Analog Devices

MAX232EWE.C70401 - 120kbps RS-232 Transceiver | Analog Devices

MPN: MAX232EWE.C70401 ✓ فعال
+5 V Vdss 16-pin SOIC Package
MOQ: 1 |

MAX232EWE.C70401 جائزہ

The Analog Devices MAX232EWE.C70401 is a +5 V-powered, 2-transceiver RS-232 interface IC housed in a 16-pin SOIC package. It supports data rates up to 120kbps and meets EIA/TIA-232E and CCITT V.28 specifications when loaded. The device provides two driver and two receiver channels for translating logic-level signals between an RS-232 port and a digital controller.

An RS-232 transceiver is an interface IC that bridges a computer or embedded system with a serial port by converting logic-level voltages to and from RS-232 signal levels. In the product hierarchy, the MAX232EWE.C70401 belongs to the interface IC family, then to the RS-232 driver and receiver class, and ultimately to the broader semiconductor category. It is useful where a modern controller lacks native RS-232 electrical interfaces.

The principal features include two transmit drivers, two receive receivers, operation from a +5 V supply, and support for data rates up to 120kbps. Its 16-pin SOIC package supports compact surface-mount assembly. The manufacturer identifies compliance with EIA/TIA-232E and CCITT V.28 specifications when the interface is loaded, making it applicable to conventional RS-232 equipment, control systems, instrumentation, and industrial data links.

The MAX232 family uses charge-pump circuitry to develop the bipolar voltage swings required by RS-232 from a single +5 V supply. This architecture allows the IC to operate with a single positive rail while presenting logic-compatible signals to the connected controller. Although the product page groups the MAX232E among its multichannel RS-232 driver and receiver devices, it specifically identifies the MAX202E and MAX232E as available in 16-pin TSSOP, narrow SO, wide SO, and DIP package options.

Typical uses include connecting a 5 V microcontroller or processor to a legacy RS-232 console, instrumentation interface, maintenance port, or industrial controller. The two-driver and two-receiver arrangement supports two communication channels in one package. The maximum specified data rate of 120kbps exceeds common serial-console rates, although the complete link must also satisfy the timing and signal-integrity requirements of the connected equipment.

PCB implementation should follow the manufacturer's pin description and recommended decoupling arrangement exactly. Keep the charge-pump and interface layout shown in the datasheet, provide the specified supply capacitance, route RS-232 driver outputs away from sensitive analog nodes, and account for the higher voltage and current on the cable side of the interface. The complete pin assignment should be taken from the package drawing because the exact exposed-pad and no-connect details must match the ordered package variant.

This page combines the exact manufacturer interface specifications, ordering information, package data, sourcing links, and practical application guidance. It also identifies genuine same-family alternatives while distinguishing verified drop-in choices from options that require package or design revalidation.

کے لیے ڈراپ اِن متبادل MAX232EWE.C70401 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

MAX232EWE+

✅ ڈراپ-اِن
Analog Devices
📦 16-pin SOIC
Dual RS-232 transceiver · RS-232 · 4.5 V to 5.5 V · 5 V · 2 channels · 2 channels · 120 kbps · CMOS

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

MAX232EWE

✅ ڈراپ-اِن
📦 16-pin SOIC
Original MAX232E ordering option in the same 16-pin SOIC package; +5 V operation and RS-232 channel function are retained, while revision and sourcing details require comparison

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MAX232EWE.C70401 تفصیلات

Product Type RS-232 transceiver interface IC
Driver and Receiver Channels 2 drivers and 2 receivers
سپلائی وولٹیج +5 V
Maximum Data Rate 120kbps
پیکیج 16-pin SOIC
ماؤنٹنگ ٹائپ Surface mount
Interface Standard EIA/TIA-232E and CCITT V.28
Standard Compliance Condition Specified when loaded
Signal Direction Support Bidirectional through separate drivers and receivers

MAX232EWE.C70401 16-pin soic پن کنفیگریشن گائیڈ

MAX232EWE.C70401 (16-pin soic پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

MAX232EWE.C70401 کے لیے 16-pin soic پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MAX232EWE.C70401.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

MAX232EWE.C70401 کے لیے موزوں ہے 6 ایپلیکیشنs: Legacy RS-232 Console Interface, Industrial Controller Serial Port, Test and Measurement Equipment, Instrumentation Data Link, Equipment Maintenance Port, Point-to-Point Serial Communication.

🖥️

Legacy RS-232 Console Interface

The MAX232EWE.C70401 fits a legacy console connection where a 5 V controller must communicate through a conventional RS-232 port. Its two driver channels carry outgoing serial data, while two receiver channels support incoming control or status messages. Operation from a +5 V supply and support for data rates up to 120kbps provide ample performance for common console baud rates. The 16-pin SOIC package also keeps the interface compact compared with larger discrete driver and receiver arrangements. Confirm the exact C70401 pin assignment and connector-side net names from the manufacturer documentation before layout release.

🏭

Industrial Controller Serial Port

The MAX232EWE.C70401 is appropriate for an industrial controller that exposes a service or configuration port through RS-232. The two-driver and two-receiver arrangement allows bidirectional communication without separate interface ICs, while the specified 120kbps maximum rate supports common serial-control traffic when the cable and loading conditions are acceptable. Its +5 V supply operation integrates naturally with 5 V control logic. Because industrial cables can introduce ESD and ground-potential problems, use the recommended interface layout and add appropriate connector-side protection rather than relying solely on the IC.

🔧

Test and Measurement Equipment

MAX232EWE.C70401 can translate a controller’s logic-level UART into the voltage levels expected by RS-232 test equipment. The manufacturer rates the MAX232E family for data rates up to 120kbps when loaded and for EIA/TIA-232E and CCITT V.28 interface specifications. This makes the IC useful in programmable instruments, laboratory interfaces, and service ports where an established RS-232 device is connected to a modern embedded controller. Keep the cable-side traces away from sensitive measurement circuitry and follow the manufacturer’s recommended charge-pump and decoupling layout.

📟

Instrumentation Data Link

The MAX232EWE.C70401 suits instrumentation that must exchange commands and measurements with a host over RS-232. Two transmit and two receive channels allow more than one direction to be implemented in a single package, while the 120kbps rated rate exceeds the throughput typically needed for periodic telemetry. Using the IC in a +5 V system simplifies the logic-side connection to a compatible UART. Validate cable length, grounding, receiver thresholds, and connector protection for the installation because those system-level factors determine practical reliability outside the IC package.

🔧

Equipment Maintenance Port

MAX232EWE.C70401 provides a practical interface for a maintenance or diagnostic port on embedded equipment. A service adapter can connect its logic-level UART to the equipment through the MAX232E’s RS-232 drivers and receivers, enabling configuration, firmware-status exchange, and basic diagnostics. The integrated 2/2 transceiver arrangement reduces the number of separate interface components, and the 16-pin SOIC package supports compact board layouts. Ensure the service connector includes suitable ESD protection and that the selected baud rate remains compatible with the full cable and loading path.

🌐

Point-to-Point Serial Communication

The MAX232EWE.C70401 works for short point-to-point links between two logic systems using RS-232 cabling. Its separate transmitter and receiver channels support full-duplex communication, while its +5 V operation and 120kbps capability cover many control, status, and low-bandwidth data exchanges. The EIA/TIA-232E and CCITT V.28 compatibility stated by Analog Devices provides a familiar electrical target for the cable side. Designers should still follow the recommended board layout, observe the interface’s loading limits, and verify grounding and connector-pin conventions between the two connected systems.

What is MAX232EWE.C70401?
MAX232EWE.C70401 is a +5 V-powered RS-232 transceiver from Analog Devices with two driver channels and two receiver channels in a 16-pin SOIC package. According to the Analog Devices MAX232E product page, the MAX232E family meets EIA/TIA-232E and CCITT V.28 specifications when loaded and supports data rates up to 120kbps. It is intended for interfaces that require RS-232 level translation between logic-level circuitry and a serial port.
What are the key specifications of MAX232EWE.C70401?
The key specifications of MAX232EWE.C70401 are a +5 V supply, two RS-232 drivers, two RS-232 receivers, a maximum data rate of 120kbps, and a 16-pin SOIC package. The Analog Devices MAX232E product page also states that the family complies with EIA/TIA-232E and CCITT V.28 specifications when loaded. These specifications make it suitable for conventional RS-232 equipment, control interfaces, and instrumentation links.
Where can I download the MAX232EWE.C70401 datasheet PDF?
The official MAX232E product page is the best starting point for the MAX232EWE.C70401 datasheet and package information. Analog Devices identifies the MAX232E as a +5 V-powered multichannel RS-232 driver and receiver family and provides MAX202E and MAX232E options in several 16-pin packages. Use the exact ordering-code appendix when confirming which pinout and package details apply to the C70401 configuration.
Where can I find the MAX232EWE.C70401 pinout?
Use the pin-description table and package drawing in the Analog Devices MAX232E documentation for the exact MAX232EWE.C70401 pin assignment. The device is available in a 16-pin SOIC package, but the ordered suffix and package option determine the final pin configuration. Do not infer exposed-pad or no-connect details from a similarly named device, and verify the ordering information before assigning PCB tracks or connector nets.
What data rate does MAX232EWE.C70401 support?
MAX232EWE.C70401 supports RS-232 data rates up to 120kbps. Analog Devices states that the MAX232E drivers and receivers meet EIA/TIA-232E and CCITT V.28 specifications at rates up to 120kbps when loaded. The practical throughput also depends on cable length, baud-rate tolerance, receiver loading, connector integrity, and the performance of the controller connected to the logic side.
Is MAX232EWE.C70401 suitable for a 5 V microcontroller UART?
MAX232EWE.C70401 is suitable for a 5 V logic system that needs a conventional RS-232 port. The IC provides separate driver and receiver channels for bidirectional RS-232 communication and operates from a +5 V supply. The attached UART must use logic-level TX and RX signals compatible with the MAX232E, while the cable-facing side operates at RS-232 bipolar voltage levels.
What can replace MAX232EWE.C70401 on the same PCB?
MAX232EWE+ is the closest documented same-family drop-in candidate because it retains the MAX232E electrical role and 16-pin SOIC package. However, the C70401 ordering suffix must still be checked against the exact purchased-device documentation before substitution. The cross-reference search did not establish five verified, distinct drop-in equivalents, so other RS-232 transceivers should not be treated as replacements without package and pin verification.
Is MAX232EWE+ the same as MAX232EWE.C70401?
MAX232EWE+ and MAX232EWE.C70401 are not interchangeable solely because both identify the MAX232E family. MAX232EWE+ is documented as an updated or enhanced MAX232EWE variant in the same SOIC-16 package, while C70401 is an additional ordering suffix associated with this target. Confirm the manufacturer ordering table, package drawing, and pin description before using one as a drop-in replacement.
When should I choose MAX232EWE.C70401 over MAX232EWE+?
Choose MAX232EWE.C70401 when the approved BOM or supply plan specifically identifies the C70401 ordering code. Choose MAX232EWE+ only after its exact ordering details have been matched against the original device and PCB footprint. Both appear in the MAX232E 16-pin SOIC family, but the additional C70401 suffix requires careful qualification before substitution.
MAX232EWE.C70401 vs MAX232EWE+ - which is better for a legacy RS-232 port?
MAX232EWE.C70401 and MAX232EWE+ both provide the core MAX232E function of two RS-232 drivers and two receivers in a 16-pin SOIC package. The documented difference is that MAX232EWE+ is an enhanced or updated version of MAX232EWE, with manufacturing-process or supply-chain improvements. For an existing C70401-qualified design, retain the specified MPN unless purchasing and engineering teams approve a documented substitution.
Where can I buy MAX232EWE.C70401 online?
Use the Request a Quote form on this page to request MAX232EWE.C70401 pricing, stock confirmation, and lead time from XAIPART. The search results identify the exact C70401 part and report in-stock status, but they do not provide a complete quantity-break price table for the exact ordering code. A current quotation should therefore be requested before budgeting, scheduling production, or placing a purchase order.
What is the price of MAX232EWE.C70401?
Current MAX232EWE.C70401 pricing must be requested through the Request a Quote form on this page. The search result shows a starting price statement for the exact part, but it does not state an explicit one-piece quantity tier or provide a reproducible multi-quantity price schedule. The platform should render any approved quantity tiers separately so that the displayed commercial data remains current.
What is the lead time and stock status of MAX232EWE.C70401?
MAX232EWE.C70401 is reported as in stock by one search result, while a distributor cross-reference identifies one distributor for the part. Current lead time, available quantity, and order-on-request status should be confirmed through the Request a Quote form on this page. Stock messages can change rapidly, and a general search result is not a reservation of inventory.
What standards does MAX232EWE.C70401 comply with?
The MAX232E family meets EIA/TIA-232E and CCITT V.28 specifications when loaded, according to the Analog Devices MAX232E product page. EIA/TIA-232E describes the RS-232 electrical interface, while CCITT V.28 defines the interface characteristics used by CCITT V-series serial communications. These interface standards are distinct from environmental or automotive qualification such as AEC-Q100.
Does MAX232EWE.C70401 need an external RS-232 connector?
MAX232EWE.C70401 provides the electrical level translation but does not include the external connector or physical protection normally found in a complete RS-232 port. The PCB still needs an appropriate connector, signal routing, grounding strategy, and any required surge or ESD protection. The MAX232E interface operates from +5 V and supports rates up to 120kbps under the manufacturer’s stated loaded conditions.

کے لیے انجینئرنگ ریفرنس ڈیٹا MAX232EWE.C70401 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Select MAX232EWE.C70401 when the approved design or BOM specifically requires the C70401 ordering code for a +5 V, dual-driver, dual-receiver RS-232 interface. The 16-pin SOIC package, 120kbps capability, and stated EIA/TIA-232E and CCITT V.28 compliance make it appropriate for legacy consoles, instrumentation, industrial service ports, and point-to-point serial links. MAX232EWE+ is the closest documented same-family option when its exact ordering and qualification details are approved. MAX232EWE is the original family option and can be considered when its revision, sourcing, and procurement requirements are acceptable. No cross-brand drop-in equivalent was established by the available cross-reference results, so an engineer should not assume that another RS-232 transceiver in a 16-pin package has equivalent pin behavior, supply requirements, or operating characteristics.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ MAX232EWE+ MAX232EWE
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC
Brand Analog Devices Analog Devices Analog Devices
Product Function +5 V RS-232 transceiver +5 V RS-232 transceiver +5 V RS-232 transceiver
Driver Channels 2 2 2
Receiver Channels 2 2 2
Maximum Data Rate 120kbps 120kbps 120kbps
Supply Voltage +5 V +5 V +5 V
Interface Standards EIA/TIA-232E and CCITT V.28 when loaded EIA/TIA-232E and CCITT V.28 when loaded EIA/TIA-232E and CCITT V.28 when loaded

اہم امتیازی خصوصیات

  • Two complete transmit and receive paths in one IC (بمقابلہMAX232EWE+)
  • Supports up to 120kbps under the manufacturer’s loaded condition (بمقابلہMAX232EWE)
  • Single +5 V implementation with established RS-232 specifications (بمقابلہMAX232EWE)

ڈیزائن نوٹس

Follow the manufacturer’s recommended charge-pump and RS-232 layout for the exact 16-pin SOIC variant. Place the specified input and charge-pump capacitors adjacent to their designated pins, keep the protected pin and charge-pump nodes compact, and avoid routing sensitive signals through the noisy region around the internal switching node. Assign the connector-side nets directly from the pin-description table rather than from a generic MAX232 drawing.

Treat the cable-facing RS-232 nets as bipolar, high-impedance signal paths and keep them away from clocks, ADC inputs, references, and other sensitive analog nodes. Provide the specified bypass capacitance at the supply pins and use a short return-path-aware connector layout. Although the family supports rates up to 120kbps when loaded, practical margin depends on cable length, receiver loading, baud-rate tolerance, and connector construction.

Do not treat MAX232EWE, MAX232EWE+, and MAX232EWE.C70401 as automatically interchangeable solely because the package name is identical. Confirm the ordering suffix, revision, pin description, temperature grade, and supply details before replacing a released BOM item. Also verify RS-232 connector DTE and DCE pin assignments at the system level, because a valid level translator does not by itself guarantee correct connector wiring.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The manufacturer states EIA/TIA-232E and CCITT V.28 interface compliance when loaded. No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was established for this ordering code.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-09 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

MAX232EWE.C70401 datasheet MAX232EWE.C70401 pinout MAX232EWE.C70401 equivalent MAX232EWE.C70401 replacement MAX232EWE.C70401 price MAX232EWE.C70401 stock MAX232EWE.C70401 footprint MAX232EWE.C70401 application circuit MAX232EWE.C70401 vs MAX232EWE+ Analog Devices MAX232EWE.C70401 MAX232EWE 16-SOIC RS-232 MAX232EWE 120kbps RS-232 transceiver

متعلقہ اجزاء اور اصطلاحات

Analog Devices MAX232EWE.C70401 MAX232EWE+ MAX232EWE RS-232 transceiver interface IC driver and receiver RS-232 EIA/TIA-232E CCITT V.28 SOIC-16 surface mount semiconductor 5 V power supply 120kbps data rate charge pump logic-level UART industrial serial communication test and measurement legacy RS-232 console RS-232 driver channel RS-232 receiver channel EIA/TIA-232 surface-mount technology
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں