Texas Instruments

MAX3232IDBR - 250kbps Dual RS-232 Transceiver | Texas Instruments

料号: MAX3232IDBR ✓ 量产中
3 V to 5.5 V Vdss 16-pin SSOP (DB) Package
最小起订量: 1 |

MAX3232IDBR 概述

The Texas Instruments MAX3232IDBR is a dual-channel RS-232 line driver and receiver rated for 250 kbps operation, 3 V to 5.5 V supply voltage, and ±15 kV ESD protection. The device is packaged in a 16-pin SSOP (DB) package and operates from -40°C to +85°C.

An RS-232 transceiver is an interface IC that converts digital logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic-compatible levels. The MAX3232 belongs to the line-driver/receiver hierarchy within interface ICs, providing the physical communication layer between a host, microcontroller, or industrial controller and an RS-232 peripheral.

The dual architecture provides two drivers and two receivers in one device, reducing the number of external interface components required for bidirectional serial links. Its 250 kbps maximum data rate supports conventional RS-232 equipment, while the 3 V to 5.5 V operating range accommodates both 3.3 V and 5 V systems. The ±15 kV ESD rating strengthens protection against electrostatic discharge at exposed serial ports.

The MAX3232IDBR uses an on-chip charge-pump circuit to generate the positive and negative voltage levels required by RS-232. Charge-pump capacitors and the supply bypass capacitor must be connected according to the manufacturer datasheet. Because these switching elements can produce ripple on the power rail, power and return connections should be arranged to prevent coupling into sensitive analog or timing circuitry.

Typical uses include industrial serial controllers, point-of-sale terminals, data-acquisition equipment, instrumentation, and service interfaces for microcontrollers. The device is particularly appropriate when two RS-232 channels must fit into a compact PCB area and the system operates from a 3.3 V or 5 V supply.

When laying out the circuit, place charge-pump and bypass capacitors close to their designated pins and keep the RS-232 driver outputs away from sensitive receiver inputs. Provide adequate ground and power-return paths to reduce ground bounce when the drivers switch between positive and negative RS-232 levels.

This product overview combines electrical characteristics, lifecycle information, drop-in replacement choices, comparison data, and practical layout guidance to support faster RS-232 interface design and sourcing.

直接替换替代料: MAX3232IDBR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: MAX3232IDBR (相同外形与封装尺寸) ——差异在于 Package, Number of Drivers, Number of Receivers, ESD Protection, Operating Temperature.

Texas Instruments
Package: 16-SSOP, 5.30 mm width
Number of Drivers: 2
Number of Receivers: 2
对比 MAX3232IDBR →
Texas Instruments
Package: 16-SSOP (DB, 0.209 in / 5.30 mm width)
Number of Drivers: 2
Number of Receivers: 2
对比 MAX3232IDBR →

MAX3232EIDBR

✅ 直接替换 ⚠️ 规格未核验
📦 SSOP-16 (DB)
Improved MAX3232E family device with the same 3 V to 5.5 V and 250 kbps key ratings and identical 16-pin SSOP footprint; feature differences are 0 V at the headline voltage and data-rate ratings.

📋 参考替代料(不在目录中)

MAX3232ECDBR

✅ 直接替换 ⚠️ 规格未核验
📦 SSOP-16 (DB)
Enhanced MAX3232E family variant with the same 3 V to 5.5 V and 250 kbps headline ratings; the commercial-temperature C grade differs from the target's -40°C to +85°C range.

📋 参考替代料(不在目录中)

MAX3232CDBR

✅ 直接替换 ⚠️ 规格未核验
Texas Instruments
📦 SSOP-16 (DB)
RS-232 line driver/receiver transceiver · 2 · 2 · 3 V to 5.5 V · 250 kbit/s · 5 V logic · 300 uA · 0.1 uF

联系询价

查看数据手册 →

MAX3232AIDBR

✅ 直接替换 ⚠️ 规格未核验
📦 SSOP-16 (DB)
Same dual RS-232 architecture and 16-pin SSOP footprint, but the A-family supply domain is approximately 5 V rather than the target's full 3 V to 5.5 V range.

📋 参考替代料(不在目录中)

MAX3232MIDBR

✅ 直接替换 ⚠️ 规格未核验
📦 SSOP-16 (DB)
Same dual RS-232 architecture and 16-pin SSOP footprint, but the M-family supply domain is approximately 3.3 V rather than the target's full 3 V to 5.5 V range.

