Analog Devices

MAX3243CWI+T - 3/5 RS-232 Transceiver, 250 kbps | Analog Devices

MPN: MAX3243CWI+T ✓ פעיל
3 V to 5.5 V Vdss 1 µA Id 28-pin wide SOIC Package
כמות הזמנה מינימלית: 1 |

MAX3243CWI+T סקירה

Analog Devices MAX3243CWI+T is a 3-driver, 5-receiver RS-232 transceiver operating from 3 V to 5.5 V at up to 250 kbps, with ±15 kV ESD protection, in a 28-pin wide SOIC package. The MAX3243 family also provides a complementary always-active receiver for external monitoring and an AutoShutdown supply circuit that can reduce supply current to 1 µA when no valid receiver signal is detected.

An RS-232 transceiver is an interface IC that converts between single-ended RS-232 line levels and complementary TTL or CMOS logic levels. Within the broader signal-chain hierarchy, the MAX3243 belongs to the RS-232 transceiver class, then to line-driver and receiver ICs, interface ICs, and ultimately semiconductor devices. Its integrated drivers, receivers, charge-pump supply, and logic-side functions simplify asynchronous serial-interface implementation.

The principal operating parameters are a 3 V to 5.5 V supply range, a maximum data rate of 250 kbps, three transmit channels, five receive channels, and ±15 kV ESD protection. AutoShutdown is particularly useful in battery-powered and intermittently connected equipment because the internal supply and drivers stop operating when the receiver inputs do not detect a valid signal level. The commercial-temperature ordering code and 28-pin wide SOIC package support conventional surface-mount assembly.

The MAX3243 architecture combines charge-pump-assisted RS-232 level generation with digital receiver thresholding and TTL-compatible control inputs. The always-active receiver permits monitoring of a remote connection even while the principal transceiver supply is shut down. This combination is useful in communications, instrumentation, industrial control, and service equipment where several RS-232 ports share a compact board area.

Typical uses include multiport RS-232 port expansion, configuration interfaces for industrial equipment, service-console links, data-acquisition systems, and legacy peripheral connectivity. A 250 kbps data rate supports moderate-speed control traffic, while three drivers and five receivers cover asymmetric port requirements such as one PC connecting to several instruments or peripherals.

PCB design should provide the charge-pump capacitors and supply capacitors close to their designated pins, keep RS-232 traces away from sensitive analog signals, and route the three driver outputs directly toward their connector or protection network. The wide SOIC footprint requires adequate lead spacing and solderability suitable for the component body size and terminal pitch.

This product overview combines the manufacturer's electrical characteristics with package, interface, application, layout, and sourcing guidance. It also distinguishes true same-package drop-in alternatives from devices with different footprints, helping engineers evaluate replacements before committing a new PCB revision.

חלופות תחליף ישיר עבור MAX3243CWI+T — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

MAX3243EWI+

✅ Drop-In
Analog Devices
📦 28-pin wide SOIC
RS-232 transceiver · +3.0V to +5.5V · 250kbps · 3 · 5 · EIA/TIA-232 and V.28/V.24 · 1uA shutdown current · ±15kV

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX3243CWI+T מפרטים

Product Type 3-driver, 5-receiver RS-232 transceiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
Number of Transmit Drivers 3 channels
Number of Receive Channels 5 channels
Always-Active Receiver 1 complementary receiver channel
ESD Protection ±15 kV
AutoShutdown Supply Current 1 µA
מארז 28-pin wide SOIC
Terminal Count 28 terminals
סוג הרכבה Surface mount
Package Shape Rectangular
Lead Form Gull wing
Temperature Grade Commercial

