MAX3232IDBR - 250kbps Dual RS-232 Transceiver | Texas Instruments
MPN: MAX3232IDBR ✓ فعالMAX3232IDBR جائزہ
An RS-232 transceiver is an interface IC that converts digital logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic-compatible levels. The MAX3232 belongs to the line-driver/receiver hierarchy within interface ICs, providing the physical communication layer between a host, microcontroller, or industrial controller and an RS-232 peripheral.
The dual architecture provides two drivers and two receivers in one device, reducing the number of external interface components required for bidirectional serial links. Its 250 kbps maximum data rate supports conventional RS-232 equipment, while the 3 V to 5.5 V operating range accommodates both 3.3 V and 5 V systems. The ±15 kV ESD rating strengthens protection against electrostatic discharge at exposed serial ports.
The MAX3232IDBR uses an on-chip charge-pump circuit to generate the positive and negative voltage levels required by RS-232. Charge-pump capacitors and the supply bypass capacitor must be connected according to the manufacturer datasheet. Because these switching elements can produce ripple on the power rail, power and return connections should be arranged to prevent coupling into sensitive analog or timing circuitry.
Typical uses include industrial serial controllers, point-of-sale terminals, data-acquisition equipment, instrumentation, and service interfaces for microcontrollers. The device is particularly appropriate when two RS-232 channels must fit into a compact PCB area and the system operates from a 3.3 V or 5 V supply.
When laying out the circuit, place charge-pump and bypass capacitors close to their designated pins and keep the RS-232 driver outputs away from sensitive receiver inputs. Provide adequate ground and power-return paths to reduce ground bounce when the drivers switch between positive and negative RS-232 levels.
This product overview combines electrical characteristics, lifecycle information, drop-in replacement choices, comparison data, and practical layout guidance to support faster RS-232 interface design and sourcing.
کے لیے ڈراپ اِن متبادل MAX3232IDBR — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MAX3232IDBR (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Number of Drivers, Number of Receivers, ESD Protection, Operating Temperature.
MAX3232EIDBR
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MAX3232ECDBR
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MAX3232CDBR
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MAX3232AIDBR
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MAX3232MIDBR
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MAX3232IDBR تفصیلات
| Product Type | Dual RS-232 line driver/receiver |
| Number of Drivers | 2 channels |
| Number of Receivers | 2 channels |
| Maximum Data Rate | 250 kbps |
| Supply Voltage Range | 3 V to 5.5 V |
| ESD Protection | ±15 kV |
| آپریٹنگ درجہ حرارت رینج | -40°C to +85°C |
| پیکیج | 16-pin SSOP (DB) |
| Package Width | 5.30 mm |
| Package Length | 0.209 inch |
| ماؤنٹنگ ٹائپ | Surface mount |
| Moisture Sensitivity Level | MSL 1 at 260°C/ unlimited floor life |
| RoHS Compliance | RoHS3 compliant |
| REACH Compliance | Not specified |
| لائف سائیکل کی حالت | Active |
| Manufacturer Lead Time | 6 weeks |
| Automotive Qualification | Not specified |
MAX3232IDBR پن کنفیگریشن
| پن 1 | VCC — Supply voltage input |
| پن 2 | R1OUT — Receiver 1 output |
| پن 3 | R1IN — Receiver 1 input |
| پن 4 | R2IN — Receiver 2 input |
| پن 5 | R2OUT — Receiver 2 output |
| پن 6 | GND — Ground connection |
| پن 7 | V+ — Charge-pump capacitor connection for positive voltage |
| پن 8 | V- — Charge-pump capacitor connection for negative voltage |
| پن 9 | T1IN — Driver 1 input |
| پن 10 | T1OUT — Driver 1 output |
| پن 11 | T2IN — Driver 2 input |
| پن 12 | T2OUT — Driver 2 output |
| پن 13 | VCC — Supply voltage input |
| پن 14 | GND — Ground connection |
| پن 15 | C1+ — Charge-pump flying capacitor positive connection |
| پن 16 | C1- — Charge-pump flying capacitor negative connection |
عام استعمالات
MAX3232IDBR کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Serial Controller Interface, Microcontroller RS-232 Communication, Point-of-Sale Terminal Connectivity, Data Acquisition Equipment, Instrumentation and Test Equipment, Embedded Service and Configuration Port.
Industrial Serial Controller Interface
The MAX3232IDBR suits industrial controllers that need two protected RS-232 communication channels without allocating separate driver and receiver ICs. Its two-driver, two-receiver configuration supports bidirectional links to equipment such as controllers, service ports, and data-acquisition modules. The 250 kbps data rate is appropriate for conventional RS-232 equipment, while operation from -40°C to +85°C covers industrial temperature requirements. A 3.3 V or 5 V system can power the transceiver within its specified 3 V to 5.5 V supply range. The ±15 kV ESD protection adds resilience at externally accessible ports, although the board still needs suitable enclosure grounding and protection practices.
تجویز کردہ
Microcontroller RS-232 Communication
The MAX3232IDBR provides a practical interface between a microcontroller's logic-level UART and an RS-232 port. Two driver channels can transmit commands to two peripherals, while two receiver channels can collect responses from the same or separate devices. Operation from 3 V to 5.5 V allows use with both common MCU supply domains, and the 250 kbps rate exceeds the throughput of many legacy control protocols. The internal charge pumps produce the positive and negative voltages required by RS-232, so the application circuit must include the capacitors specified by the manufacturer datasheet.
تجویز کردہ
Point-of-Sale Terminal Connectivity
The MAX3232IDBR can connect a point-of-sale terminal or peripheral to legacy RS-232 equipment using two protected communication channels. The dual-driver and dual-receiver organization allows bidirectional command and status traffic while conserving PCB area compared with separate line-driver and receiver packages. Its 250 kbps capability supports common retail peripherals and service interfaces, and the 3 V to 5.5 V range supports embedded systems operating from either 3.3 V or 5 V. The compact 16-pin SSOP package is useful when connector placement and enclosure space are constrained.
تجویز کردہ
Data Acquisition Equipment
The MAX3232IDBR is suitable for linking data-acquisition instruments, laboratory controllers, and service interfaces that use RS-232. Two receive channels can collect status or measurement-control signals from two instruments, while two transmit channels can send commands or configuration data. The 250 kbps rate is more than sufficient for many low-bandwidth laboratory protocols. Operating temperature extends to -40°C to +85°C, and the ±15 kV ESD rating is valuable when cables connect to equipment outside a controlled enclosure. Correct charge-pump capacitor placement is essential for stable operation and reduced supply ripple.
تجویز کردہ
Instrumentation and Test Equipment
The MAX3232IDBR fits compact instrumentation platforms that require a wired RS-232 control interface. The device converts logic-level UART signals to RS-232 levels and back, allowing a digital controller to communicate with meters, programmable supplies, or legacy test fixtures. Its two channels can support separate command and status paths, while 250 kbps operation is well matched to ASCII-based and short binary protocols. The 3 V to 5.5 V supply range provides flexibility across mixed-generation instrument architectures. For sensitive analog sections, route charge-pump current and high-swing driver outputs away from sensitive traces.
تجویز کردہ
Embedded Service and Configuration Port
The MAX3232IDBR can implement an embedded service port that remains accessible for configuration, diagnostics, or firmware recovery. Two RS-232 channels allow one path for service traffic and another for an auxiliary instrument or sensor. The low 250 kbps operating ceiling is suitable for these administrative functions rather than high-speed bulk transfer. The 16-pin SSOP package supports compact embedded boards, and operation across 3 V to 5.5 V helps designers reuse the interface across several processor platforms. A protected connector, chassis-referenced ground strategy, and compliance with the ESD rating's test conditions should accompany the implementation.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MAX3232IDBR — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | MAX3232EIDBR | MAX3232ECDBR | MAX3232CDBR | MAX3232AIDBR | MAX3232MIDBR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | SSOP-16 (DB) | SSOP-16 (DB) - same | SSOP-16 (DB) - same | SSOP-16 (DB) - same | SSOP-16 (DB) - same | SSOP-16 (DB) - same |
| Product Type | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver |
| Drivers | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Receivers | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Maximum Data Rate | 250 kbps | 250 kbps | 250 kbps | 250 kbps | 250 kbps | 250 kbps |
| Supply Voltage | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | Approximately 5 V fixed supply | Approximately 3.3 V fixed supply |
| Operating Temperature | -40°C to +85°C | -40°C to +85°C | Commercial temperature grade | Commercial temperature grade | -40°C to +85°C | -40°C to +85°C |
| Design Recommendation | Original-family device | TI-recommended improved direct drop-in replacement | Enhanced family option with commercial temperature grade | Commercial-temperature family option | Fixed 5 V supply option | Fixed 3.3 V supply option |
اہم امتیازی خصوصیات
- Broad supply compatibility (بمقابلہMAX3232AIDBR)
- 3.3 V and 5 V system flexibility (بمقابلہMAX3232MIDBR)
- Manufacturer-recommended upgrade path (بمقابلہMAX3232EIDBR)
- Compact dual-channel integration (بمقابلہMAX3232ECDBR)
ڈیزائن نوٹس
Place the charge-pump capacitors and supply bypass capacitor directly beside their associated MAX3232IDBR pins, with short ground returns and no intervening vias where practical. Keep the switching charge-pump loop compact because its current transients can couple into nearby analog circuitry. Route the two RS-232 driver outputs away from receiver inputs and sensitive measurement nodes, and provide a direct chassis or signal-ground return at the external connector.
Do not treat the MAX3232AIDBR and MAX3232MIDBR as automatic substitutes for the broad 3 V to 5.5 V MAX3232IDBR: their fixed supply domains require a specific rail. Likewise, the C-family temperature grade must satisfy the enclosure's minimum ambient temperature. Before replacing the original device, compare every operating limit, the required charge-pump capacitance, and the receiver and driver timing characteristics in the manufacturer datasheets.
Follow the capacitor values and stability requirements listed in the Texas Instruments datasheet. The internal charge pumps generate positive and negative RS-232 voltages by switching the supply current, so a shared supply rail can exhibit ripple even though the logic-side interface is digital. Decouple the transceiver locally, provide adequate source current, and separate its return path from high-current actuator and motor-driver returns.
تعمیل کی معلومات
The device is identified as RoHS3 compliant. MSL 1 at 260°C with unlimited floor life is stated. Automotive qualification, REACH status, lead-free status, halogen-free status, and conflict-minerals status are not specified for this ordering code.