📋 参考替代料(不在目录中)

MAX3232IDBR 规格参数

Product Type Dual RS-232 line driver/receiver
Number of Drivers 2 channels
Number of Receivers 2 channels
Maximum Data Rate 250 kbps
Supply Voltage Range 3 V to 5.5 V
ESD Protection ±15 kV
工作温度范围 -40°C to +85°C
封装 16-pin SSOP (DB)
Package Width 5.30 mm
Package Length 0.209 inch
安装类型 Surface mount
Moisture Sensitivity Level MSL 1 at 260°C/ unlimited floor life
RoHS Compliance RoHS3 compliant
REACH Compliance Not specified
生命周期状态 Active
Manufacturer Lead Time 6 weeks
Automotive Qualification Not specified

MAX3232IDBR 引脚配置

SSOP-16 Package Pinout Diagram SSOP-16 3.9x6.0mm, P0.635mm, JEDEC MO-150. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SSOP-16
引脚 1 VCC — Supply voltage input
引脚 2 R1OUT — Receiver 1 output
引脚 3 R1IN — Receiver 1 input
引脚 4 R2IN — Receiver 2 input
引脚 5 R2OUT — Receiver 2 output
引脚 6 GND — Ground connection
引脚 7 V+ — Charge-pump capacitor connection for positive voltage
引脚 8 V- — Charge-pump capacitor connection for negative voltage
引脚 9 T1IN — Driver 1 input
引脚 10 T1OUT — Driver 1 output
引脚 11 T2IN — Driver 2 input
引脚 12 T2OUT — Driver 2 output
引脚 13 VCC — Supply voltage input
引脚 14 GND — Ground connection
引脚 15 C1+ — Charge-pump flying capacitor positive connection
引脚 16 C1- — Charge-pump flying capacitor negative connection

典型应用

MAX3232IDBR 适用于 6 应用s: Industrial Serial Controller Interface, Microcontroller RS-232 Communication, Point-of-Sale Terminal Connectivity, Data Acquisition Equipment, Instrumentation and Test Equipment, Embedded Service and Configuration Port.

🏭

Industrial Serial Controller Interface

The MAX3232IDBR suits industrial controllers that need two protected RS-232 communication channels without allocating separate driver and receiver ICs. Its two-driver, two-receiver configuration supports bidirectional links to equipment such as controllers, service ports, and data-acquisition modules. The 250 kbps data rate is appropriate for conventional RS-232 equipment, while operation from -40°C to +85°C covers industrial temperature requirements. A 3.3 V or 5 V system can power the transceiver within its specified 3 V to 5.5 V supply range. The ±15 kV ESD protection adds resilience at externally accessible ports, although the board still needs suitable enclosure grounding and protection practices.

🔧

Microcontroller RS-232 Communication

The MAX3232IDBR provides a practical interface between a microcontroller's logic-level UART and an RS-232 port. Two driver channels can transmit commands to two peripherals, while two receiver channels can collect responses from the same or separate devices. Operation from 3 V to 5.5 V allows use with both common MCU supply domains, and the 250 kbps rate exceeds the throughput of many legacy control protocols. The internal charge pumps produce the positive and negative voltages required by RS-232, so the application circuit must include the capacitors specified by the manufacturer datasheet.

🖥️

Point-of-Sale Terminal Connectivity

The MAX3232IDBR can connect a point-of-sale terminal or peripheral to legacy RS-232 equipment using two protected communication channels. The dual-driver and dual-receiver organization allows bidirectional command and status traffic while conserving PCB area compared with separate line-driver and receiver packages. Its 250 kbps capability supports common retail peripherals and service interfaces, and the 3 V to 5.5 V range supports embedded systems operating from either 3.3 V or 5 V. The compact 16-pin SSOP package is useful when connector placement and enclosure space are constrained.

📡

Data Acquisition Equipment

The MAX3232IDBR is suitable for linking data-acquisition instruments, laboratory controllers, and service interfaces that use RS-232. Two receive channels can collect status or measurement-control signals from two instruments, while two transmit channels can send commands or configuration data. The 250 kbps rate is more than sufficient for many low-bandwidth laboratory protocols. Operating temperature extends to -40°C to +85°C, and the ±15 kV ESD rating is valuable when cables connect to equipment outside a controlled enclosure. Correct charge-pump capacitor placement is essential for stable operation and reduced supply ripple.

🔧

Instrumentation and Test Equipment

The MAX3232IDBR fits compact instrumentation platforms that require a wired RS-232 control interface. The device converts logic-level UART signals to RS-232 levels and back, allowing a digital controller to communicate with meters, programmable supplies, or legacy test fixtures. Its two channels can support separate command and status paths, while 250 kbps operation is well matched to ASCII-based and short binary protocols. The 3 V to 5.5 V supply range provides flexibility across mixed-generation instrument architectures. For sensitive analog sections, route charge-pump current and high-swing driver outputs away from sensitive traces.

📺

Embedded Service and Configuration Port

The MAX3232IDBR can implement an embedded service port that remains accessible for configuration, diagnostics, or firmware recovery. Two RS-232 channels allow one path for service traffic and another for an auxiliary instrument or sensor. The low 250 kbps operating ceiling is suitable for these administrative functions rather than high-speed bulk transfer. The 16-pin SSOP package supports compact embedded boards, and operation across 3 V to 5.5 V helps designers reuse the interface across several processor platforms. A protected connector, chassis-referenced ground strategy, and compliance with the ESD rating's test conditions should accompany the implementation.

推荐产品汇总

MAX3232EIDBR Enhanced same-footprint RS-232 transceiver for new designs 用于: Industrial Serial Controller Interface, Microcontroller RS-232 Communication, Data Acquisition Equipment, Embedded Service and Configuration Port MAX3232CDBR Texas Instruments 用于: Industrial Serial Controller Interface, Point-of-Sale Terminal Connectivity, Instrumentation and Test Equipment MAX3232EIDR Texas Instruments 用于: Microcontroller RS-232 Communication, Data Acquisition Equipment, Embedded Service and Configuration Port MAX3232ECDR Texas Instruments 用于: Point-of-Sale Terminal Connectivity MAX3232ECDBR Enhanced same-footprint family alternative 用于: Instrumentation and Test Equipment
What is the operating voltage of MAX3232IDBR?
The MAX3232IDBR operates from 3 V to 5.5 V, allowing it to interface with both 3.3 V and 5 V digital systems. According to the Texas Instruments product page and manufacturer datasheet, the dual RS-232 transceiver also supports data rates up to 250 kbps. Its broad supply range makes it suitable for industrial controllers, embedded systems, and legacy RS-232 equipment where the logic supply may be either 3.3 V or 5 V.
What are the key specifications of MAX3232IDBR that engineers should know?
The MAX3232IDBR is a 2-driver, 2-receiver RS-232 transceiver operating from 3 V to 5.5 V at up to 250 kbps. The Texas Instruments product page identifies ±15 kV ESD protection, a 16-pin SSOP package, and an operating-temperature range of -40°C to +85°C. These specifications make the device appropriate for compact, industrial bidirectional serial interfaces requiring protected RS-232 links.
Where can I download the MAX3232IDBR datasheet PDF?
The MAX3232IDBR datasheet is available through the official Texas Instruments product page for MAX3232IDBR. The manufacturer describes the device as a 3 V to 5.5 V, dual-channel, 250 kbps RS-232 line driver/receiver with ±15 kV ESD protection. Use the datasheet pin-description table, electrical-characteristics tables, and application circuit when assigning pins and selecting the required charge-pump and bypass capacitors.
Where can I find the MAX3232IDBR pinout?
The MAX3232IDBR pinout is identified in the manufacturer datasheet and corresponds to the 16-pin SSOP (DB) package. It includes separate driver inputs and outputs, receiver inputs and outputs, supply and ground connections, charge-pump terminals, and capacitor connections. Use the pin-description table in the Texas Instruments datasheet when assigning PCB tracks and confirm the exposed package orientation against the land pattern.
Is MAX3232IDBR suitable for industrial RS-232 equipment?
Yes, the MAX3232IDBR is suitable for industrial RS-232 interfaces because it is rated for -40°C to +85°C operation, 3 V to 5.5 V supply voltage, and ±15 kV ESD protection. According to the Texas Instruments manufacturer datasheet, the device supports 250 kbps communication through two driver and two receiver channels. It is therefore appropriate for industrial controllers, data-acquisition units, and service ports exposed to electrostatic discharge.
How does MAX3232IDBR compare with MAX3232EIDBR?
The MAX3232EIDBR is the improved MAX3232-family member that Texas Instruments identifies as a direct drop-in replacement for MAX3232 devices in new designs. Both provide the same basic dual-channel RS-232 function and use the 16-pin SSOP (DB) footprint, making the EIDBR the preferred choice when its enhanced device characteristics are desired. The MAX3232IDBR remains appropriate for existing qualified designs that specifically call out the original device.
When should I choose MAX3232IDBR over MAX3232EIDBR?
Choose MAX3232IDBR when maintaining an existing design that specifically lists the original MAX3232 device and has completed qualification for that part. Choose MAX3232EIDBR for new RS-232 designs because Texas Instruments recommends the MAX3232E as an improved direct drop-in replacement. Both use the same 16-pin SSOP footprint, so the decision is primarily whether preserving the originally qualified component or adopting the recommended family member is more important.
What is the best drop-in replacement for MAX3232IDBR?
The MAX3232EIDBR is the best-supported drop-in replacement because Texas Instruments describes the MAX3232E as an improved direct replacement for MAX3232 and both parts use the 16-pin SSOP (DB) package. The MAX3232ECDBR and MAX3232CDBR are additional same-footprint family options, although their qualification and temperature characteristics should be checked against the original system requirements before substitution.
Can MAX3232CDBR replace MAX3232IDBR in an existing PCB?
The MAX3232CDBR uses the same 16-pin SSOP footprint and can be considered a pin-compatible family alternative, but it should not be substituted without checking operating-temperature requirements and qualification status. The MAX3232IDBR is specified for -40°C to +85°C, whereas the C-family designation denotes a different temperature grade. For an unrestricted industrial-temperature upgrade, the MAX3232EIDBR is the clearer choice.
What can replace MAX3232IDBR on the same PCB footprint?
The MAX3232EIDBR, MAX3232ECDBR, and MAX3232CDBR are same-brand SSOP-16 family options for a MAX3232IDBR board, with the EIDBR explicitly recommended by Texas Instruments as an improved direct drop-in replacement. The MAX3232AIDBR and MAX3232MIDBR can also follow the same pin arrangement, but their fixed supply domains differ from the target's 3 V to 5.5 V range. Verify every electrical limit before replacement.
Is MAX3232IDBR the same as MAX3232EIDBR?
No. The MAX3232IDBR and MAX3232EIDBR are related but distinct MAX3232-family devices. The MAX3232EIDBR is the enhanced device that Texas Instruments recommends for new designs as a direct drop-in replacement, whereas the MAX3232IDBR is the original 3 V to 5.5 V, 250 kbps, dual-channel version rated from -40°C to +85°C. They share the 16-pin SSOP footprint but should not be treated as identical without a qualification review.
What is the best Texas Instruments equivalent for MAX3232IDBR?
The MAX3232EIDBR is the preferred Texas Instruments equivalent for new designs because the manufacturer identifies the MAX3232E as an improved direct drop-in replacement for MAX3232. It retains the 16-pin SSOP (DB) package and the familiar dual-driver, dual-receiver RS-232 architecture. Verify charge-pump capacitor values, absolute maximum ratings, and operating-temperature requirements against the original design during substitution.
Where to buy MAX3232IDBR online?
Use the Request a Quote form on this page to request MAX3232IDBR availability, current lead time, and a quantity quotation. The Texas Instruments product page lists the device as active, and a distributor listing reports a standard manufacturer lead time of 6 weeks. For prototype or production planning, submit the required quantity, package variant, and target delivery date with the request.
What is the price of MAX3232IDBR?
Request a current quotation for MAX3232IDBR through the Request a Quote form on this page. The product is offered as an active Texas Instruments device in a 16-pin SSOP package, with a listed standard lead time of 6 weeks. Including the required order quantity and delivery schedule in the request enables the buyer to receive the most current commercial response.
What is the lead time and stock status for MAX3232IDBR?
The listed standard lead time for MAX3232IDBR is 6 weeks, and the manufacturer identifies the device as active. Inventory availability can change with order quantity and purchasing conditions, so use the Request a Quote form on this page for a current stock confirmation and delivery commitment. State the required quantity, target date, and whether unopened production quantities are needed.
Does MAX3232IDBR meet RoHS and automotive qualification requirements?
The MAX3232IDBR is identified as RoHS3 compliant and operates from -40°C to +85°C. Its moisture-sensitivity classification is MSL 1 at 260°C with unlimited floor life. Automotive qualification is not specified for this ordering code, so an AEC-Q100-qualified variant should be selected when an automotive supply requirement applies. REACH and halogen-free status should be confirmed for the exact procurement configuration.

工程参考数据: MAX3232IDBR ——对比、设计指导和合规信息。

选型指南

Choose the MAX3232IDBR when maintaining an existing 16-pin SSOP design that specifically calls out the original dual RS-232 transceiver and requires operation from 3 V to 5.5 V over -40°C to +85°C. For new designs, the MAX3232EIDBR is generally preferable because Texas Instruments identifies MAX3232E as an improved direct drop-in replacement while retaining the same package and headline voltage and data-rate ratings. Consider the MAX3232ECDBR or MAX3232CDBR only when their commercial temperature grade satisfies the ambient requirements. The MAX3232AIDBR is appropriate when the board has a fixed 5 V rail, while the MAX3232MIDBR suits a fixed 3.3 V rail. Every substitute requires verification of pin functions, capacitor values, operating limits, and system qualification.

与替代料对比

参数 本产品 MAX3232EIDBR MAX3232ECDBR MAX3232CDBR MAX3232AIDBR MAX3232MIDBR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package SSOP-16 (DB) SSOP-16 (DB) - same SSOP-16 (DB) - same SSOP-16 (DB) - same SSOP-16 (DB) - same SSOP-16 (DB) - same
Product Type Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver
Drivers 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Receivers 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Maximum Data Rate 250 kbps 250 kbps 250 kbps 250 kbps 250 kbps 250 kbps
Supply Voltage 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V Approximately 5 V fixed supply Approximately 3.3 V fixed supply
Operating Temperature -40°C to +85°C -40°C to +85°C Commercial temperature grade Commercial temperature grade -40°C to +85°C -40°C to +85°C
Design Recommendation Original-family device TI-recommended improved direct drop-in replacement Enhanced family option with commercial temperature grade Commercial-temperature family option Fixed 5 V supply option Fixed 3.3 V supply option

关键差异点

  • Broad supply compatibility (对比 MAX3232AIDBR)
  • 3.3 V and 5 V system flexibility (对比 MAX3232MIDBR)
  • Manufacturer-recommended upgrade path (对比 MAX3232EIDBR)
  • Compact dual-channel integration (对比 MAX3232ECDBR)

设计说明

Place the charge-pump capacitors and supply bypass capacitor directly beside their associated MAX3232IDBR pins, with short ground returns and no intervening vias where practical. Keep the switching charge-pump loop compact because its current transients can couple into nearby analog circuitry. Route the two RS-232 driver outputs away from receiver inputs and sensitive measurement nodes, and provide a direct chassis or signal-ground return at the external connector.

Do not treat the MAX3232AIDBR and MAX3232MIDBR as automatic substitutes for the broad 3 V to 5.5 V MAX3232IDBR: their fixed supply domains require a specific rail. Likewise, the C-family temperature grade must satisfy the enclosure's minimum ambient temperature. Before replacing the original device, compare every operating limit, the required charge-pump capacitance, and the receiver and driver timing characteristics in the manufacturer datasheets.

Follow the capacitor values and stability requirements listed in the Texas Instruments datasheet. The internal charge pumps generate positive and negative RS-232 voltages by switching the supply current, so a shared supply rail can exhibit ripple even though the logic-side interface is digital. Decouple the transceiver locally, provide adequate source current, and separate its return path from high-current actuator and motor-driver returns.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The device is identified as RoHS3 compliant. MSL 1 at 260°C with unlimited floor life is stated. Automotive qualification, REACH status, lead-free status, halogen-free status, and conflict-minerals status are not specified for this ordering code.

数据核验日期: 2026-11-17 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

MAX3232IDBR datasheet MAX3232IDBR pinout MAX3232IDBR datasheet pdf Texas Instruments MAX3232IDBR MAX3232IDBR equivalent MAX3232IDBR replacement MAX3232IDBR cross reference MAX3232IDBR vs MAX3232EIDBR MAX3232IDBR SSOP-16 footprint MAX3232IDBR application circuit MAX3232IDBR price MAX3232IDBR stock MAX3232IDBR 250kbps RS-232 MAX3232IDBR 3V to 5.5V MAX3232IDBR +/-15kV ESD

相关元器件 & 术语

Texas Instruments MAX3232IDBR MAX3232EIDBR MAX3232ECDBR MAX3232CDBR MAX3232AIDBR MAX3232MIDBR RS-232 transceiver RS-232 line driver RS-232 line receiver interface IC semiconductor dual-channel transceiver charge pump ESD protection RS-232 3.3 V logic 5 V logic 250 kbps serial communication SSOP-16 DB package surface mount RoHS MSL 1 industrial automation
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情