MAX3243CWI+T - 3/5 RS-232 Transceiver, 250 kbps | Analog Devices
MPN: MAX3243CWI+T ✓ فعالMAX3243CWI+T جائزہ
An RS-232 transceiver is an interface IC that converts between single-ended RS-232 line levels and complementary TTL or CMOS logic levels. Within the broader signal-chain hierarchy, the MAX3243 belongs to the RS-232 transceiver class, then to line-driver and receiver ICs, interface ICs, and ultimately semiconductor devices. Its integrated drivers, receivers, charge-pump supply, and logic-side functions simplify asynchronous serial-interface implementation.
The principal operating parameters are a 3 V to 5.5 V supply range, a maximum data rate of 250 kbps, three transmit channels, five receive channels, and ±15 kV ESD protection. AutoShutdown is particularly useful in battery-powered and intermittently connected equipment because the internal supply and drivers stop operating when the receiver inputs do not detect a valid signal level. The commercial-temperature ordering code and 28-pin wide SOIC package support conventional surface-mount assembly.
The MAX3243 architecture combines charge-pump-assisted RS-232 level generation with digital receiver thresholding and TTL-compatible control inputs. The always-active receiver permits monitoring of a remote connection even while the principal transceiver supply is shut down. This combination is useful in communications, instrumentation, industrial control, and service equipment where several RS-232 ports share a compact board area.
Typical uses include multiport RS-232 port expansion, configuration interfaces for industrial equipment, service-console links, data-acquisition systems, and legacy peripheral connectivity. A 250 kbps data rate supports moderate-speed control traffic, while three drivers and five receivers cover asymmetric port requirements such as one PC connecting to several instruments or peripherals.
PCB design should provide the charge-pump capacitors and supply capacitors close to their designated pins, keep RS-232 traces away from sensitive analog signals, and route the three driver outputs directly toward their connector or protection network. The wide SOIC footprint requires adequate lead spacing and solderability suitable for the component body size and terminal pitch.
This product overview combines the manufacturer's electrical characteristics with package, interface, application, layout, and sourcing guidance. It also distinguishes true same-package drop-in alternatives from devices with different footprints, helping engineers evaluate replacements before committing a new PCB revision.
کے لیے ڈراپ اِن متبادل MAX3243CWI+T — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
MAX3243EWI+
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MAX3243CWI+T تفصیلات
| Product Type | 3-driver, 5-receiver RS-232 transceiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| Number of Transmit Drivers | 3 channels |
| Number of Receive Channels | 5 channels |
| Always-Active Receiver | 1 complementary receiver channel |
| ESD Protection | ±15 kV |
| AutoShutdown Supply Current | 1 µA |
| پیکیج | 28-pin wide SOIC |
| Terminal Count | 28 terminals |
| ماؤنٹنگ ٹائپ | Surface mount |
| Package Shape | Rectangular |
| Lead Form | Gull wing |
| Temperature Grade | Commercial |
MAX3243CWI+T پن کنفیگریشن
| پن 1 | R1OUT — Receiver 1 output |
| پن 2 | R2OUT — Receiver 2 output |
| پن 3 | R3OUT — Receiver 3 output |
| پن 4 | R4OUT — Receiver 4 output |
| پن 5 | R5OUT — Receiver 5 output |
| پن 6 | R3IN — Receiver 3 input |
| پن 7 | R2IN — Receiver 2 input |
| پن 8 | R1IN — Receiver 1 input |
| پن 9 | R4IN — Receiver 4 input |
| پن 10 | GND — Ground |
| پن 11 | R5IN — Receiver 5 input |
| پن 12 | T1IN — Transmitter 1 input |
| پن 13 | T2IN — Transmitter 2 input |
| پن 14 | T3IN — Transmitter 3 input |
| پن 15 | T3OUT — Transmitter 3 output |
| پن 16 | T2OUT — Transmitter 2 output |
| پن 17 | T1OUT — Transmitter 1 output |
| پن 18 | DTR — Data terminal ready input |
| پن 19 | RTS — Request to send input |
| پن 20 | DSR — Data set ready output |
| پن 21 | CTS — Clear to send output |
| پن 22 | VCC — Positive supply voltage |
| پن 23 | V- — Negative charge-pump output |
| پن 24 | V+ — Positive charge-pump output |
| پن 25 | C2+ — Charge-pump capacitor 2 positive terminal |
| پن 26 | C2- — Charge-pump capacitor 2 negative terminal |
| پن 27 | C1+ — Charge-pump capacitor 1 positive terminal |
| پن 28 | C1- — Charge-pump capacitor 1 negative terminal |
عام استعمالات
MAX3243CWI+T کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Controller Port Expansion, Test and Measurement Console, Data Acquisition Equipment, Service and Diagnostic Interfaces, Legacy Peripheral Connectivity, Battery-Powered Field Module.
Industrial Controller Port Expansion
The MAX3243CWI+T fits industrial controller designs that need several RS-232 links without adding a separate transceiver for every port. Three drivers and five receivers provide asymmetric channel capacity, while 3 V to 5.5 V operation allows use with common 3.3 V or 5 V control electronics. The 250 kbps rate is appropriate for configuration, status, and supervisory traffic rather than continuous bulk transfer. AutoShutdown can reduce standby consumption when connected equipment does not assert a valid signal, but the controller must allow sufficient startup time before exchanging commands.
تجویز کردہ
Test and Measurement Console
The MAX3243CWI+T is useful in a multi-instrument measurement console that must connect a computer or controller to several RS-232 devices. Three driver channels support outbound commands, and five receiver channels accommodate status or measurement returns. Its 250 kbps maximum rate is suitable for many legacy test equipment protocols, while ±15 kV ESD protection adds interface robustness. The always-active receiver can support cable monitoring, and AutoShutdown helps control consumption when instruments are disconnected. Logic levels and RS-232 signals should be verified against each instrument before commissioning.
تجویز کردہ
Data Acquisition Equipment
The MAX3243CWI+T can serve as the serial interface in data-acquisition units that collect readings from multiple external sensors or laboratory instruments. The 3-driver, 5-receiver arrangement accommodates a mixture of commands and returned measurements, and the 250 kbps rate is adequate for many low-bandwidth acquisition protocols. Operating from 3 V to 5.5 V makes the device adaptable to embedded acquisition systems with either 3.3 V or 5 V logic rails. The always-active receiver permits remote-link monitoring, while AutoShutdown reduces consumption during inactive acquisition periods.
تجویز کردہ
Service and Diagnostic Interfaces
The MAX3243CWI+T fits service equipment that must communicate with and monitor multiple installed systems through legacy RS-232 ports. Three transmit drivers can send service commands to separate units, while five receiver channels support diagnostic responses and remote monitoring. The always-active complementary receiver is particularly relevant to service equipment that must detect a connected target even when the main driver supply is inactive. Its 250 kbps limit and ±15 kV ESD protection suit many diagnostic protocols, although cable protection, grounding, and device-specific logic levels must be checked for each target system.
تجویز کردہ
Legacy Peripheral Connectivity
The MAX3243CWI+T can connect modern control logic to legacy RS-232 printers, scanners, programmers, and peripheral adapters. Its 250 kbps data rate covers many legacy serial protocols, while the three-driver, five-receiver configuration allows several peripherals to share one transceiver when channel assignments permit. The wide SOIC package is easy to route on conventional through-hole-compatible boards, although the exact footprint must still match. For installations with long cables or severe electrical noise, add appropriate connector-side surge protection and verify that the device remains active for the peripheral's handshake signaling.
تجویز کردہ
Battery-Powered Field Module
The MAX3243CWI+T can fit battery-powered field modules that communicate intermittently through an RS-232 service port. Its AutoShutdown function reduces supply current to 1 µA when the receiver inputs do not detect a valid signal, helping preserve energy between service sessions. The complementary always-active receiver can monitor whether a service cable is connected while the main drivers remain inactive. Operation from 3 V to 5.5 V supports common battery-regulated system rails, while ±15 kV ESD protection improves robustness. Firmware must include the required wake-up interval before the first command is transmitted.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MAX3243CWI+T — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | MAX3243EWI+ |
|---|---|---|
| Package | 28-pin wide SOIC | 28-pin wide SOIC - same |
| Brand | Analog Devices | Analog Devices |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps |
| Transmit Drivers | 3 channels | 3 channels |
| Receive Channels | 5 channels including complementary always-active receiver | 5 channels including complementary always-active receiver |
| ESD Protection | ±15 kV | ±15 kV |
| AutoShutdown Supply Current | 1 µA | 1 µA |
| Temperature Grade | Commercial | Extended-temperature ordering option |
| Special Features | AutoShutdown and complementary always-active receiver | AutoShutdown and complementary always-active receiver |
اہم امتیازی خصوصیات
- Higher RS-232 channel count than two-channel transceivers (بمقابلہMAX3232ECDR)
- True 3 V to 5.5 V operation (بمقابلہMAX232EIDR)
- Multichannel always-active monitoring (بمقابلہMAX3232ECDR)
ڈیزائن نوٹس
Place the charge-pump capacitors and supply-decoupling capacitors directly beside the associated MAX3243CWI+T pins, with short, symmetrical return paths. Keep the V+ and V- charge-pump routing away from receiver inputs and sensitive logic traces. The MAX3243 uses a 28-pin wide SOIC footprint, so confirm body width, lead pitch, and solder-pad dimensions against the package drawing before releasing artwork rather than treating every 28-pin SOIC footprint as interchangeable.
Route each RS-232 driver output toward its connector or protection component with a continuous ground reference and avoid sharing narrow stubs between ports. The MAX3243 supports rates up to 250 kbps, but long cables, connector transitions, and adjacent switching circuitry can still degrade the signal. Keep the three transmit channels physically separated from the five receive inputs where possible, and follow the manufacturer datasheet's recommended grounding and interface layout to reduce noise coupling.
Do not substitute MAX3243 packages solely because they all contain 28 pins. MAX3243CPW and MAX3243ECPW use TSSOP packages and cannot replace MAX3243CWI+T on the same PCB. Before using MAX3243EWI+, verify the operating-temperature range, production status, and complete pin functions in the manufacturer ordering documentation. Also allow the AutoShutdown circuit to wake before transmitting because the internal drivers and charge-pump supply remain inactive while no valid receiver signal is detected.
تعمیل کی معلومات
The verified product information does not explicitly state the RoHS, REACH, lead-free, halogen-free, or conflict-minerals status of the exact MAX3243CWI+T ordering code. The MAX3243 is a commercial-temperature interface IC, so AEC-Q100 qualification is not indicated.