Texas Instruments

LM3241TLE/DRSN - 750mA Adjustable Step-Down Converter | Texas Instruments

MPN: LM3241TLE/DRSN ✓ فعال
2.7 V to 5.5 V Vdss 750 mA Id TLE surface-mount package Package 6 MHz Speed
MOQ: 1 |

LM3241TLE/DRSN جائزہ

Texas Instruments LM3241TLE/DRSN is a miniature adjustable step-down DC-DC converter optimized for powering RF power amplifiers from a single lithium-ion cell. The device accepts an input voltage from 2.7 V to 5.5 V and provides an adjustable output voltage from 0.6 V to 3.4 V. Its switching frequency is 6 MHz, and its specified output-current capability reaches 750 mA. The LM3241TLE/DRSN is packaged in the TLE surface-mount package and is intended for compact mobile and portable RF systems.

A DC-DC converter is a switching regulator that transfers energy from an input rail to a regulated lower output using an inductor, switching devices, and a control loop. Compared with a linear regulator, a properly designed step-down converter can provide high conversion efficiency across a wider input-to-output voltage range, although switching ripple and electromagnetic interference must be controlled. The LM3241 is specifically designed for RF power-amplifier supply regulation, where the output level may need to track RF operating conditions.

The principal electrical features include a 2.7 V to 5.5 V input range, a 0.6 V to 3.4 V adjustable output range, 6 MHz switching frequency, and 750 mA output-current capability. The output voltage is controlled through the VCON analog input, allowing the converter to adjust power delivery to the RF power amplifier as required by the transmitter control system. This analog control interface is a key distinction from conventional fixed-output or digital-control converters.

The LM3241 architecture is suited to battery-operated equipment because it operates from a single-cell lithium-ion source and can regulate a lower RF supply rail. Its high switching frequency helps reduce the size of the passive components in compact designs. Designers should still account for inductor ripple current, capacitor ESR, switching-node layout, and thermal dissipation when using the device at high load. The manufacturer product page and datasheet are the appropriate references for the complete electrical characteristics, recommended application circuit, and package dimensions.

Typical uses include RF power-amplifier supplies in mobile phones, portable communicators, and other battery-powered RF devices. The LM3241 can also be used in general applications where a compact adjustable step-down converter is required. The VCON input is particularly useful in RF systems that need dynamic output-voltage control rather than a single fixed supply voltage.

For PCB implementation, place the input and output capacitors close to their respective device pins and keep the switching loop compact. Use the manufacturer-recommended inductor and capacitor values, and reserve adequate copper area for thermal dissipation. Confirm the operating voltage, load current, output ripple, and RF-control requirements before finalizing the power-supply design. Use the manufacturer datasheet pin-description table when assigning PCB tracks.

This page combines the confirmed LM3241TLE/DRSN specifications, sourcing information, application guidance, and documented replacement considerations into a design-focused reference. It emphasizes the verified 2.7 V to 5.5 V input range, 0.6 V to 3.4 V adjustable output range, 6 MHz switching frequency, 750 mA capability, RF power-amplifier orientation, and practical PCB and thermal design considerations.

کے لیے ڈراپ اِن متبادل LM3241TLE/DRSN — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

LM3241TLE

✅ ڈراپ-اِن
📦 TLE surface-mount package
Same LM3241 family and TLE package; ordering suffix differs, with the specific delivery format requiring confirmation

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LM3241TLE/DRSN زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type Adjustable step-down DC-DC converter
اِن پٹ وولٹیج رینج 2.7 V to 5.5 V
Adjustable Output Voltage Range 0.6 V to 3.4 V
سوئچنگ فریکوئنسی 6 MHz
زیادہ سے زیادہ آؤٹ پٹ کرنٹ 750 mA
Control Input VCON analog input
Primary Application RF power amplifier supply
Input Source Single lithium-ion cell
ٹوپولوجی Step-down switching converter
پیکیج TLE surface-mount package
ماؤنٹنگ ٹائپ Surface mount
Manufacturer Product Page Texas Instruments LM3241

LM3241TLE/DRSN tle surface-mount package پن کنفیگریشن گائیڈ

LM3241TLE/DRSN (tle surface-mount package پیکیج) کے لیے پن کنفیگریشن۔ یہ پاور ڈیوائس گیٹ، ڈرین اور سورس ٹرمینلز کی حامل ہے۔ غیر قطبی پیکیجز کے لیے، پن 1 کی درست سمت اور فوٹ پرنٹ کی تفصیلات کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ عام استعمالات میں پاور سپلائی ڈیزائن، موٹر ڈرائیونگ اور لوڈ سوئچنگ شامل ہیں۔

LM3241TLE/DRSN کے لیے tle surface-mount package پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں LM3241TLE/DRSN.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

LM3241TLE/DRSN کے لیے موزوں ہے 6 ایپلیکیشنs: Mobile Phone RF Power Amplifier, Portable RF Communication Equipment, Battery-Powered RF Sensor System, Dynamically Controlled RF Power Stage, Compact Consumer Power Rail, RF Front-End Power Supply.

📱

Mobile Phone RF Power Amplifier

The LM3241TLE/DRSN fits a mobile-phone RF power-amplifier supply because it operates directly from a 2.7 V to 5.5 V single-cell input range and delivers an adjustable 0.6 V to 3.4 V rail. The VCON analog input allows the transmitter control system to vary RF power-amplifier supply voltage as operating conditions change. Its 6 MHz switching architecture supports compact RF modules, although the layout must minimize switching-loop area and output ripple near the amplifier.

🌐

Portable RF Communication Equipment

For portable communicators operating from a lithium-ion cell, the LM3241TLE/DRSN combines a 2.7 V to 5.5 V input range with an adjustable output up to 3.4 V. The VCON control input can coordinate amplifier power with transmit demand, helping avoid a permanently fixed supply setting. At 6 MHz and up to 750 mA, the device is suited to compact RF hardware where component size, conversion efficiency, and dynamic output control are important.

🧩

Battery-Powered RF Sensor System

A battery-powered RF sensor assembly can use the LM3241TLE/DRSN to derive an adjustable low-voltage rail from a single-cell source. The confirmed 2.7 V to 5.5 V input capability accommodates the cell operating region, while the 0.6 V to 3.4 V output range supports RF circuitry requiring controlled supply voltage. The analog VCON interface also allows power levels to follow operating modes rather than remaining fixed.

📡

Dynamically Controlled RF Power Stage

The LM3241TLE/DRSN is appropriate when an RF power stage requires a continuously adjustable supply rather than a fixed regulator output. Driving VCON allows the control system to request different output levels within the 0.6 V to 3.4 V range, supporting changes in transmit power. The 750 mA device rating provides the stated current capability, but thermal and inductor checks remain necessary under sustained maximum-load conditions.

🔧

Compact Consumer Power Rail

The LM3241TLE/DRSN can also serve compact consumer equipment requiring a regulated rail below a single-cell source voltage. Its 6 MHz switching frequency enables compact passive components, and the 2.7 V to 5.5 V input range supports common lithium-ion operating voltages. For non-RF products, verify the VCON control behavior, output ripple, load transient response, and thermal performance against the manufacturer test conditions.

📶

RF Front-End Power Supply

An RF front end requiring a controlled supply can benefit from the LM3241TLE/DRSN's adjustable 0.6 V to 3.4 V output and VCON power-control interface. The device may be placed between a single-cell battery rail and the RF amplifier supply, allowing supply voltage to track operating demand. Careful decoupling and a compact high-frequency layout are necessary to prevent switching ripple from degrading receiver or transmitter performance.

تجویز کردہ پروڈکٹس کا خلاصہ

LM3241TLE Same-family TI ordering option for LM3241 applications استعمال ہوتا ہے: Mobile Phone RF Power Amplifier, Portable RF Communication Equipment, Battery-Powered RF Sensor System, Dynamically Controlled RF Power Stage, Compact Consumer Power Rail, RF Front-End Power Supply
What is the operating voltage of LM3241TLE/DRSN?
The LM3241TLE/DRSN operates from a 2.7 V to 5.5 V input supply. According to the Texas Instruments LM3241 product page and datasheet, this range is designed for single-cell lithium-ion powered equipment, while the output is adjustable from 0.6 V to 3.4 V. Confirm the exact rail limits and load conditions in the manufacturer electrical-characteristics table before finalizing a design.
What is the maximum output current of LM3241TLE/DRSN?
The LM3241TLE/DRSN is specified for up to 750 mA output current. The Texas Instruments LM3241 product page identifies the device as a 6 MHz, 750 mA miniature adjustable step-down converter. Actual usable current depends on input voltage, output voltage, inductor selection, thermal conditions, and the switching-converter layout.
Where can I download the LM3241 datasheet PDF?
The official Texas Instruments LM3241 datasheet is available through the manufacturer's product-information link at https://www.ti.com/lit/gpn/LM3241, and the product details are listed at https://www.ti.com/product/LM3241. Use the manufacturer document for the recommended application circuit, pin descriptions, electrical limits, component values, and package dimensions.
Where can I find the LM3241TLE/DRSN pinout?
The LM3241TLE/DRSN pin assignments are shown in the pin-description section of the Texas Instruments LM3241 datasheet. The exact TLE pin numbering should be taken from that document rather than inferred from the generic DC-DC-converter category. When assigning PCB tracks, compare the complete pin-description table with the selected TLE footprint.
How is the LM3241 output voltage controlled?
The LM3241 output voltage is controlled through its VCON analog input rather than only through a fixed feedback setting. According to the Texas Instruments product page, VCON controls power levels and efficiency for an RF power amplifier. The permitted output range is 0.6 V to 3.4 V, and the control network should follow the manufacturer application guidance.
What applications use the LM3241TLE/DRSN?
The LM3241TLE/DRSN is optimized for RF power-amplifier supplies in mobile phones, portable communicators, and other battery-powered RF devices. Its single-cell input range, adjustable output, and VCON control input suit systems that vary RF amplifier power dynamically. The same converter can also serve compact equipment requiring a regulated lower-voltage rail.
Is LM3241TLE/DRSN suitable for a single lithium-ion cell?
Yes. The Texas Instruments LM3241 is designed to power RF power amplifiers from a single lithium-ion cell. Its confirmed 2.7 V to 5.5 V input range covers the nominal operating region of a single-cell source, while the adjustable 0.6 V to 3.4 V output allows the RF supply to follow changing power-amplifier requirements.
What is the switching frequency of LM3241TLE/DRSN?
The LM3241TLE/DRSN switches at 6 MHz. The manufacturer identifies the LM3241 as a 6 MHz miniature adjustable step-down converter. This high switching rate supports compact passive-component implementation, but the final PCB still needs short switching loops and carefully selected input and output capacitors to control ripple and EMI.
What is the LM3241TLE/DRSN package?
The LM3241TLE/DRSN is supplied in the TLE surface-mount package. Texas Instruments uses the TLE ordering code for this package, and the /DRSN suffix identifies the ordering format shown on the manufacturer and distributor records. Use the package drawing and land-pattern information in the LM3241 datasheet when creating the PCB footprint.
Is LM3241TLE/DRSN in stock?
Current stock status and delivery timing should be requested through the Request a Quote form on this page. The available distributor records include both stocked and out-of-stock indications for different channels, so neither status should be treated as a universal inventory guarantee. The quote form can confirm the current lead time and available order quantity.
What is the price of LM3241TLE/DRSN?
Use the Request a Quote form on this page to obtain the current customer pricing and available quantity for LM3241TLE/DRSN. Pricing can vary with order quantity, purchasing schedule, and channel conditions. The form provides the appropriate quotation path without relying on a stale starting-price figure.
What is the lead time for LM3241TLE/DRSN?
The current lead time and minimum order quantity should be confirmed through the Request a Quote form on this page. The verified distributor information does not provide one universal lead time for every order quantity, so purchasing teams should provide their forecast and required delivery date when requesting a quotation.
LM3241TLE/DRSN vs LM3241TLE - which is the better drop-in choice?
The LM3241TLE and LM3241TLE/DRSN identify the same LM3241 device family, while the ordering suffixes can indicate different delivery formats. Before treating either as a drop-in replacement, compare the manufacturer ordering information, reel or tray format, quantity, and the exact TLE package drawing. Electrical and pin compatibility must be confirmed from the datasheet.
When should I choose LM3241TLE/DRSN over a fixed-output regulator?
Choose the LM3241TLE/DRSN when the RF power-amplifier supply must vary dynamically through the VCON analog input. A fixed-output regulator is appropriate only when the downstream rail does not need power-level control. The LM3241 provides a confirmed 0.6 V to 3.4 V adjustable range from a 2.7 V to 5.5 V input.
What can replace LM3241TLE/DRSN?
A valid replacement must use the same TLE footprint, match pin assignments, and remain within the LM3241TLE/DRSN key electrical limits of 2.7 V to 5.5 V input, 0.6 V to 3.4 V output, and 750 mA current capability. The available cross-reference search identifies comparison tools but does not confirm additional part-specific drop-in equivalents.
What are the key specifications of LM3241TLE/DRSN?
The key specifications are a 2.7 V to 5.5 V input range, an adjustable 0.6 V to 3.4 V output range, 6 MHz switching frequency, 750 mA output-current capability, and VCON analog power control. The Texas Instruments LM3241 product page positions the converter for RF power amplifiers powered from one lithium-ion cell.

