M2GL005-1VF256I - 6K LEs, 161 I/O IGLOO2 FPGA | Microchip
MPN: M2GL005-1VF256I ✓ فعالM2GL005-1VF256I جائزہ
An FPGA is a programmable semiconductor whose digital logic, I/O, and memory resources can be configured after manufacture. Within the device hierarchy, the M2GL005 belongs to IGLOO2, a low-density FPGA family positioned below larger IGLOO2 devices. The IGLOO2 family is intended for compact control, bridging, interface conversion, secure connectivity, and system-management functions where a programmable logic solution is more flexible than a fixed application-specific integrated circuit.
The M2GL005-1VF256I provides 6,060 logic elements and 161 user I/O in the 256-VF package. Configuration data is stored in on-chip flash, allowing the FPGA to retain its programmed logic without a separate external configuration PROM. Its low-density architecture is useful for protocol bridges, I/O expansion, data acquisition front ends, industrial control modules, and compact embedded systems where board area and power consumption are important.
The IGLOO2 architecture supports a mix of programmable logic and memory resources for parallel processing, state machines, data formatting, and interface control. Because the device includes on-chip flash configuration memory, a prototype or production board can use the same nonvolatile configuration approach across power cycles. Designers must still observe the voltage, timing, decoupling, thermal, and package-connection requirements in the IGLOO2 data sheet.
Typical applications include industrial sensor aggregation, communications protocol conversion, secure boot and key-management support, embedded instrumentation, low-power monitoring systems, and control logic for industrial or communications equipment. The 161 available I/O are particularly useful for parallel sensors, display interfaces, capture logic, and board-level signaling when package density is more important than very high logic capacity.
For PCB implementation, follow the Microchip IGLOO2 Packaging and Pin Descriptions User Guide for the complete 256-ball connection list and differential-pair assignments. Place all required power and decoupling capacitors close to their specified balls, route configuration interfaces away from sensitive analog or high-speed nets, and validate every unused ball according to the device documentation before releasing the layout.
کے لیے ڈراپ اِن متبادل M2GL005-1VF256I — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں M2GL005-1VF256I (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Configuration Memory, Device Family, Logic Elements.
M2GL005-VF256I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →M2GL005-VFG256I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →M2GL005S-VFG256I
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
M2GL005-1VF256I زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | IGLOO2 low-density flash FPGA |
| Logic Elements | 6,060 logic elements |
| Equivalent Logic Cells | 6K LEs |
| User I/O | 161 I/O |
| پیکیج | 256-ball FBGA |
| Package Designation | 256 VF |
| Configuration Memory | On-chip flash |
| Speed Grade | -1 |
| Temperature Grade | Industrial |
| Core Voltage | 1.2 V |
| Logic Cell Type | Flash-based programmable logic |
| Device Family | IGLOO2 |
| ماؤنٹنگ ٹائپ | Surface mount |
| Package Pin Count | 256 balls |
| Product Status | In production |
| RoHS اسٹیٹس | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
M2GL005-1VF256I 256 balls پن کنفیگریشن گائیڈ
M2GL005-1VF256I (256 balls پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں M2GL005-1VF256I.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
M2GL005-1VF256I کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor Aggregation, Communications Protocol Bridge, Embedded Instrumentation Control, Secure Connectivity and System Management, Low-Power Monitoring Controller, Data Acquisition Front End.
Industrial Sensor Aggregation
The M2GL005-1VF256I is suitable for collecting signals from multiple industrial sensors and converting them into a compact digital data stream. Its 161 user I/O can accommodate parallel digital sensors, interrupt inputs, status indicators, and actuator outputs, while 6,060 logic elements can implement counters, filters, threshold logic, and protocol framing. The on-chip flash configuration retains the control program across power cycles without an external configuration PROM. Keep clocked sensor interfaces short, assign unused I/O according to the package guide, and validate input tolerances and output drive settings for each external signal. The result is a compact control front end for monitoring modules and industrial automation equipment.
تجویز کردہ
Communications Protocol Bridge
The M2GL005-1VF256I can bridge parallel and serial communication formats in compact embedded controllers. Its 6,060 logic elements are sufficient for protocol state machines, byte conversion, FIFO control, baud-rate handling, and command filtering, while 161 I/O provide substantial board-level connectivity. On-chip flash supports unattended startup and configuration retention. Engineers should establish the clocking scheme, constrain timing-critical paths, and isolate high-speed data paths from configuration signals to reduce coupling. The device is particularly suitable for legacy serial, parallel, or industrial communications interfaces where a small programmable logic footprint is more valuable than maximum FPGA capacity.
تجویز کردہ
Embedded Instrumentation Control
The M2GL005-1VF256I can implement control, capture, and data-formatting logic for embedded instrumentation. The 161 I/O support digital measurement inputs, trigger signals, displays, and control outputs, while 6,060 logic elements can handle sequencing, calibration tables, sample counters, and data packing. Because configuration is held in on-chip flash, the instrument can begin operating immediately after power-up without loading a separate bitstream. Use the family data sheet to determine acquisition and interface timing, and reserve adequate routing flexibility for trigger signals. This arrangement suits compact test equipment, signal-conditioner modules, and specialized measurement products that need adaptable control logic.
تجویز کردہ
Secure Connectivity and System Management
The M2GL005-1VF256I is suitable for low-level secure connectivity, key-handling, and system-management functions adjacent to a larger processor. Its programmable logic can implement authentication state machines, command filters, register interfaces, and event logging, while 161 I/O support control and status connections. Embedded flash provides persistent configuration, but sensitive design practices and the applicable Microchip security guidance should still be followed. Keep administrative interfaces physically separated from exposed external connectors where possible, and validate all asynchronous inputs against timing requirements. This use is appropriate for embedded gateways and communication modules that require a small amount of autonomous logic.
تجویز کردہ
Low-Power Monitoring Controller
The M2GL005-1VF256I works well as the central controller in a compact monitoring system because it combines programmable logic, 161 I/O, and nonvolatile configuration in one device. It can supervise sensors, debounce discrete inputs, drive indicators, timestamp events, and maintain alarm states while the main system is idle. The low-density architecture avoids allocating a large FPGA when only modest logic and I/O are required. Power configuration should follow the datasheet's recommended operating states and supply sequencing, while unused inputs need explicit treatment to prevent floating-node behavior. This application is well suited to environmental monitors, equipment supervisors, and small industrial condition-monitoring modules.
تجویز کردہ
Data Acquisition Front End
The M2GL005-1VF256I can control multiple converters and organize their digital outputs into a coherent acquisition stream. The 161 I/O permit parallel data capture, clock distribution, trigger routing, and status monitoring, while the 6,060 logic elements support sample sequencing, filtering, and packing. Flash configuration enables repeatable instrument startup and firmware updates. Designers should define timing relationships between converter data and the FPGA clock, use the packaging guide for bank and differential-pair assignments, and keep analog and digital return paths separated. The device is appropriate for multichannel industrial data-acquisition modules, test fixtures, and compact embedded measurement systems.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا M2GL005-1VF256I — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | M2GL005-VF256I | M2GL005-VFG256I | M2GL005S-VFG256I |
|---|---|---|---|---|
| Package | 256-ball FBGA | 256-ball FBGA | 256-ball FBGA | 256-ball FBGA |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Device Family | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 |
| Speed Grade | -1 | Not stated in ordering code | Not stated in ordering code | Not stated in ordering code |
| Temperature Grade | Industrial | Not stated in ordering code | Not stated in ordering code | Not stated in ordering code |
اہم امتیازی خصوصیات
- Combines 6,060 logic elements with 161 user I/O in one 256-ball device (بمقابلہM2GL005-VF256I)
- Explicit -1 speed-grade ordering (بمقابلہM2GL005-VFG256I)
- Explicit industrial-temperature ordering (بمقابلہM2GL005S-VFG256I)
- High I/O density for compact programmable control systems (بمقابلہM2GL005-TQG144)
ڈیزائن نوٹس
Build the supply network from the IGLOO 2 family data sheet rather than from a generic FPGA reference. Separate the required core and I/O supplies, place their decoupling capacitors at the designated package balls, and keep high-current return paths close to the device. Verify voltage tolerance during configuration, I/O ramp, and full-load operation, since incorrect sequencing or inadequate filtering can compromise configuration reliability and signal integrity.
Use the M2GL005 VF256 pin-information guide to assign every ball, especially power, ground, configuration pins, clock inputs, and differential pairs. Place decoupling and configuration-interface components on the component side and preserve the shortest practical return paths. Do not infer unused-ball treatment from another FPGA family; follow the specific Microchip recommendation for unused I/O and exposed or unused balls in the selected package.
Route clocks and high-speed interfaces with continuous reference planes and avoid crossing split power or ground planes. Match trace lengths where the supported I/O standards require source-synchronous operation, and keep switching outputs away from sensitive clock and configuration nets. Bank-specific voltage compatibility must also be checked so every driven signal remains within the limits of its assigned I/O bank.
The -1 speed designation and I temperature suffix are functional ordering attributes, not optional text. When comparing M2GL005-1VF256I with M2GL005-VF256I, M2GL005-VFG256I, or M2GL005S-VFG256I, confirm the speed grade, temperature range, package code, and device identifier in the Microchip ordering documentation. A matching 256-ball outline alone does not establish that the two devices are interchangeable.
Estimated: the device dissipation depends on logic activity, I/O switching, core voltage, and the selected I/O standards, so calculate it from the actual design rather than a catalog maximum. Use the manufacturer power-dissipation and thermal information together with the PCB stackup and copper area. Avoid routing dense high-speed traffic immediately under the BGA unless the mechanical and thermal design explicitly supports it.
تعمیل کی معلومات
The industrial suffix identifies the temperature ordering option, but no RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact MPN. Automotive qualification was not stated for this device.