onsemi

LM324DTB - 4-Channel 3-32V Op Amp | onsemi

MPN: LM324DTB ✓ Hoạt động
3 V to 32 V Vdss 14-pin TSSOP Package
MOQ: 1 |

LM324DTB Tóm tắt

onsemi LM324DTB is a four-circuit, general-purpose operational amplifier designed for single-supply operation in a 14-pin TSSOP package. Its 3 V to 32 V operating range, 5 mV input offset voltage, true differential inputs, and four amplifiers in one package make it useful for general-purpose signal conditioning, voltage buffering, feedback control, and low-to-moderate-precision analog circuits.

An operational amplifier is an active analog signal-processing component that amplifies the voltage difference between its inverting and non-inverting inputs. A quad operational amplifier contains four amplifier sections in one package, reducing component count and simplifying multi-channel designs. Within the broader hierarchy, the LM324 belongs to the operational-amplifier family within analog and mixed-signal semiconductors, commonly used for amplification, filtering, comparison, and feedback control.

The LM324 family is optimized for economical single-supply operation. Its broad 3 V to 32 V supply range permits use in low-voltage 3 V systems as well as higher-voltage industrial rails. True differential inputs support conventional non-inverting and inverting amplifier configurations, while four independent amplifier sections allow consistent signal paths across multiple channels. The specified 5 mV input offset voltage is appropriate for general-purpose rather than precision instrumentation applications.

This onsemi implementation is identified as a standard general-purpose amplifier in a 14-TSSOP package. The surface-mount package reduces board area compared with a through-hole 14-pin package, while four circuits in one package can simplify routing when the design includes several similar analog channels. The TSSOP lead pitch requires careful PCB layout, particularly for input routing, bypassing, and exposed thermal management around the device.

Typical uses include sensor-signal conditioning, low-side current monitoring, audio and communications interfaces, general feedback loops, active filtering, and industrial control modules. In each case, the amplifier's input bias current, common-mode range, output swing, stability behavior, and operating voltage should be checked against the actual signal and load requirements before the circuit is finalized.

A key design consideration is input common-mode range. The LM324 does not behave like a rail-to-rail input amplifier, so input and output signals must remain within the usable linear region of the selected supply voltage. Input and output bypassing capacitors should be placed close to the appropriate device pins, and sensitive signal traces should be kept away from switching nodes and high-current return paths.

This product page organizes the LM324DTB supply range, package information, pin assignment, equivalent-device considerations, and practical analog-layout guidance into a design-oriented reference. It also supports faster sourcing by linking engineers to the Request a Quote form for current commercial availability, volume information, and production requirements.

Bộ thay thế dễ dàng lắp đặt cho LM324DTB — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LM324DTB (cùng hình factor và footprint) — khác nhau ở Input Offset Voltage.

onsemi
Input Offset Voltage: 3 mV
So sánh với LM324DTB →
onsemi
Input Offset Voltage: 5 mV maximum
So sánh với LM324DTB →

LM324APW

✅ Drop-In
📦 14-pin TSSOP
Same 14-pin TSSOP footprint and quad LM324 function; input offset is 5 mV for both, while manufacturer-specific electrical limits may differ.

📋 Tham chiếu thay thế (không có trong danh mục)

LM324DTB Tỷ lệ tối đa & tính chất điện

Amplifier Type General-purpose operational amplifier
Number of Amplifier Circuits 4 circuits
Supply Voltage Range 3 V to 32 V
Input Offset Voltage 5 mV
Input Type True differential inputs
Supply Type Single supply
Hộp 14-pin TSSOP
Kiểu lắp đặt Surface mount

Cấu hình chân LM324DTB

TSSOP-14 (4.4mm) Package Pinout Diagram TSSOP-14 4.4x5mm, P0.65mm, JEDEC MO-153. 14-pin thin shrink. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 TSSOP-14 (4.4mm)
Chân 1 OUT1 — Amplifier 1 output
Chân 2 IN1- — Amplifier 1 inverting input
Chân 3 IN1+ — Amplifier 1 non-inverting input
Chân 4 V+ — Positive supply voltage
Chân 5 IN2+ — Amplifier 2 non-inverting input
Chân 6 IN2- — Amplifier 2 inverting input
Chân 7 OUT2 — Amplifier 2 output
Chân 8 OUT3 — Amplifier 3 output
Chân 9 IN3- — Amplifier 3 inverting input
Chân 10 IN3+ — Amplifier 3 non-inverting input
Chân 11 V- — Ground or negative supply connection
Chân 12 IN4+ — Amplifier 4 non-inverting input
Chân 13 IN4- — Amplifier 4 inverting input
Chân 14 OUT4 — Amplifier 4 output

Ứng dụng tiêu biểu

LM324DTB phù hợp cho 6 Áp dụngs: Industrial Sensor Signal Conditioning, Low-Side Current Monitoring, Audio Preamplifier and Buffering, Communications Interface Buffering, Active Filtering and Control Loops, Portable and Battery-Powered Equipment.

🏭

Industrial Sensor Signal Conditioning

The LM324DTB suits industrial sensor modules that need several amplified or buffered channels in a compact footprint. Its four true-differential-input amplifier sections can process outputs from resistive, resistive-divider, and low-level voltage sensors while operating from a 3 V to 32 V supply. In a typical implementation, one section buffers the sensor output and another drives an ADC input or control comparator. The 5 mV input offset specification is generally suitable for general-purpose conditioning rather than precision metrology. Confirm the sensor output range against the amplifier input common-mode limits, place bypass capacitors near the supply pins, and route the sensor trace away from motors, relays, and switching power stages.

⚡

Low-Side Current Monitoring

The LM324DTB can form the input stage of a low-side current-monitoring circuit when a small shunt voltage must be amplified above an ADC or measurement-controller input range. Its four channels allow the same board to amplify the shunt signal, provide an offset or reference buffer, and support additional gain or filtering stages. Operation from 3 V to 32 V makes the device adaptable to both compact low-voltage equipment and industrial rails. The design must keep the shunt voltage within the input common-mode range, verify that the 5 mV input offset is acceptable for the required measurement resolution, and use Kelvin-style routing where shunt resistance and trace resistance could otherwise introduce error.

🎧

Audio Preamplifier and Buffering

The LM324DTB can provide inexpensive gain and buffering in line-level audio modules, active crossover prototypes, and low-cost mixer interfaces. Its four amplifier sections support multiple buffer or gain paths, while the 14-pin TSSOP package helps reduce board area compared with discrete single or dual devices. The device is best suited to general-purpose audio paths where the specified 5 mV input offset and limited input common-mode range are acceptable. In a practical circuit, use one section as a non-inverting preamplifier, bypass the supply pins locally, and keep input and output return paths separated to reduce hum and oscillation risk.

🌐

Communications Interface Buffering

The LM324DTB is applicable to low-speed communications and interface modules that need level buffering, impedance isolation, or gain around a control signal. Four sections can handle transmit-enable conditioning, receive buffering, and auxiliary analog channels without requiring four separate packages. The broad 3 V to 32 V supply capability supports industrial interface boards, while the 5 mV input offset is generally acceptable for control and communication signals rather than precision measurement channels. Validate output drive against the connected load, maintain valid common-mode levels for transmitted and received signals, and isolate high-speed edges from sensitive analog traces to minimize coupling.

🔧

Active Filtering and Control Loops

The LM324DTB can implement first-order active filters, error amplifiers, and feedback-control blocks where four repeated analog channels are advantageous. A single package can form two Sallen-Key stages, a summing amplifier, and a monitoring buffer, reducing board area and simplifying ground strategy. Because this is a general-purpose amplifier, the engineer should verify bandwidth, slew rate, output swing, and stability at the intended closed-loop gain before finalizing filter poles or loop compensation. Keep feedback components close to their associated amplifier pins and provide local supply bypassing to prevent output noise and oscillation from destabilizing the control loop.

📱

Portable and Battery-Powered Equipment

The LM324DTB is appropriate for battery-powered or portable modules when several low-frequency analog channels must operate from a modest supply. Its 3 V minimum operating voltage permits use near common single-cell system rails, and integrating four amplifiers into one 14-pin TSSOP reduces component count. Typical roles include sensor conditioning, battery-current monitoring, and control-signal buffering. Because quiescent current contributes directly to battery drain, confirm the no-load and loaded current requirements for the operating mode. Avoid using a quiescent operating point that prevents the requested battery life, and ensure shutdown or load-switching arrangements do not create transients outside the device's operating limits.

What is the LM324DTB?
The LM324DTB is an onsemi four-channel general-purpose operational amplifier for single-supply systems operating from 3 V to 32 V. According to the onsemi LM324DTB datasheet, the device provides true differential inputs, a specified input offset voltage of 5 mV, and four amplifier circuits in a 14-pin TSSOP package. It is suited to buffering, amplification, feedback control, and general analog signal-conditioning applications where a low-cost integrated quad amplifier is preferred over four discrete devices.
What is the LM324DTB datasheet PDF?
The LM324DTB datasheet is available from the onsemi document indexed for this exact 14-TSSOP orderable part. The manufacturer document describes the LM324 series as low-cost, four-channel operational amplifiers with true differential inputs and emphasizes their suitability for single-supply applications. Use the onsemi document to confirm the final pin description, electrical limits, recommended operating conditions, and package drawings before releasing a production schematic or PCB footprint.
Where can I find the LM324DTB pinout?
The LM324DTB pinout is shown in the onsemi datasheet under the pin-description information for the 14-pin TSSOP package. Pins 1 and 7 are the first two amplifier outputs, pins 14 and 8 are the third and fourth outputs, pins 3 and 2 form the first amplifier input pair, and the remaining amplifier input pairs occupy pins 5, 6, 9, 10, 12, and 13. Pins 4 and 11 provide the positive supply and ground connections.
What is the LM324DTB supply voltage range?
The LM324DTB operates from 3 V to 32 V as a single-supply amplifier. According to the manufacturer datasheet information for LM324DTB, this range supports low-voltage 3 V systems and higher-voltage industrial supply arrangements. The selected supply must also maintain the input and output voltages inside the amplifier's linear operating region; the 3 V to 32 V rating alone does not make the LM324 a rail-to-rail operational amplifier.
What are the key specifications of LM324DTB that engineers should know?
The key LM324DTB specifications are four amplifier circuits, a 3 V to 32 V single-supply range, 5 mV input offset voltage, true differential inputs, and a 14-pin TSSOP package. These values place the part in the general-purpose amplifier category and make it suitable for multi-channel buffering and feedback-control circuits. Exact bandwidth, slew rate, bias current, common-mode range, output swing, and thermal limits should be taken from the onsemi datasheet for the production design.
Can the LM324DTB operate from a 5 V supply?
Yes, 5 V falls within the LM324DTB's stated 3 V to 32 V single-supply operating range. The device therefore supports conventional 5 V analog systems without requiring the higher supply used by some industrial designs. Signal amplitudes must still remain within the input common-mode and output-swing limits for 5 V operation, and the power-supply and bypass network should be designed according to the manufacturer recommendations.
What can replace the LM324DTB?
The closest confirmed drop-in replacement is the TI LM324APW, which uses the same 14-pin TSSOP package and the same quad LM324 architecture. Both devices provide four general-purpose amplifiers and a nominal 5 mV input offset voltage. However, a footprint match alone does not guarantee identical behavior across every temperature, load, input-bias, and supply condition, so compare the complete manufacturer electrical tables before substitution.
Is the LM324DTB the same as the LM324APW?
The LM324DTB and TI LM324APW are closely related 14-pin TSSOP quad operational amplifiers intended for general-purpose single-supply operation. The LM324DTB is the onsemi orderable part, while the LM324APW is the TI package suffix for its TSSOP version. Both use the standard quad-amplifier arrangement, but production substitution should still account for manufacturer-specific electrical limits, test methods, quality status, and documentation.
Is LM324DTB suitable for sensor signal conditioning?
The LM324DTB is suitable for many low-to-moderate-precision sensor signal-conditioning applications because it offers four true-differential-input amplifiers, a 5 mV input offset specification, and operation from 3 V to 32 V. It is particularly appropriate when several channels must amplify or buffer sensor outputs in one compact package. Verify the sensor output range, source impedance, required bandwidth, common-mode limits, and permissible offset error against the circuit requirements.
LM324DTB vs LM324APW: which is better for an industrial control module?
The LM324DTB is the better direct choice when the design has been qualified around the onsemi device and its 14-pin TSSOP documentation and supply chain. The TI LM324APW is a strong footprint-compatible alternative when procurement flexibility is more important. Because both devices implement four general-purpose LM324-class amplifiers, the decisive comparison is the complete electrical specification, qualification status, operating-temperature grade, and lifecycle commitment rather than the package alone.
When should I choose LM324DTB instead of a dual operational amplifier?
Choose the LM324DTB when the circuit needs four general-purpose amplifier channels and can benefit from one package instead of two dual packages. Its 14-pin TSSOP footprint, 3 V to 32 V supply range, and true differential inputs suit signal conditioning, buffering, and feedback applications. Choose a dual amplifier instead when only two channels are required, channel count is odd, or per-amplifier features such as higher precision, faster response, rail-to-rail inputs, or independent shutdown are needed.
What is the best drop-in replacement for LM324DTB?
The TI LM324APW is the best directly supported drop-in candidate because it uses the same 14-pin TSSOP package and provides the same four-channel, general-purpose LM324 function. The LM324DTB remains the onsemi-specific choice if its electrical limits and qualification data are already incorporated into the design. Validate the complete input offset, bias current, common-mode range, output swing, noise, stability, and temperature specifications rather than relying only on pin compatibility.
What is the best onsemi equivalent for LM324DTB?
The onsemi LM324DTB is itself the specifically identified 14-TSSOP LM324 orderable part, so the manufacturer LM324DT family is the natural starting point for an onsemi-sourced equivalent. Any alternate onsemi order code must be checked for the same TSSOP footprint, electrical ratings, and delivery format. Packaging-only order codes do not create a meaningful engineering alternative, so current commercial conditions for the exact LM324DTB should be requested through the Request a Quote form on this page.
Where can I buy LM324DTB online?
The Request a Quote form on this page is the preferred route for requesting LM324DTB commercial availability, volume pricing, lead time, and packaging requirements. The part is identified as an onsemi 14-pin TSSOP general-purpose quad operational amplifier, so a quote response should include the exact LM324DTB order code and the required quantity. This avoids selecting a related LM324 variant with a different package, temperature grade, or delivery format.
What is the price and lead time for LM324DTB?
Use the Request a Quote form on this page for the current LM324DTB price, stock position, minimum order quantity, and production lead time. Commercial terms can change with volume, date, package format, and manufacturing demand, so a quote is more useful than a static figure for an active production component. Include the required order quantity, target date, and whether reels, tubes, or another permitted delivery format are needed.
Is LM324DTB in stock?
Current LM324DTB inventory should be confirmed through the Request a Quote form on this page by entering the required quantity and target delivery date. Because stock levels and lead times vary by order volume and date, the most reliable answer comes from a current quote response. Request the exact onsemi LM324DTB order code and clearly identify any required packaging format to avoid receiving a different LM324 package variant.

Dữ liệu tham khảo kỹ thuật cho LM324DTB — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the onsemi LM324DTB when the design needs four general-purpose amplifier channels, a 3 V to 32 V single-supply range, and a compact 14-pin TSSOP footprint. Select the TI LM324APW when a documented 14-pin TSSOP cross-manufacturer alternative is needed for procurement flexibility, after checking the complete electrical specifications. Keep the LM324DTB when the PCB and qualification files already reference onsemi, avoiding an unnecessary requalification of the amplifier source. Do not choose a 14-pin SOIC device as a direct replacement because its footprint differs, and do not select the LM358 or LM2904 because each contains only two amplifiers. For precision or high-speed designs, compare the LM324 family against amplifier specifications for input bias current, bandwidth, slew rate, output swing, noise, and stability rather than relying on the LM324 name alone.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này LM324APW
Brand onsemi Texas Instruments
Package 14-pin TSSOP 14-pin TSSOP
Amplifier Count 4 circuits 4 circuits
Input Offset Voltage 5 mV 5 mV
Input Configuration True differential inputs True differential inputs
Supply Configuration Single supply Single supply
Mounting Type Surface mount Surface mount

Bảo phân biệt quan trọng

  • Four amplifiers in a compact 14-pin TSSOP (vsLM324APW)
  • Broad single-supply operating range (vsLM324APW)
  • General-purpose accuracy positioning (vsLM324APW)

Ghi chú thiết kế

Route all four input and feedback networks away from switching nodes, inductors, and high-current supply traces. Place input-biasing, feedback, gain-setting, and compensation components close to their associated amplifier pins. The narrow TSSOP lead pitch makes short feedback loops essential for preventing parasitic inductance, oscillation, and unexpected bandwidth changes.

Place the supply bypass capacitor immediately between pin 4, V+, and pin 11, V-, with the shortest possible traces. Use a low-inductance ceramic capacitor for high-frequency bypass and add bulk decoupling near the device when the supply source is remote. Confirm that the selected supply voltage and signal levels satisfy both the 3 V to 32 V operating range and the amplifier's input common-mode and output-swing limits.

Do not treat the LM324DTB as a rail-to-rail input or output amplifier merely because it supports single-supply operation. Check the input and output voltage limits at the actual supply voltage, especially for signals approaching either rail. Also review offset error for precision paths: the specified 5 mV input offset is appropriate for general-purpose amplification but may be too large for high-resolution sensing.

For instrumentation-style signal paths, connect the input source close to the amplifier and use a return conductor that does not share a noisy high-current path. Guard or shield sensitive inputs where cable pickup is significant, and avoid creating long high-impedance nodes between the sensor and pin 2, 3, 5, 6, 9, 10, 12, or 13. Stable impedance and short physical loops help reduce RF pickup and unintended oscillation.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Compliance attributes require confirmation from the current onsemi product documentation or a project-specific material declaration.

Dữ liệu được xác minh vào: 2026-11-13 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

lm324dt datasheet LM324DTB datasheet LM324DTB pinout LM324DTB datasheet pdf LM324DTB equivalent LM324DTB replacement LM324DTB TSSOP footprint LM324DTB price LM324DTB stock onsemi LM324DTB LM324DTB vs LM324APW LM324DTB sensor amplifier

Các bộ phận và thuật ngữ liên quan

onsemi LM324DTB LM324APW Texas Instruments quad operational amplifier general-purpose amplifier single-supply operational amplifier true differential input input offset voltage input common-mode range feedback control signal conditioning 14-pin TSSOP TSSOP package family surface-mount package analog semiconductor 3 V to 32 V supply 5 mV input offset industrial sensor interface low-side current monitoring audio preamplifier active filter RoHS REACH AEC-Q100
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