LP87524-Q1 - 10A Quad-Output Automotive Buck | TI
MPN: LP87524-Q1 ✓ فعالLP87524-Q1 جائزہ
A buck converter is a DC-DC step-down regulator that reduces a higher input voltage to a lower output voltage. As a power management IC (PMIC), the LP87524-Q1 integrates multiple switching rails into a single device, reducing board space and system cost compared to discrete regulators.
Key features include 2MHz switching frequency, integrated power switches, load-current measurement without external sense resistors, and programmable start-up/shutdown delays and sequences. These sequences can synchronize with enable signals and GPIOs to control external regulators, load switches, and processor resets. The device's high integration eliminates external current-sense resistors, simplifying layout.
The LP87524-Q1 is designed to power automotive application processors like TDA4, AM62A, and AM26x series. Its four outputs can supply core, memory, I/O, and peripheral rails with high efficiency. The programmable sequencing enables safe power-up and power-down of complex SoCs, preventing latch-up or data corruption.
Typical applications include ADAS, infotainment, cluster displays, telematics, and in-vehicle networking. The 10A capability supports high-performance CPUs and GPUs. The wide input voltage range allows direct connection to automotive 12V/24V buses.
When designing with LP87524-Q1, ensure adequate input capacitance and thermal vias for the exposed pad. The programmable sequence feature must be configured correctly via I2C to match the processor's power sequencing requirements.
کے لیے ڈراپ اِن متبادل LP87524-Q1 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
LP87523-Q1
⚡ ایک ہی پیکیج📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
LP87564-Q1
⚡ ایک ہی پیکیج📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
LP87522-Q1
⚡ ایک ہی پیکیج ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
LP87521-Q1
⚡ ایک ہی پیکیج ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
LP87525-Q1
⚡ ایک ہی پیکیج ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
LP87524-Q1 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| آؤٹ پٹ کی قسم | Quad-output buck converter |
| Total Output Current | 10 A |
| آؤٹ پٹس کی تعداد | 4 |
| Phase | 1 |
| سوئچنگ فریکوئنسی | 2 MHz |
| Integrated Switches | Yes |
| Load Current Measurement | Supported without external sense resistor |
| Programmable Startup/Shutdown | Supported |
| پیکیج | VQFN-26-HR-EP (4x4.5) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| آپریٹنگ درجہ حرارت رینج | -40°C to +125°C (TA) |
| Automotive Grade | AEC-Q100 qualified |
LP87524-Q1 vqfn-26-hr-ep (4x4.5) پن کنفیگریشن گائیڈ
LP87524-Q1 (vqfn-26-hr-ep (4x4.5) پیکیج) کے لیے پن کنفیگریشن۔ یہ پاور ڈیوائس گیٹ، ڈرین اور سورس ٹرمینلز کی حامل ہے۔ غیر قطبی پیکیجز کے لیے، پن 1 کی درست سمت اور فوٹ پرنٹ کی تفصیلات کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ عام استعمالات میں پاور سپلائی ڈیزائن، موٹر ڈرائیونگ اور لوڈ سوئچنگ شامل ہیں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں LP87524-Q1.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
LP87524-Q1 کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive ADAS Processor Power, Automotive Infotainment System, Automotive Instrument Cluster, Automotive Telematics/Gateway, Automotive Camera Sensor Power, Industrial Robotics (Automotive-Grade).
Automotive ADAS Processor Power
The LP87524-Q1 delivers 10A across 4 rails to power ADAS SoCs like TDA4VL21HGAALZRQ1. Its 2MHz switching and integrated switches minimize solution size, while programmable start-up sequences ensure safe power sequencing for the processor. The load-current measurement feature allows monitoring without external sense resistors. This makes it ideal for camera processing and object recognition systems in vehicles.
تجویز کردہ
Automotive Infotainment System
The LP87524-Q1 provides multiple stable rails for infotainment SoCs like AM62A1-Q1. With 4 outputs and 10A total, it can supply core, memory, and I/O voltages. The 2MHz switching frequency reduces inductor size, enabling compact PCB layout. Programmable delays allow coordinated power-up of display and audio subsystems, preventing pop noise and startup glitches.
تجویز کردہ
Automotive Instrument Cluster
For instrument clusters, the LP87524-Q1 offers four regulated outputs to power the cluster controller, display driver, and sensors. Its 10A capability ensures stable operation under dynamic loads. The AEC-Q100 qualification and wide temperature range enable reliable operation in harsh vehicle environments, while the integrated load-current measurement assists in diagnostics without extra components.
تجویز کردہ
Automotive Telematics/Gateway
The LP87524-Q1 is suitable for telematics control units and gateways, providing separate rails for the application processor, modem, and CAN transceivers. The 2MHz switching frequency allows small filter inductors, and programmable start-up sequences handle the modem's power ramp requirements. With integrated switches, it replaces multiple single-output regulators, simplifying the BOM.
تجویز کردہ
Automotive Camera Sensor Power
LP87524-Q1 can power multiple camera sensors and their processing chips. Its four outputs provide separate bias rails (e.g., 3.3V, 1.8V, 1.2V) with 10A total, enough for sensor arrays. The low noise and high PSRR at 2MHz help maintain image quality. Programmable sequencing ensures sensors power up before the image processor, avoiding initialization errors.
تجویز کردہ
Industrial Robotics (Automotive-Grade)
The LP87524-Q1's automotive qualification also suits industrial robotics in demanding environments. It provides 10A across four outputs for motor control MCUs, sensors, and communication interfaces. The 2MHz switching reduces EMI and allows compact power stages. The integrated load-current measurement helps monitor subsystem health, and programmable sequences enable controlled shutdown during fault conditions.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا LP87524-Q1 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | LP87523-Q1 | LP87564-Q1 | LP87522-Q1 |
|---|---|---|---|---|
| Package | VQFN-26-HR-EP (4x4.5) | VQFN-26-HR-EP (4x4.5) | VQFN-26-HR-EP (4x4.5) | VQFN-26-HR-EP (4x4.5) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Automotive Grade | AEC-Q100 | AEC-Q100 | AEC-Q100 | AEC-Q100 |
اہم امتیازی خصوصیات
- Higher integration with 10A across four outputs (بمقابلہLP87523-Q1)
- Integrated load-current measurement (بمقابلہDiscrete regulator solutions)
- Automotive AEC-Q100 qualification (بمقابلہConsumer PMICs)
ڈیزائن نوٹس
The LP87524-Q1 integrates four buck converters with a 2MHz switching frequency. Use 10uF input capacitors close to each VIN pin and 22uF output capacitors for each rail. Ensure low ESR capacitors are selected to minimize ripple and voltage transients.
The VQFN-26-HR-EP package has an exposed pad that must be soldered to a large copper pour. With 10A total output, power dissipation can reach 2-3W. Use thermal vias under the pad and connect to a ground plane to maintain junction temperature below 125°C.
Do not omit the programmable start-up delays; incorrect sequencing may cause processor latch-up. The load-current measurement function requires no external sense resistor, but the I2C registers must be configured correctly. Refer to the TI application note for recommended register settings.
تعمیل کی معلومات
AEC-Q100 qualified per TI product page. RoHS and REACH compliant.