کے لیے انجینئرنگ ریفرنس ڈیٹا LM3241TLE/DRSN — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the LM3241TLE/DRSN when powering an RF power amplifier from a single-cell source and when the supply level must vary through the VCON analog control input. Its confirmed 2.7 V to 5.5 V input range, 0.6 V to 3.4 V adjustable output, 6 MHz switching frequency, and 750 mA capability align with compact mobile and portable RF designs. The LM3241TLE is the closest confirmed same-family designation and may suit a different order or delivery format, but verify the manufacturer ordering table before substitution. If the load does not require dynamic voltage control, a simpler fixed-output regulator may reduce control complexity. If the required rail exceeds 3.4 V, input falls outside 2.7 V to 5.5 V, or output current exceeds 750 mA, select a converter with a wider electrical envelope and an explicitly verified footprint.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ LM3241TLE
Package TLE surface-mount package TLE surface-mount package
Brand Texas Instruments Texas Instruments
Product Type Adjustable step-down DC-DC converter Adjustable step-down DC-DC converter
Input Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V
Adjustable Output Voltage Range 0.6 V to 3.4 V 0.6 V to 3.4 V
Switching Frequency 6 MHz 6 MHz
Maximum Output Current 750 mA 750 mA
Control Method VCON analog input VCON analog input
Primary Application RF power amplifier supply RF power amplifier supply

اہم امتیازی خصوصیات

  • Integrated analog RF power control (بمقابلہLM3241TLE)
  • Single-cell RF supply capability (بمقابلہLM3241TLE)
  • Compact high-frequency conversion (بمقابلہLM3241TLE)

ڈیزائن نوٹس

Use the manufacturer application circuit as the layout baseline. Place the input capacitor, switching node, inductor, and output capacitor in a compact arrangement, and keep the high-current switching loop physically small. Route the VCON signal away from the switching node to reduce coupling. A short ground return and carefully placed decoupling capacitors help control output ripple and electromagnetic interference.

Select the inductor and capacitors using the Texas Instruments LM3241 datasheet rather than generic values. Check inductor saturation current against the converter operating current plus ripple, and verify capacitor voltage and ripple-current ratings. The device supports up to 750 mA, but the usable load also depends on the selected components, input voltage, output voltage, and thermal conditions.

Estimate converter losses at the intended input voltage, output voltage, and load before committing to the board layout. Account for conduction loss, switching loss, inductor resistance, and capacitor ESR, then provide copper area and thermal vias appropriate to the TLE package. Validate the hottest operating case with actual airflow, enclosure temperature, and the production PCB stack-up.

Do not treat the VCON pin as a fixed logic enable. It is an analog control input used to regulate RF power-amplifier power and efficiency, with an overall adjustable output range of 0.6 V to 3.4 V. Follow the manufacturer control-circuit and compensation guidance, and check startup behavior when the RF amplifier or control network is connected.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The verified manufacturer information confirms the electrical specifications and applications but does not state the requested compliance details.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-09 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

LM3241TLE/DRSN datasheet LM3241TLE/DRSN pinout LM3241TLE/DRSN datasheet pdf LM3241TLE/DRSN equivalent LM3241TLE/DRSN replacement LM3241TLE/DRSN footprint LM3241TLE/DRSN price LM3241TLE/DRSN stock Texas Instruments LM3241TLE/DRSN LM3241 750mA step-down converter LM3241 RF power amplifier supply LM3241TLE vs LM3241TLE/DRSN

متعلقہ اجزاء اور اصطلاحات

Texas Instruments LM3241TLE/DRSN LM3241TLE LM3241 step-down DC-DC converter switching regulator voltage regulator power management IC RF power amplifier VCON analog input single lithium-ion cell 2.7 V to 5.5 V input 0.6 V to 3.4 V output 6 MHz switching frequency 750 mA output current TLE surface-mount package surface mount SMD RoHS REACH AEC-Q100 mobile phones portable communicators battery-powered RF devices
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں