Analog Devices

LT1253CS8 - Dual 270MHz Current-Feedback Video Amplifier | Analog Devices

MPN: LT1253CS8 ✓ فعال
6 mA per channel Vdss 55 mA Id 8-pin SOIC Package
MOQ: 1 |

LT1253CS8 جائزہ

Analog Devices LT1253CS8 is a low-cost, dual, current-feedback video amplifier with two independent amplifier channels in an 8-pin SOIC package. It features a 270 MHz small-signal bandwidth, 250 V/µs slew rate, 55 mA output current per channel, and a wide ±14 V supply range. The LT1253 family is intended for video applications requiring wide bandwidth, fast signal transitions, and channel isolation.

A current-feedback amplifier is a voltage-feedback amplifier architecture whose bandwidth and stability behavior can change with feedback resistance. This architecture is commonly used in video, imaging, and communications circuits that require high gain-bandwidth performance. The LT1253CS8 belongs to the broader operational-amplifier hierarchy, combining analog signal amplification with video-focused bandwidth and isolation characteristics in one integrated circuit.

The two amplifier channels are isolated except for their shared power-supply pins. According to the Analog Devices LT1253 product page, this isolation exceeds 94 dB at 5 MHz, helping reduce crosstalk when two independent video signals pass through the same package. The 270 MHz bandwidth and 250 V/µs slew rate also make the device suitable for video buffering, distribution, and gain stages operating with larger-amplitude transitions.

The LT1253CS8 accepts single or dual supplies across a ±14 V range and uses approximately 6 mA of supply current per channel under the stated operating conditions. Its 55 mA output-current capability provides suitable drive for practical video stages, while the current-feedback architecture supports the high operating frequencies associated with the family. Designers should account for amplifier input/output network values when setting gain because current-feedback amplifiers commonly use external feedback resistors.

Typical uses include professional video distribution, camera and imaging signal chains, monitor signal conditioning, broadcast equipment, and general-purpose high-speed analog amplification. The dual configuration reduces the component count compared with two separate single amplifiers and simplifies power-supply bypassing. It is particularly useful when two video channels must share a board area but still require strong isolation from one another.

For PCB implementation, place the power-bypass capacitors close to the supply pins and keep feedback and compensation components adjacent to their associated amplifier pins. Maintain short return paths for high-speed video signals, use a continuous ground reference, and avoid routing sensitive video traces adjacent to switching nodes or other high-energy timing signals. The 8-pin SO package also allows rework and inspection more easily than many fine-pitch alternatives.

This product page combines the LT1253 family architecture, 270 MHz bandwidth, 250 V/µs slew rate, supply range, isolation, and package information with practical guidance on video-signal routing, power bypassing, replacement selection, and design trade-offs. It helps engineers identify whether the dual SOIC LT1253CS8 satisfies their bandwidth, isolation, supply, and sourcing requirements before beginning layout.

کے لیے ڈراپ اِن متبادل LT1253CS8 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

LT1253CS8#PBF

✅ ڈراپ-اِن
📦 SOIC-8
Same dual current-feedback video-amplifier design and electrical ratings; difference is the explicit lead-free ordering suffix, with 0% parameter deviation

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LT1253CS8 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type Dual current-feedback video amplifier
Number of Amplifier Channels 2 channels
Small-Signal Bandwidth 270 MHz
Slew Rate 250 V/µs
سپلائی کرنٹ 6 mA per channel
Output Current per Channel 55 mA
Supply Voltage Range ±14 V (28 V total)
Differential Gain ±5 V
Differential Phase ±5°
Flat 0.1 dB Bandwidth 90 MHz
Channel Isolation Greater than 94 dB at 5 MHz
پیکیج 8-pin SOIC
ماؤنٹنگ ٹائپ Surface mount

LT1253CS8 8-pin soic پن کنفیگریشن گائیڈ

LT1253CS8 (8-pin soic پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

LT1253CS8 کے لیے 8-pin soic پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں LT1253CS8.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

LT1253CS8 کے لیے موزوں ہے 6 ایپلیکیشنs: Professional Video Distribution, Camera and Imaging Signal Chains, Broadcast Video Processing, Video Monitor Signal Conditioning, High-Speed Analog Interface, Industrial Test and Measurement.

📺

Professional Video Distribution

The LT1253CS8 is suitable for driving two independent video paths in professional monitoring and distribution equipment. Its 270 MHz bandwidth and 250 V/µs slew rate support rapid signal transitions, while the two channels provide greater-than-94 dB isolation at 5 MHz when they share the package. Use each channel as a gain or buffering stage and verify stability with the feedback resistor values recommended by the manufacturer. The 8-pin SOIC footprint simplifies board assembly, although each signal trace should remain short and referenced to a continuous ground plane.

🎥

Camera and Imaging Signal Chains

The LT1253CS8 can condition high-speed analog video signals in camera, imaging, and industrial vision electronics. A 270 MHz bandwidth is well above the 90 MHz flat 0.1 dB bandwidth, allowing designers to preserve signal amplitude through the flat passband, while 250 V/µs slew rate supports large video transitions. The 55 mA output current per channel is suitable for conventional terminated video stages. Configure the current-feedback network according to the family data sheet, keep feedback components compact, and confirm that cable loading does not exceed the amplifier’s stability and output-drive limits.

🌐

Broadcast Video Processing

The LT1253CS8 supports dual-channel broadcast video processing where bandwidth, slew rate, and channel separation are important. Its 270 MHz small-signal bandwidth and 250 V/µs slew rate provide headroom for standard-definition and higher-bandwidth composite or component-video stages, while isolation greater than 94 dB at 5 MHz reduces crosstalk between the two channels. Use separate feedback networks for each amplifier and route video signals away from switching regulators and digital timing nets. The dual SOIC package also reduces the number of power-bypass locations compared with two discrete single amplifiers.

🖥️

Video Monitor Signal Conditioning

The LT1253CS8 is appropriate for conditioning video signals that drive displays, monitors, or downstream sampling stages. The 90 MHz flat 0.1 dB bandwidth provides a useful flat-response region, and the 250 V/µs slew rate helps preserve edge information through gain and buffering operations. The dual-channel implementation is useful when a board must process related video and synchronization or control signals with separate amplifiers. Keep the output return path continuous, terminate cables according to the system impedance, and validate overshoot with the actual load because current-feedback amplifiers require the intended feedback network for stable operation.

🔧

High-Speed Analog Interface

The LT1253CS8 can serve as a high-speed gain and buffer element in analog interfaces where the operating bandwidth exceeds the bandwidth available from general-purpose amplifiers. Its 270 MHz bandwidth, 55 mA output current per channel, and ±14 V supply range provide a combination suited to moderate-amplitude, high-speed signals. The current-feedback architecture requires careful selection of external feedback resistors and compensation values; changing those values without stability testing can affect frequency response and transient behavior. Place each feedback network close to its channel and provide local supply bypassing for repeatable video or instrumentation performance.

🏭

Industrial Test and Measurement

The LT1253CS8 is useful in industrial video test and measurement equipment that requires two fast, isolated analog channels in a compact package. Its 270 MHz bandwidth and 250 V/µs slew rate can support pulse and video-related signal acquisition, while greater-than-94 dB isolation at 5 MHz helps limit interaction between channels. Use the common supply pins with local decoupling, maintain a continuous ground reference, and separate sensitive high-speed traces from switching circuitry. Because the LT1253 is a current-feedback amplifier, evaluate gain accuracy, overshoot, and stability using the actual external resistor values and intended source and load impedances.

تجویز کردہ پروڈکٹس کا خلاصہ

LT1253CS8#PBF Lead-free ordering form of the dual video amplifier استعمال ہوتا ہے: Professional Video Distribution, Camera and Imaging Signal Chains, Broadcast Video Processing, Video Monitor Signal Conditioning, High-Speed Analog Interface, Industrial Test and Measurement LT1253 Dual current-feedback video-amplifier family استعمال ہوتا ہے: Professional Video Distribution, Camera and Imaging Signal Chains, Broadcast Video Processing, Video Monitor Signal Conditioning, High-Speed Analog Interface, Industrial Test and Measurement
What is the LT1253CS8?
The LT1253CS8 is a dual, low-cost, current-feedback video amplifier from Analog Devices. It provides two amplifier channels in an 8-pin SOIC package, with a 270 MHz bandwidth, 250 V/µs slew rate, 55 mA output current per channel, and a ±14 V supply range. According to the Analog Devices LT1253 product page, the channels are isolated except for shared supply pins, with isolation greater than 94 dB at 5 MHz.
What are the key specifications of LT1253CS8 that engineers should know?
The LT1253CS8 combines two current-feedback amplifier channels, 270 MHz bandwidth, 250 V/µs slew rate, 55 mA output current per channel, and a ±14 V supply range in an 8-pin SOIC. Its channel isolation exceeds 94 dB at 5 MHz, while the 0.1 dB bandwidth is 90 MHz. According to the Analog Devices LT1253 family documentation, these characteristics position the device for wideband video buffering, distribution, and gain applications.
Is LT1253CS8 suitable for video amplifier applications?
Yes, the LT1253CS8 is specifically suited to video amplification because it combines 270 MHz bandwidth with a 250 V/µs slew rate. The Analog Devices LT1253 product page identifies the LT1253 as a low-cost dual current-feedback video amplifier. Its 90 MHz flat 0.1 dB bandwidth and greater-than-94 dB inter-channel isolation at 5 MHz are particularly useful for buffering and distributing independent video signals.
What is the supply voltage range of LT1253CS8?
The LT1253CS8 supports a wide supply range of ±14 V, equivalent to 28 V across the supply pins. According to the manufacturer family information, the LT1253 can operate from single or dual power supplies. The specified supply current is approximately 6 mA per channel, while the amplifier's 55 mA output-current capability allows it to drive conventional video-stage loads without operating at the supply-current limit.
Where can I download the LT1253CS8 datasheet PDF?
The official LT1253 documentation is available from the Analog Devices LT1253 product page at analog.com, which links to the family data sheet and product resources. The LT1253 data sheet covers the dual LT1253 and quad LT1254 devices, including their electrical characteristics and application information. For an LT1253CS8-specific pin assignment, use the package drawing and pin-description section within that manufacturer data sheet.
Where can I find the LT1253CS8 pinout?
The LT1253CS8 pinout is defined in the Analog Devices LT1253 family data sheet and its SOIC package drawing. Use the pin-description table to identify each amplifier channel, supply pins, and input or output connections before assigning PCB tracks. Do not infer the pin functions from the quad LT1254 variant because the LT1253CS8 is an 8-pin dual-device package rather than a 14-pin quad package.
What can replace the LT1253CS8?
The closest documented replacement is the LT1253CS8#PBF, which identifies the lead-free production ordering code for the same LT1253CS8 device. The LT1253CS8#TRPBF version uses a different shipping format and is not a distinct electrical design. Other manufacturers' current-feedback video amplifiers may require different feedback values, supply arrangements, or pin assignments, so verify the complete pinout and stability network before treating them as drop-in replacements.
Is LT1253CS8 the same as LT1253CS8#PBF?
Yes, LT1253CS8#PBF is the orderable lead-free designation associated with the LT1253CS8 dual video amplifier. The #PBF suffix identifies the lead-free termination and ordering variant rather than a different amplifier architecture. The underlying device remains a dual current-feedback video amplifier in an 8-pin SOIC package with 270 MHz bandwidth and 250 V/µs slew rate.
What is the best Analog Devices equivalent for LT1253CS8?
The LT1253CS8#PBF is the direct Analog Devices ordering equivalent for the LT1253CS8 because it identifies the lead-free version of the same dual current-feedback video amplifier. The LT1254 is a functional family member with four channels, but it is not a pin-to-pin substitute for the 8-pin LT1253CS8. Use the dual LT1253 ordering code when both footprint identity and the original dual-channel architecture are required.
When should I choose LT1253CS8 over a single video amplifier?
Choose the LT1253CS8 when the design needs two isolated video channels while keeping the footprint and component count small. Two channels in one 8-pin SOIC package can reduce board area and the number of supply-bypass connections compared with separate single-channel amplifiers. According to the Analog Devices LT1253 family description, the integrated channels remain isolated except for their shared supply pins, with isolation greater than 94 dB at 5 MHz.
Is LT1253CS8 better than LT1253CS8#PBF for replacement?
No functional difference is indicated between the base designation LT1253CS8 and the LT1253CS8#PBF ordering code. Both identify the dual current-feedback video amplifier, while #PBF specifies the lead-free assembly option. For new production designs, use the complete ordering code that matches the required lead-free termination and supplier inventory rather than comparing them as different amplifier models.
What is the difference between LT1253CS8 and LT1254?
The LT1253CS8 is a dual current-feedback video amplifier in an 8-pin SOIC package, whereas the LT1254 is the quad version in the same LT1253/LT1254 product family. The Analog Devices family page states that the dual and quad configurations reduce cost and insertion count compared with single amplifiers. The LT1254 is not a drop-in replacement because it has four channels and requires the corresponding quad-package pinout.
How should LT1253CS8 feedback and bypass components be placed?
Place feedback resistors and any compensation components close to the relevant LT1253CS8 amplifier pins to minimize parasitic feedback and maintain high-frequency stability. Connect supply-bypass capacitors close to the supply and ground pins, and provide a low-impedance ground return. Because the device supports 270 MHz bandwidth and 250 V/µs slew rate, long signal and power loops can degrade rise time, overshoot, and channel isolation.
Where can I buy LT1253CS8 and what is its lead time?
Use the Request a Quote form on this page to ask for LT1253CS8 availability, current lead time, and order quantity. The Analog Devices product page lists the LT1253 as a production device, while individual distributor inventory and lead times can change. The quote team can confirm the required ordering suffix, lead-free packaging, stock position, and shipment quantity for your specific build.
How much does LT1253CS8 cost?
The LT1253CS8 is available for quotation through the Request a Quote form on this page, where the current unit price can be tied to quantity, package format, and required delivery date. The Analog Devices LT1253 family page describes the devices as low cost, but its displayed starting figure is not a quotation for this exact ordering configuration. Submit the required quantity and lead time to receive a current offer.

کے لیے انجینئرنگ ریفرنس ڈیٹا LT1253CS8 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the LT1253CS8 when a board requires two independent, high-speed video channels and the design benefits from a current-feedback amplifier with 270 MHz bandwidth and 250 V/µs slew rate. Select LT1253CS8#PBF when the production BOM specifically requires the lead-free ordering suffix; it represents the same dual SOIC device and offers direct order-code continuity. The quad LT1254 may be preferable when four channels are needed, but it is not a footprint-compatible replacement for the 8-pin LT1253CS8. Cross-manufacturer current-feedback amplifiers should be considered only after checking pin assignments, feedback resistor values, compensation requirements, output drive, stability, and supply arrangement. For new layouts, reserve local bypass capacitance and keep each feedback network compact to preserve the intended frequency response.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ LT1253CS8#PBF
Package SOIC-8 SOIC-8 - same
Brand Analog Devices Analog Devices
Amplifier Channels 2 channels 2 channels
Architecture Current-feedback video amplifier Current-feedback video amplifier
Small-Signal Bandwidth 270 MHz 270 MHz
Slew Rate 250 V/µs 250 V/µs
Supply Current 6 mA per channel 6 mA per channel
Output Current per Channel 55 mA 55 mA
Supply Voltage Range ±14 V (28 V total) ±14 V (28 V total)
Channel Isolation Greater than 94 dB at 5 MHz Greater than 94 dB at 5 MHz
Flat 0.1 dB Bandwidth 90 MHz 90 MHz
Lifecycle Status Production Production

اہم امتیازی خصوصیات

  • Two channels with strong high-frequency isolation (بمقابلہLT1253CS8#PBF)
  • Wide video bandwidth with fast edge response (بمقابلہLT1253CS8#PBF)
  • Compact integration for dual video paths (بمقابلہLT1253CS8#PBF)

ڈیزائن نوٹس

Place the LT1253CS8 feedback resistors and any compensation components adjacent to the corresponding amplifier pins. Current-feedback amplifiers depend on the external feedback network for gain and stability, so long feedback loops add parasitic inductance and capacitance that can alter frequency response. Route each channel as a compact signal path, use a continuous ground plane, and keep the feedback-side copper physically separated from the inverting input and output paths where practical.

Place supply-bypass capacitors as close as practical to the LT1253CS8 supply and ground pins. The family operates across a wide ±14 V supply range, but local decoupling remains necessary to limit supply impedance at the 270 MHz bandwidth of the amplifier. Use short, low-inductance connections between each capacitor and the package pins, and verify the capacitor type, voltage rating, and ESR implications against the stability requirements of the selected feedback network.

Keep high-speed video traces short, continuous, and referenced to an uninterrupted ground plane. The LT1253CS8's 250 V/µs slew rate can expose impedance discontinuities as reflections and overshoot even when the nominal signal bandwidth is acceptable. Avoid crossings beneath noisy power or digital timing nets, minimize stub lengths, and use controlled-termination arrangements when driving cables. Validate edge response with the intended source impedance, feedback values, cable, and load rather than relying only on a small-signal bandwidth figure.

Do not treat the quad LT1254 as a drop-in substitute for the 8-pin LT1253CS8, and do not interchange current-feedback amplifiers solely because their bandwidth ratings appear similar. The LT1254 has four channels and a different package and pinout, while alternative current-feedback devices may require different feedback resistors, compensation, supply pins, or stability margins. For a literal replacement, use LT1253CS8#PBF after confirming the required ordering suffix and lead-free termination.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Yes
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The LT1253CS8#PBF ordering code explicitly identifies a lead-free termination. RoHS, REACH, halogen-free, and conflict-minerals status were not stated in the manufacturer product-page snippet.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-19 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

LT1253CS8 datasheet LT1253CS8 pinout LT1253CS8 datasheet pdf LT1253CS8 equivalent LT1253CS8 replacement LT1253CS8 vs LT1254 LT1253CS8 video amplifier LT1253CS8 270MHz bandwidth LT1253CS8 SOIC-8 Analog Devices LT1253CS8 LT1253CS8 price LT1253CS8 stock LT1253CS8 application circuit LT1253CS8 current feedback amplifier

متعلقہ اجزاء اور اصطلاحات

Analog Devices LT1253 LT1253CS8 LT1253CS8#PBF LT1253CS8#TRPBF LT1254 current-feedback amplifier video amplifier operational amplifier analog signal amplifier semiconductor SOIC-8 surface-mount package 270 MHz bandwidth 250 V/µs slew rate 55 mA output current ±14 V supply 94 dB channel isolation video distribution broadcast video industrial vision feedback resistor power-supply bypassing high-speed analog signal
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں