can convert a small sensor voltage into a larger voltage suitable for an ADC. In a filter, its bandwidth and slew rate determine the achievable signal rate and response.
Designers should verify input common-mode range, output swing, load capacitance, and stability for each concrete circuit. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels should be configured according to the manufacturer recommendations rather than left floating. The automotive qualification makes this orderable variant appropriate for harsh-temperature electronics when its specified operating limits are respected.
直接替換替代品,適用於 LM2902KAVQDRG4Q1 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LM2902KAVQDRG4Q1 (相同外形與佔位) — 差異在於 Operating Temperature Range, Slew Rate, Amplifier Type, Number of Amplifier Channels, Package Type.
LM2902KVQDRQ1
✅ 直接替換聯絡詢價
查看資料表 →LM2902KAVQDRDL
✅ 直接替換📋 參考替代品(不在目錄中)
LM2902DG
✅ 直接替換聯絡詢價
查看資料表 →LM2902KAVQDRG4Q1 最大額定值與電氣特性
| Number of Amplifier Circuits | 4 circuits |
| Maximum Supply Voltage | 26 V |
| Minimum Listed Supply Voltage | 5 V |
| Gain-Bandwidth Product | 1.2 MHz |
| Offset Voltage | 2 mV |
| Common-Mode Rejection Ratio | 80 dB |
| Slew Rate | 0.5 V/µs |
| 工作溫度範圍 | -55°C to 125°C |
| Package Type | 14-pin SOIC |
| Package Designation | PDSO14 |
| Package Body Standard | MS-012AB |
| Human Body Model ESD Rating | 2 kV |
| Automotive Qualification | AEC-Q100 qualified |
| Unity-Gain Stability | Stable at unity gain |
| Overdrive Phase Reversal | No phase reversal |
| Component Type | General-purpose voltage-feedback operational amplifier |
| 安裝方式 | Surface mount |
| Package Material | Green plastic |
LM2902KAVQDRG4Q1 腳位配置
| 腳位 1 | OUT1 — Amplifier 1 output |
| 腳位 2 | IN1- — Amplifier 1 inverting input |
| 腳位 3 | IN1+ — Amplifier 1 non-inverting input |
| 腳位 4 | V+ — Positive supply connection |
| 腳位 5 | IN2+ — Amplifier 2 non-inverting input |
| 腳位 6 | IN2- — Amplifier 2 inverting input |
| 腳位 7 | OUT2 — Amplifier 2 output |
| 腳位 8 | OUT3 — Amplifier 3 output |
| 腳位 9 | IN3- — Amplifier 3 inverting input |
| 腳位 10 | IN3+ — Amplifier 3 non-inverting input |
| 腳位 11 | V- — Negative supply connection |
| 腳位 12 | IN4+ — Amplifier 4 non-inverting input |
| 腳位 13 | IN4- — Amplifier 4 inverting input |
| 腳位 14 | OUT4 — Amplifier 4 output |
典型應用
LM2902KAVQDRG4Q1 適用於 6 應用s: Automotive Sensor Signal Conditioning, Industrial Transducer Interface, Active Analog Filters, Power Supply Feedback and Control Loops, Data Acquisition and ADC Drive, Motor and Actuator Support Circuits.
Automotive Sensor Signal Conditioning
The LM2902KAVQDRG4Q1 is suitable for conditioning low-level automotive sensor signals because its four amplifier sections can support multiple conditioning channels within one 14-pin SOIC. The 2 mV offset specification limits the input-referred error introduced by amplification, while 80 dB CMRR helps reject common-mode interference on sensor wiring. With a 26 V maximum supply and a -55°C to 125°C operating range, the device fits harsh-temperature vehicle electronics. It can implement noninverting gain, differential conversion, active filters, or signal buffers. The 1.2 MHz bandwidth and 0.5 V/µs slew rate are appropriate for sensors that do not require high-speed instrumentation performance, while unity-gain stability simplifies direct voltage-following stages.
推薦
Industrial Transducer Interface
The LM2902KAVQDRG4Q1 provides four amplifiers for industrial transducer interfaces where multiple low-level voltage signals must be amplified before digitization. A 2 mV offset specification helps preserve accuracy when the sensor output is small, and the 80 dB CMRR improves rejection of shared ground and supply disturbances. The four independent channels can combine gain stages, active filters, and output buffers while reducing package count. Its 1.2 MHz gain-bandwidth product supports bandwidths well below the amplifier’s unity-gain limit, and unity-gain stability permits direct buffering. The 26 V maximum supply provides useful headroom in 24 V industrial systems, provided the application also satisfies the minimum supply requirement and appropriate input and output common-mode limits.
推薦
Active Analog Filters
The LM2902KAVQDRG4Q1 can implement first- and second-order active filters when a design requires adjustable gain and filtering in the same quad package. Its 1.2 MHz gain-bandwidth product provides frequency headroom above many low-frequency measurement and control signals, while 0.5 V/µs slew rate limits large-signal performance at higher frequencies. Four channels make cascade stages, anti-alias filters, or separate signal-conditioning paths practical without several packages. The amplifier is stable at unity gain and does not change phase under overdrive according to the manufacturer’s family information. Component tolerances and the operating frequency should still be checked against the selected filter topology, and supply bypassing should be placed close to the device’s power pins.
推薦
Power Supply Feedback and Control Loops
The LM2902KAVQDRG4Q1 is suitable for error amplifiers and feedback-control circuits that regulate power rails in industrial or automotive systems. Its 2 mV offset specification contributes directly to the accuracy of the closed-loop feedback node, while the 80 dB CMRR helps the amplifier reject supply-related and ground-referenced disturbances. The 26 V maximum operating supply is especially relevant to 24 V industrial control environments, and four amplifiers allow a design to combine error amplification, current sensing, output buffering, and auxiliary signal conditioning. Designers should account for output-current and output-swing limits when driving feedback nodes, confirm that the compensated loop remains stable across temperature, and place local decoupling capacitors close to the supply pins.
推薦
Data Acquisition and ADC Drive
The LM2902KAVQDRG4Q1 can buffer sensor outputs and drive the input of a moderately sampled data-conversion channel. The amplifier’s unity-gain stability supports voltage-follower use, while its 2 mV offset specification defines a useful input-referred accuracy baseline for slow analog measurements. The 1.2 MHz gain-bandwidth product is suitable for common industrial acquisition rates, and 0.5 V/µs provides adequate slew capability for many multiplexed sensor outputs. Four channels reduce the number of packages needed for gain, filtering, and buffering stages. Before selecting the device, verify that the ADC input range remains within the amplifier output swing, check capacitive drive requirements, and confirm that the selected ADC does not require a wider settling bandwidth than the closed-loop amplifier configuration provides.
推薦
Motor and Actuator Support Circuits
The LM2902KAVQDRG4Q1 can support current sensing, position-signal conditioning, and control-loop amplification around industrial motors or automotive actuators. Its wide 26 V maximum supply rating suits systems operating from substantial industrial rails, and the 80 dB CMRR helps preserve small sensor signals in electrically noisy environments. The four amplifier sections provide useful channel density for input conditioning, gain, filtering, and output buffering around one actuator interface. Because the device is not intended for high-frequency motor-gate drive, it is better suited to feedback and supervisory paths than to switching-edge amplification. Confirm output-current capability, common-mode range, transient behavior, and fault-current margins in the final application, and maintain local supply decoupling for rapid load changes.
推薦
推薦產品摘要
工程參考資料,適用於 LM2902KAVQDRG4Q1 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LM2902KVQDRQ1 | LM2902KAVQDRDL | LM2902DG | LM2902K | LM2902 |
|---|---|---|---|---|---|---|
| Package | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Amplifier Count | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
主要差異化特點
- Broader cold-temperature coverage (對比LM2902KVQDRQ1)
- Automotive qualification with a 26 V supply limit (對比LM2902K)
- Same quad SOIC implementation with defined operating limits (對比LM2902)
設計說明
The LM2902KAVQDRG4Q1 supports supplies up to 26 V, so do not apply the broader family’s 30 V description to this orderable part. Place the supply-decoupling network close to pins 4 and 11, route the return current directly to the supply ground plane, and keep sensitive input traces away from the output and supply nodes. Transient protection should be designed around the actual harness exposure because the device’s 2 kV HBM ESD rating does not replace dedicated automotive surge protection.
Treat the four amplifier channels as separate analog paths even though they share one package. Keep each noninverting and inverting input short, place feedback resistors close to the relevant output and input pins, and avoid routing one channel beneath another channel’s output. If the unused amplifier section is configured as a follower, connect its input to a defined common-mode potential within its operating range; do not leave an input floating.
The unity-gain-stable rating does not guarantee unconditional stability for every source impedance, load capacitance, or feedback topology. Check the selected closed-loop gain, resistive loading, and capacitive loading against the manufacturer guidance. Also confirm output swing and input common-mode limits at the 5 V minimum supply; an amplifier can satisfy its 26 V maximum rating while still lacking sufficient headroom at a lower operating voltage.
The SOIC-14 package is suitable for low-to-moderate amplifier dissipation, but thermal margin depends on the closed-loop gain, output swing, load, and ambient temperature. Estimate the worst-case dissipation from the average output voltage and load current, then confirm that the resulting junction temperature remains below the 125°C upper limit. Use a ground plane and thermal vias where the device dissipates appreciable power or where automotive ambient temperatures leave limited margin.
合規資訊
Texas Instruments identifies the LM2902-Q1 family as AEC-Q100 qualified for automotive applications. The package is described as green plastic, but explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the cited product listings.