MAX3243EETI+ - 250kbps RS-232 IC | Texas Instruments
MPN: MAX3243EETI+ ✓ فعالMAX3243EETI+ نمای کلی
An RS-232 transceiver is an interface IC that combines a line driver, line receiver, and charge-pump voltage conversion in one package. It translates logic-level signals from a host or embedded controller into RS-232 levels and converts received RS-232 signals back to logic levels. Within the broader hierarchy of interface ICs, a multichannel RS-232 transceiver reduces component count, board area, and external voltage-doubling circuitry in multi-port serial systems.
The MAX3243EETI+ supports supply voltages from 3 V to 5.5 V, enabling operation in both 3.3 V and 5 V systems. Its 250 kbps maximum data rate suits industrial equipment, data-acquisition equipment, point-of-sale terminals, and instrument-control links. Integrated ±15 kV ESD protection helps protect the external serial interface from electrostatic discharge encountered during installation or connection to cables.
The MAX3243 family provides multiple drivers and receivers for RS-232 communication. When using the charge-pump section, the required capacitor arrangement and bypass components should follow the manufacturer datasheet's recommended application circuit. The integrated converter is intended to generate the positive and negative voltages required by RS-232, while the driver and receiver sections perform level conversion and signal conditioning.
Typical uses include industrial serial controllers, test equipment, security systems, medical-instrument interfaces, and point-of-sale hardware. The 250 kbps capability is suitable for links that are faster than legacy 9600-bit-per-second ports but do not require the throughput of a modern high-speed differential serial standard. Cable length and signal-integrity requirements should still be checked against the RS-232 electrical limits for the intended operating environment.
Place the MAX3243EETI+ close to the connector-side transceiver circuitry, keep the charge-pump capacitor loops compact, and provide a low-impedance ground return for each interface. Confirm logic levels, timing, shutdown behavior, and unused-channel connections in the manufacturer datasheet before releasing the PCB layout. Industrial temperature-grade qualification should also be checked against the complete assembly's environmental requirements.
This page consolidates the manufacturer's operating limits, package characteristics, comparison criteria, replacement guidance, and application-oriented design guidance into one engineering reference. It focuses on practical selection and integration decisions rather than repeating only the basic distributor catalog description.
جایگزینهای drop-in برای MAX3243EETI+ — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای MAX3243EETI+ (همان فرمفاکتور و فوتپرینت) — متفاوت در ESD Protection, Product Type.
MAX3243EESA+
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
MAX3243EEZI+
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
MAX3243EETI+ مشخصات
| Product Type | Multichannel RS-232 line driver and receiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| ESD Protection | ±15 kV HBM |
| Low Supply Current | 1 µA |
| Number of Terminals | 28 terminals |
| Package Code | QCCN |
| Package Shape | Square |
| Terminal Form | No lead |
| نوع نصب | Surface mount |
| Temperature Grade | Industrial |
راهنمای پیکربندی پین MAX3243EETI+ square
پیکربندی پین برای MAX3243EETI+ (پکیج square). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای MAX3243EETI+.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
MAX3243EETI+ مناسب است برای 6 کاربردs: Industrial Serial Controllers, Test and Measurement Equipment, Point-of-Sale Terminals, Security and Surveillance Systems, Medical and Diagnostic Equipment, Data-Acquisition and Control Systems.
Industrial Serial Controllers
The MAX3243EETI+ fits industrial controllers that exchange RS-232 data with meters, actuators, service equipment, or remote I/O modules. Its 3 V to 5.5 V supply range accommodates 3.3 V and 5 V embedded platforms, while 250 kbps operation provides useful throughput for command and response traffic. The multichannel architecture can connect several serial endpoints when the application needs more than one RS-232 port. Place the transceiver near the connector, keep charge-pump loops compact, and validate the interface against the industrial equipment's voltage levels, cable length, and grounding arrangement.
پیشنهادی
Test and Measurement Equipment
The MAX3243EETI+ is appropriate for laboratory and field-test instruments that use RS-232 for legacy instrument control or service consoles. A maximum data rate of 250 kbps supports responsive command traffic while remaining compatible with conventional RS-232 equipment. The 3 V to 5.5 V operating range allows the interface to operate alongside low-voltage control logic without requiring a separate 5 V-only transceiver. In a measurement instrument, protect the external line with a suitably rated connector, maintain a low-impedance ground reference, and verify timing and AutoShutdown behavior against the test protocol.
پیشنهادی
Point-of-Sale Terminals
The MAX3243EETI+ can serve a point-of-sale terminal or peripheral hub that needs multiple RS-232 connections for scales, printers, customer displays, or magnetic-reader equipment. Its 250 kbps capability is more than adequate for short transaction-oriented commands, while the 3 V to 5.5 V supply range simplifies integration with embedded logic. The no-lead 28-terminal package also supports compact PCB layouts. Engineers should use the manufacturer pin descriptions for unused channels, maintain compatible logic levels, and test each cable and peripheral combination for ground-loop and ESD exposure before production.
پیشنهادی
Security and Surveillance Systems
The MAX3243EETI+ is useful in access-control panels, surveillance equipment, and alarm controllers that retain RS-232 links for configuration, diagnostics, or peripheral integration. Its ±15 kV HBM ESD rating adds interface protection for exposed cables and connector-accessible systems, while 250 kbps operation handles control traffic efficiently. The 3 V to 5.5 V supply range supports embedded processors operating on common industrial rails. The finished installation still requires a proper enclosure, chassis-ground strategy, and surge or secondary ESD protection when cables extend beyond the cabinet.
پیشنهادی
Medical and Diagnostic Equipment
The MAX3243EETI+ can support legacy RS-232 service and configuration ports on medical or diagnostic instruments where an existing host computer communicates with the equipment. Its 250 kbps data rate and 3 V to 5.5 V operating range permit integration with compact control electronics. Because external serial connectors can be touched or connected during service, the interface should be evaluated with the complete system's ESD, isolation, and regulatory requirements rather than the IC rating alone. Use the manufacturer application circuit, preserve the ground reference, and verify the required logic levels and line termination.
پیشنهادی
Data-Acquisition and Control Systems
The MAX3243EETI+ fits multichannel data-acquisition units and control systems that must communicate with external instruments or legacy controllers. The 250 kbps rate supports moderate command throughput, and the multichannel RS-232 architecture reduces the need for separate transceiver packages. Its industrial temperature grade makes it suitable for equipment intended for controlled industrial environments. During design, route each cable according to the complete ground plan, keep the connector-side circuitry away from high-current switching nodes, and test the finished interface for transmission distance, timing margins, and immunity to system switching noise.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای MAX3243EETI+ — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | MAX3243EESA+ | MAX3243EEZI+ |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-terminal QCCN | 28-terminal QCCN | 28-terminal QCCN |
| Product Type | Multichannel RS-232 line driver and receiver | Multichannel RS-232 line driver and receiver | Multichannel RS-232 line driver and receiver |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps | 250 kbps |
| ESD Protection | ±15 kV HBM | ±15 kV HBM | ±15 kV HBM |
| Low Supply Current | 1 µA | 1 µA | 1 µA |
| Terminal Count | 28 terminals | 28 terminals | 28 terminals |
تفاوتهای کلیدی
- Compact 28-terminal multichannel RS-232 integration (در مقابلMAX3237CAI+T)
- Supports both common embedded supply rails (در مقابل5 V-only RS-232 transceivers)
- Higher communication rate than legacy RS-232 designs (در مقابل9600-bit-per-second legacy interface implementations)
یادداشتهای طراحی
Place the MAX3243EETI+ and its charge-pump capacitors close to the transceiver pins. Keep capacitor loops short, connect decoupling directly to the device ground and supply pins, and avoid routing the charge-pump return through the same path used by external cable current. The recommended capacitor values and permitted dielectric types must be taken from the manufacturer datasheet because incorrect values can affect startup behavior, voltage ripple, and communication reliability.
Do not treat the RS-232 protocol name as proof that two transceivers are drop-in compatible. Confirm the exact package, exposed-pad requirements, pin names, supply voltage, logic thresholds, driver and receiver counts, shutdown behavior, and data rate before substituting a MAX3243 ordering code. The MAX3237CAI+T represents a different family and should not be installed on the MAX3243EETI+ footprint without a documented board-level conversion.
Give each RS-232 cable path a low-impedance return route and use the same reference-ground strategy at both ends. Keep the transceiver away from high-current switching nodes, and evaluate the completed assembly for conducted and radiated emissions because the ±15 kV HBM rating addresses electrostatic discharge rather than continuous EMI or surge energy. Shielding, filtering, and connector construction may be required for long or industrial cables.
اطلاعات انطباق
The manufacturer listing identifies an industrial temperature grade but does not provide a RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement in the referenced technical summary.