MAX3243CDWRG4 - 3/5 RS-232 Transceiver | Texas Instruments
MPN: MAX3243CDWRG4 ✓ فعالMAX3243CDWRG4 جائزہ
An RS-232 transceiver is an interface IC used to connect equipment designed around the RS-232 standard to a digital system operating with lower logic voltages. The MAX3243 family combines multiple drivers and receivers in one package, reducing the number of separate interface components required for multiport serial equipment. Its 3-to-5.5 V supply range allows operation from common 3.3 V and 5 V system rails.
The three-driver and five-receiver arrangement is suitable for RS-232 connections that require more than one serial channel, including communications equipment, test systems, industrial controllers, and computer peripherals. The 250 kbps maximum signaling rate supports substantially faster data transfer than legacy serial-port equipment commonly designed for lower rates. Integrated ±15 kV human-body-model ESD protection improves system resilience when exposed connector pins encounter electrostatic discharge.
MAX3243CDWRG4 is identified as a full RS-232 transceiver with three drivers and five receivers. The manufacturer classifies it as a multichannel line driver/receiver, while the listed operating range allows operation with both 3 V and 5 V supply systems. Its 28-pin SOIC format supports conventional surface-mount assembly and is appropriate for designs where a single package must handle several RS-232 signal directions.
Typical uses include industrial serial-control equipment, instrumentation, data-acquisition systems, point-of-sale terminals, and embedded systems that retain an RS-232 interface. Because the device includes both drivers and receivers, it can support two fully independent RS-232 ports while also providing one additional receive channel and additional driver capacity when required by the system architecture.
For PCB implementation, place the device close to its RS-232 connector and route driver and receiver outputs as short, well-controlled signal paths. Decoupling capacitors should be connected to the supply and ground pins according to the manufacturer datasheet. The external connector and cable should also provide appropriate surge and ESD protection because the chip's internal HBM rating does not replace system-level connector protection.
This product record combines the manufacturer's electrical and packaging information with practical RS-232 design guidance. It also provides structured comparisons, replacement criteria, and application notes to help engineers evaluate integration, protection, channel count, and supply compatibility before assigning the MAX3243CDWRG4 to a PCB.
کے لیے ڈراپ اِن متبادل MAX3243CDWRG4 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MAX3243CDWRG4 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Product Type, ESD Protection, Maximum Data Rate, Package, Supply Voltage Range.
MAX3243EIDWRG4
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MAX3243IPWRDL
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MAX3243CDWR
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MAX3243EIDWR
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MAX3243CSE+
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MAX3243CDWRG4 تفصیلات
| Product Type | Multichannel RS-232 line driver/receiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| Number of Drivers | 3 |
| Number of Receivers | 5 |
| ESD Protection | ±15 kV HBM |
| پیکیج | 28-pin SOIC |
| ماؤنٹنگ ٹائپ | Surface mount |
| آپریٹنگ درجہ حرارت رینج | 0°C to 70°C |
| Transceiver Configuration | 3/5 full RS-232 transceiver |
MAX3243CDWRG4 28-pin soic پن کنفیگریشن گائیڈ
MAX3243CDWRG4 (28-pin soic پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MAX3243CDWRG4.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
MAX3243CDWRG4 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Serial Control Equipment, Data Acquisition and Instrumentation, Point-of-Sale Terminals, Embedded Service and Configuration Ports, Computer Peripherals, RS-232 Port Expanders.
Industrial Serial Control Equipment
MAX3243CDWRG4 is suitable for compact industrial controller and test equipment that still uses an RS-232 service or configuration port. Its three drivers and five receivers can support multiple RS-232 channels without requiring several separate interface packages, while the 3-to-5.5 V supply range allows use with 3.3 V and 5 V control electronics. The 250 kbps maximum data rate supports service consoles, configuration links, and moderate-speed command traffic. Place the transceiver near the connector, observe the datasheet decoupling requirements, and add external surge protection where cables leave the enclosure.
تجویز کردہ
Data Acquisition and Instrumentation
The three-driver and five-receiver arrangement in MAX3243CDWRG4 fits data-acquisition systems that need command transmission and responses from several instruments. The 250 kbps rate is appropriate for measurement-control traffic where deterministic serial communication matters more than very high bandwidth. Its ±15 kV HBM ESD rating adds protection at the IC level for instruments connected through accessible serial ports. Designers should still use a shielded cable, chassis grounding, and appropriately rated external protection, and should confirm that the UART baud rate and line signaling remain within the complete system specification.
تجویز کردہ
Point-of-Sale Terminals
MAX3243CDWRG4 can support the combination of peripheral communication and service diagnostics commonly found in point-of-sale terminals. Multiple transmitters and receivers provide flexible channel allocation for a printer, customer display, scanner, or service connector, while operation from 3.3 V or 5 V simplifies power architecture. The 250 kbps signaling rate is more than sufficient for many transactional peripherals. Keep RS-232 traces away from switching regulators and high-speed digital nets, and place input and output protection close to the external connector to limit transient exposure at the transceiver pins.
تجویز کردہ
Embedded Service and Configuration Ports
An embedded controller can use MAX3243CDWRG4 to preserve an RS-232 configuration interface while sharing logic rails with a 3.3 V processor or 5 V peripheral subsystem. The package combines three drivers and five receivers in one 28-pin SOIC, reducing the component count compared with separate single-channel transceivers. The 250 kbps limit supports firmware update, diagnostics, and configuration traffic. Verify input thresholds for the chosen logic voltage, provide clean supply decoupling, and use controlled connector grounding to avoid introducing ground offsets into the receiver reference.
تجویز کردہ
Computer Peripherals
MAX3243CDWRG4 is applicable to legacy-compatible computer peripherals and adapters that retain RS-232 ports alongside newer digital interfaces. Three drivers and five receivers allow several peripheral connections to share an interface IC, while the 250 kbps maximum rate covers printer, programming, and control traffic. Its 28-pin SOIC package is straightforward for conventional PCB assembly. Use the manufacturer pin description when assigning channels, maintain the recommended supply bypass network, and terminate unused outputs in accordance with the datasheet guidance to prevent unwanted signaling.
تجویز کردہ
RS-232 Port Expanders
MAX3243CDWRG4 can reduce the footprint of an RS-232 port expander by providing three drivers and five receivers in a single 28-pin SOIC. A system can allocate two driver-and-receiver pairs for bidirectional ports and retain additional receive channels for status or monitoring lines. The device's 250 kbps maximum rate is suitable for command and control channels rather than high-bandwidth data transfer. Validate that every unused driver output and receiver input is configured as required by the manufacturer datasheet, and use separate protection components for exposed external connectors.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MAX3243CDWRG4 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | MAX3243EIDWRG4 | MAX3243IPWR | MAX3243CDWR | MAX3243EIDWR | MAX3243CSE+ |
|---|---|---|---|---|---|---|
| Package | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
اہم امتیازی خصوصیات
- Three transmitters and five receivers in one interface package (بمقابلہMAX3243EIDWRG4)
- Supports both common 3.3 V and 5 V system rails (بمقابلہMAX3243IPWR)
- 250 kbps multichannel RS-232 performance (بمقابلہSP3243EHCA-L/TR)
- Commercial-temperature ordering code (بمقابلہMAX3243EIDWRG4)
ڈیزائن نوٹس
Place the MAX3243CDWRG4 close to the RS-232 connector and route each driver output and receiver input as a short, direct signal path. Keep these traces away from switching-regulator power paths, crystal nets, and high-speed digital routing. Connect the decoupling network specified by the manufacturer datasheet directly to the supply and ground pins, and use a continuous ground plane beneath the device where practical.
Do not assume that all MAX3243 ordering codes are drop-in equivalents merely because they use the same family name. Compare the ordering table, temperature grade, shutdown behavior, enable functions, ROUT2B output, and INVALID output before replacing MAX3243CDWRG4. Also verify that the logic-side voltage thresholds match the UART supply level, particularly in a mixed 3.3 V and 5 V system.
Integrated ±15 kV HBM protection does not remove the need for system-level transient protection on an exposed RS-232 connector. Place surge or TVS protection close to the connector entry, use a suitable cable shield and ground strategy, and avoid long unprotected stubs. This arrangement limits high-energy transients before they reach MAX3243CDWRG4 driver and receiver pins.
Follow the manufacturer's pin-description table when assigning every driver, receiver, supply, ground, and control connection in the 28-pin SOIC. Do not infer a pin function from the position of a similar transceiver family member. Confirm how unused driver outputs and receiver inputs should be handled so inactive channels do not create unnecessary signal activity or current draw.
تعمیل کی معلومات
Compliance details are not stated in the listed manufacturer or distributor records. Check the current Texas Instruments product page and the MAX3243 material-compliance documentation before finalizing a regulated design.