MAX306CWI+ - 16:1 Precision Analog Multiplexer | Maxim
料号: MAX306CWI+ ✓ 量产中MAX306CWI+ 概述
An analog multiplexer is a switch matrix that connects one of several input terminals to a common output. In the MAX306 family, this switching function forms part of the interface-IC hierarchy: analog switch, multiplexer, signal-routing interface, and ultimately the wider semiconductor and test-and-measurement signal-chain categories. The MAX306 provides a single 16-channel selection arrangement, while the related MAX307 family is identified as a dual 8-channel multiplexer.
Low on-resistance is important because every closed switch contributes series resistance that can attenuate the measured or transferred signal. The MAX306/MAX307 family combines a maximum on-resistance of less than 100 Ω with matching within 5 Ω between channels and flatness of no more than 7 Ω over the specified analog signal range. This consistency helps preserve channel-to-channel accuracy in precision signal-routing systems.
The device also provides low leakage, with off-state input leakage below 2.5 nA at +85 °C, and fast switching, with transition time below 250 ns. Its improved 44 V silicon-gate process supports extremely low charge injection below 10 pC, reducing the control-signal-induced voltage step that can create errors in sampled analog measurements. ESD protection greater than 2000 V adds handling robustness for the analog terminals.
Typical uses include automated test equipment, data-acquisition systems, instrumentation, communication equipment, and precision analog signal selection. The wide-SOIC form factor supports surface-mount assembly while providing 28 pins for the 16-channel multiplexer and its associated control and address functions. Board-level designs still require validation of logic levels, address timing, signal bandwidth, and input protection against the exact operating conditions.
For a new layout, route each analog channel as a short, impedance-controlled trace and place the device close to the source or measurement circuitry. Keep digital address and control traces away from sensitive analog paths, observe the specified supply range, and verify transition behavior at the intended clock rate. Confirm the complete pin assignment and exposed electrical limits in the manufacturer datasheet before fabrication.
This page combines the manufacturer product information with a focused engineering assessment of switching performance, leakage, charge injection, application fit, and package considerations. It also distinguishes a verified same-package substitute from unavailable alternatives, helping designers assess replacement risk without treating a merely similar multiplexer as a drop-in device.
直接替换替代料: MAX306CWI+ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
MAX306CWI
✅ 直接替换📋 参考替代料(不在目录中)
MAX306CWI+ 规格参数
| Product Type | Precision CMOS analog multiplexer |
| Number of Circuits | 1 circuit |
| Multiplexer Configuration | 16:1 |
| Number of Channels | 16 channels |
| On-Resistance | <100 Ω |
| On-Resistance Matching Between Channels | <5 Ω |
| On-Resistance Flatness Over Analog Signal Range | <7 Ω |
| Off-State Input Leakage | <2.5 nA at +85 °C |
| Transition Time | <250 ns |
| Charge Injection | <10 pC |
| ESD Protection | >2000 V |
| Supply Voltage Range | 4.5 V to 30 V |
| Process Technology | 44 V silicon-gate CMOS process |
| 工作温度范围 | 0 °C to +70 °C |
| 封装 | SOIC-Wide-28 (SO28-W) |
| 安装类型 | Surface mount |
| Signal Direction | Bidirectional analog channel |
MAX306CWI+ soic-wide-28 (so28-w) 引脚配置指南
MAX306CWI+(soic-wide-28 (so28-w) 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: MAX306CWI+.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MAX306CWI+ 适用于 6 应用s: Automated Test Equipment, Precision Data Acquisition, Instrumentation Signal Selection, Industrial Control Monitoring, Communication Signal Routing, Sensor Signal Multiplexing.
Automated Test Equipment
The MAX306CWI+ is well suited to selecting test channels in automated measurement systems because its 16:1 configuration consolidates multiple analog inputs into a common path. On-resistance below 100 Ω limits attenuation, while channel matching within 5 Ω supports consistent measurements across different test points. Transition time below 250 ns allows the mux to follow digital selection commands rapidly, although fixture capacitance and measurement bandwidth determine the final settling time.
推荐
Precision Data Acquisition
For multi-channel data-acquisition systems, the MAX306CWI+ can route sensor or conditioned measurement signals into a shared amplifier or converter input. Its on-resistance flatness of no more than 7 Ω reduces signal-dependent channel error, while off-state leakage below 2.5 nA at +85 °C helps prevent unselected inputs from loading sensitive sources. The 4.5 V to 30 V single-supply range also supports laboratory and industrial signal-chain designs.
推荐
Instrumentation Signal Selection
The MAX306CWI+ can connect multiple external inputs to a precision instrument front end while preserving consistent channel resistance. Its bidirectional analog channels allow the device to support signal-routing arrangements beyond a one-way input multiplexer. Charge injection below 10 pC is particularly useful when minimizing switching transients at the input of a sensitive measurement amplifier, provided the address driver and source impedance also meet the application requirements.
推荐
Industrial Control Monitoring
MAX306CWI+ applications can include monitoring several analog control or sensor lines with a common controller input. The 28-pin wide SOIC package is suitable for surface-mount industrial boards, and the 4.5 V to 30 V supply range accommodates 24 V-class systems when the logic and analog input levels are designed correctly. Engineers should add suitable protection and verify the device's operating-temperature requirements for the final enclosure environment.
推荐
Communication Signal Routing
The MAX306CWI+ can route low-frequency analog communication paths through a programmable 16:1 selection matrix. Its below-250 ns transition time supports relatively fast path changes, while low leakage helps isolate unselected channels. For higher-frequency signals, the complete datasheet frequency-response, capacitance, and dynamic-characteristic curves must be checked because the basic on-resistance figures alone do not establish usable bandwidth.
推荐
Sensor Signal Multiplexing
The MAX306CWI+ can multiplex several sensor outputs when maintaining low insertion resistance and consistent channel behavior is important. Leakage below 2.5 nA at +85 °C limits bias leakage into high-impedance sources, and charge injection below 10 pC reduces control-induced disturbances at the selected sensor node. The design should still account for sensor impedance, settling requirements, protection-network leakage, and the mux's own input capacitance.
推荐
推荐产品汇总
工程参考数据: MAX306CWI+ ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MAX306CWI |
|---|---|---|
| Brand | Maxim Integrated | Maxim Integrated |
| Package | SOIC-Wide-28 (SO28-W) | 28-SOIC |
| Mounting Type | Surface mount | Surface mount |
| Multiplexer Configuration | 16:1 | 16:1 |
| Number of Channels | 16 channels | 16 channels |
| Number of Circuits | 1 circuit | 1 circuit |
| On-Resistance | <100 Ω | 100 Ω |
关键差异点
- Verified 16-channel routing in a surface-mount package (对比 MAX306CWI)
- Low channel-to-channel resistance mismatch (对比 MAX306CWI)
- Fast switching with low charge injection (对比 MAX306CWI)
设计说明
Treat the selected analog path as a resistance-and-capacitance network. The MAX306CWI+ has on-resistance below 100 Ω, so source impedance and downstream input capacitance can create an RC settling time after address switching. Place the multiplexer close to the receiving amplifier, use short analog traces, and validate settling at the actual signal bandwidth rather than relying only on the specified transition time of less than 250 ns.
Keep address and control routing away from sensitive analog nets to reduce capacitive coupling and charge-injection artifacts. Use a solid ground reference under and around the device where the layout rules permit, maintain short return paths for supply and ground pins, and follow the manufacturer pin-configuration and layout guidance exactly. Although charge injection is below 10 pC, system-level error can still be amplified by high source impedance or high-gain downstream circuitry.
Operate the device from a single supply within the specified 4.5 V to 30 V range and verify that every control and analog terminal remains inside its operating limits. Place the supply bypass capacitor close to the relevant power pins and provide a low-impedance ground connection. Do not infer logic-level compatibility from the supply range alone; confirm the address and control thresholds in the manufacturer electrical-characteristics table.
Do not treat MAX306CPI+ as a drop-in substitute for MAX306CWI+. The CPI version uses a through-hole PDIP-28 package, whereas the CWI+ version uses a surface-mount SOIC-Wide-28 package. Likewise, a mux with the same channel count is not necessarily pin compatible unless its address inputs, control polarity, analog-terminal assignments, and supply characteristics match the target footprint.
合规信息
The available product information identifies the MAX306CWI+ as a commercial-temperature 28-SOIC analog multiplexer but does not explicitly establish the requested compliance declarations. AEC-Q100 is treated as not applicable to this non-automotive commercial-temperature ordering code; confirm current environmental and material declarations before compliance-sensitive release.