Texas Instruments

MAX3243CDWRG4 - 3/5 RS-232 Transceiver | Texas Instruments

部品番号: MAX3243CDWRG4 ✓ 生産中
3 V to 5.5 V Vdss 28-pin SOIC Package
MOQ: 1 |

MAX3243CDWRG4 概要

Texas Instruments MAX3243CDWRG4 is a 3-to-5.5 V multichannel RS-232 line driver and receiver with three drivers, five receivers, a maximum data rate of 250 kbps, and ±15 kV HBM ESD protection. The device is housed in a 28-pin SOIC surface-mount package and is designed for commercial-temperature operation from 0°C to 70°C. It provides a complete interface for translating between RS-232 line-level signals and CMOS/TTL logic-level signals.

An RS-232 transceiver is an interface IC used to connect equipment designed around the RS-232 standard to a digital system operating with lower logic voltages. The MAX3243 family combines multiple drivers and receivers in one package, reducing the number of separate interface components required for multiport serial equipment. Its 3-to-5.5 V supply range allows operation from common 3.3 V and 5 V system rails.

The three-driver and five-receiver arrangement is suitable for RS-232 connections that require more than one serial channel, including communications equipment, test systems, industrial controllers, and computer peripherals. The 250 kbps maximum signaling rate supports substantially faster data transfer than legacy serial-port equipment commonly designed for lower rates. Integrated ±15 kV human-body-model ESD protection improves system resilience when exposed connector pins encounter electrostatic discharge.

MAX3243CDWRG4 is identified as a full RS-232 transceiver with three drivers and five receivers. The manufacturer classifies it as a multichannel line driver/receiver, while the listed operating range allows operation with both 3 V and 5 V supply systems. Its 28-pin SOIC format supports conventional surface-mount assembly and is appropriate for designs where a single package must handle several RS-232 signal directions.

Typical uses include industrial serial-control equipment, instrumentation, data-acquisition systems, point-of-sale terminals, and embedded systems that retain an RS-232 interface. Because the device includes both drivers and receivers, it can support two fully independent RS-232 ports while also providing one additional receive channel and additional driver capacity when required by the system architecture.

For PCB implementation, place the device close to its RS-232 connector and route driver and receiver outputs as short, well-controlled signal paths. Decoupling capacitors should be connected to the supply and ground pins according to the manufacturer datasheet. The external connector and cable should also provide appropriate surge and ESD protection because the chip's internal HBM rating does not replace system-level connector protection.

This product record combines the manufacturer's electrical and packaging information with practical RS-232 design guidance. It also provides structured comparisons, replacement criteria, and application notes to help engineers evaluate integration, protection, channel count, and supply compatibility before assigning the MAX3243CDWRG4 to a PCB.

ドロップイン代替品: MAX3243CDWRG4 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MAX3243CDWRG4 (同一形状・フットプリント) — 相違点: Product Type, ESD Protection, Maximum Data Rate, Package, Supply Voltage Range.

Texas Instruments
Product Type: Multichannel RS-232 line driver and receiver
ESD Protection: ±15kV HBM
Maximum Data Rate: 250kbps
比較対象 MAX3243CDWRG4 →
Texas Instruments
Product Type: 3/5 RS-232 transceiver
Maximum Data Rate: 500 kbps
Package: 28-pin SOIC (DW)
比較対象 MAX3243CDWRG4 →
Texas Instruments
Product Type: Multichannel RS-232 line driver and receiver (3/5 transceiver)
ESD Protection: +/-15 kV (HBM) on serial pins
Package: 28-pin SOIC (DW), gull wing, surface mount
比較対象 MAX3243CDWRG4 →
Texas Instruments
ESD Protection: ±15 kV
比較対象 MAX3243CDWRG4 →

MAX3243EIDWRG4

✅ ドロップイン
Texas Instruments
📦 28-SOIC
Multichannel RS-232 line driver and receiver (3/5 transceiver) · 3 V to 5.5 V · 250 kbps · 3 · 5 · +/-15 kV (HBM) on serial pins · TIA/EIA-232-F · 28-pin SOIC (DW), gull wing, surface mount

