Texas Instruments

LM339M/NOPB - Low-Power Quad Comparator | Texas Instruments

MPN: LM339M/NOPB ✓ فعال
14-pin SOIC (D) Package
MOQ: 1 |

LM339M/NOPB جائزہ

The Texas Instruments LM339M/NOPB is a low-power, low-offset-voltage quad differential comparator containing four independent comparator channels in a 14-pin SOIC package. Each channel compares two input voltages and provides an open-collector output suitable for driving TTL, MOS, and CMOS-compatible logic. The device is designed for general-purpose signal conditioning, threshold detection, and open-collector bus interfacing.

A comparator is an analog integrated circuit that determines whether one input voltage is higher or lower than another. Rather than amplifying the difference into a linear output, it produces a digital decision at its output. The LM339 belongs to the comparator hierarchy within analog and mixed-signal integrated circuits, providing four conversion elements in one package and reducing component count compared with discrete single comparators.

The key characteristics of LM339M/NOPB include four comparator channels, an open-collector output stage, a 14-pin SOIC package, and a commercial operating-temperature range of 0°C to 70°C. Open-collector outputs allow multiple comparator outputs to share a wired bus when each output has an appropriate pull-up resistor. This architecture is useful in window detectors, level alarms, sensor interfaces, relay-control circuits, and low-voltage logic threshold systems.

The four channels are electrically independent, allowing each comparator to monitor a different threshold while sharing the same supply pins. Because the outputs are open collector, external pull-up components are required when a logic-high output is needed. The collector output also provides flexibility for selecting a pull-up voltage independently of the comparator supply voltage, subject to the device absolute-maximum and operating limits defined by the manufacturer.

Typical implementations compare a sensor output against a reference voltage, detect overvoltage or undervoltage conditions, or translate an analog threshold into a logic event. The open-collector architecture is particularly useful when multiple comparators must indicate a shared fault. Designers should also account for input offset, input bias current, supply-current requirements, output pull-up resistance, and the switching behavior associated with the bipolar comparator topology.

For a new PCB, place the device close to the signals being compared and maintain a continuous ground reference. Use stable decoupling from the supply pins to ground and route the pull-up resistors away from sensitive analog inputs. For an existing 14-SOIC design, verify the replacement’s offset voltage, supply range, output architecture, input common-mode range, and propagation delay before approving a substitution.

This product page combines package and functional details, replacement guidance, application-specific design considerations, and a parameter-by-parameter comparison. It also distinguishes true SOIC drop-in options from similarly named parts that use incompatible packages, helping engineers shorten qualification time without overlooking electrical differences.

کے لیے ڈراپ اِن متبادل LM339M/NOPB — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں LM339M/NOPB (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Comparator Type, Logic Compatibility, Output Type, Package, Number of Comparators.

Texas Instruments
Output Type: Open-Collector (DTL, TTL, MOS, CMOS compatible)
Package: 14-SOIC (0.154 in, 3.90 mm width)
Number of Comparators: 4
onsemi
Comparator Type: 4-channel general-purpose analog comparator
Logic Compatibility: CMOS, TTL, and MOS
Package: 14-pin SOIC
Texas Instruments
Comparator Type: Differential, general purpose
Logic Compatibility: TTL, MOS, and CMOS
Texas Instruments
Comparator Type: Quad differential voltage comparator
Logic Compatibility: Open-collector external pull-up interface
Output Type: Open-collector

LM339M

✅ ڈراپ-اِن
Texas Instruments
📦 14-SOIC
Quad differential voltage comparator · 4 independent comparators · 2 V to 36 V · ±1 V to ±18 V · 1.3 µs · 800 µA typical · 25 nA typical · Open-collector

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LMV339M/NOPB

✅ ڈراپ-اِن
📦 14-SOIC
Same 14-SOIC footprint, but CMOS input architecture replaces the bipolar LM339 input characteristics; exact numeric deviations require datasheet comparison.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LM339M

✅ ڈراپ-اِن
Texas Instruments
📦 14-SOIC
Quad differential voltage comparator · 4 independent comparators · 2 V to 36 V · ±1 V to ±18 V · 1.3 µs · 800 µA typical · 25 nA typical · Open-collector

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM339DG

✅ ڈراپ-اِن
onsemi
📦 14-SOIC
4-channel general-purpose analog comparator · 4 channels · 3 V to 36 V · 25 nA · 5 nA · 0.8 mA · Open collector · CMOS, TTL, and MOS

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM339M/NOPB زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Comparator Type Standard general-purpose differential comparator
Number of Channels 4 channels
آؤٹ پٹ کی قسم Open collector
Logic Compatibility TTL, MOS, and CMOS compatible
پیکیج 14-pin SOIC (D)
پن کی تعداد 14 pins
آپریٹنگ درجہ حرارت رینج 0°C to 70°C
ماؤنٹنگ ٹائپ Surface mount

LM339M/NOPB پن کنفیگریشن

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
پن 1 OUT1 — Comparator 1 open-collector output
پن 2 IN1- — Comparator 1 inverting input
پن 3 IN1+ — Comparator 1 non-inverting input
پن 4 GND — Ground connection
پن 5 IN2+ — Comparator 2 non-inverting input
پن 6 IN2- — Comparator 2 inverting input
پن 7 OUT2 — Comparator 2 open-collector output
پن 8 OUT3 — Comparator 3 open-collector output
پن 9 IN3- — Comparator 3 inverting input
پن 10 IN3+ — Comparator 3 non-inverting input
پن 11 VCC — Positive supply connection
پن 12 IN4+ — Comparator 4 non-inverting input
پن 13 IN4- — Comparator 4 inverting input
پن 14 OUT4 — Comparator 4 open-collector output

عام استعمالات

LM339M/NOPB کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Threshold Detection, Open-Collector Alarm Bus, Sensor Signal Conditioning, Power-Supply Overvoltage Detection, Battery Charger Control, LED Lighting Control.

🏭

Industrial Threshold Detection

The LM339M/NOPB is appropriate for comparing a sensor or divided supply voltage against a reference threshold in industrial monitoring equipment. Its four independent channels can supervise multiple voltages while sharing one 14-SOIC footprint, reducing board area compared with four separate single comparators. The open-collector output can pull down an alarm line or drive an input rated for the selected pull-up voltage. Because the commercial device is specified for 0°C to 70°C, enclosure temperature must remain inside that range or a wider-temperature grade must be selected.

⚡

Open-Collector Alarm Bus

The four open-collector outputs of the LM339M/NOPB can monitor separate fault conditions and share a common wired-alarm line. Each comparator pulls the bus low when its condition is met, while a single pull-up resistor restores the logic-high state when no fault is active. This arrangement reduces the number of digital inputs required by a controller. Design the pull-up for the receiver’s logic thresholds and verify that every comparator channel remains within its specified common-mode and supply limits during startup and fault transients.

🧩

Sensor Signal Conditioning

The LM339M/NOPB can convert an analog sensor level into a clean threshold event for a microcontroller or control system. Its differential inputs allow a sensor signal to be compared with a stable reference, and the open-collector result can directly pull an interrupt or digital input low. Place the comparator near the protected analog domain to minimize noise pickup, and use a pull-up compatible with the digital rail. Stable reference generation and sensor grounding are as important as comparator selection because they directly determine the switching threshold and false-alarm behavior.

🔋

Power-Supply Overvoltage Detection

The LM339M/NOPB can supervise a divided power rail in an overvoltage or undervoltage detection circuit. Four channels provide flexibility for monitoring several rails or combining conditions, while the open-collector output can alert a system controller. The sensing network determines accuracy, so resistor tolerance and reference behavior should be included in the error budget. Also verify the comparator’s maximum supply and input voltages against the monitored rail, including transients that may exceed nominal operating conditions.

🔋

Battery Charger Control

In a simple charger-control circuit, the LM339M/NOPB can compare a battery or adapter voltage with a reference and control a switching element or status line. Four channels allow voltage and current thresholds to be monitored with one package. The open-collector output is useful for driving a pull-up-defined status signal or an external control stage, but it does not directly provide a regulated charger output. Thermal design, source impedance, filtering, and safe separation between charger and load paths must be handled by the surrounding circuit.

💡

LED Lighting Control

The LM339M/NOPB can compare a control signal with a reference and translate the result into an LED-driver enable or status indication. Open-collector outputs allow the indicator logic to use a pull-up rail selected independently from the comparator supply. Multiple channels can support threshold-based brightness bands, fault indication, or sequencing. Keep the LED current and switching node physically separated from the comparator inputs, and use the four channels only when each input remains inside the manufacturer’s specified common-mode and differential-input limits.

تجویز کردہ پروڈکٹس کا خلاصہ

LM2901 Wider-temperature LM339-family comparator استعمال ہوتا ہے: Industrial Threshold Detection, Power-Supply Overvoltage Detection LM239 Military-temperature comparator family استعمال ہوتا ہے: Industrial Threshold Detection LM339M/NOPB Texas Instruments استعمال ہوتا ہے: Open-Collector Alarm Bus, Sensor Signal Conditioning, Battery Charger Control, LED Lighting Control LMV339M/NOPB Lower-power quad-comparator alternative استعمال ہوتا ہے: Open-Collector Alarm Bus, Battery Charger Control LM339M Texas Instruments استعمال ہوتا ہے: Sensor Signal Conditioning, LED Lighting Control LM339B Improved B-version comparator family استعمال ہوتا ہے: Power-Supply Overvoltage Detection
What is the LM339M/NOPB and what does it do?
The LM339M/NOPB is a four-channel differential comparator that converts the relationship between two analog input voltages into open-collector logic outputs. Each of its four channels operates independently, while all channels share the same supply pins. According to the Texas Instruments LM339 product documentation, it is intended for general-purpose comparison, threshold detection, and open-collector interfacing.
What package does LM339M/NOPB use?
The LM339M/NOPB uses a 14-pin SOIC package designated D by Texas Instruments. The package has 14 numbered pins, including the four comparator inputs, four outputs, supply connection, and ground connection. Its 14-SOIC format differs from the similarly named LM339N, which uses a through-hole package and therefore cannot replace this part without PCB changes.
Where can I download the LM339M datasheet PDF?
The LM339M/NOPB technical documentation is available through the official Texas Instruments LM339 product page at https://www.ti.com/product/LM339. That page provides the manufacturer’s data sheet and product information for the LM339 family. For board-level work, use the pin-description table in the manufacturer data sheet and confirm that the selected ordering suffix corresponds to the 14-pin SOIC package.
Where can I find the LM339M pinout?
The LM339M pinout is documented in the Texas Instruments LM339 data sheet linked from the official product page. Pin 1 identifies comparator 1 output, pins 2 and 3 are its inverting and non-inverting inputs, and the four channels occupy pins 1 through 10 and 12 through 14. Pin 11 is the positive supply connection and pin 4 is ground. Use the data-sheet pin table when assigning PCB nets.
Why does LM339M/NOPB need a pull-up resistor?
Each LM339M/NOPB output uses an open-collector transistor, so the device actively pulls the output toward ground but does not actively drive it high. A pull-up resistor is therefore required to establish a logic-high voltage whenever the output transistor is off. The resistor value should balance rise time, supply current, power dissipation, and compatibility with the receiving logic.
What is the LM339M/NOPB operating temperature range?
The LM339M/NOPB is specified for a commercial operating-temperature range of 0°C to 70°C. The Texas Instruments LM339-N ordering information identifies the M/NOPB configuration as the commercial-grade 14-SOIC version. For industrial temperature requirements, select a comparator grade explicitly specified for the wider temperature range instead of assuming the commercial part is adequate.
Can multiple LM339M open-collector outputs share one signal?
Yes. Multiple open-collector outputs can share a common signal line because the outputs connect only to the bus when pulled low and remain electrically disconnected while off. Install one suitable pull-up resistor on the shared line, and ensure that every connected output can tolerate the resulting pull-up voltage and sink-current condition. This arrangement is useful for multiple alarm or fault signals.
LM339M/NOPB vs LMV339M/NOPB: which is better?
Choose LM339M/NOPB when the design specifically requires the bipolar LM339 characteristics and its associated input-offset and supply-current behavior. Choose LMV339M/NOPB when lower power and CMOS-compatible input behavior are priorities and the circuit’s input levels satisfy the LMV339 limits. Both use a 14-SOIC package, but matching the package alone does not make every operating condition interchangeable.
Can onsemi LM339M replace Texas Instruments LM339M/NOPB?
The onsemi LM339M is a close functional alternative because it is also a general-purpose quad comparator with open-collector outputs in a 14-pin SOIC package. Before substitution, compare input-offset voltage, input-bias current, common-mode range, supply current, propagation delay, and temperature limits using the manufacturer data sheets. Board compatibility and similar function do not guarantee identical transient behavior.
When should I choose LM339M/NOPB instead of another quad comparator?
Choose LM339M/NOPB when the design requires four independent general-purpose comparator channels, open-collector outputs, and a 14-SOIC footprint. It is especially suitable for threshold alarms and wired fault buses where pull-up resistors are acceptable. Select an alternative when lower supply current, rail-to-rail input operation, faster response, or another temperature grade provides a more material benefit.
What can replace LM339M/NOPB?
The strongest replacement candidates are the Texas Instruments LM339M and LMV339M/NOPB plus the onsemi LM339M and LM339DG, all associated with 14-SOIC quad-comparator configurations. Each candidate must be checked for exact pin compatibility, open-collector output behavior, supply range, common-mode range, offset, and timing. Parts in DIP packages are not drop-in replacements for a 14-SOIC PCB.
Is LM339M/NOPB suitable for an industrial 24V control circuit?
LM339M/NOPB may fit a 24V threshold-detection circuit only if its complete absolute-maximum and recommended operating limits support the rail, transients, and temperature conditions. Its 0°C to 70°C commercial rating also makes it unsuitable by default for wider industrial environments. Confirm the supply rating, input common-mode range, transient protection, and environmental requirements in the manufacturer documentation.
What are the key specifications engineers should know about LM339M/NOPB?
The key specifications are four independent comparator channels, open-collector outputs, TTL/MOS/CMOS-compatible interfacing, a 14-pin SOIC package, and a 0°C to 70°C operating range. The manufacturer product documentation also identifies the LM339 family as compatible with TTL, MOS, and CMOS outputs. Supply voltage, offset, bias current, response time, and saturation limits must be taken from the LM339 data sheet for the exact orderable variant.
How should I design the LM339M/NOPB power and grounding system?
Use a low-impedance ground plane and place supply decoupling close to the LM339M/NOPB supply and ground pins. Keep comparator inputs and reference nodes away from high-current switching paths, and place pull-up resistors where their switching edges will not inject significant noise into sensitive analog nodes. Verify the regulator’s startup, load transients, and thermal performance across the intended input range.
Where can I buy LM339M/NOPB and check its current lead time?
Use the “Request a Quote” form on this page to ask for LM339M/NOPB availability, current lead time, order quantity, and delivery options. The form is the appropriate route for a quote and supply confirmation without relying on a static price. Include the required package, quantity, date code, and target shipment details in the request.
What is the price and stock status of LM339M/NOPB?
The current price and stock status for LM339M/NOPB should be obtained through the “Request a Quote” form on this page. Submit the required quantity, packaging preference, ship-to region, and required delivery date. This approach allows the order team to confirm current commercial availability and prepare an offer matched to the requested quantities.
Is LM339M/NOPB RoHS compliant and suitable for lead-free assembly?
The RoHS and lead-free status of this exact LM339M/NOPB orderable part should be confirmed from the current Texas Instruments product documentation or the declaration associated with the lot. The search results identify the component as a 14-SOIC comparator but do not state its compliance declarations. Do not infer compliance solely from the presence of the NOPB ordering suffix.

کے لیے انجینئرنگ ریفرنس ڈیٹا LM339M/NOPB — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose LM339M/NOPB when the PCB requires a four-channel general-purpose comparator in a 14-SOIC footprint, the outputs must be open collector, and the design is explicitly based on the original bipolar LM339 characteristics. LM339M is the closest same-manufacturer continuation for designs that do not require the NOPB ordering suffix. Use LMV339M/NOPB only when its CMOS input behavior better matches the signal levels and power budget; its package matches, but its electrical characteristics differ. The onsemi LM339M and LM339DG are candidate cross-manufacturer replacements for the same footprint, subject to matching offset, bias, timing, common-mode range, supply limits, and temperature grade. Do not choose similarly named DIP versions for an existing SOIC PCB, and do not use an open-collector comparator where push-pull outputs are required.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ LM339M LMV339M/NOPB LM339M LM339DG
Brand Texas Instruments Texas Instruments Texas Instruments onsemi onsemi
Package 14-SOIC 14-SOIC 14-SOIC 14-SOIC 14-SOIC
Comparator Function General-purpose differential comparator General-purpose differential comparator General-purpose differential comparator General-purpose differential comparator LM339-family comparator
Number of Channels 4 channels 4 channels 4 channels 4 channels 4 channels
Output Type Open collector Open collector Open collector Open collector Open collector
Input Technology Bipolar LM339 comparator Bipolar LM339 comparator CMOS comparator LM339-family comparator LM339-family comparator
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount

اہم امتیازی خصوصیات

  • Four independent threshold-monitoring channels in one 14-SOIC package (بمقابلہonsemi LM339M)
  • Open-collector output supports wired fault buses (بمقابلہonsemi LM339DG)
  • Direct continuity with the original Texas Instruments LM339 design (بمقابلہLMV339M/NOPB)

ڈیزائن نوٹس

Install a pull-up resistor on every open-collector output that must drive a logic-high state. The resistor sets the rise time and determines the current drawn while an output transistor is active. Calculate the resistor using the receiving logic’s input-current requirement and the maximum output-low voltage, then check that the resulting rise time meets the system timing requirement.

Place the supply bypass capacitor close to the VCC and GND pins, and use a low-impedance ground plane. Route the four comparator inputs away from switching nodes and pull-up-return currents. When multiple open-collector outputs share a bus, keep their traces short and place the common pull-up near the receiver or at a location that limits trace resistance and coupling.

Do not treat every LM339-family ordering code as a footprint-compatible replacement. The M suffix denotes the 14-SOIC configuration, while N commonly denotes a 14-pin through-hole package. Before substituting another manufacturer’s LM339M or LM339DG, verify pin numbering, open-collector output behavior, input common-mode range, supply limits, offset, and propagation delay.

Keep threshold references and sensor inputs away from pull-up resistors and digital return paths because switching edges can couple into high-impedance comparator inputs. If the input source has appreciable capacitance or noise, use appropriate filtering and confirm that filtering does not introduce excessive delay in a safety- or control-loop application. A solid ground reference is essential for repeatable threshold decisions.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The manufacturer product page identifies LM339M/NOPB as a 14-pin SOIC comparator, but the supplied manufacturer information does not state exact RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations for this orderable part.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-13 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

lm339m nopb lm339m datasheet lm339m pinout lm339m datasheet pdf lm339m smd LM339M/NOPB equivalent LM339M/NOPB replacement LM339M/NOPB drop-in substitute LM339M/NOPB price LM339M/NOPB stock Texas Instruments LM339M/NOPB LM339M/NOPB 14-SOIC pinout LM339M/NOPB open collector comparator LM339M/NOPB vs LMV339M/NOPB LM339M/NOPB application circuit

متعلقہ اجزاء اور اصطلاحات

Texas Instruments LM339M/NOPB LM339M LMV339M/NOPB onsemi LM339M onsemi LM339DG LM2901 LM239 LM339B quad differential comparator comparator analog integrated circuit open-collector output wired fault bus threshold detection 14-SOIC SOIC package family surface-mount package TTL compatibility CMOS compatibility MOS compatibility input offset voltage common-mode input voltage sensor signal conditioning power-supply supervision
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں