Maxim Integrated

MAX306CWI+ - 16:1 Precision Analog Multiplexer | Maxim

MPN: MAX306CWI+ ✓ فعال
4.5 V to 30 V Vdss <100 Ω Rds(on) SOIC-Wide-28 (SO28-W) Package
MOQ: 1 |

MAX306CWI+ جائزہ

The Maxim MAX306CWI+ is a precision, monolithic CMOS analog multiplexer with one 16:1 switch, less than 100 Ω on-resistance, and operation from a single 4.5 V to 30 V supply in a 28-pin wide SOIC package. The device supports bidirectional analog-channel routing and maintains channel-to-channel on-resistance matching within 5 Ω across the specified analog signal range.

An analog multiplexer is a switch matrix that connects one of several input terminals to a common output. In the MAX306 family, this switching function forms part of the interface-IC hierarchy: analog switch, multiplexer, signal-routing interface, and ultimately the wider semiconductor and test-and-measurement signal-chain categories. The MAX306 provides a single 16-channel selection arrangement, while the related MAX307 family is identified as a dual 8-channel multiplexer.

Low on-resistance is important because every closed switch contributes series resistance that can attenuate the measured or transferred signal. The MAX306/MAX307 family combines a maximum on-resistance of less than 100 Ω with matching within 5 Ω between channels and flatness of no more than 7 Ω over the specified analog signal range. This consistency helps preserve channel-to-channel accuracy in precision signal-routing systems.

The device also provides low leakage, with off-state input leakage below 2.5 nA at +85 °C, and fast switching, with transition time below 250 ns. Its improved 44 V silicon-gate process supports extremely low charge injection below 10 pC, reducing the control-signal-induced voltage step that can create errors in sampled analog measurements. ESD protection greater than 2000 V adds handling robustness for the analog terminals.

Typical uses include automated test equipment, data-acquisition systems, instrumentation, communication equipment, and precision analog signal selection. The wide-SOIC form factor supports surface-mount assembly while providing 28 pins for the 16-channel multiplexer and its associated control and address functions. Board-level designs still require validation of logic levels, address timing, signal bandwidth, and input protection against the exact operating conditions.

For a new layout, route each analog channel as a short, impedance-controlled trace and place the device close to the source or measurement circuitry. Keep digital address and control traces away from sensitive analog paths, observe the specified supply range, and verify transition behavior at the intended clock rate. Confirm the complete pin assignment and exposed electrical limits in the manufacturer datasheet before fabrication.

This page combines the manufacturer product information with a focused engineering assessment of switching performance, leakage, charge injection, application fit, and package considerations. It also distinguishes a verified same-package substitute from unavailable alternatives, helping designers assess replacement risk without treating a merely similar multiplexer as a drop-in device.

کے لیے ڈراپ اِن متبادل MAX306CWI+ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

MAX306CWI

✅ ڈراپ-اِن
📦 SOIC-Wide-28 (SO28-W)
On-resistance is listed as 100 Ω for both parts; the distinguishing attribute is the ordering suffix, so production, marking, and qualification requirements must be rechecked before substitution.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MAX306CWI+ تفصیلات

Product Type Precision CMOS analog multiplexer
Number of Circuits 1 circuit
Multiplexer Configuration 16:1
Number of Channels 16 channels
On-Resistance <100 Ω
On-Resistance Matching Between Channels <5 Ω
On-Resistance Flatness Over Analog Signal Range <7 Ω
Off-State Input Leakage <2.5 nA at +85 °C
Transition Time <250 ns
Charge Injection <10 pC
ESD Protection >2000 V
Supply Voltage Range 4.5 V to 30 V
Process Technology 44 V silicon-gate CMOS process
آپریٹنگ درجہ حرارت رینج 0 °C to +70 °C
پیکیج SOIC-Wide-28 (SO28-W)
ماؤنٹنگ ٹائپ Surface mount
Signal Direction Bidirectional analog channel

MAX306CWI+ soic-wide-28 (so28-w) پن کنفیگریشن گائیڈ

MAX306CWI+ (soic-wide-28 (so28-w) پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

MAX306CWI+ کے لیے soic-wide-28 (so28-w) پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MAX306CWI+.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

MAX306CWI+ کے لیے موزوں ہے 6 ایپلیکیشنs: Automated Test Equipment, Precision Data Acquisition, Instrumentation Signal Selection, Industrial Control Monitoring, Communication Signal Routing, Sensor Signal Multiplexing.

🔧

Automated Test Equipment

The MAX306CWI+ is well suited to selecting test channels in automated measurement systems because its 16:1 configuration consolidates multiple analog inputs into a common path. On-resistance below 100 Ω limits attenuation, while channel matching within 5 Ω supports consistent measurements across different test points. Transition time below 250 ns allows the mux to follow digital selection commands rapidly, although fixture capacitance and measurement bandwidth determine the final settling time.

📊

Precision Data Acquisition

For multi-channel data-acquisition systems, the MAX306CWI+ can route sensor or conditioned measurement signals into a shared amplifier or converter input. Its on-resistance flatness of no more than 7 Ω reduces signal-dependent channel error, while off-state leakage below 2.5 nA at +85 °C helps prevent unselected inputs from loading sensitive sources. The 4.5 V to 30 V single-supply range also supports laboratory and industrial signal-chain designs.

📟

Instrumentation Signal Selection

The MAX306CWI+ can connect multiple external inputs to a precision instrument front end while preserving consistent channel resistance. Its bidirectional analog channels allow the device to support signal-routing arrangements beyond a one-way input multiplexer. Charge injection below 10 pC is particularly useful when minimizing switching transients at the input of a sensitive measurement amplifier, provided the address driver and source impedance also meet the application requirements.

🏭

Industrial Control Monitoring

MAX306CWI+ applications can include monitoring several analog control or sensor lines with a common controller input. The 28-pin wide SOIC package is suitable for surface-mount industrial boards, and the 4.5 V to 30 V supply range accommodates 24 V-class systems when the logic and analog input levels are designed correctly. Engineers should add suitable protection and verify the device's operating-temperature requirements for the final enclosure environment.

🌐

Communication Signal Routing

The MAX306CWI+ can route low-frequency analog communication paths through a programmable 16:1 selection matrix. Its below-250 ns transition time supports relatively fast path changes, while low leakage helps isolate unselected channels. For higher-frequency signals, the complete datasheet frequency-response, capacitance, and dynamic-characteristic curves must be checked because the basic on-resistance figures alone do not establish usable bandwidth.

🧩

Sensor Signal Multiplexing

The MAX306CWI+ can multiplex several sensor outputs when maintaining low insertion resistance and consistent channel behavior is important. Leakage below 2.5 nA at +85 °C limits bias leakage into high-impedance sources, and charge injection below 10 pC reduces control-induced disturbances at the selected sensor node. The design should still account for sensor impedance, settling requirements, protection-network leakage, and the mux's own input capacitance.

تجویز کردہ پروڈکٹس کا خلاصہ

MAX306CWI Same-family 16:1 analog multiplexer alternative استعمال ہوتا ہے: Automated Test Equipment, Precision Data Acquisition, Instrumentation Signal Selection, Industrial Control Monitoring, Communication Signal Routing, Sensor Signal Multiplexing
What is the MAX306CWI+?
The MAX306CWI+ is a precision, monolithic CMOS analog multiplexer that routes one of 16 analog terminals through a 16:1 switch arrangement. According to the Maxim MAX306/MAX307 datasheet, it provides on-resistance below 100 Ω, channel matching within 5 Ω, and a 28-pin wide SOIC package. It is intended for precision signal-routing, instrumentation, and test-system applications.
What is the operating voltage of MAX306CWI+?
The MAX306CWI+ operates from a single 4.5 V to 30 V supply. The MAX306/MAX307 datasheet identifies the family as operating with a single supply, while the complete product listing identifies MAX306CWI+ as a 28-SOIC analog switch. Designers should include supply decoupling close to the device and maintain all control and analog voltages within the specified operating limits.
What is the on-resistance of MAX306CWI+?
The MAX306CWI+ has an on-resistance below 100 Ω. According to the Maxim MAX306/MAX307 datasheet, its on-resistance remains matched to within 5 Ω between channels and varies by no more than 7 Ω over the specified analog signal range. These figures are important in measurement systems because switch resistance can create attenuation, gain error, and channel-to-channel calibration differences.
How fast is the MAX306CWI+ analog switch?
The MAX306CWI+ has a transition time below 250 ns. The Maxim MAX306/MAX307 datasheet lists this value as tTRANS, making the device suitable for high-speed analog selection within automated test and data-acquisition systems. Actual system settling time can also depend on control timing, channel capacitance, source impedance, and the bandwidth of the downstream measurement amplifier.
Is MAX306CWI+ suitable for precision measurement systems?
Yes, the MAX306CWI+ is suitable for precision measurement systems because it combines less than 100 Ω on-resistance, channel matching within 5 Ω, leakage below 2.5 nA at +85 °C, and charge injection below 10 pC. These characteristics reduce resistance-induced error, leakage-induced bias, and control-induced transients when the mux connects external sensors, instrumentation, or test channels.
Where can I download the MAX306CWI+ datasheet PDF?
The official MAX306CWI+ datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/MAX306-MAX307.pdf. The document covers the MAX306/MAX307 precision analog-multiplexer family, including on-resistance, leakage, switching time, charge injection, ESD protection, electrical characteristics, and package information.
Where can I find the MAX306CWI+ pinout?
The MAX306CWI+ pinout is shown in the pin-configuration section of the official MAX306/MAX307 datasheet. The component uses a 28-pin wide SOIC package, and the pin-description table should be used directly when assigning address inputs, control signals, analog terminals, supply pins, and grounds on a PCB.
What is the best drop-in replacement for MAX306CWI+?
The verified same-package substitute is MAX306CWI, which uses the same 28-pin wide SOIC format and is listed as a 16:1, 100 Ω analog switch. The suffix distinction should still be checked against production, temperature, marking, and purchasing requirements before substitution. No additional same-package alternatives with independently verified pin compatibility were found.
Can MAX306CWI replace MAX306CWI+?
MAX306CWI can be considered as a same-package alternative to MAX306CWI+ because both are listed in 28-SOIC packages as 16:1 analog switches with 100 Ω on-resistance. The manufacturer family data supports functional equivalence at the family level. Before approving the change, verify the ordering suffix, temperature grade, lifecycle status, and exact exposed electrical limits.
MAX306CWI+ vs MAX306CPI+ — which one is drop-in compatible?
MAX306CWI+ and MAX306CPI+ are not direct drop-in alternatives because their mounting methods and packages differ. MAX306CWI+ uses a surface-mount SOIC-Wide-28 package, while MAX306CPI+ uses a through-hole PDIP-28 package. Although both belong to the MAX306 family, a PCB designed for one generally requires a footprint and assembly-process change for the other.
When should I choose MAX306CWI+ instead of MAX307?
Choose MAX306CWI+ when the system needs one 16:1 analog multiplexer rather than the dual 8-channel arrangement associated with the MAX307 family. The MAX306CWI+ offers a 16-channel selection matrix in a 28-pin wide SOIC package. MAX307 may be preferable when two independent 8-channel selections provide a better fit for the routing architecture.
Where can I buy MAX306CWI+ and check current availability?
Use the Request a Quote form on this page to ask about MAX306CWI+ availability, quantity requirements, and delivery timing. The form allows a buyer to request current sourcing information without embedding a volatile price or stock claim in the product description. Confirm the exact ordering code and manufacturing status when the quotation is returned.
What is the current price of MAX306CWI+?
Current pricing for MAX306CWI+ is best obtained through the Request a Quote form on this page. The structured pricing fields are reserved for quantity-break listings that explicitly identify this exact MPN, while the product copy avoids presenting a potentially stale price as a current quotation. Submit the required quantity, packaging preference, and delivery destination with the request.
What is the lead time for MAX306CWI+?
The current lead time for MAX306CWI+ should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, production status, package availability, and destination, so it should not be inferred from a general catalog listing. The quotation response should be used for planning and production scheduling.
What are the key specifications of MAX306CWI+ that engineers should know?
The key MAX306CWI+ specifications are a 16:1 configuration, 16 channels, less than 100 Ω on-resistance, channel matching within 5 Ω, less than 250 ns transition time, and charge injection below 10 pC. The Maxim MAX306/MAX307 datasheet also specifies operation from 4.5 V to 30 V, bidirectional analog switching, and a 28-pin wide SOIC package for surface-mount assembly.
Is MAX306CWI+ RoHS compliant and automotive qualified?
The RoHS and AEC-Q100 status of MAX306CWI+ must be confirmed from the current manufacturer product documentation before compliance-sensitive release. The available ordering information identifies the commercial 0 °C to +70 °C version in a 28-pin wide SOIC package, but it does not by itself establish automotive qualification or a specific REACH declaration.
What does a best Analog Devices equivalent for MAX306CWI+ look like?
A best replacement must match the 28-pin wide SOIC footprint, 16:1 topology, supply range, address/control interface, analog bandwidth, leakage, and on-resistance. The verified substitute in this case is the same-brand MAX306CWI. No cross-brand part was independently confirmed as both pin-to-pin compatible and parametrically equivalent, so an unverified competitor MPN would not be a responsible drop-in recommendation.

کے لیے انجینئرنگ ریفرنس ڈیٹا MAX306CWI+ — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose MAX306CWI+ when the design needs a 16:1 precision CMOS analog multiplexer in a 28-pin wide surface-mount SOIC package. Its sub-100 Ω on-resistance, within-5 Ω channel matching, low leakage, and less than 250 ns transition time make it suitable for automated test, instrumentation, data acquisition, and controlled analog-routing systems. MAX306CWI is the verified same-package alternative when its ordering suffix, production status, marking requirements, and qualification are acceptable. MAX306CPI+ is not a drop-in option because its PDIP-28 package requires a different footprint and through-hole assembly process. MAX307 should be considered when a dual 8-channel arrangement fits the system better. No cross-brand equivalent was independently confirmed as pin-to-pin and parametrically equivalent, so changing manufacturers should require a fresh review of pinout, timing, logic levels, analog characteristics, and lifecycle status.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ MAX306CWI
Brand Maxim Integrated Maxim Integrated
Package SOIC-Wide-28 (SO28-W) 28-SOIC
Mounting Type Surface mount Surface mount
Multiplexer Configuration 16:1 16:1
Number of Channels 16 channels 16 channels
Number of Circuits 1 circuit 1 circuit
On-Resistance <100 Ω 100 Ω

اہم امتیازی خصوصیات

  • Verified 16-channel routing in a surface-mount package (بمقابلہMAX306CWI)
  • Low channel-to-channel resistance mismatch (بمقابلہMAX306CWI)
  • Fast switching with low charge injection (بمقابلہMAX306CWI)

ڈیزائن نوٹس

Treat the selected analog path as a resistance-and-capacitance network. The MAX306CWI+ has on-resistance below 100 Ω, so source impedance and downstream input capacitance can create an RC settling time after address switching. Place the multiplexer close to the receiving amplifier, use short analog traces, and validate settling at the actual signal bandwidth rather than relying only on the specified transition time of less than 250 ns.

Keep address and control routing away from sensitive analog nets to reduce capacitive coupling and charge-injection artifacts. Use a solid ground reference under and around the device where the layout rules permit, maintain short return paths for supply and ground pins, and follow the manufacturer pin-configuration and layout guidance exactly. Although charge injection is below 10 pC, system-level error can still be amplified by high source impedance or high-gain downstream circuitry.

Operate the device from a single supply within the specified 4.5 V to 30 V range and verify that every control and analog terminal remains inside its operating limits. Place the supply bypass capacitor close to the relevant power pins and provide a low-impedance ground connection. Do not infer logic-level compatibility from the supply range alone; confirm the address and control thresholds in the manufacturer electrical-characteristics table.

Do not treat MAX306CPI+ as a drop-in substitute for MAX306CWI+. The CPI version uses a through-hole PDIP-28 package, whereas the CWI+ version uses a surface-mount SOIC-Wide-28 package. Likewise, a mux with the same channel count is not necessarily pin compatible unless its address inputs, control polarity, analog-terminal assignments, and supply characteristics match the target footprint.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The available product information identifies the MAX306CWI+ as a commercial-temperature 28-SOIC analog multiplexer but does not explicitly establish the requested compliance declarations. AEC-Q100 is treated as not applicable to this non-automotive commercial-temperature ordering code; confirm current environmental and material declarations before compliance-sensitive release.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-14 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

MAX306CWI+ datasheet MAX306CWI+ datasheet pdf MAX306CWI+ pinout MAX306CWI+ specifications Maxim MAX306CWI+ MAX306CWI+ equivalent MAX306CWI+ replacement MAX306CWI+ cross reference MAX306CWI+ vs MAX306CWI MAX306CWI+ SOIC-28 footprint MAX306CWI+ price MAX306CWI+ stock

متعلقہ اجزاء اور اصطلاحات

Maxim Integrated MAX306CWI+ MAX306CWI MAX306 MAX307 precision analog multiplexer analog multiplexer CMOS analog switch interface IC 16:1 multiplexer bidirectional analog channel on-resistance charge injection transition time off-state leakage 44 V silicon-gate CMOS process SOIC-Wide-28 28-SOIC surface mount automated test equipment precision instrumentation data acquisition sensor multiplexing
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں