Texas Instruments

LM2902KVQPWRG4 - 30V Quad Op Amp | Texas Instruments

MPN: LM2902KVQPWRG4 ✓ فعال
30 V Vdss -0.5 µA Id 14-pin TSSOP (PW) Package One-compensator architecture per amplifier channel Speed
MOQ: 1 |

LM2902KVQPWRG4 جائزہ

Texas Instruments LM2902KVQPWRG4 is a quad operational amplifier with a 30 V supply rating, 1.2 MHz gain-bandwidth product, and improved 2 kV ESD protection, housed in a 14-pin TSSOP (PW) package. The device supports operation from -40°C to 125°C and provides four independent, high-gain, frequency-compensated amplifiers for single-supply or split-supply operation.

An operational amplifier is a voltage-feedback amplifier used to amplify differential signals and drive high-impedance loads. Within the broader semiconductor hierarchy, this quad device belongs to the operational-amplifier family, analog amplifier IC category, and general-purpose signal-conditioning ecosystem. Four amplifiers in one package reduce board area and simplify designs requiring several independent analog channels.

The LM2902KV generation improves electrical characteristics while retaining compatibility with established LM224, LM324, and LM2902 applications. Its 30 V maximum supply rating supports higher-voltage analog systems than conventional 26 V quad op amps. A 1.2 MHz gain-bandwidth product supports general-purpose closed-loop signal processing, while the stated 80 dB common-mode rejection ratio helps suppress output response to common-mode input variation. Improved 2 kV ESD protection strengthens robustness in exposed industrial environments.

Each amplifier includes high open-loop gain, differential input capability, and internal frequency compensation. The device can operate from a single supply or from positive and negative rails, making it suitable for bipolar signal conditioning around a zero-volt reference. Its common-mode input range, output swing limits, input-bias current, and input-offset-voltage limits should be checked against the system’s signal levels and supply headroom before finalizing a design.

Typical uses include industrial sensor interfaces, low-frequency active filters, transducers, audio preamplifier stages, analog-to-digital converter input conditioning, and general feedback-control circuits. Four independent channels are especially useful when a design needs several filtered or buffered signals and board area is constrained. The 14-pin TSSOP package supports compact surface-mount assemblies while exposing all four amplifier sections.

For stable operation, use the manufacturer-recommended bypass capacitors close to the supply pins, maintain adequate output-load capacitance, and verify operation across the complete -40°C to 125°C temperature range. Input and output voltages must remain within the device’s absolute-maximum and common-mode limits. Stable feedback-network design is also essential when operating at higher frequencies or with nonstandard gain settings.

This product page organizes the manufacturer’s principal operating limits, package information, pin assignment, verified commercial parameters, and practical design guidance. It also distinguishes the closest same-footprint alternatives by supply rating, precision grade, temperature range, and ESD capability so engineers can make a replacement decision without changing the PCB land pattern.

کے لیے ڈراپ اِن متبادل LM2902KVQPWRG4 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں LM2902KVQPWRG4 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package.

Texas Instruments
Package: 14-pin TSSOP (PW)
موازنہ کریں LM2902KVQPWRG4 →
Texas Instruments
Package: 14-TSSOP
موازنہ کریں LM2902KVQPWRG4 →

LM2902PWRG4

✅ ڈراپ-اِن
Texas Instruments
📦 TSSOP-14 (PW)
Quad general-purpose operational amplifier · 4 circuits · 26 V · 1.2 MHz · 14-TSSOP · Surface mount · Single supply or dual supply

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2902QPWRG4

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 TSSOP-14 (PW)
Uses the 26 V LM2902-family supply rating rather than the 30 V LM2902KV rating, a 15.4% reduction, with the same 14-pin TSSOP footprint.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LM2902KPWRG4

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 TSSOP-14 (PW)
Uses the 26 V LM2902-family supply rating and standard offset grade rather than the LM2902KV’s 30 V rating and improved ESD specification.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LM2902KVQPWR

✅ ڈراپ-اِن
Texas Instruments
📦 TSSOP-14 (PW)
Quad general-purpose operational amplifier · 4 circuits · 30 V · 1.2 MHz · 2 kV · -40°C to 125°C · 14-pin TSSOP (PW) · 14 pins

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2902KVQPWRG4 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Amplifier Type Quad general-purpose operational amplifier
Number of Amplifier Channels 4 channels
Maximum Supply Voltage 30 V
Gain-Bandwidth Product 1.2 MHz
Improved ESD Protection 2 kV
آپریٹنگ درجہ حرارت رینج -40°C to 125°C
Common-Mode Rejection Ratio 80 dB
Slew Rate 0.5 V/µs
Input Bias Current -0.5 µA
Low Input Offset Voltage ±3 mV standard grade; ±2 mV BA grade
Package Type 14-pin TSSOP (PW)
پنز کی تعداد 14 pins
ماؤنٹنگ ٹائپ Surface mount
Supply Configuration Single supply or split supply
Internal Frequency Compensation One-compensator architecture per amplifier channel
Automotive Qualification AEC-Q100 qualified

LM2902KVQPWRG4 پن کنفیگریشن

TSSOP-14 (4.4mm) Package Pinout Diagram TSSOP-14 4.4x5mm, P0.65mm, JEDEC MO-153. 14-pin thin shrink. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 TSSOP-14 (4.4mm)
پن 1 OUT1 — Amplifier 1 output
پن 2 IN1- — Amplifier 1 inverting input
پن 3 IN1+ — Amplifier 1 non-inverting input
پن 4 V- — Negative supply connection
پن 5 IN2+ — Amplifier 2 non-inverting input
پن 6 IN2- — Amplifier 2 inverting input
پن 7 OUT2 — Amplifier 2 output
پن 8 OUT3 — Amplifier 3 output
پن 9 IN3- — Amplifier 3 inverting input
پن 10 IN3+ — Amplifier 3 non-inverting input
پن 11 V+ — Positive supply connection
پن 12 IN4+ — Amplifier 4 non-inverting input
پن 13 IN4- — Amplifier 4 inverting input
پن 14 OUT4 — Amplifier 4 output

عام استعمالات

LM2902KVQPWRG4 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor Signal Conditioning, Active Filters and Audio Preamplification, ADC and DAC Interface Conditioning, Power Supply Feedback and Monitoring, Process Control and Instrumentation, Portable and Automotive-Assisted Control Modules.

🏭

Industrial Sensor Signal Conditioning

The LM2902KVQPWRG4 is well suited to conditioning low-level sensor signals in industrial electronics because it combines four independent channels with a 1.2 MHz gain-bandwidth product and 80 dB common-mode rejection ratio. Its -40°C to 125°C operating range supports equipment exposed to temperature variation, while the 30 V supply rating accommodates 24 V industrial rails with suitable transient protection. The device can implement differential input stages, gain blocks, anti-alias filters, and output drivers around a common sensor-conditioning board. Four channels also reduce package count and simplify routing when several transducers are present. Designers should still verify the input common-mode range against sensor output levels and ensure that source impedance does not degrade offset or bias-current performance.

🎧

Active Filters and Audio Preamplification

With a 1.2 MHz gain-bandwidth product and 0.5 V/µs slew rate, the LM2902KVQPWRG4 can implement general-purpose active filters and low-frequency preamplifier sections. Four channels permit cascaded filter stages, dual-channel audio paths, or a mixture of filtering and gain functions in one 14-pin TSSOP. The 80 dB common-mode rejection ratio helps preserve signal integrity when both inputs are near the same reference voltage, which is common in single-supply audio and control circuits. Stable operation depends on the selected gain, resistor values, load, and output-capacitance limits described by the manufacturer. Keep the feedback network compact and provide the specified bypass capacitance to minimize oscillation risk.

📺

ADC and DAC Interface Conditioning

The LM2902KVQPWRG4 can provide buffering, level shifting, differential amplification, and active filtering in mixed-signal systems connected to ADCs or DACs. Its 1.2 MHz gain-bandwidth product is appropriate for many low- and moderate-frequency instrumentation channels, while four amplifiers allow several converter inputs or outputs to be conditioned independently. The common-mode rejection ratio of 80 dB reduces output movement caused by shared ground or supply disturbances. Because the output swing and input common-mode range depend on the supply voltage, designers must compare converter signal limits with the device’s operating region. A solid ground plane and local supply bypassing are especially important when high-impedance sensor outputs are converted with millivolt-level resolution.

⚡

Power Supply Feedback and Monitoring

The LM2902KVQPWRG4 can amplify the error voltage in a linear regulator or form part of a power-supply monitoring circuit. Its 30 V supply rating is useful in 12 V and 24 V systems, while the 1.2 MHz bandwidth permits feedback loops intended for relatively slow power rails rather than high-frequency switching converters. The four-channel configuration can monitor several supply rails, sense input dividers, amplify comparator signals, and buffer reference nodes. Feedback compensation must be designed around the specific regulator control loop rather than copied directly from a generic op-amp example. Keep the feedback divider close to the regulator and separate sensitive sensing routes from high-current switching paths to reduce injected noise and ground-bounce errors.

🔧

Process Control and Instrumentation

The LM2902KVQPWRG4 is applicable to process-control modules that combine several low-frequency analog signals, including thermocouple-style amplifiers, valve-driver interfaces, current-loop conditioning, and output scaling. Its -40°C to 125°C range suits equipment operating across industrial temperature zones, and the 30 V capability provides headroom for 24 V control loops. The four channels can reduce component count in compact controller boards while maintaining independent compensation and gain settings. Care is required near grounded thermocouple junctions because input bias current and offset voltage can create meaningful errors in microvolt-level systems. Use low-leakage input protection networks, clean reference grounding, and shielded analog routing when the source impedance is high.

🚗

Portable and Automotive-Assisted Control Modules

The LM2902KVQPWRG4 can be used in compact control modules requiring four general-purpose analog channels and operation over an extended temperature range. The 14-pin TSSOP package helps limit board area, while the 30 V rating and improved 2 kV ESD capability support 12 V or 24 V systems with appropriate transient suppression. Applications include actuator interfaces, battery monitoring, fan-control analog sections, and vehicle or industrial accessory modules. The automotive-related suitability of the family does not replace project-specific qualification of the exact ordering variant. Engineers must verify the exact temperature grade, ESD qualification, automotive qualification status, and production requirements before using the device in a safety-related or high-volume automotive design.

What is the LM2902KVQPWRG4?
The LM2902KVQPWRG4 is a four-channel, general-purpose operational amplifier from Texas Instruments with a 30 V supply rating and a 1.2 MHz gain-bandwidth product. According to the Texas Instruments LM2902KV product page, the device operates from -40°C to 125°C and is packaged in a 14-pin TSSOP. It contains four independent, high-gain, frequency-compensated amplifier channels for single- or split-supply analog signal conditioning.
What are the key specifications of LM2902KVQPWRG4 that engineers should know?
The LM2902KVQPWRG4 combines four operational-amplifier channels, a 30 V maximum supply rating, 1.2 MHz gain-bandwidth product, 80 dB common-mode rejection ratio, and 0.5 V/µs slew rate in a 14-pin TSSOP package. According to the Texas Instruments LM2902KV product page, it also provides improved 2 kV ESD protection and operates from -40°C to 125°C, making it suitable for general-purpose industrial and instrumentation signal paths.
Where can I download the LM2902KVQPWRG4 datasheet PDF?
The official LM2902KV documentation is available through the Texas Instruments product page at https://www.ti.com/product/LM2902KV. The ordering table identifies LM2902KVQPWRG4 as a 14-pin TSSOP (PW) version rated for -40°C to 125°C operation. Use the manufacturer’s ordering information and datasheet to confirm electrical limits, pin functions, test conditions, and package drawings before releasing a PCB or production document.
Where can I find the LM2902KVQPWRG4 pinout?
The LM2902KVQPWRG4 pinout is defined by the 14-pin TSSOP (PW) pin-description table in the Texas Instruments LM2902KV documentation. Pins 1, 7, 8, and 14 are amplifier outputs, while the remaining pins are divided among the four differential input pairs and the positive and negative supply connections. Assign PCB tracks using the manufacturer’s numbered package drawing rather than relying only on generic TSSOP artwork.
What supply voltage range does LM2902KVQPWRG4 support?
The LM2902KVQPWRG4 is specified for operation with a maximum supply rating of 30 V and is designed to operate from either a single supply or split supplies. The exact minimum and maximum operating-supply limits, along with common-mode and output-swing restrictions, should be taken from the LM2902KV manufacturer datasheet. Account for the rail-to-rail margin required by the selected feedback network and output load.
Is LM2902KVQPWRG4 suitable for industrial sensor interfaces?
Yes, the LM2902KVQPWRG4 fits many industrial sensor-interface stages because it combines a 30 V supply rating, 1.2 MHz gain-bandwidth product, 80 dB common-mode rejection ratio, and operation from -40°C to 125°C. According to the Texas Instruments LM2902KV product page, improved 2 kV ESD protection also adds useful robustness. Sensor excitation, filtering, and ground-reference requirements must still be evaluated for the specific signal range.
What is the difference between LM2902KVQPWRG4 and LM2902PWRG4?
The LM2902KVQPWRG4 is the improved 30 V, 1.2 MHz version with enhanced ESD protection and a -40°C to 125°C operating range, while the LM2902PWRG4 is the established 26 V general-purpose quad op amp in the same 14-pin TSSOP family. According to the Texas Instruments product documentation, LM2902KV is a drop-in replacement with upgraded functionality; final qualification should still compare the detailed electrical limits and temperature grades.
LM2902KVQPWRG4 vs LM2902NG - which is better for a 14-pin TSSOP PCB?
Choose the LM2902KVQPWRG4 for a PCB specifically designed around the 14-pin TSSOP (PW) footprint, because the LM2902NG uses a different 14-pin package family. The LM2902KV version provides a 30 V supply rating, 1.2 MHz gain-bandwidth product, improved 2 kV ESD protection, and operation to 125°C. An LM2902NG is electrically similar in function but cannot be treated as footprint-compatible without a package redesign.
When should I choose LM2902KVQPWRG4 over LM2902PWRG4?
Choose LM2902KVQPWRG4 when the circuit can benefit from its 30 V supply capability, improved ESD rating of 2 kV, and -40°C to 125°C operation while retaining a 14-pin TSSOP layout. Choose the original LM2902PWRG4 when it already meets the required electrical limits and lifecycle needs for a proven 26 V design. Review offset voltage, bias current, common-mode range, and stability in the manufacturer’s comparison tables.
Is LM2902KVQPWRG4 suitable for a 24 V industrial control circuit?
The LM2902KVQPWRG4 is a candidate for a 24 V industrial control circuit because its 30 V supply rating exceeds 24 V, and its -40°C to 125°C range covers many industrial environments. The complete input common-mode range and output swing must remain compatible with the sensor or controller signals. Add protection against transients that could exceed the device’s absolute-maximum ratings.
What is the best drop-in replacement for LM2902KVQPWRG4?
The closest same-footprint replacement identified for LM2902KVQPWRG4 is the Texas Instruments LM2902PWRG4 in the 14-pin TSSOP (PW) package. It retains the quad, 1.2 MHz general-purpose amplifier architecture, but LM2902KV adds a 30 V supply rating and improved 2 kV ESD protection. Therefore, LM2902PWRG4 is suitable only when the lower original supply limit and ESD rating meet the target system requirements.
Can LM2902PWRG4 replace LM2902KVQPWRG4?
Yes, LM2902PWRG4 can replace LM2902KVQPWRG4 in a 14-pin TSSOP design only if the replacement satisfies the original circuit’s voltage, temperature, ESD, offset, bias-current, common-mode, and output-swing requirements. The key differences are the LM2902KV’s 30 V supply rating and improved 2 kV ESD protection versus the original LM2902’s 26 V rating. Review the complete datasheet before approving the substitution.
What can replace LM2902KVQPWRG4 without changing the PCB?
A PCB-compatible replacement must use the same 14-pin TSSOP (PW) land pattern and preserve the four-amplifier channel arrangement. Texas Instruments’ LM2902PWRG4 is the closest documented same-footprint option, while LM2902KVQPWR and LM2902KPWRG4 are lower-cost same-family choices for designs whose supply and temperature requirements are less demanding. No cross-brand equivalent was documented with enough package-level detail for unconditional qualification.
Where can I buy LM2902KVQPWRG4 online?
The LM2902KVQPWRG4 can be requested through the “Request a Quote” form on this product page, where the exact suffix, package, quantity, and current lead time can be confirmed with the seller. The manufacturer identifies the device as a 14-pin TSSOP (PW) orderable variant. Because quotation-based procurement avoids stale commercial information, request the current commercial terms directly through the form rather than relying on a static listing.
What is the price of LM2902KVQPWRG4?
Use the “Request a Quote” form on this page for the current LM2902KVQPWRG4 price and quantity pricing. Commercial terms can vary with order quantity, package suffix, inventory, and purchasing conditions. The product is the 14-pin TSSOP (PW) version of the 30 V, 1.2 MHz LM2902KV quad operational amplifier, so include that complete MPN when requesting a quotation.
What is the lead time and stock status for LM2902KVQPWRG4?
Request the current stock position, lead time, and minimum order quantity through the “Request a Quote” form on this page. Texas Instruments identifies LM2902KVQPWRG4 as the 14-pin TSSOP (PW) ordering variant with a -40°C to 125°C temperature range. Include your required quantity, date code, and approved-supplier criteria so the commercial response can be matched to the production schedule.

کے لیے انجینئرنگ ریفرنس ڈیٹا LM2902KVQPWRG4 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose LM2902KVQPWRG4 when the design needs four general-purpose amplifier channels, a 30 V supply rating, improved 2 kV ESD protection, and operation from -40°C to 125°C. It is particularly suitable for 12 V or 24 V industrial signal-conditioning boards where package area and component count matter. Select LM2902PWRG4 for established 26 V designs that already meet their ESD and temperature requirements. LM2902QPWRG4 and LM2902KPWRG4 are useful same-footprint family options when their electrical and qualification limits satisfy the circuit, but they do not provide the LM2902KV’s 30 V supply advantage. Do not substitute LM2902NG without redesigning the PCB for its SOIC footprint. For every option, verify the input common-mode range, output swing, offset voltage, bias current, capacitive-load stability, and automotive qualification before production release.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ LM2902PWRG4 LM2902QPWRG4 LM2902KPWRG4 LM2902KVQPWR
Package TSSOP-14 (PW) TSSOP-14 (PW) - same TSSOP-14 (PW) - same TSSOP-14 (PW) - same TSSOP-14 (PW) - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Maximum Supply Voltage 30 V 26 V 26 V 26 V 30 V
Gain-Bandwidth Product 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz
Number of Channels 4 4 4 4 4

اہم امتیازی خصوصیات

  • Higher supply-voltage capability within the same 14-pin TSSOP family (بمقابلہLM2902PWRG4)
  • Improved ESD capability for exposed analog interfaces (بمقابلہLM2902PWRG4)
  • Extended-temperature operation for industrial systems (بمقابلہLM2902NG)

ڈیزائن نوٹس

Place the required bypass capacitors directly between the V+ and V- pins and their nearest ground-plane connections. Keep these loops short because trace inductance can couple switching noise into the amplifier output. The 30 V supply rating leaves room above a 24 V rail, but it is not a transient withstand rating; add suitable surge and reverse-polarity protection wherever industrial wiring can exceed the nominal supply.

Route each differential input pair together and avoid routing them parallel to power-supply or switching-node traces. Maintain a continuous ground reference beneath the inputs and feedback resistors, and keep unused amplifier channels in a defined, stable state rather than allowing them to float. The 14-pin TSSOP footprint has closely spaced supply and signal pins, so inspect the manufacturer’s land pattern and solder-mask recommendations before releasing artwork.

Do not assume that a 30 V maximum supply rating permits 30 V input signals at every pin. Check the absolute-maximum table, input common-mode range, output swing, and power-versus-current limits in the LM2902KV datasheet. Also verify offset voltage and input-bias-current effects when the source impedance is high; 80 dB common-mode rejection does not eliminate errors caused by bias current through unequal source resistances.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The family is identified as AEC-Q100 qualified for automotive applications. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer declaration or product documentation.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-09 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

LM2902KVQPWRG4 datasheet LM2902KVQPWRG4 pinout LM2902KVQPWRG4 specifications LM2902KVQPWRG4 equivalent LM2902KVQPWRG4 replacement LM2902KVQPWRG4 vs LM2902PWRG4 Texas Instruments LM2902KVQPWRG4 LM2902KVQPWRG4 price LM2902KVQPWRG4 stock LM2902KVQPWRG4 application circuit

متعلقہ اجزاء اور اصطلاحات

Texas Instruments LM2902KVQPWRG4 LM2902KVQPWR LM2902PWRG4 LM2902QPWRG4 LM2902KPWRG4 LM2902NG operational amplifier quad operational amplifier voltage-feedback amplifier analog amplifier IC general-purpose amplifier TSSOP-14 PW package surface mount SMD 1.2 MHz gain-bandwidth product 30 V supply rating 80 dB common-mode rejection ratio 2 kV ESD protection -40°C to 125°C single-supply operation split-supply operation AEC-Q100 RoHS REACH
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں