MAX1165AEUI+ - 16-Bit Low-Power SAR ADC | Maxim Integrated
MPN: MAX1165AEUI+ ✓ فعالMAX1165AEUI+ جائزہ
A SAR ADC (Successive Approximation Register Analog-to-Digital Converter) is a type of data converter that resolves each conversion in a fixed number of clock cycles by successively comparing the sampled input against an internal binary-weighted capacitor DAC. SAR ADCs sit between flash and delta-sigma converters in the speed/resolution hierarchy: faster than delta-sigma at moderate resolution, much lower power than flash, and inherently free of pipeline latency. They are widely used in industrial process control, instrumentation, and data-acquisition front-ends where one conversion per sample is required.
Key features of the MAX1165AEUI+ include ±1 LSB DNL (no missing codes), an internal 4.096V bandgap reference with the option to use an external reference, a hardware RDY/INT output, and an SPI-/QSPI-/MICROWIRE-compatible serial-mode option (selected at power-up via the INT/EOC pin). The reference architecture lets designers trade absolute accuracy against input range, and the internal oscillator eliminates the need for an external clock in many systems. The 28-TSSOP footprint makes it PCB-friendly for both hand prototyping and high-density acquisition modules.
The MAX1165AEUI+ uses a charge-redistribution DAC with input T/H and auto-calibration on every conversion, giving excellent AC and DC performance across temperature. Power-down between conversions reduces supply current to under 1 mA in idle, making the device attractive for battery-backed instrumentation. The parallel interface allows direct connection to microcontrollers and DSPs without serial glue logic, and the asynchronous RDY signal simplifies interrupt-driven sampling.
Typical applications include multi-channel PLC analog input modules, weigh-scale front-ends, transducer signal conditioning, and portable data loggers. The wide ±10V true-differential input range eliminates external signal-conditioning op-amps in many 4-20 mA-style loops, and the 165 ksps rate is sufficient for vibration analysis and motor-control current sensing. Designers commonly pair it with a precision op-amp buffer (MAX4475) and an isolated DC/DC to build complete 16-bit acquisition channels.
When designing with the MAX1165AEUI+, ensure the analog and digital supplies are decoupled with separate 0.1 µF ceramic capacitors placed close to the AVCC and DVCC pins. The REF pin requires a 4.7 µF ceramic or tantalum bypass cap to meet the 100 dB SINAD specification; a smaller capacitor will degrade noise performance. Always read the RDY/INT pin via level-triggered interrupts rather than polling to avoid missed conversions at the full 165 ksps rate.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet — including same-brand family members like MAX1165ACUI+ and cross-brand pin-compatible ADCs from Analog Devices and TI.
کے لیے ڈراپ اِن متبادل MAX1165AEUI+ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MAX1165AEUI+ (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Operating Temperature, Package, MSL Level, RoHS Status, Resolution.
MAX1165ACUI+
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MAX1165BEUI+
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MAX1166BEUI+
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MAX1166AEUI+
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MAX1156AEUP+T
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MAX1165AEUI+ زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| ریزولوشن | 16 bit |
| Architecture | SAR (Successive Approximation) |
| Input Channels | 1 (true differential) |
| اِن پٹ وولٹیج رینج | ±10 V (differential, MAX1165) |
| Analog Supply Voltage | 4.75 V to 5.25 V |
| Digital Supply Voltage | 2.7 V to 5.25 V |
| Throughput Rate | 165 ksps |
| INL (Max) | ±1 LSB |
| DNL (Max) | ±1 LSB |
| SINAD | 100 dB |
| Internal Reference | 4.096 V bandgap |
| انٹرفیس | Parallel (16-bit), serial-mode compatible |
| آپریٹنگ درجہ حرارت | -40 °C to +85 °C (industrial) |
| پیکیج | 28-pin TSSOP |
| ماؤنٹنگ ٹائپ | Surface Mount |
| MSL لیول | 1 (unlimited floor life at ≤30 °C/85% RH) |
| RoHS اسٹیٹس | Compliant |
| Terminal Form | Gull Wing |
| Converter Type | ADC, single channel, SAR |
MAX1165AEUI+ پن کنفیگریشن
| پن 1 | AIN+ — Positive analog input (true differential) |
| پن 2 | AIN- — Negative analog input (true differential) |
| پن 3 | REF — Internal 4.096 V reference / external reference input |
| پن 4 | REFGND — Reference ground |
| پن 5 | AVCC — Analog supply (4.75 V to 5.25 V) |
| پن 6 | AGND — Analog ground |
| پن 7 | CS — Chip select (active low) |
| پن 8 | RD — Read strobe (active low) |
| پن 9 | WR/RCLK — Write / conversion start (active low) |
| پن 10 | INT/EOC — Interrupt / End-of-conversion (open drain) |
| پن 11 | CLK — External clock input (or internal oscillator with cap to AGND) |
| پن 12 | D15 — Parallel data bit 15 (MSB) |
| پن 13 | D14 — Parallel data bit 14 |
| پن 14 | D13 — Parallel data bit 13 |
| پن 15 | D12 — Parallel data bit 12 |
| پن 16 | D11 — Parallel data bit 11 |
| پن 17 | D10 — Parallel data bit 10 |
| پن 18 | D9 — Parallel data bit 9 |
| پن 19 | D8 — Parallel data bit 8 |
| پن 20 | D7 — Parallel data bit 7 |
| پن 21 | D6 — Parallel data bit 6 |
| پن 22 | D5 — Parallel data bit 5 |
| پن 23 | D4 — Parallel data bit 4 |
| پن 24 | D3 — Parallel data bit 3 |
| پن 25 | D2 — Parallel data bit 2 |
| پن 26 | D1 — Parallel data bit 1 |
| پن 27 | D0 — Parallel data bit 0 (LSB) |
| پن 28 | DVCC — Digital supply (2.7 V to 5.25 V) |
عام استعمالات
MAX1165AEUI+ کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial PLC Analog Input Module, Weigh-Scale and Load-Cell Front-End, Multi-Channel Data Acquisition Card, Portable Battery-Powered Data Logger, Medical Patient Monitoring Equipment, Motor Control Current Sensing.
Industrial PLC Analog Input Module
The MAX1165AEUI+ suits 16-bit industrial PLC analog input modules because of its ±10 V true-differential input range, which handles the ±24 V fault transients typical in 4-20 mA loops without external signal-conditioning op-amps. With 165 ksps throughput and ±1 LSB INL, it captures process variables (pressure, flow, temperature-via-RTD) at the loop's bandwidth limit. Place the part between a 250 Ω sense resistor and the MCU/DSP parallel bus; decoupling AVCC and DVCC with separate 0.1 µF ceramics eliminates digital-noise coupling into the conversion result. Power-down between conversions reduces idle current to under 1 mA, critical for isolated loop-powered modules where total quiescent budget is below 5 mA.
تجویز کردہ
Weigh-Scale and Load-Cell Front-End
The MAX1165AEUI+ delivers 16-bit resolution with 100 dB SINAD, which translates to a noise floor below 100 µV at the ±10 V input range — sufficient for a weigh-scale resolving 0.01% of full scale when paired with a bridge-excitation regulator and instrumentation amp. Its true-differential input rejects ground-loop noise from the load cell, and the internal 4.096 V reference stabilizes the ADC LSB weight across the industrial temperature range. Using the MAX1165AEUI+ over a discrete integrating ADC eliminates 50/60 Hz notch-filter design effort because the SAR samples at 165 ksps and outputs a 16-bit code in a single conversion.
تجویز کردہ
Multi-Channel Data Acquisition Card
Multi-channel DAQ cards for vibration monitoring and factory automation benefit from the MAX1165AEUI+'s parallel 16-bit output bus, which connects directly to an FPGA or DSP without serial glue logic. The 165 ksps throughput per channel, when time-multiplexed through an external analog mux, supports aggregate sample rates above 1 Msps across 8 channels. The internal reference and on-chip T/H eliminate external components, shrinking the BOM. The MAX1165AEUI+ proves especially useful in PC-based DAQ cards where the parallel bus maps directly into the FIFO memory with minimum latency.
تجویز کردہ
Portable Battery-Powered Data Logger
In battery-powered data loggers — handheld vibration, soil-moisture, or field-service instruments — the MAX1165AEUI+ draws under 1 mA in power-down between conversions, supporting months of standby on a single AA cell pair when sampling once per second. The 2.7 V to 5.25 V digital supply range aligns directly with lithium or alkaline packs, eliminating a boost converter. The 100 dB SINAD preserves measurement integrity in noisy field environments, and the 28-TSSOP footprint fits inside handheld enclosures with 4-layer routing.
تجویز کردہ
Medical Patient Monitoring Equipment
Patient monitors for ECG, SpO2, and respiration use the MAX1165AEUI+ for 16-bit acquisition of multiple vital-sign channels at latencies below 6 µs per conversion, well below the 50 ms latency budget for alarm triggering. The ±10 V common-mode tolerance accommodates the high electrode offset voltages seen across defibrillation events when paired with a front-end instrumentation amp. The MAX1165AEUI+ runs from a single 5 V analog rail and meets the noise requirements of IEC 60601-1-2 for medical electrical equipment (consult system integrator for full qualification).
تجویز کردہ
Motor Control Current Sensing
Three-phase motor controllers and servo drives use the MAX1165AEUI+ to sample phase currents via shunt resistors at 165 ksps, supporting 30 kHz PWM with 5+ samples per PWM period. The ±10 V input range matches typical ±5 V shunt-amplifier outputs, and the 16-bit resolution enables torque-ripple control loops requiring better than 0.05% current accuracy. The parallel interface permits direct FPGA sampling at deterministic 6 µs intervals — far better than sigma-delta latency — supporting field-oriented control (FOC) without prediction. The MAX1165AEUI+ thus bridges analog current sensing and digital motor control elegantly.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MAX1165AEUI+ — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | MAX1165ACUI+ | MAX1165BEUI+ | MAX1166AEUI+ | MAX1156AEUP+T |
|---|---|---|---|---|---|
| Package | TSSOP-28 | TSSOP-28 (same) | TSSOP-28 (same) | TSSOP-28 (same) | TSSOP-28 (same) |
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 12 bit |
| Throughput | 165 ksps | 165 ksps | Lower speed grade | 165 ksps | 125 ksps |
| Input Range | ±10 V differential | ±10 V differential | ±10 V differential | 0 to +10 V single-ended | ±10 V differential |
| Temperature Grade | Industrial -40 to +85 °C | Commercial 0 to +70 °C | Industrial | Industrial | Industrial |
| RoHS / Lead-Free | Yes (+ suffix) | Yes (+ suffix) | Yes (+ suffix) | Yes (+ suffix) | Yes (T suffix) |
اہم امتیازی خصوصیات
- Industrial temperature grade in same package as commercial variant (بمقابلہMAX1165ACUI+)
- Wide ±10 V true-differential input eliminates external signal conditioning (بمقابلہMAX1166AEUI+)
- Higher bit depth at same pin footprint (بمقابلہMAX1156AEUP+T)
ڈیزائن نوٹس
The MAX1165AEUI+ requires separate analog and digital supplies, AVCC (4.75 V to 5.25 V) and DVCC (2.7 V to 5.25 V). Place 0.1 µF ceramic decoupling capacitors as close as possible to each supply pin, plus a 4.7 µF ceramic or tantalum bulk capacitor on the REF pin to meet the 100 dB SINAD spec. Estimated: at 165 ksps with a 5 V AVCC, supply current peaks around 5 mA during conversion and falls to ~1 mA in power-down between samples — averaging below 2 mA with duty-cycling.
Do not omit the 4.7 µF bypass capacitor on the REF pin — without it, the internal 4.096 V reference is loaded by the charge-redistribution DAC and noise rises by 8-10 dB. Always enter power-down (logic high on CS for >3 clock cycles) between conversions if low quiescent is required, otherwise the part remains in full-power mode. Finally, route parallel data bus traces with 50 Ω controlled impedance and keep them away from the REF and AVCC traces to avoid coupling.
Use a star-ground topology with separate analog and digital ground planes joined at a single point beneath the MAX1165AEUI+ AGND pin. Keep the analog input traces (AIN+, AIN-) short, matched, and guarded with AGND on both sides to reject common-mode noise. Place the REF decoupling capacitor within 5 mm of the REF pin and use a wide, low-inductance trace for AVCC.
Estimated: at 165 ksps the parallel data bus toggles D0-D15 within a 6 µs conversion window; place 33 Ω series-termination resistors within 25 mm of the MAX1165AEUI+ outputs if the bus length exceeds 50 mm to the host MCU/FPGA. The RDY/INT pin should drive an edge-triggered interrupt — not be polled — to avoid missing conversions at full throughput rate.
تعمیل کی معلومات
RoHS and lead-free status indicated by '+' suffix per Maxim part-numbering convention. REACH compliant. AEC-Q100 not offered; for automotive applications consult factory. Halogen-free status not explicitly stated in provided web data.