תצורת פינים של MAX3243CWI+T

SOIC-28 Package Pinout Diagram SOIC-28W 28-pin, 7.5x17.9mm, P1.27mm, JEDEC MS-013. 1 28 2 27 3 26 4 25 5 24 6 23 7 22 8 21 9 20 10 19 11 18 12 17 13 16 14 15 SOIC-28
פין 1 R1OUT — Receiver 1 output
פין 2 R2OUT — Receiver 2 output
פין 3 R3OUT — Receiver 3 output
פין 4 R4OUT — Receiver 4 output
פין 5 R5OUT — Receiver 5 output
פין 6 R3IN — Receiver 3 input
פין 7 R2IN — Receiver 2 input
פין 8 R1IN — Receiver 1 input
פין 9 R4IN — Receiver 4 input
פין 10 GND — Ground
פין 11 R5IN — Receiver 5 input
פין 12 T1IN — Transmitter 1 input
פין 13 T2IN — Transmitter 2 input
פין 14 T3IN — Transmitter 3 input
פין 15 T3OUT — Transmitter 3 output
פין 16 T2OUT — Transmitter 2 output
פין 17 T1OUT — Transmitter 1 output
פין 18 DTR — Data terminal ready input
פין 19 RTS — Request to send input
פין 20 DSR — Data set ready output
פין 21 CTS — Clear to send output
פין 22 VCC — Positive supply voltage
פין 23 V- — Negative charge-pump output
פין 24 V+ — Positive charge-pump output
פין 25 C2+ — Charge-pump capacitor 2 positive terminal
פין 26 C2- — Charge-pump capacitor 2 negative terminal
פין 27 C1+ — Charge-pump capacitor 1 positive terminal
פין 28 C1- — Charge-pump capacitor 1 negative terminal

יישומים טיפוסיים

MAX3243CWI+T מתאים עבור 6 יישוםs: Industrial Controller Port Expansion, Test and Measurement Console, Data Acquisition Equipment, Service and Diagnostic Interfaces, Legacy Peripheral Connectivity, Battery-Powered Field Module.

🏭

Industrial Controller Port Expansion

The MAX3243CWI+T fits industrial controller designs that need several RS-232 links without adding a separate transceiver for every port. Three drivers and five receivers provide asymmetric channel capacity, while 3 V to 5.5 V operation allows use with common 3.3 V or 5 V control electronics. The 250 kbps rate is appropriate for configuration, status, and supervisory traffic rather than continuous bulk transfer. AutoShutdown can reduce standby consumption when connected equipment does not assert a valid signal, but the controller must allow sufficient startup time before exchanging commands.

🔧

Test and Measurement Console

The MAX3243CWI+T is useful in a multi-instrument measurement console that must connect a computer or controller to several RS-232 devices. Three driver channels support outbound commands, and five receiver channels accommodate status or measurement returns. Its 250 kbps maximum rate is suitable for many legacy test equipment protocols, while ±15 kV ESD protection adds interface robustness. The always-active receiver can support cable monitoring, and AutoShutdown helps control consumption when instruments are disconnected. Logic levels and RS-232 signals should be verified against each instrument before commissioning.

🖥️

Data Acquisition Equipment

The MAX3243CWI+T can serve as the serial interface in data-acquisition units that collect readings from multiple external sensors or laboratory instruments. The 3-driver, 5-receiver arrangement accommodates a mixture of commands and returned measurements, and the 250 kbps rate is adequate for many low-bandwidth acquisition protocols. Operating from 3 V to 5.5 V makes the device adaptable to embedded acquisition systems with either 3.3 V or 5 V logic rails. The always-active receiver permits remote-link monitoring, while AutoShutdown reduces consumption during inactive acquisition periods.

🔧

Service and Diagnostic Interfaces

The MAX3243CWI+T fits service equipment that must communicate with and monitor multiple installed systems through legacy RS-232 ports. Three transmit drivers can send service commands to separate units, while five receiver channels support diagnostic responses and remote monitoring. The always-active complementary receiver is particularly relevant to service equipment that must detect a connected target even when the main driver supply is inactive. Its 250 kbps limit and ±15 kV ESD protection suit many diagnostic protocols, although cable protection, grounding, and device-specific logic levels must be checked for each target system.

🖨️

Legacy Peripheral Connectivity

The MAX3243CWI+T can connect modern control logic to legacy RS-232 printers, scanners, programmers, and peripheral adapters. Its 250 kbps data rate covers many legacy serial protocols, while the three-driver, five-receiver configuration allows several peripherals to share one transceiver when channel assignments permit. The wide SOIC package is easy to route on conventional through-hole-compatible boards, although the exact footprint must still match. For installations with long cables or severe electrical noise, add appropriate connector-side surge protection and verify that the device remains active for the peripheral's handshake signaling.

⚡

Battery-Powered Field Module

The MAX3243CWI+T can fit battery-powered field modules that communicate intermittently through an RS-232 service port. Its AutoShutdown function reduces supply current to 1 µA when the receiver inputs do not detect a valid signal, helping preserve energy between service sessions. The complementary always-active receiver can monitor whether a service cable is connected while the main drivers remain inactive. Operation from 3 V to 5.5 V supports common battery-regulated system rails, while ±15 kV ESD protection improves robustness. Firmware must include the required wake-up interval before the first command is transmitted.