価格はお問い合わせください

データシートを見る →

MAX3243IPWRDL

✅ ドロップイン
Texas Instruments
📦 28-SOIC
Multichannel RS-232 line driver/receiver · 3 V to 5.5 V · 250 kbps · ±15 kV · RS-232 · 28-pin TSSOP · Surface mount

価格はお問い合わせください

データシートを見る →

MAX3243CDWR

✅ ドロップイン
Texas Instruments
📦 28-SOIC
Multichannel RS-232 line driver and receiver · 3V to 5.5V · 250kbps · 3 channels · 5 channels · ±15kV HBM · 28-pin SOIC · Surface mount

価格はお問い合わせください

データシートを見る →

MAX3243EIDWR

✅ ドロップイン ⚠️ 仕様未検証
Texas Instruments
📦 28-SOIC
3/5 RS-232 transceiver · 3 V to 5.5 V · 500 kbps · 3 · 5 · ±15 kV HBM and IEC 61000-4-2 air-gap discharge · ±8 kV IEC 61000-4-2 contact discharge · -40 °C to +85 °C

価格はお問い合わせください

データシートを見る →

MAX3243CSE+

✅ ドロップイン ⚠️ 仕様未検証
📦 28-SOIC
Same-family 3/5 RS-232 implementation in 28-pin SOIC; listed 3-to-5.5 V supply, 250 kbps rate, and ±15 kV HBM rating differ by 0

📋 参考代替品(カタログ未掲載)

MAX3243CDWRG4 仕様

Product Type Multichannel RS-232 line driver/receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
Number of Drivers 3
Number of Receivers 5
ESD Protection ±15 kV HBM
パッケージ 28-pin SOIC
実装タイプ Surface mount
動作温度範囲 0°C to 70°C
Transceiver Configuration 3/5 full RS-232 transceiver

MAX3243CDWRG4 28-pin soic ピン配置ガイド

MAX3243CDWRG4 (28-pin soic パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

MAX3243CDWRG4 の 28-pin soic パッケージピン配置図

詳細なピン配置データはありません: MAX3243CDWRG4.

詳細は データシート をご参照ください。

主な用途

MAX3243CDWRG4 の用途: 6 件s: Industrial Serial Control Equipment, Data Acquisition and Instrumentation, Point-of-Sale Terminals, Embedded Service and Configuration Ports, Computer Peripherals, RS-232 Port Expanders.

🏭

Industrial Serial Control Equipment

MAX3243CDWRG4 is suitable for compact industrial controller and test equipment that still uses an RS-232 service or configuration port. Its three drivers and five receivers can support multiple RS-232 channels without requiring several separate interface packages, while the 3-to-5.5 V supply range allows use with 3.3 V and 5 V control electronics. The 250 kbps maximum data rate supports service consoles, configuration links, and moderate-speed command traffic. Place the transceiver near the connector, observe the datasheet decoupling requirements, and add external surge protection where cables leave the enclosure.

📟

Data Acquisition and Instrumentation

The three-driver and five-receiver arrangement in MAX3243CDWRG4 fits data-acquisition systems that need command transmission and responses from several instruments. The 250 kbps rate is appropriate for measurement-control traffic where deterministic serial communication matters more than very high bandwidth. Its ±15 kV HBM ESD rating adds protection at the IC level for instruments connected through accessible serial ports. Designers should still use a shielded cable, chassis grounding, and appropriately rated external protection, and should confirm that the UART baud rate and line signaling remain within the complete system specification.

🖥️

Point-of-Sale Terminals

MAX3243CDWRG4 can support the combination of peripheral communication and service diagnostics commonly found in point-of-sale terminals. Multiple transmitters and receivers provide flexible channel allocation for a printer, customer display, scanner, or service connector, while operation from 3.3 V or 5 V simplifies power architecture. The 250 kbps signaling rate is more than sufficient for many transactional peripherals. Keep RS-232 traces away from switching regulators and high-speed digital nets, and place input and output protection close to the external connector to limit transient exposure at the transceiver pins.

🔧

Embedded Service and Configuration Ports

An embedded controller can use MAX3243CDWRG4 to preserve an RS-232 configuration interface while sharing logic rails with a 3.3 V processor or 5 V peripheral subsystem. The package combines three drivers and five receivers in one 28-pin SOIC, reducing the component count compared with separate single-channel transceivers. The 250 kbps limit supports firmware update, diagnostics, and configuration traffic. Verify input thresholds for the chosen logic voltage, provide clean supply decoupling, and use controlled connector grounding to avoid introducing ground offsets into the receiver reference.

🖨️

Computer Peripherals

MAX3243CDWRG4 is applicable to legacy-compatible computer peripherals and adapters that retain RS-232 ports alongside newer digital interfaces. Three drivers and five receivers allow several peripheral connections to share an interface IC, while the 250 kbps maximum rate covers printer, programming, and control traffic. Its 28-pin SOIC package is straightforward for conventional PCB assembly. Use the manufacturer pin description when assigning channels, maintain the recommended supply bypass network, and terminate unused outputs in accordance with the datasheet guidance to prevent unwanted signaling.

🔌

RS-232 Port Expanders

MAX3243CDWRG4 can reduce the footprint of an RS-232 port expander by providing three drivers and five receivers in a single 28-pin SOIC. A system can allocate two driver-and-receiver pairs for bidirectional ports and retain additional receive channels for status or monitoring lines. The device's 250 kbps maximum rate is suitable for command and control channels rather than high-bandwidth data transfer. Validate that every unused driver output and receiver input is configured as required by the manufacturer datasheet, and use separate protection components for exposed external connectors.

おすすめ製品の概要

MAX3243EIDWRG4 Texas Instruments 使用用途: Industrial Serial Control Equipment, Embedded Service and Configuration Ports, RS-232 Port Expanders MAX3243IPWR Same-family multichannel RS-232 interface 使用用途: Industrial Serial Control Equipment, Point-of-Sale Terminals, Computer Peripherals MAX3243CDWR Texas Instruments 使用用途: Data Acquisition and Instrumentation, Embedded Service and Configuration Ports MAX3243EIDWR Texas Instruments 使用用途: Data Acquisition and Instrumentation, RS-232 Port Expanders MAX3243CSE+ Same-family commercial-temperature RS-232 alternative 使用用途: Point-of-Sale Terminals, Computer Peripherals
What is the MAX3243CDWRG4?
The MAX3243CDWRG4 is a 3-to-5.5 V multichannel RS-232 transceiver from Texas Instruments. It combines three line drivers and five line receivers in a 28-pin SOIC package, supports data rates up to 250 kbps, and includes ±15 kV HBM ESD protection. According to the manufacturer product page, it is designed to translate between RS-232 line-level signals and logic-level signals used by digital equipment.
What are the key specifications of MAX3243CDWRG4?
The MAX3243CDWRG4 operates from 3 V to 5.5 V, provides three RS-232 drivers and five receivers, and supports a maximum data rate of 250 kbps. The device also provides ±15 kV HBM ESD protection and comes in a 28-pin SOIC package. According to the Texas Instruments product page and the distributor technical listing, these characteristics define it as a full 3/5 multichannel RS-232 transceiver.
Where can I download the MAX3243CDWRG4 datasheet PDF?
The MAX3243CDWRG4 datasheet and ordering information are available through the Texas Instruments MAX3243 product page at https://www.ti.com/product/MAX3243. That manufacturer page is the preferred source for the electrical characteristics, pin description, typical application circuit, and package drawings. An additional PDF-access page for this exact ordering code is listed in the MAX3243CDWRG4 datasheet search results.
Where is the MAX3243CDWRG4 pinout located?
The MAX3243CDWRG4 pinout is shown in the pin-description and package-drawing sections of the Texas Instruments MAX3243 datasheet. The device uses a 28-pin SOIC package, so assign PCB nets by the numbered diagram rather than by visual placement alone. Use the manufacturer pin-description table when connecting driver outputs, receiver inputs, supply pins, ground pins, and any shutdown or enable functions.
What is the maximum data rate of MAX3243CDWRG4?
The MAX3243CDWRG4 supports a maximum RS-232 data rate of 250 kbps. According to the Texas Instruments product page, this rate applies to the multichannel 3-to-5.5 V RS-232 line driver and receiver. The signal rate is important when matching the transceiver to a UART, industrial controller, or test instrument, particularly when cable length and system timing limit achievable throughput.
What ESD protection does MAX3243CDWRG4 provide?
The MAX3243CDWRG4 provides ±15 kV ESD protection using the human-body-model rating. According to the Texas Instruments MAX3243 product page, the protection is associated with the device's multichannel RS-232 interface. This rating supports robust connector-side design, but it does not eliminate the need for external surge protection or a properly designed cable and enclosure.
Can MAX3243CDWRG4 operate from a 3.3 V system?
Yes, the MAX3243CDWRG4 can operate within its documented 3-to-5.5 V supply range, which includes a 3.3 V rail. The manufacturer lists the device as a 3-to-5.5 V multichannel RS-232 transceiver. Confirm the logic-side input and output levels in the manufacturer datasheet for the exact design, especially when the UART and interface circuitry operate from a different supply than the transceiver.
What can replace the MAX3243CDWRG4?
A valid replacement must use the same 28-pin SOIC footprint, preserve the three-driver and five-receiver arrangement, operate across 3-to-5.5 V, and provide compatible serial-interface functions. Texas Instruments family members such as MAX3243EIDWRG4 and MAX3243IPWR are the closest candidates, while MAX3243CSE+ and MAX3243EIDWR require final pin-function verification. Treat temperature grade, enable behavior, and shutdown features as critical checks.
Is MAX3243EIDWRG4 pin-compatible with MAX3243CDWRG4?
MAX3243EIDWRG4 is a same-family candidate for a drop-in review because it retains the MAX3243 function and 28-pin SOIC format. The two ordering codes differ in their qualification and temperature designation, so they should not be treated as automatically interchangeable without comparing the datasheet ordering tables, enable or shutdown behavior, and production temperature range. The cross-reference results explicitly identify MAX3243EIDWRG4 as a related candidate.
What is the best MaxLinear equivalent for MAX3243CDWRG4?
The MaxLinear SP3243EHCA-L/TR is identified by MaxLinear as a functional equivalent and pin-compatible alternative to the Texas Instruments MAX3243CDWRG4. Its listed data rate is 460 kbps, which is higher than the MAX3243CDWRG4's 250 kbps rating. Before using it as a drop-in replacement, verify that its package has the same 28-pin SOIC footprint and that every power, driver, receiver, and control connection matches.
When should I choose MAX3243CDWRG4 over a lower-channel RS-232 transceiver?
Choose MAX3243CDWRG4 when the design needs multiple RS-232 directions in one package. Three drivers and five receivers can support two bidirectional ports plus additional receive capability without requiring separate transceiver ICs. A lower-channel device may be preferable when the board has only one simple TX or RX path and board area, channel count, and power consumption are the dominant concerns.
Is MAX3243CDWRG4 suitable for an industrial control system?
MAX3243CDWRG4 is suitable for RS-232 connections in commercial-temperature equipment, including industrial controllers that operate within the documented 0°C to 70°C range. Its 3-to-5.5 V supply, 250 kbps rate, and integrated ESD protection support compact communications interfaces. For wider temperature ranges or stricter environmental qualification, select an ordering variant whose datasheet explicitly covers those requirements.
Where can I buy MAX3243CDWRG4 online?
Use the Request a Quote form on this page to request MAX3243CDWRG4 pricing, availability, lead time, and order handling from XAIPART. The form is the appropriate route for a quote-first purchase and avoids static price or stock claims that can change without notice. Provide the required quantity, reel or tube preference, and destination country when submitting the request.
What is the price of MAX3243CDWRG4?
The current MAX3243CDWRG4 price is handled through the Request a Quote form on this page. Submit the required quantity and packaging preference to receive a current quotation and any applicable volume schedule. The part is offered on a quote-and-order basis, so no fixed unit price should be assumed from cached marketplace pages or historical distributor records.
What is the lead time and stock status for MAX3243CDWRG4?
Current MAX3243CDWRG4 lead time, stock status, and minimum order quantity should be requested through the Request a Quote form on this page. Include your required quantity, delivery date, and shipment destination so the order can be evaluated against current component availability. This avoids treating a distributor search page or a historical inventory message as a guaranteed allocation.

エンジニアリング参考データ: MAX3243CDWRG4 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose MAX3243CDWRG4 when the design needs a compact 3-to-5.5 V RS-232 interface with three drivers, five receivers, a 250 kbps maximum data rate, and ±15 kV HBM ESD protection. It is particularly appropriate for commercial-temperature systems that need several serial channels in one 28-pin SOIC. MAX3243EIDWRG4 and MAX3243IPWR are same-family candidates worth reviewing when temperature grade or control-output behavior differs, but their ordering tables must be checked before substitution. MAX3243CDWR, MAX3243EIDWR, and MAX3243CSE+ belong to the same family and should also be screened for temperature, enable, shutdown, and packaging-code differences. The MaxLinear SP3243EHCA-L/TR is a functional and pin-compatible cross-reference with a stated 460 kbps rate, but its package and exact pin functions must be confirmed before it can be treated as a physical drop-in replacement.

代替品との比較

パラメータ この製品 MAX3243EIDWRG4 MAX3243IPWR MAX3243CDWR MAX3243EIDWR MAX3243CSE+
Package 28-SOIC 28-SOIC 28-SOIC 28-SOIC 28-SOIC 28-SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments

主な差別化要因

  • Three transmitters and five receivers in one interface package (vs MAX3243EIDWRG4)
  • Supports both common 3.3 V and 5 V system rails (vs MAX3243IPWR)
  • 250 kbps multichannel RS-232 performance (vs SP3243EHCA-L/TR)
  • Commercial-temperature ordering code (vs MAX3243EIDWRG4)

設計ノート

Place the MAX3243CDWRG4 close to the RS-232 connector and route each driver output and receiver input as a short, direct signal path. Keep these traces away from switching-regulator power paths, crystal nets, and high-speed digital routing. Connect the decoupling network specified by the manufacturer datasheet directly to the supply and ground pins, and use a continuous ground plane beneath the device where practical.

Do not assume that all MAX3243 ordering codes are drop-in equivalents merely because they use the same family name. Compare the ordering table, temperature grade, shutdown behavior, enable functions, ROUT2B output, and INVALID output before replacing MAX3243CDWRG4. Also verify that the logic-side voltage thresholds match the UART supply level, particularly in a mixed 3.3 V and 5 V system.

Integrated ±15 kV HBM protection does not remove the need for system-level transient protection on an exposed RS-232 connector. Place surge or TVS protection close to the connector entry, use a suitable cable shield and ground strategy, and avoid long unprotected stubs. This arrangement limits high-energy transients before they reach MAX3243CDWRG4 driver and receiver pins.

Follow the manufacturer's pin-description table when assigning every driver, receiver, supply, ground, and control connection in the 28-pin SOIC. Do not infer a pin function from the position of a similar transceiver family member. Confirm how unused driver outputs and receiver inputs should be handled so inactive channels do not create unnecessary signal activity or current draw.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Compliance details are not stated in the listed manufacturer or distributor records. Check the current Texas Instruments product page and the MAX3243 material-compliance documentation before finalizing a regulated design.

データ検証日: 2026-11-09 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MAX3243CDWRG4 datasheet MAX3243CDWRG4 datasheet pdf MAX3243CDWRG4 pinout MAX3243CDWRG4 specifications Texas Instruments MAX3243CDWRG4 MAX3243CDWRG4 28-SOIC MAX3243CDWRG4 250 kbps MAX3243CDWRG4 RS-232 transceiver MAX3243CDWRG4 drop-in replacement MAX3243CDWRG4 equivalent MAX3243CDWRG4 vs MAX3243EIDWRG4 MAX3243CDWRG4 price MAX3243CDWRG4 stock MAX3243CDWRG4 ESD protection MAX3243CDWRG4 industrial control

関連部品&用語

Texas Instruments MAX3243CDWRG4 MAX3243 MAX3243EIDWRG4 MAX3243IPWR MAX3243CDWR MAX3243EIDWR MAX3243CSE+ SP3243EHCA-L/TR MaxLinear RS-232 transceiver RS-232 line driver RS-232 line receiver multichannel interface IC CMOS/TTL logic interface 3.3 V power supply 5 V power supply 250 kbps data rate ±15 kV HBM ESD protection 28-pin SOIC SOIC package family surface-mount technology industrial control equipment data acquisition point-of-sale terminal
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示