LM358QDRQ1 - Automotive Dual 1MHz Op-Amp SOIC-8 | Texas Instruments
MPN: LM358QDRQ1 ✓ فعالLM358QDRQ1 جائزہ
An operational amplifier (op-amp) is a high-gain voltage amplifier with differential inputs and a single-ended output; within the component hierarchy it belongs to the amplifier IC family, under integrated circuits, and is a core building block of analog signal chains. Dual op-amps such as the LM358-Q1 integrate two independent channels in one package, halving board area versus two single amplifiers while sharing supply rails.
Key features include two independent amplifier circuits, a 1 MHz class gain bandwidth, low input offset suitable for general-purpose sensing, operation from single or dual supplies, and AEC-Q100 automotive qualification with temperature grading that supports harsh under-hood environments. The wide supply range allows direct interfacing with battery-backed rails and regulated 5V logic domains.
Architecturally, the LM358-Q1 family traces to the classic LM358 bipolar design updated for automotive quality systems, with TI manufacturing controls per its automotive flow; the related LMV358-Q1 variant adds rail-to-rail output for low-voltage rails per the LMV321-Q1/LMV358-Q1/LMV324-Q1 datasheet.
Typical applications include automotive sensor signal conditioning, current-sense amplification front-ends, active filters, comparators and level shifters, and battery-management monitoring stages in vehicle ECUs and industrial controllers.
Design tip: with a 1 MHz GBW, keep closed-loop gains modest (10x or below) to preserve bandwidth and phase margin; check the output swing versus load, since the classic LM358 output does not reach the positive rail.
کے لیے ڈراپ اِن متبادل LM358QDRQ1 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں LM358QDRQ1 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Amplifier Type, Gain Bandwidth Product, Slew Rate.
LM358ADR
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
LM2904QDRQ1Q1
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
LMV358AQDRQ1
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC33202DR2
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
LM2904YDT
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
LM358QDRQ1 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Amplifier Type | General Purpose |
| Number of Circuits | 2 |
| Gain Bandwidth Product | 1 MHz |
| Automotive Qualification | Qualified for automotive applications (AEC-Q100 family) |
| پیکیج / کیس | 8-SOIC (0.154 in, 3.90 mm width) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Packaging | Tape & Reel (TR) |
| RoHS اسٹیٹس | Compliant |
| Related Family | LMV321-Q1 (single), LMV358-Q1 (dual), LMV324-Q1 (quad) rail-to-rail output op-amps |
LM358QDRQ1 پن کنفیگریشن
| پن 1 | OUT A — Output of amplifier A |
| پن 2 | IN A- — Inverting input of amplifier A |
| پن 3 | IN A+ — Non-inverting input of amplifier A |
| پن 4 | V- / GND — Negative supply or ground (single supply) |
| پن 5 | IN B+ — Non-inverting input of amplifier B |
| پن 6 | IN B- — Inverting input of amplifier B |
| پن 7 | OUT B — Output of amplifier B |
| پن 8 | V+ — Positive supply |
عام استعمالات
LM358QDRQ1 کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive Sensor Signal Conditioning, Current Sense Amplification Front-End, Active Filter Stages, Comparator and Level-Shifter Functions, Battery Management Monitoring, Industrial Control and Automation Analog Front-Ends.
Automotive Sensor Signal Conditioning
The LM358QDRQ1's Q1 automotive qualification and 1 MHz gain bandwidth make it well suited to conditioning low-frequency sensor signals such as pressure, position, and temperature in ECU front-ends. Used as a non-inverting amplifier or buffer between a resistive sensor bridge and an ADC, it adds gain with the offset floor appropriate for 12V single-supply rails. Its two channels allow amplification plus an active filter stage in one SOIC-8 footprint, reducing board area and BOM count in high-volume automotive builds.
تجویز کردہ
Current Sense Amplification Front-End
Paired with a shunt resistor, the LM358QDRQ1 amplifies small differential voltages for battery-management and load-monitoring circuits in vehicles and industrial equipment. Its general-purpose input stage and wide single-supply operation let one channel amplify the shunt signal while the second channel sets a reference or drives a fault comparator. For dedicated high-accuracy current sensing, TI INA-series amplifiers integrate the precision stage; the LM358-Q1 remains the economical choice where moderate accuracy and 1 MHz bandwidth are sufficient.
تجویز کردہ
Active Filter Stages
With a 1 MHz gain bandwidth product, the LM358QDRQ1 implements Sallen-Key and multiple-feedback active filters with corner frequencies up to tens of kilohertz while preserving adequate loop gain for accurate Q and cutoff settings. This fits anti-aliasing filters ahead of ADCs in automotive sensor modules and industrial controllers. Keeping closed-loop gains at or below 10x preserves bandwidth and phase margin; designers should account for the classic LM358 output stage swing limits when setting filter output headroom on single supplies.
تجویز کردہ
Comparator and Level-Shifter Functions
One LM358QDRQ1 channel can operate as a low-speed comparator for over-voltage, under-voltage, or window detection in 12V and 24V automotive rails, while the second channel buffers a threshold derived from a voltage reference. At 1 MHz-class speed it suits DC and slow transient supervision rather than fast edge detection. This dual-role usage - supervision plus reference buffering in one SOIC-8 package - is a common pattern in ECU power-monitoring and industrial power-supply health circuits where cost and board space dominate.
تجویز کردہ
Battery Management Monitoring
In battery-management systems, the LM358QDRQ1 buffers cell-voltage dividers and temperature-monitoring outputs before they reach a battery-monitor IC or microcontroller ADC. The Q1 automotive grade supports under-hood and traction-adjacent environments, and the dual channels let one package handle both a voltage buffer and a temperature-signal gain stage. Designers should bias inputs to keep the amplifier in its linear region across the full cell-voltage span, given the standard (non-rail-to-rail) output swing of the classic LM358 architecture.
تجویز کردہ
Industrial Control and Automation Analog Front-Ends
Beyond vehicles, the LM358QDRQ1 serves PLC I/O cards, motor-control supervisory circuits, and instrumentation front-ends that condition 0-10V or 4-20mA-derived signals. Its general-purpose bipolar design tolerates the noisy electrical environment of factory floors, and the SOIC-8 surface-mount footprint integrates into standard SMT assembly. The 1 MHz bandwidth covers control-loop feedback signals comfortably; for precision instrumentation where sub-millivolt offsets matter, TI's OPA series is the upgrade path at higher cost.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا LM358QDRQ1 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | LM358ADR | LM2904QDRQ1Q1 | LMV358AQDRQ1 | MC33202DR2 | LM2904YDT |
|---|---|---|---|---|---|---|
| Package | SOIC-8 (D) | SOIC-8 (D) - same | SOIC-8 (D) - same | SOIC-8 (D) - same | SOIC-8 - same | SOIC-8 - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | onsemi | STMicroelectronics |
| Number of Circuits | 2 | 2 | 2 | 2 | 2 | 2 |
| Gain Bandwidth Product | 1 MHz | 1 MHz | 1 MHz | 1 MHz | 2.2 MHz | 1 MHz |
| Automotive Qualification | Q1 automotive flow | No (industrial) | Yes (Q1) | Yes (Q1) | No (industrial) | Automotive grade |
اہم امتیازی خصوصیات
- Automotive Q1 qualification at commodity price (بمقابلہLM358ADR)
- Wide-supply classic architecture vs low-voltage variant (بمقابلہLMV358AQDRQ1)
- Cost and second-source coverage vs precision amplifiers (بمقابلہMC33202DR2)
ڈیزائن نوٹس
The classic LM358 architecture does not swing rail-to-rail on the output: the output approaches the negative rail closely but stops roughly 1.5V below the positive supply under load. Do not design output ranges that require the positive rail; budget headroom or choose the rail-to-rail LMV358-Q1 variant instead. Also note the input common-mode range includes the negative rail but not the positive rail.
Place a 100 nF ceramic decoupling capacitor directly at pin 8 (V+) to pin 4 (V-/GND), plus a 1 uF bulk capacitor per supply rail. In automotive environments with load-dump transients, protect the supply pin with a series resistor or TVS clamp if the rail can exceed the device maximum rating.
With 1 MHz gain bandwidth, closed-loop gains above 10x erode bandwidth and phase margin; a gain-of-10 amplifier has only about 100 kHz of usable bandwidth. For filters, verify that the corner frequency is at least a decade below GBW divided by the noise gain to keep Q accurate. Keep feedback resistors in the 1k-100k range to balance bias-current error and stability.
تعمیل کی معلومات
Q1 suffix denotes TI automotive flow with AEC-Q100-family qualification. RoHS/lead-free per standard TI automotive flow; verify REACH and halogen-free status on TI product page.