What is the operating voltage range of MAX3243CWI+T?
The MAX3243CWI+T operates from 3 V to 5.5 V, allowing operation from both 3.3 V and 5 V systems. According to the Analog Devices MAX3243 manufacturer datasheet, the family is designed for true +3 V to +5.5 V operation rather than requiring a regulated 5 V input. The device combines three RS-232 drivers, five receivers, and an always-active complementary receiver in a 28-pin wide SOIC package. Its 1 µA AutoShutdown supply current helps reduce consumption when no valid receiver signal is present.
What are the key specifications of MAX3243CWI+T that engineers should know?
The MAX3243CWI+T is a 3 V to 5.5 V RS-232 transceiver rated for data rates up to 250 kbps, with three transmit drivers, five receive channels, and ±15 kV ESD protection. The manufacturer datasheet also identifies a complementary always-active receiver for monitoring purposes and AutoShutdown operation with 1 µA supply current. The ordering code denotes a commercial-temperature device in a 28-pin wide SOIC package. These parameters make it suitable for multiport asynchronous serial interfaces, industrial control links, and legacy equipment connectivity.
How many RS-232 drivers and receivers does MAX3243CWI+T contain?
The MAX3243CWI+T contains three RS-232 transmit drivers and five receive channels. Analog Devices describes the fifth receiver as a complementary always-active receiver intended for external monitoring, allowing a connection to remain observable while the main transceiver supply and drivers are shut down. The device is therefore suited to systems with asymmetric communication requirements, such as one controller monitoring several instruments or peripherals. Its channel count and 28-pin wide SOIC footprint should be checked against the connector signal assignment during PCB design.
What is the maximum data rate of MAX3243CWI+T?
The MAX3243CWI+T supports RS-232 data rates up to 250 kbps. According to the Analog Devices MAX3243 manufacturer datasheet, this rate applies to the multichannel transceiver family that operates from 3 V to 5.5 V. The part integrates three drivers and five receivers, allowing several low-speed or moderate-speed serial links to share one interface IC. Actual application throughput also depends on the UART, cable characteristics, signal conditioning, and protocol timing, so system designers should preserve the datasheet's recommended interface layout.
Does MAX3243CWI+T have ESD protection for RS-232 connections?
Yes, the MAX3243CWI+T provides ±15 kV ESD protection on the RS-232 interface. The protection rating is identified in the Texas Instruments and Analog Devices MAX3243 product documentation and distinguishes the device from unprotected RS-232 line transceivers. ESD protection does not replace a complete board-level surge and ESD design, so designers should still use an appropriate connector and protection strategy where cables are exposed to severe industrial or outdoor environments. Maintain the recommended signal and return-path geometry to minimize electrostatic-discharge coupling.
What does AutoShutdown do in the MAX3243CWI+T?
AutoShutdown reduces the MAX3243CWI+T supply current to 1 µA when the receiver inputs do not detect a valid RS-232 signal level. The Analog Devices MAX3243 manufacturer datasheet explains that the internal charge-pump supply and drivers shut down under this condition, which is useful for battery-powered or intermittently connected equipment. The complementary always-active receiver can continue monitoring an external connection. Designers should account for startup and shutdown timing in systems that repeatedly connect and disconnect a cable or remote device.
Where can I download the MAX3243CWI+T datasheet PDF?
The official MAX3243 datasheet and product support are available from the Analog Devices product page at https://www.analog.com/en/products/max3243.html. That page links the MAX3243 family documentation, ordering information, and technical resources. The part is also listed by Texas Instruments at https://www.ti.com/product/MAX3243, which identifies the device as a 3 V to 5.5 V, 250 kbps multichannel RS-232 line driver and receiver with ±15 kV ESD protection. Use the family datasheet's package drawing and pin-description table when assigning the 28 connector and logic-side nets.
Where can I find the MAX3243CWI+T pinout?
The MAX3243CWI+T pinout is found in the pin-description table and package drawing of the official MAX3243 manufacturer datasheet at the Analog Devices product page. The device uses a 28-pin wide SOIC arrangement containing receiver outputs, receiver inputs, transmitter inputs, transmitter outputs, flow-control signals, supply pins, and charge-pump capacitor connections. Use the package drawing to confirm the physical terminal sequence rather than relying only on a functional block diagram. The verified part listing identifies a rectangular, gull-wing, 28-terminal surface-mount package.
Is MAX3243CWI+T a direct replacement for MAX3243EWI+?
The MAX3243EWI+ is the closest identified same-package alternative because both use the 28-pin wide SOIC footprint and implement the same 3-driver, 5-receiver MAX3243 function. The key distinction is operating grade: MAX3243CWI+T is identified as commercial grade, while the EWI+ ordering code denotes an extended-temperature option. Confirm the complete pin description, temperature limits, and production requirements in the manufacturer ordering documentation before substituting it into an existing design. It should not be assumed that every electrical and temperature condition remains unchanged.
When should I choose MAX3243CWI+T instead of another RS-232 transceiver?
Choose MAX3243CWI+T when a design needs three RS-232 drivers, five receiver channels, 3 V to 5.5 V operation, and a maximum data rate of 250 kbps in a 28-pin wide SOIC package. Its AutoShutdown function is valuable when the port must consume very little power between valid signals, while the always-active receiver supports external monitoring. Choose a different device if the required channel count, data rate, temperature grade, ESD rating, or connector protection differs. The footprint and logic functions must match before considering a replacement.
What can replace MAX3243CWI+T without changing the PCB?
The MAX3243EWI+ is the identified same-footprint replacement candidate because it retains the 28-pin wide SOIC package and the same MAX3243 multichannel RS-232 architecture. Its principal difference is the temperature-grade ordering option, so engineers should verify operating-temperature limits and all pin functions against the manufacturer datasheet. The MAX3243CPW and MAX3243ECPW variants use TSSOP packages and therefore are not drop-in replacements for a wide-SOIC PCB. A valid replacement requires the same footprint, pin functions, supply range, and acceptable electrical limits.
Is MAX3243CWI+T suitable for industrial control and instrumentation?
Yes, the MAX3243CWI+T is suitable for industrial control and instrumentation interfaces when its commercial operating grade and electrical ratings meet the system requirements. It supports 3 V to 5.5 V supply operation, RS-232 signaling at rates up to 250 kbps, and ±15 kV ESD protection. The three-driver, five-receiver configuration is useful for connecting a controller to several external devices. Industrial systems should additionally verify temperature limits, isolation needs, grounding strategy, and cable protection requirements during component qualification.
Where can I buy MAX3243CWI+T and what is its lead time?
Use the Request a Quote form on this page to request the current unit availability, lead time, and order quantity for MAX3243CWI+T. The request should specify the exact MAX3243CWI+T ordering code because related MAX3243 variants use different package or temperature-grade suffixes. Commercial availability can change by package configuration and production status, so confirm the current manufacturer lifecycle and shipment schedule at the time of quotation. The exact 28-pin wide SOIC package and tape-and-reel ordering designation should be stated on the purchase order.
What is the price of MAX3243CWI+T?
The current commercial price and quantity pricing for MAX3243CWI+T should be requested through the Request a Quote form on this page. The exact ordering code, including the +T packaging suffix, should be stated in the request so the quotation matches the 28-pin wide SOIC tape-and-reel configuration. Pricing can vary with order quantity, current inventory, and lifecycle conditions. The structured price data on this page is intended to provide the latest available commercial figure without relying on an outdated static quote.
Is MAX3243CWI+T in stock?
Current stock for MAX3243CWI+T should be confirmed through the Request a Quote form on this page. The manufacturer product page and distributor listings show that the MAX3243 family is currently marketed, but inventory for the exact +T ordering code can vary independently of the family. State the required quantity and package configuration in the request. For production planning, also request the estimated lead time and lifecycle confirmation rather than assuming generic family availability applies to every package suffix.
How does MAX3243CWI+T compare with MAX3232ECDR for RS-232 designs?
The MAX3243CWI+T offers three transmit drivers and five receive channels in a 28-pin wide SOIC, while the MAX3232ECDR is a different two-driver, two-receiver device associated with the site catalog. The MAX3243 therefore offers more RS-232 channels and supports operation from 3 V to 5.5 V at up to 250 kbps, with ±15 kV ESD protection. The MAX3232ECDR uses a different package and pin arrangement, so it is not a PCB drop-in replacement. Select it only when its lower channel count, package, and electrical characteristics satisfy the design.

נתוני עזר הנדסיים עבור MAX3243CWI+T — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose MAX3243CWI+T when the design needs a 28-pin wide SOIC RS-232 interface with three drivers, five receivers, 3 V to 5.5 V operation, and data rates up to 250 kbps. Its AutoShutdown and always-active receiver features are particularly useful in field modules, service consoles, and intermittently connected instruments. MAX3243EWI+ is the closest identified drop-in candidate because it retains the same wide-SOIC footprint and core interface functions, but its temperature-grade ordering option must be checked against the application. MAX3232ECDR offers only two drivers and two receivers, so choose it for simpler two-channel links rather than as a pin-compatible replacement. MAX232EIDR is appropriate for single-port designs. MAX3243CPW and MAX3243ECPW are not drop-in options because their TSSOP packages require a different PCB footprint.

השוואה עם חלופות

פרמטר מוצר זה MAX3243EWI+
Package 28-pin wide SOIC 28-pin wide SOIC - same
Brand Analog Devices Analog Devices
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 250 kbps 250 kbps
Transmit Drivers 3 channels 3 channels
Receive Channels 5 channels including complementary always-active receiver 5 channels including complementary always-active receiver
ESD Protection ±15 kV ±15 kV
AutoShutdown Supply Current 1 µA 1 µA
Temperature Grade Commercial Extended-temperature ordering option
Special Features AutoShutdown and complementary always-active receiver AutoShutdown and complementary always-active receiver

מבדילים עיקריים

  • Higher RS-232 channel count than two-channel transceivers (לעומתMAX3232ECDR)
  • True 3 V to 5.5 V operation (לעומתMAX232EIDR)
  • Multichannel always-active monitoring (לעומתMAX3232ECDR)

הערות תכנון

Place the charge-pump capacitors and supply-decoupling capacitors directly beside the associated MAX3243CWI+T pins, with short, symmetrical return paths. Keep the V+ and V- charge-pump routing away from receiver inputs and sensitive logic traces. The MAX3243 uses a 28-pin wide SOIC footprint, so confirm body width, lead pitch, and solder-pad dimensions against the package drawing before releasing artwork rather than treating every 28-pin SOIC footprint as interchangeable.

Route each RS-232 driver output toward its connector or protection component with a continuous ground reference and avoid sharing narrow stubs between ports. The MAX3243 supports rates up to 250 kbps, but long cables, connector transitions, and adjacent switching circuitry can still degrade the signal. Keep the three transmit channels physically separated from the five receive inputs where possible, and follow the manufacturer datasheet's recommended grounding and interface layout to reduce noise coupling.

Do not substitute MAX3243 packages solely because they all contain 28 pins. MAX3243CPW and MAX3243ECPW use TSSOP packages and cannot replace MAX3243CWI+T on the same PCB. Before using MAX3243EWI+, verify the operating-temperature range, production status, and complete pin functions in the manufacturer ordering documentation. Also allow the AutoShutdown circuit to wake before transmitting because the internal drivers and charge-pump supply remain inactive while no valid receiver signal is detected.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The verified product information does not explicitly state the RoHS, REACH, lead-free, halogen-free, or conflict-minerals status of the exact MAX3243CWI+T ordering code. The MAX3243 is a commercial-temperature interface IC, so AEC-Q100 qualification is not indicated.

הנתונים אומתו בתאריך: 2026-11-17 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

MAX3243CWI+T datasheet MAX3243CWI+T pinout MAX3243CWI+T datasheet pdf MAX3243CWI+T replacement MAX3243CWI+T equivalent MAX3243CWI+T footprint MAX3243CWI+T price MAX3243CWI+T stock MAX3243CWI+T vs MAX3243EWI+ Analog Devices MAX3243CWI+T MAX3243 3 to 5.5V RS232 MAX3243 250kbps transceiver MAX3243 28-SOIC pinout MAX3243 industrial control interface MAX3243 AutoShutdown RS232

רכיבים ומונחים קשורים

Analog Devices MAX3243CWI+T MAX3243 MAX3243EWI+ MAX3232ECDR MAX232EIDR MAX3237CAI+T RS-232 transceiver RS-232 line driver RS-232 receiver interface IC semiconductor AutoShutdown always-active receiver charge-pump supply 250 kbps data rate 3 V to 5.5 V operation ±15 kV ESD protection 28-pin wide SOIC SOIC package family surface-mount technology industrial control test and measurement legacy peripheral connectivity battery-powered equipment
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר