Texas Instruments

MAX3243EETI+ - 250kbps RS-232 IC | Texas Instruments

MPN: MAX3243EETI+ ✓ فعال
3 V to 5.5 V Vdss 1 µA Id QCCN Package
MOQ: 1 |

MAX3243EETI+ جائزہ

The Texas Instruments MAX3243EETI+ is a 3 V to 5.5 V multichannel RS-232 line driver and receiver rated for 250 kbps data rates, with ±15 kV ESD protection on its communication pins. The device is offered in a 28-terminal, no-lead square QCCN package and operates in the industrial temperature grade. A low 1 µA supply specification supports power-conscious serial-interface designs.

An RS-232 transceiver is an interface IC that combines a line driver, line receiver, and charge-pump voltage conversion in one package. It translates logic-level signals from a host or embedded controller into RS-232 levels and converts received RS-232 signals back to logic levels. Within the broader hierarchy of interface ICs, a multichannel RS-232 transceiver reduces component count, board area, and external voltage-doubling circuitry in multi-port serial systems.

The MAX3243EETI+ supports supply voltages from 3 V to 5.5 V, enabling operation in both 3.3 V and 5 V systems. Its 250 kbps maximum data rate suits industrial equipment, data-acquisition equipment, point-of-sale terminals, and instrument-control links. Integrated ±15 kV ESD protection helps protect the external serial interface from electrostatic discharge encountered during installation or connection to cables.

The MAX3243 family provides multiple drivers and receivers for RS-232 communication. When using the charge-pump section, the required capacitor arrangement and bypass components should follow the manufacturer datasheet's recommended application circuit. The integrated converter is intended to generate the positive and negative voltages required by RS-232, while the driver and receiver sections perform level conversion and signal conditioning.

Typical uses include industrial serial controllers, test equipment, security systems, medical-instrument interfaces, and point-of-sale hardware. The 250 kbps capability is suitable for links that are faster than legacy 9600-bit-per-second ports but do not require the throughput of a modern high-speed differential serial standard. Cable length and signal-integrity requirements should still be checked against the RS-232 electrical limits for the intended operating environment.

Place the MAX3243EETI+ close to the connector-side transceiver circuitry, keep the charge-pump capacitor loops compact, and provide a low-impedance ground return for each interface. Confirm logic levels, timing, shutdown behavior, and unused-channel connections in the manufacturer datasheet before releasing the PCB layout. Industrial temperature-grade qualification should also be checked against the complete assembly's environmental requirements.

This page consolidates the manufacturer's operating limits, package characteristics, comparison criteria, replacement guidance, and application-oriented design guidance into one engineering reference. It focuses on practical selection and integration decisions rather than repeating only the basic distributor catalog description.

کے لیے ڈراپ اِن متبادل MAX3243EETI+ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MAX3243EETI+ (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف ESD Protection, Product Type.

Analog Devices
ESD Protection: ±15 kV
Product Type: RS-232 transceiver
موازنہ کریں MAX3243EETI+ →

MAX3243EESA+

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 TQFN-28 (QCCN)
Same 3 V to 5.5 V supply, 250 kbps data rate, and 28-terminal QCCN family package; exact temperature-grade difference is not established

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MAX3243EEZI+

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 TQFN-28 (QCCN)
Same 3 V to 5.5 V supply, 250 kbps data rate, and 28-terminal QCCN family package; exact temperature-grade difference is not established

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MAX3243EETI+ تفصیلات

Product Type Multichannel RS-232 line driver and receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
ESD Protection ±15 kV HBM
Low Supply Current 1 µA
Number of Terminals 28 terminals
Package Code QCCN
Package Shape Square
Terminal Form No lead
ماؤنٹنگ ٹائپ Surface mount
Temperature Grade Industrial

MAX3243EETI+ square پن کنفیگریشن گائیڈ

MAX3243EETI+ (square پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

MAX3243EETI+ کے لیے square پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MAX3243EETI+.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

MAX3243EETI+ کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Serial Controllers, Test and Measurement Equipment, Point-of-Sale Terminals, Security and Surveillance Systems, Medical and Diagnostic Equipment, Data-Acquisition and Control Systems.

🏭

Industrial Serial Controllers

The MAX3243EETI+ fits industrial controllers that exchange RS-232 data with meters, actuators, service equipment, or remote I/O modules. Its 3 V to 5.5 V supply range accommodates 3.3 V and 5 V embedded platforms, while 250 kbps operation provides useful throughput for command and response traffic. The multichannel architecture can connect several serial endpoints when the application needs more than one RS-232 port. Place the transceiver near the connector, keep charge-pump loops compact, and validate the interface against the industrial equipment's voltage levels, cable length, and grounding arrangement.

🖥️

Test and Measurement Equipment

The MAX3243EETI+ is appropriate for laboratory and field-test instruments that use RS-232 for legacy instrument control or service consoles. A maximum data rate of 250 kbps supports responsive command traffic while remaining compatible with conventional RS-232 equipment. The 3 V to 5.5 V operating range allows the interface to operate alongside low-voltage control logic without requiring a separate 5 V-only transceiver. In a measurement instrument, protect the external line with a suitably rated connector, maintain a low-impedance ground reference, and verify timing and AutoShutdown behavior against the test protocol.

🖥️

Point-of-Sale Terminals

The MAX3243EETI+ can serve a point-of-sale terminal or peripheral hub that needs multiple RS-232 connections for scales, printers, customer displays, or magnetic-reader equipment. Its 250 kbps capability is more than adequate for short transaction-oriented commands, while the 3 V to 5.5 V supply range simplifies integration with embedded logic. The no-lead 28-terminal package also supports compact PCB layouts. Engineers should use the manufacturer pin descriptions for unused channels, maintain compatible logic levels, and test each cable and peripheral combination for ground-loop and ESD exposure before production.

🎥

Security and Surveillance Systems

The MAX3243EETI+ is useful in access-control panels, surveillance equipment, and alarm controllers that retain RS-232 links for configuration, diagnostics, or peripheral integration. Its ±15 kV HBM ESD rating adds interface protection for exposed cables and connector-accessible systems, while 250 kbps operation handles control traffic efficiently. The 3 V to 5.5 V supply range supports embedded processors operating on common industrial rails. The finished installation still requires a proper enclosure, chassis-ground strategy, and surge or secondary ESD protection when cables extend beyond the cabinet.

💊

Medical and Diagnostic Equipment

The MAX3243EETI+ can support legacy RS-232 service and configuration ports on medical or diagnostic instruments where an existing host computer communicates with the equipment. Its 250 kbps data rate and 3 V to 5.5 V operating range permit integration with compact control electronics. Because external serial connectors can be touched or connected during service, the interface should be evaluated with the complete system's ESD, isolation, and regulatory requirements rather than the IC rating alone. Use the manufacturer application circuit, preserve the ground reference, and verify the required logic levels and line termination.

⚡

Data-Acquisition and Control Systems

The MAX3243EETI+ fits multichannel data-acquisition units and control systems that must communicate with external instruments or legacy controllers. The 250 kbps rate supports moderate command throughput, and the multichannel RS-232 architecture reduces the need for separate transceiver packages. Its industrial temperature grade makes it suitable for equipment intended for controlled industrial environments. During design, route each cable according to the complete ground plan, keep the connector-side circuitry away from high-current switching nodes, and test the finished interface for transmission distance, timing margins, and immunity to system switching noise.

What is the operating voltage of MAX3243EETI+?
The MAX3243EETI+ operates from 3 V to 5.5 V according to the TI product page. This range supports both 3.3 V and 5 V digital systems, allowing the interface to share a supply rail with common embedded processors, microcontrollers, and industrial controllers. Confirm that every connected logic device and the selected charge-pump capacitors remain compatible with the chosen supply voltage before deploying the part in production equipment.
What is the maximum data rate of MAX3243EETI+?
The MAX3243EETI+ supports data rates up to 250 kbps. According to the manufacturer product information, this rate is suitable for multichannel RS-232 links in industrial equipment, test instruments, security systems, and data-acquisition products. Actual throughput also depends on cable characteristics, grounding, firmware latency, and the remote device's UART support, so the slower endpoint determines the usable link rate.
How much ESD protection does MAX3243EETI+ provide?
The MAX3243EETI+ provides ±15 kV human-body-model ESD protection, as stated on the TI product page. This rating strengthens the external serial interface against electrostatic discharge encountered during cable installation or maintenance. ESD protection does not replace correct signal grounding, connector design, or system-level surge protection, and it should be evaluated together with the cable routing and enclosure design.
Where can I download the MAX3243EETI+ datasheet?
The official MAX3243 datasheet can be downloaded through the TI product page at https://www.ti.com/lit/gpn/max3243. Use the manufacturer document for the complete pin description, electrical characteristics, recommended charge-pump capacitor values, typical application circuit, and operating limits. The manufacturer product page at https://www.ti.com/product/MAX3243 provides ordering information and links to supporting technical documentation.
Where can I find the MAX3243EETI+ pinout?
The MAX3243EETI+ pinout is documented in the manufacturer datasheet and on the official product page at https://www.ti.com/product/MAX3243. The package is identified as a 28-terminal, no-lead square QCCN package. Use the pin-description table and package drawing in the datasheet to assign every driver, receiver, supply, ground, charge-pump, and control connection before fabrication.
What are the key specifications of MAX3243EETI+ that engineers should know?
The principal MAX3243EETI+ specifications are a 3 V to 5.5 V supply range, operation up to 250 kbps, ±15 kV HBM ESD protection, a 1 µA low-supply-current figure, and an industrial temperature grade. According to the TI product page, it is a multichannel RS-232 line driver and receiver housed in a 28-terminal no-lead QCCN package. These characteristics define its suitability for low-voltage, medium-speed, multiport serial interfaces.
MAX3243EETI+ vs MAX3243EEUI+T - which is better for an industrial design?
The MAX3243EETI+ and MAX3243EEUI+T are not confirmed drop-in choices for one another because their package codes indicate different physical packages. The MAX3243EETI+ uses the 28-terminal QCCN package, while the EEUI ordering code denotes a different no-lead package. Both belong to the MAX3243 family, but the footprint, pin arrangement, exposed-pad requirements, and assembly process must be checked before considering either part for replacement.
When should I choose MAX3243EETI+ over another RS-232 transceiver?
Choose the MAX3243EETI+ when the design needs a 3 V to 5.5 V supply, operation up to 250 kbps, multichannel RS-232 communication, and ±15 kV HBM ESD protection in a 28-terminal QCCN package. It is particularly suitable when a compact surface-mount industrial interface is required. Choose another device when the application needs a different package, more channels, a different logic level, isolation, or a data rate outside the MAX3243 operating range.
Is MAX3243EETI+ suitable for industrial serial communication?
Yes, the MAX3243EETI+ is designated for the industrial temperature grade and provides 250 kbps RS-232 operation with ±15 kV HBM ESD protection. According to the TI product page, its 3 V to 5.5 V supply range fits modern embedded industrial equipment. For deployment, also verify the exact operating-temperature limits, isolation requirements, EMC plan, and connector construction for the completed system.
What can replace MAX3243EETI+?
A direct replacement for the MAX3243EETI+ should use the same 28-terminal QCCN footprint, provide 3 V to 5.5 V operation, support a comparable 250 kbps data rate, and maintain compatible driver, receiver, charge-pump, and control connections. The MAX3243EESA+ and MAX3243EEZI+ are same-family candidates to evaluate, but the manufacturer pin tables and ordering information must confirm exact compatibility before either is treated as a drop-in substitute.
Is MAX3243EETI+ the same as MAX3237CAI+T?
No, the MAX3243EETI+ and MAX3237CAI+T are different RS-232 transceiver families and should not be assumed to be pin-compatible. The MAX3243EETI+ uses a 28-terminal QCCN package, while the MAX3237CAI+T has a different ordering code and package designation. A board replacement requires a documented footprint, pin-function, supply, data-rate, and logic-level comparison rather than matching only the RS-232 protocol.
Where can I buy MAX3243EETI+ online?
The Request a Quote form on this page is the appropriate route for obtaining a current MAX3243EETI+ quotation, stock confirmation, and lead-time response. Provide the exact 28-terminal QCCN ordering code and required quantity so the quote can be matched without confusing it with other MAX3243 package or temperature-ordering variants. Commercial terms can change, so request current availability rather than relying on an archived catalog price.
What is the price of MAX3243EETI+?
The current price of the MAX3243EETI+ should be requested through the Request a Quote form on this page. The form can confirm the unit cost, quantity breaks, stock status, and lead time for the exact 28-terminal QCCN ordering code. Submitting the full MPN and intended quantity avoids pricing a different MAX3243 package, temperature grade, or reel configuration.
What is the lead time and stock status of MAX3243EETI+?
Current stock status and lead time for the MAX3243EETI+ should be confirmed through the Request a Quote form on this page. Include the required quantity, date code preference, and whether partial delivery is acceptable. The manufacturer product page remains the appropriate source for lifecycle status, while current order allocation is obtained through the quote request rather than an outdated distributor record.
How should MAX3243EETI+ charge-pump capacitors be placed?
Place the MAX3243EETI+ charge-pump and bypass capacitors close to their designated package pins, following the manufacturer datasheet's typical application circuit. Keep each capacitor's loop short and connect it directly to the associated ground or supply plane without routing through another circuit's current path. Confirm the exact capacitor values, voltage rating, dielectric, and tolerance from the datasheet before releasing the PCB layout.

کے لیے انجینئرنگ ریفرنس ڈیٹا MAX3243EETI+ — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the MAX3243EETI+ when an embedded system needs a compact, multichannel RS-232 interface operating from 3.3 V or 5 V, with data rates up to 250 kbps and ±15 kV HBM ESD protection. Its 28-terminal QCCN package suits compact industrial, test, security, and data-acquisition equipment. Evaluate MAX3243EESA+ or MAX3243EEZI+ when seeking another ordering code in the same family, but verify the manufacturer pin table, temperature grade, and orderable package first. Do not select MAX3237CAI+T as a board replacement without proving package and pin compatibility. If the design requires galvanic isolation, more than the MAX3243 channel count, different logic thresholds, or operation beyond 250 kbps, choose a transceiver explicitly specified for those requirements.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ MAX3243EESA+ MAX3243EEZI+
Brand Texas Instruments Texas Instruments Texas Instruments
Package 28-terminal QCCN 28-terminal QCCN 28-terminal QCCN
Product Type Multichannel RS-232 line driver and receiver Multichannel RS-232 line driver and receiver Multichannel RS-232 line driver and receiver
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 250 kbps 250 kbps 250 kbps
ESD Protection ±15 kV HBM ±15 kV HBM ±15 kV HBM
Low Supply Current 1 µA 1 µA 1 µA
Terminal Count 28 terminals 28 terminals 28 terminals

اہم امتیازی خصوصیات

  • Compact 28-terminal multichannel RS-232 integration (بمقابلہMAX3237CAI+T)
  • Supports both common embedded supply rails (بمقابلہ5 V-only RS-232 transceivers)
  • Higher communication rate than legacy RS-232 designs (بمقابلہ9600-bit-per-second legacy interface implementations)

ڈیزائن نوٹس

Place the MAX3243EETI+ and its charge-pump capacitors close to the transceiver pins. Keep capacitor loops short, connect decoupling directly to the device ground and supply pins, and avoid routing the charge-pump return through the same path used by external cable current. The recommended capacitor values and permitted dielectric types must be taken from the manufacturer datasheet because incorrect values can affect startup behavior, voltage ripple, and communication reliability.

Do not treat the RS-232 protocol name as proof that two transceivers are drop-in compatible. Confirm the exact package, exposed-pad requirements, pin names, supply voltage, logic thresholds, driver and receiver counts, shutdown behavior, and data rate before substituting a MAX3243 ordering code. The MAX3237CAI+T represents a different family and should not be installed on the MAX3243EETI+ footprint without a documented board-level conversion.

Give each RS-232 cable path a low-impedance return route and use the same reference-ground strategy at both ends. Keep the transceiver away from high-current switching nodes, and evaluate the completed assembly for conducted and radiated emissions because the ±15 kV HBM rating addresses electrostatic discharge rather than continuous EMI or surge energy. Shielding, filtering, and connector construction may be required for long or industrial cables.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The manufacturer listing identifies an industrial temperature grade but does not provide a RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement in the referenced technical summary.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-17 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

MAX3243EETI+ datasheet MAX3243EETI+ pinout MAX3243EETI+ datasheet pdf MAX3243EETI+ price MAX3243EETI+ stock Texas Instruments MAX3243EETI+ MAX3243EETI+ QCCN package MAX3243EETI+ 250kbps RS-232 MAX3243EETI+ equivalent MAX3243EETI+ replacement MAX3243EETI+ application circuit MAX3243EETI+ vs MAX3237CAI+T

متعلقہ اجزاء اور اصطلاحات

Texas Instruments MAX3243EETI+ MAX3243EESA+ MAX3243EEZI+ MAX3237CAI+T RS-232 RS-232 transceiver line driver line receiver multichannel interface IC Interface ICs semiconductor charge pump 3.3 V logic 5 V logic 250 kbps ±15 kV HBM ESD protection 28-terminal QCCN QFN package family surface mount SMD industrial temperature grade automatic shutdown electrostatic discharge
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں