LM393 - Dual Open-Collector Comparator | Texas Instruments
MPN: LM393 ✓ فعالLM393 جائزہ
A voltage comparator is an analog semiconductor that compares two input voltages and produces a digital output indicating their relative relationship. The LM393 belongs to the comparator hierarchy within analog ICs and broader signal-conditioning and power-management systems. Unlike an operational amplifier, its output is intended to switch actively and can operate from a single supply while accepting an input common-mode range down to ground.
Key features include two independent comparator channels, differential input voltage capability up to ±38 V, and compatibility with TTL, MOS, and CMOS logic. The open-collector output allows a designer to set the output logic voltage through an external pull-up resistor. This architecture is useful when driving multiple wired-open outputs, connecting to a bus, or interfacing with a supply domain different from the comparator output pull-up.
The LM393 can operate from a single supply or split supply, while the common-mode input range reaches ground for many sensing conditions. Its differential input limit equals the maximum-rated supply voltage, but the absolute maximum rating should not be interpreted as a normal operating range. Input protection, supply sequencing, and output pull-up selection remain important design constraints.
Typical uses include window detection in power supplies, battery monitoring, sensor threshold conditioning, industrial control interfaces, automotive electronics, and consumer equipment. In each case, the LM393 provides a simple high-or-low decision without the output stage normally associated with a push-pull logic device.
For reliable designs, select the correct package ordering code, verify the temperature grade, place decoupling close to the supply pins, and use a pull-up resistor sized for the intended logic family and output-current limit. Check input transients against the absolute maximum ratings rather than relying on nominal common-mode limits.
This product page combines the LM393 device description with functional guidance, drop-in replacement considerations, application patterns, and engineering-oriented comparisons. It helps buyers distinguish the open-collector dual comparator from op-amp alternatives while supporting package, temperature, and lifecycle decisions before requesting a quote.
کے لیے ڈراپ اِن متبادل LM393 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں LM393 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Comparator Type, Operating Temperature Range, Package, Output Type, Input Bias Current.
LM393B
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
LM2936BMX-3.3/NOPB
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →LM2903BIDR
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →LM2903BIDR
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →TS393CD
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →LM393 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Comparator Type | Dual independent precision voltage comparator |
| Number of Channels | 2 channels |
| Supply Voltage Range | 2 V to 30 V |
| Supply Configuration | Single or split supply |
| Common-Mode Input Range | Includes ground |
| Differential Input Voltage Range | ±38 V |
| آؤٹ پٹ کی قسم | Open-collector |
| Logic Compatibility | TTL, MOS, and CMOS compatible |
| آپریٹنگ درجہ حرارت رینج | 0 C to 70 C for LM393 grade |
| Package Options | 8-pin SOIC and other manufacturer order codes |
| ماؤنٹنگ ٹائپ | Surface mount |
| Output Pull-Up | External resistor required |
| B-Version Compatibility | Drop-in replacement for LM293, LM393, and LM2903 |
LM393 8-pin soic and other manufacturer order codes پن کنفیگریشن گائیڈ
LM393 (8-pin soic and other manufacturer order codes پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں LM393.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
LM393 کے لیے موزوں ہے 6 ایپلیکیشنs: Power-Supply Window Detection, Battery Voltage Threshold Monitoring, Industrial Sensor Interfacing, Automotive Fault Detection, Consumer Equipment Limit Switching, LED Constant-Current and Overvoltage Control.
Power-Supply Window Detection
The LM393 fits power-supply window detection because it provides two independent comparator channels, operates from a 2 V to 30 V supply range, and can compare a feedback signal with upper and lower references. Each open-collector output can sink current and use a pull-up to establish the logic-high voltage. Configuring one channel for an overvoltage condition and the other for an undervoltage condition simplifies fault signaling, although the output states must be interpreted according to the selected input polarity. The designer should account for input offset near the threshold, add filtering where the monitored rail is noisy, and keep the feedback divider within the common-mode input range. The LM393 does not actively drive the high state, so the pull-up voltage, resistor value, and sink-current capability must be selected together.
تجویز کردہ
Battery Voltage Threshold Monitoring
The LM393 is useful for battery threshold monitoring because its common-mode input range includes ground and its two channels can independently compare a divided battery voltage with reference levels. A resistive divider can scale the battery signal into the input range, while the open-collector outputs can pull down an alarm or status line through an external pull-up. This arrangement works well for low-voltage systems where the comparator must operate from a single supply. Engineering checks include the maximum differential input under charging transients, reference accuracy, input offset, and the behavior of the pull-up during a disconnected battery. For cells that can exceed the selected ordering code's supply limit, add a dedicated clamp or protection network rather than relying on absolute-maximum ratings.
تجویز کردہ
Industrial Sensor Interfacing
The LM393 can convert a slowly changing sensor signal into a switching decision for industrial control equipment. Its two independent channels support duplicate limit checks or the comparison of a sensor signal with a reference. The common-mode range extending to ground permits operation from a single supply in many 3.3 V or 5 V sensing systems, while the differential input capability of ±38 V accommodates signal transitions when operating limits are respected. A pull-up resistor defines the digital output state, and optional positive feedback can add hysteresis so noise near the threshold does not cause repeated transitions. The input network should limit transient energy, and the selected package and temperature grade must match the enclosure conditions.
تجویز کردہ
Automotive Fault Detection
The LM393's open-collector outputs and dual-channel architecture are suitable for simple automotive fault-detection functions when the selected ordering code has the required automotive qualification. The comparator can evaluate a divided sensor or supply-rail signal against a reference and pull a wired fault line low when a limit is exceeded. The 2 V to 30 V supply range supports many 12 V and 24 V system rails, subject to transient suppression and the exact device ratings. Because the base LM393 grade is associated with a 0 C to 70 C range, an automotive design should normally select an appropriately qualified orderable code. Reverse-battery pulses, load-dump events, and ESD can exceed routine operating limits, so external protection is essential.
تجویز کردہ
Consumer Equipment Limit Switching
The LM393 can implement compact limit-switching functions in consumer equipment where two threshold decisions are needed without a large microcontroller footprint. Its open-collector outputs can drive an LED, relay-driver input, or logic status line using an external pull-up. A single-supply configuration simplifies low-cost designs because the common-mode input range includes ground, while split supplies provide additional headroom for bipolar sensing when required. The design should account for output saturation, pull-up rise time, and any tolerance in the reference divider. If the target product requires a narrower operating-temperature range, a broader environment grade, or a push-pull output, choose a more suitable ordering code rather than modifying the footprint after manufacture.
تجویز کردہ
LED Constant-Current and Overvoltage Control
The LM393 can be used as a discrete supervisory element in LED or other constant-current systems. One channel may compare the voltage across a current-sense resistor with a reference, while the other monitors a supply or load condition. The open-collector output can pull down an oscillator, disable a driver, or assert a fault signal through a pull-up. The comparator's ground-referenced common-mode capability is valuable in low-side sensing arrangements, and the differential input rating allows a degree of transient margin when normal operating limits are respected. Layout should keep the sense path short and away from switching nodes. The selected ordering code must also satisfy the ambient temperature, output-current, and supply requirements of the complete lamp or load-control circuit.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا LM393 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | LM393B | LM293 | LM2903 | LM2903B | TS393 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | ROHM Semiconductor |
| Package | SOIC-8 | SOIC-8 | SOIC-8 | SOIC-8 | SOIC-8 | SOIC-8 |
| Comparator Channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Output Type | Open-collector | Open-collector | Open-collector | Open-collector | Open-collector | Open-collector |
| External Output Pull-Up | Required | Required | Required | Required | Required | Required |
اہم امتیازی خصوصیات
- Two independent threshold channels in one 8-pin package (بمقابلہLM339PWR)
- Broader specified operating-temperature range (بمقابلہLM393)
- Improved B-version electrical specifications (بمقابلہLM393)
ڈیزائن نوٹس
Place the supply-decoupling capacitor close to the comparator's supply and ground pins, and keep the input traces short to reduce noise pickup and propagation-delay variation. Route the two channels separately when one input is a precision reference and the other is a switching signal. The open-collector output needs a pull-up resistor; place that resistor near the receiving logic or driver input when long traces would otherwise add capacitance and slow the rising edge.
Do not use the ±38 V differential-input rating as a normal operating range. Keep normal input voltages inside the recommended common-mode interval, especially with single-supply operation, where the useful input range may not extend above the positive supply rail. Use resistor dividers or clamping networks for signals that can overshoot. This prevents comparator saturation, input damage, and long recovery times when an input leaves its valid common-mode region.
Add hysteresis when the sensed signal crosses the threshold slowly or contains noise, because a small offset error can otherwise cause repeated output transitions. Positive feedback from the output to the non-inverting input creates a controlled switching gap. Also verify that the pull-up voltage is acceptable for the output pin, that its resistor does not exceed the channel's sink-current capability, and that the selected package suffix matches the PCB footprint.
تعمیل کی معلومات
The base LM393 ordering code does not uniquely establish package, temperature grade, or organization-specific compliance status. Confirm these attributes against the exact orderable MPN and manufacturer declarations.
