LM324DTB - 4-Channel 3-32V Op Amp | onsemi
MPN: LM324DTB ✓ فعالLM324DTB جائزہ
An operational amplifier is an active analog signal-processing component that amplifies the voltage difference between its inverting and non-inverting inputs. A quad operational amplifier contains four amplifier sections in one package, reducing component count and simplifying multi-channel designs. Within the broader hierarchy, the LM324 belongs to the operational-amplifier family within analog and mixed-signal semiconductors, commonly used for amplification, filtering, comparison, and feedback control.
The LM324 family is optimized for economical single-supply operation. Its broad 3 V to 32 V supply range permits use in low-voltage 3 V systems as well as higher-voltage industrial rails. True differential inputs support conventional non-inverting and inverting amplifier configurations, while four independent amplifier sections allow consistent signal paths across multiple channels. The specified 5 mV input offset voltage is appropriate for general-purpose rather than precision instrumentation applications.
This onsemi implementation is identified as a standard general-purpose amplifier in a 14-TSSOP package. The surface-mount package reduces board area compared with a through-hole 14-pin package, while four circuits in one package can simplify routing when the design includes several similar analog channels. The TSSOP lead pitch requires careful PCB layout, particularly for input routing, bypassing, and exposed thermal management around the device.
Typical uses include sensor-signal conditioning, low-side current monitoring, audio and communications interfaces, general feedback loops, active filtering, and industrial control modules. In each case, the amplifier's input bias current, common-mode range, output swing, stability behavior, and operating voltage should be checked against the actual signal and load requirements before the circuit is finalized.
A key design consideration is input common-mode range. The LM324 does not behave like a rail-to-rail input amplifier, so input and output signals must remain within the usable linear region of the selected supply voltage. Input and output bypassing capacitors should be placed close to the appropriate device pins, and sensitive signal traces should be kept away from switching nodes and high-current return paths.
This product page organizes the LM324DTB supply range, package information, pin assignment, equivalent-device considerations, and practical analog-layout guidance into a design-oriented reference. It also supports faster sourcing by linking engineers to the Request a Quote form for current commercial availability, volume information, and production requirements.
کے لیے ڈراپ اِن متبادل LM324DTB — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں LM324DTB (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Input Offset Voltage.
LM324APW
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
LM324DTB زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Amplifier Type | General-purpose operational amplifier |
| Number of Amplifier Circuits | 4 circuits |
| Supply Voltage Range | 3 V to 32 V |
| Input Offset Voltage | 5 mV |
| Input Type | True differential inputs |
| Supply Type | Single supply |
| پیکیج | 14-pin TSSOP |
| ماؤنٹنگ ٹائپ | Surface mount |
LM324DTB پن کنفیگریشن
| پن 1 | OUT1 — Amplifier 1 output |
| پن 2 | IN1- — Amplifier 1 inverting input |
| پن 3 | IN1+ — Amplifier 1 non-inverting input |
| پن 4 | V+ — Positive supply voltage |
| پن 5 | IN2+ — Amplifier 2 non-inverting input |
| پن 6 | IN2- — Amplifier 2 inverting input |
| پن 7 | OUT2 — Amplifier 2 output |
| پن 8 | OUT3 — Amplifier 3 output |
| پن 9 | IN3- — Amplifier 3 inverting input |
| پن 10 | IN3+ — Amplifier 3 non-inverting input |
| پن 11 | V- — Ground or negative supply connection |
| پن 12 | IN4+ — Amplifier 4 non-inverting input |
| پن 13 | IN4- — Amplifier 4 inverting input |
| پن 14 | OUT4 — Amplifier 4 output |
عام استعمالات
LM324DTB کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor Signal Conditioning, Low-Side Current Monitoring, Audio Preamplifier and Buffering, Communications Interface Buffering, Active Filtering and Control Loops, Portable and Battery-Powered Equipment.
Industrial Sensor Signal Conditioning
The LM324DTB suits industrial sensor modules that need several amplified or buffered channels in a compact footprint. Its four true-differential-input amplifier sections can process outputs from resistive, resistive-divider, and low-level voltage sensors while operating from a 3 V to 32 V supply. In a typical implementation, one section buffers the sensor output and another drives an ADC input or control comparator. The 5 mV input offset specification is generally suitable for general-purpose conditioning rather than precision metrology. Confirm the sensor output range against the amplifier input common-mode limits, place bypass capacitors near the supply pins, and route the sensor trace away from motors, relays, and switching power stages.
تجویز کردہ
Low-Side Current Monitoring
The LM324DTB can form the input stage of a low-side current-monitoring circuit when a small shunt voltage must be amplified above an ADC or measurement-controller input range. Its four channels allow the same board to amplify the shunt signal, provide an offset or reference buffer, and support additional gain or filtering stages. Operation from 3 V to 32 V makes the device adaptable to both compact low-voltage equipment and industrial rails. The design must keep the shunt voltage within the input common-mode range, verify that the 5 mV input offset is acceptable for the required measurement resolution, and use Kelvin-style routing where shunt resistance and trace resistance could otherwise introduce error.
تجویز کردہ
Audio Preamplifier and Buffering
The LM324DTB can provide inexpensive gain and buffering in line-level audio modules, active crossover prototypes, and low-cost mixer interfaces. Its four amplifier sections support multiple buffer or gain paths, while the 14-pin TSSOP package helps reduce board area compared with discrete single or dual devices. The device is best suited to general-purpose audio paths where the specified 5 mV input offset and limited input common-mode range are acceptable. In a practical circuit, use one section as a non-inverting preamplifier, bypass the supply pins locally, and keep input and output return paths separated to reduce hum and oscillation risk.
تجویز کردہ
Communications Interface Buffering
The LM324DTB is applicable to low-speed communications and interface modules that need level buffering, impedance isolation, or gain around a control signal. Four sections can handle transmit-enable conditioning, receive buffering, and auxiliary analog channels without requiring four separate packages. The broad 3 V to 32 V supply capability supports industrial interface boards, while the 5 mV input offset is generally acceptable for control and communication signals rather than precision measurement channels. Validate output drive against the connected load, maintain valid common-mode levels for transmitted and received signals, and isolate high-speed edges from sensitive analog traces to minimize coupling.
تجویز کردہ
Active Filtering and Control Loops
The LM324DTB can implement first-order active filters, error amplifiers, and feedback-control blocks where four repeated analog channels are advantageous. A single package can form two Sallen-Key stages, a summing amplifier, and a monitoring buffer, reducing board area and simplifying ground strategy. Because this is a general-purpose amplifier, the engineer should verify bandwidth, slew rate, output swing, and stability at the intended closed-loop gain before finalizing filter poles or loop compensation. Keep feedback components close to their associated amplifier pins and provide local supply bypassing to prevent output noise and oscillation from destabilizing the control loop.
تجویز کردہ
Portable and Battery-Powered Equipment
The LM324DTB is appropriate for battery-powered or portable modules when several low-frequency analog channels must operate from a modest supply. Its 3 V minimum operating voltage permits use near common single-cell system rails, and integrating four amplifiers into one 14-pin TSSOP reduces component count. Typical roles include sensor conditioning, battery-current monitoring, and control-signal buffering. Because quiescent current contributes directly to battery drain, confirm the no-load and loaded current requirements for the operating mode. Avoid using a quiescent operating point that prevents the requested battery life, and ensure shutdown or load-switching arrangements do not create transients outside the device's operating limits.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا LM324DTB — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | LM324APW |
|---|---|---|
| Brand | onsemi | Texas Instruments |
| Package | 14-pin TSSOP | 14-pin TSSOP |
| Amplifier Count | 4 circuits | 4 circuits |
| Input Offset Voltage | 5 mV | 5 mV |
| Input Configuration | True differential inputs | True differential inputs |
| Supply Configuration | Single supply | Single supply |
| Mounting Type | Surface mount | Surface mount |
اہم امتیازی خصوصیات
- Four amplifiers in a compact 14-pin TSSOP (بمقابلہLM324APW)
- Broad single-supply operating range (بمقابلہLM324APW)
- General-purpose accuracy positioning (بمقابلہLM324APW)
ڈیزائن نوٹس
Route all four input and feedback networks away from switching nodes, inductors, and high-current supply traces. Place input-biasing, feedback, gain-setting, and compensation components close to their associated amplifier pins. The narrow TSSOP lead pitch makes short feedback loops essential for preventing parasitic inductance, oscillation, and unexpected bandwidth changes.
Place the supply bypass capacitor immediately between pin 4, V+, and pin 11, V-, with the shortest possible traces. Use a low-inductance ceramic capacitor for high-frequency bypass and add bulk decoupling near the device when the supply source is remote. Confirm that the selected supply voltage and signal levels satisfy both the 3 V to 32 V operating range and the amplifier's input common-mode and output-swing limits.
Do not treat the LM324DTB as a rail-to-rail input or output amplifier merely because it supports single-supply operation. Check the input and output voltage limits at the actual supply voltage, especially for signals approaching either rail. Also review offset error for precision paths: the specified 5 mV input offset is appropriate for general-purpose amplification but may be too large for high-resolution sensing.
For instrumentation-style signal paths, connect the input source close to the amplifier and use a return conductor that does not share a noisy high-current path. Guard or shield sensitive inputs where cable pickup is significant, and avoid creating long high-impedance nodes between the sensor and pin 2, 3, 5, 6, 9, 10, 12, or 13. Stable impedance and short physical loops help reduce RF pickup and unintended oscillation.
تعمیل کی معلومات
Compliance attributes require confirmation from the current onsemi product documentation or a project-specific material declaration.