Analog Devices

MAX323EUA+ - Dual SPST Analog Switch | Analog Devices

MPN: MAX323EUA+ ✓ فعال
+2.7 V to +16 V Vdss 60 ohm Rds(on) 8-uMAX/uSOP Package
MOQ: 1 |

MAX323EUA+ جائزہ

Analog Devices MAX323EUA+ is a precision, dual, single-pole single-throw analog switch with two normally open switches, 60 ohm on-resistance, and an 8-uMAX/uSOP surface-mount package. The device operates from a single supply of 2.7 V to 16 V and is designed for low-power signal-routing systems where two independent switched paths are required. Its dual-SPST organization places one normally open switch in each of two independent channels, making the MAX323EUA+ suitable for controlling separate analog or digital signal paths.

An analog switch is an integrated semiconductor device that connects or disconnects an electrical signal under logic control. The broader hierarchy is analog switch to analog switch and multiplexer or multiplexer IC to interface IC to semiconductor. Unlike a mechanical relay, an integrated analog switch can change signal state electronically without mechanical wear. The SPST designation describes one independently controlled switch per channel, while the normally open configuration leaves the switched path disconnected until its control input is asserted.

The MAX323EUA+ provides two precision SPST switches in one 8-uMAX/uSOP package. Its specified 60 ohm on-resistance supports controlled signal attenuation and loading analysis in precision analog-routing circuits. The 2.7 V to 16 V single-supply range allows operation from low-voltage battery systems through higher-voltage industrial control rails. The manufacturer also identifies 5 µW power consumption as a key benefit for battery-powered equipment.

The MAX323 family combines precision analog switching with low power consumption. Its two channels are configured as normally open switches, which simplifies designs that require a default disconnected state. The 8-uMAX/uSOP package reduces board area compared with larger leaded or SOIC implementations. Because an analog switch contributes finite on-resistance, charge injection, leakage, and control-interface behavior, the surrounding source impedance, signal amplitude, switching speed, and power rails determine the practical system performance.

Typical uses include battery-powered test equipment, precision measurement front ends, industrial control interfaces, and portable instrumentation. In each case, the two channels can route separate low-frequency control or analog signals while the 2.7 V minimum supply supports common single-supply systems. The 16 V maximum supply also permits operation from higher-voltage control systems without requiring a negative supply rail.

PCB design should keep the switched signal traces short and place control and bypass components close to the relevant pins. The analog input and output paths should avoid unnecessary switching regulators and high-current digital traces because the MAX323EUA+ is intended for signal routing rather than power switching. Confirm the complete pin description, control logic, and recommended operating conditions in the manufacturer datasheet before finalizing the schematic.

This page organizes the confirmed switch configuration, supply range, on-resistance, low-power characteristic, package information, engineering use cases, and verified sourcing records into one design-oriented reference. It also distinguishes documented MAX323EUA+ characteristics from package-only family options so engineers can assess PCB reuse and replacement decisions without confusing function with footprint compatibility.

کے لیے ڈراپ اِن متبادل MAX323EUA+ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

MAX323EUA+ زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Number of Switches 2
Switch Configuration Dual SPST, normally open
On-Resistance 60 ohm
Supply Voltage Range +2.7 V to +16 V
Power Consumption 5 µW
پیکیج 8-uMAX/uSOP
ماؤنٹنگ ٹائپ Surface mount
پن کی تعداد 8 pins
Temperature Grade Industrial

MAX323EUA+ 8-umax/usop پن کنفیگریشن گائیڈ

MAX323EUA+ (8-umax/usop پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

MAX323EUA+ کے لیے 8-umax/usop پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MAX323EUA+.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

MAX323EUA+ کے لیے موزوں ہے 6 ایپلیکیشنs: Battery-Powered Measurement Instruments, Industrial Control Signal Routing, Precision Analog Test Points, Portable Sensor Signal Switching, Programmable Signal-Path Selection, Low-Power Embedded Control Interfaces.

🔋

Battery-Powered Measurement Instruments

The MAX323EUA+ suits portable measurement equipment that must route two independent signals while drawing very little power. Its two normally open SPST channels provide a default disconnected condition, and the stated 5 µW power consumption supports battery-operated operation. The single-supply range begins at +2.7 V, allowing the switches to share a low-voltage rail when the control and measurement circuitry also uses that rail. With a specified 60 ohm on-resistance, the MAX323EUA+ should be used for signal paths whose source and receiver impedances tolerate the resulting loading. It is better suited to precision control and measurement lines than to power switching or high-current loads.

🏭

Industrial Control Signal Routing

The MAX323EUA+ can control two separate low-level signal paths in industrial equipment because each SPST channel operates independently. Its +2.7 V to +16 V supply range accommodates both compact embedded systems and higher-voltage control environments, while the industrial temperature grade supports equipment designed for demanding operating conditions. The normally open topology is useful when a powered-off or default control state must leave the routed path disconnected. Designers should evaluate the 60 ohm on-resistance against the driven input impedance and keep switched traces short to reduce pickup. The device is intended for analog or logic routing rather than driving motors, relays, or high-current loads.

🧪

Precision Analog Test Points

The MAX323EUA+ is appropriate for precision analog test-point routing where two channels must be connected under electronic control. The 60 ohm on-resistance is the primary design consideration because it interacts with the source impedance and the input resistance of the selected test path. Its compact 8-uMAX/uSOP package helps conserve board area in dense instrumentation, while the dual SPST organization simplifies two-point or source-selection arrangements. The single-supply operation from +2.7 V to +16 V avoids a negative supply in many systems. For high-accuracy measurements, verify leakage, charge injection, off-isolation, and switching-time limits in the manufacturer data sheet for the actual signal amplitude and impedance.

📱

Portable Sensor Signal Switching

The MAX323EUA+ can switch sensor signals in a compact portable acquisition system where board area and standby consumption are important. Two normally open channels allow separate sensor or excitation paths to remain isolated until commanded, and the +2.7 V minimum supply supports integration with low-voltage mixed-signal systems. The specified 5 µW power characteristic is valuable when the instrument spends substantial time between measurements. The 60 ohm on-resistance must be included in the sensor-interface calculation, especially for high-impedance sources where leakage and loading can affect accuracy. Place the device close to the sensor connectors and keep sensitive routes away from switching power stages to preserve measurement integrity.

⚡

Programmable Signal-Path Selection

The MAX323EUA+ fits compact programmable signal-path selection because it provides two independently controlled, normally open SPST switches in one 8-uMAX/uSOP package. Control logic can determine whether each analog or low-frequency digital path is connected, while the default open state helps prevent unintended coupling between circuits. Single-supply operation from +2.7 V to +16 V allows common integration with modern control systems, and the 60 ohm on-resistance defines the insertion loss imposed on the selected path. The package should be placed near the routed nodes to minimize trace susceptibility. Confirm control levels, switching time, leakage, and charge injection against the system requirements before using the switch for precision multiplexing functions.

🧩

Low-Power Embedded Control Interfaces

The MAX323EUA+ is useful in embedded controllers that need to route two low-current signals without adding another relay or mechanical selector. Its 5 µW power consumption and single +2.7 V to +16 V operating range support low-power architecture, while the normally open channels allow reset, test, or enable lines to remain disconnected during default operation. The small 8-uMAX/uSOP package reduces routing congestion around the controller. Designers must include the 60 ohm on-resistance when calculating voltage division with downstream input impedance and should observe the control-input thresholds from the data sheet. This application concerns low-level signal routing; the switch should not be used to control power rails or devices whose load current exceeds the device's intended function.

تجویز کردہ پروڈکٹس کا خلاصہ

MAX323EUA Same MAX323 device offered with a different ordering suffix استعمال ہوتا ہے: Battery-Powered Measurement Instruments, Portable Sensor Signal Switching MAX323ESA MAX323 family option in a larger 8-pin SOIC package استعمال ہوتا ہے: Industrial Control Signal Routing, Programmable Signal-Path Selection MAX323CSA MAX323 family option identified in package comparison information استعمال ہوتا ہے: Precision Analog Test Points, Low-Power Embedded Control Interfaces
What is the MAX323EUA+?
The MAX323EUA+ is a precision, dual, single-supply SPST analog switch with two normally open channels in an 8-uMAX/uSOP package. Analog Devices identifies a 60 ohm on-resistance, a +2.7 V to +16 V operating range, and 5 µW power consumption. According to the manufacturer product page and data sheet, it is intended for low-power analog signal routing.
How many switches are in the MAX323EUA+?
The MAX323EUA+ contains two independent SPST analog switches, and both channels are normally open. This dual-channel arrangement allows one package to control two separate signal paths. According to the Analog Devices MAX323 product page, the MAX323 has two normally open switches, whereas the related MAX324 uses normally closed channels and the MAX325 combines one normally open and one normally closed channel.
What is the on-resistance of the MAX323EUA+?
The MAX323EUA+ has a specified on-resistance of 60 ohm. This resistance becomes part of the source and load network when a channel is closed, so the receiving circuit must account for attenuation and input-impedance interaction. The 60 ohm figure is stated in the Analog Devices product-page summary and distributor technical descriptions for the device.
What is the supply voltage range of MAX323EUA+?
The MAX323EUA+ operates from a single supply of +2.7 V to +16 V. This range supports low-voltage portable systems and higher-voltage industrial control environments without requiring a negative supply. According to the Analog Devices MAX323 family description, the MAX323 is designed specifically for single-supply operation across the +2.7 V to +16 V interval.
How much power does the MAX323EUA+ consume?
The MAX323EUA+ has a stated low-power characteristic of 5 µW. That low consumption makes the device suitable for battery-powered equipment in which permanent supply current affects operating time. The 5 µW figure is presented by Analog Devices as a principal feature of the precision, single-supply MAX323 family.
Where can I download the MAX323EUA+ datasheet PDF?
The official MAX323EUA+ documentation is available through the Analog Devices MAX323 product page at https://www.analog.com/en/products/MAX323.html. The manufacturer page links the MAX323 data sheet and product-selection information. Use the data sheet's pin-description table and recommended operating conditions when assigning PCB tracks and control logic.
Where can I find the MAX323EUA+ pinout?
The MAX323EUA+ pinout is published in the official MAX323 manufacturer data sheet linked from the Analog Devices product page. The device uses an 8-uMAX/uSOP package. Use the data sheet's pin-description table for the exact numbered pins, control inputs, common terminal, and switched-terminal assignments.
Is MAX323EUA+ suitable for battery-powered equipment?
Yes, the MAX323EUA+ is suitable for battery-powered equipment because it operates from +2.7 V to +16 V and has a stated 5 µW power-consumption characteristic. Its dual normally open SPST channels can route separate signals while preserving a default disconnected state. Analog Devices specifically identifies low power consumption as making the MAX323 family ideal for portable equipment.
What is the best drop-in replacement for MAX323EUA+?
The MAX323EUA+ should be replaced only with a part that has the same 8-uMAX/uSOP footprint, matching pin assignments and compatible electrical characteristics. No manufacturer-confirmed pin-to-pin substitute is identified for this exact suffix, and the MAX323ESA family uses a different package. Use the Request a Quote form on this page when sourcing the original MAX323EUA+ or requesting a documented drop-in match.
Can MAX323EUA+ be replaced by MAX323ESA+?
No, MAX323ESA+ is not a direct footprint replacement for MAX323EUA+ because MAX323EUA+ uses the 8-uMAX/uSOP package while MAX323ESA+ is listed in an 8-pin SOIC package. Although both belong to the MAX323 family, replacing one with the other requires a PCB change. Verify the target land pattern against the manufacturer pin and package drawings before considering any migration.
MAX323EUA+ vs MAX323ESA+ - which is better for a compact PCB?
MAX323EUA+ is the better choice when board area is the controlling constraint because it uses the compact 8-uMAX/uSOP package rather than the 8-pin SOIC package identified for MAX323ESA+. Both implement the dual SPST MAX323 function, but package size is not the only consideration. Confirm pin compatibility, land pattern, temperature requirements, and supply conditions before selecting a replacement.
When should I choose MAX323EUA+ over another dual SPST switch?
Choose MAX323EUA+ when the design needs two normally open SPST channels, a single supply from +2.7 V to +16 V, a 60 ohm on-resistance, and the compact 8-uMAX/uSOP footprint. Select a different device when the application requires normally closed contacts, lower on-resistance, faster switching, a different voltage range, or a package already established on the PCB.
Is MAX323EUA+ suitable for industrial control and test equipment?
Yes, the MAX323EUA+ is identified as an industrial-temperature-grade part and its +2.7 V to +16 V single-supply range is compatible with many industrial control systems. Its dual SPST topology supports two independent signal routes, while 5 µW power consumption is useful in portable test equipment. The complete operating-temperature limits and control thresholds should be confirmed in the manufacturer data sheet.
How do I buy MAX323EUA+ online and check its availability?
Use the Request a Quote form on this page to request the current MAX323EUA+ quotation, stock position, minimum order quantity, and expected lead time. The product is listed as production on the Analog Devices product page, but live inventory and transaction terms can change. A direct quote keeps the requested manufacturer part number and package configuration explicit.
What is the price of MAX323EUA+?
Use the Request a Quote form on this page for the current MAX323EUA+ price and quantity breaks. The price structure is generated from the selected supplier channel and may vary with order quantity, package, and sourcing conditions. Submit the target MPN MAX323EUA+ with the required quantity so the quotation reflects the exact configuration.
What are the key specifications of MAX323EUA+ that engineers should know?
The key MAX323EUA+ specifications are two normally open SPST switches, 60 ohm on-resistance, a +2.7 V to +16 V single-supply range, and 5 µW power consumption in an 8-uMAX/uSOP surface-mount package. Analog Devices classifies the MAX323 as a precision, single-supply switch family. These values define its principal fit for compact, low-power signal-routing designs.

کے لیے انجینئرنگ ریفرنس ڈیٹا MAX323EUA+ — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose MAX323EUA+ when the PCB needs two normally open, independently controlled SPST paths in a compact 8-uMAX/uSOP package. Its +2.7 V to +16 V single-supply range and 5 µW power characteristic are particularly useful in portable measurement and control equipment. The 60 ohm on-resistance must be acceptable for the selected source and receiver impedances. MAX323ESA and MAX323CSA are family alternatives with different package arrangements and should be selected only when their exact package, pinout, and electrical ratings match the design. If the application requires normally closed contacts, lower on-resistance, faster switching, or a larger current rating, compare another specified device rather than assuming a MAX323 suffix is interchangeable. For an existing MAX323EUA+ footprint, use a replacement that has the same 8-uMAX/uSOP land pattern and verified pin assignments.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Switch Count 2
Switch Configuration Dual SPST, normally open
On-Resistance 60 ohm
Supply Voltage Range +2.7 V to +16 V
Power Consumption 5 µW
Package 8-uMAX/uSOP
Brand Analog Devices
Mounting Type Surface mount

اہم امتیازی خصوصیات

  • Compact package for dual-channel routing (بمقابلہMAX323ESA)
  • Defined normally open dual-channel behavior (بمقابلہMAX323CSA)
  • Single-supply operation across portable and industrial rails (بمقابلہMAX323ESA)

ڈیزائن نوٹس

Include the specified 60 ohm on-resistance when calculating attenuation with the source impedance and receiving input impedance. For a high-impedance source, the switch resistance may be minor; for a low-impedance source, it can create a meaningful divider. Also verify off-isolation, leakage, and charge-injection limits in the manufacturer data sheet before using the channel for precision low-level signals.

Place the MAX323EUA+ close to the switched nodes and control logic to minimize sensitive trace length. Keep the two switched paths physically separated where crosstalk or capacitive coupling could affect a measurement, and route them away from high-current switching nodes. Provide local supply bypassing according to the family data sheet, and observe the package pin assignments and exposed-contact requirements exactly as drawn in the manufacturer documentation.

Design the control and supply rails for the stated +2.7 V to +16 V operating interval and account for the family's 5 µW power-consumption characteristic when estimating portable-system consumption. The device is a low-level analog switch, not a power switch. Do not use it for motors, solenoids, high-current loads, or direct relay-coil drive; use an appropriate driver stage for those loads.

Do not treat another MAX323 suffix as a footprint substitute without checking the package drawing. The MAX323EUA+ uses the 8-uMAX/uSOP package, whereas MAX323ESA-family listings identify an 8-pin SOIC package. Verify pin numbering, body dimensions, lead geometry, and land pattern before redesigning a PCB. A shared family name and function do not guarantee that a different package can be soldered onto the same footprint.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The manufacturer page identifies MAX323 as a production family, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was captured for the exact MAX323EUA+ ordering code.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-18 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

MAX323EUA+ datasheet MAX323EUA+ specifications MAX323EUA+ pinout MAX323EUA+ datasheet pdf Analog Devices MAX323EUA+ MAX323EUA+ 60 ohm switch MAX323EUA+ 2.7V 16V MAX323EUA+ 8-uMAX package MAX323EUA+ equivalent MAX323EUA+ replacement MAX323EUA+ drop-in substitute MAX323EUA+ vs MAX323ESA MAX323EUA+ price MAX323EUA+ application circuit

متعلقہ اجزاء اور اصطلاحات

Analog Devices MAX323EUA+ MAX323EUA MAX323ESA MAX323CSA MAX323 MAX324 MAX325 dual SPST analog switch normally open switch single-supply analog switch on-resistance signal routing interface IC semiconductor 8-uMAX uSOP surface-mount package battery-powered equipment precision analog switching
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں