onsemi

MC14024BD - 7-Bit Binary Ripple Counter | onsemi

MPN: MC14024BD ✓ فعال
3 V to 18 V Vdss 14-pin SOIC Package Negative edge Speed
MOQ: 1 |

MC14024BD جائزہ

The onsemi MC14024BD is a 7-bit binary ripple counter IC with one counter element, negative-edge clock triggering, and a 14-pin SOIC package. It operates across a 3 V to 18 V supply range and provides buffered outputs for each of its seven counter stages. The device is designed for frequency division, event counting, timing generation, and digital state sequencing in conventional CMOS logic systems.

A binary ripple counter is a sequential digital logic device that advances through 2^n states as clock pulses arrive. The MC14024BD implements seven cascaded stages, allowing a single clock input to produce division ratios from 2 through 128 when the corresponding output stages are used. Its 3 V to 18 V supply range places it between conventional 5 V logic and higher-voltage CMOS-compatible equipment.

The principal features include short propagation delays, high maximum clock rates, buffered stage outputs, and hysteresis on the clock input for improved noise immunity. The reset input uses standard noise immunity. Unlike a synchronous counter, the ripple architecture changes adjacent output stages sequentially, which can create accumulated decoding delay when several outputs are decoded simultaneously.

Each counter stage is buffered, allowing the outputs to drive external logic while maintaining predictable logic levels. The manufacturer describes the MC14024BD as a pin-for-pin replacement for the CD4024B. The component is also identified as Pb-free and RoHS compliant in the manufacturer datasheet. A qualified NLV-prefixed option exists for automotive and other applications requiring unique site and control changes, but the exact NLV ordering code is not identified here.

Typical uses include dividing a system clock into slower timing intervals, counting recurring events, sequencing digital operations, generating programmable delays, and maintaining a modulo count in industrial control, instrumentation, and embedded peripheral logic. The counter can also operate as a one-shot or binary state register when its clock and reset inputs are driven according to the application requirements.

Designers should account for ripple propagation delay when decoding multiple outputs, allow sufficient clock rise and fall times for reliable CMOS operation, and use hysteresis benefits when the clock source is noisy. Decoupling capacitors should be placed close to the supply pins, while unused inputs must be held at a defined logic level. This page also organizes the available sourcing, comparison, and engineering guidance around the exact MC14024BD ordering code.

For a new design, the MC14024BD is most appropriate when a 14-pin SOIC footprint, seven binary count stages, and a 3 V to 18 V operating range are required. Because it is a ripple counter, a synchronous counter may be preferable when simultaneous output transitions must remain tightly aligned. For legacy repairs, confirm the exact pinout and electrical limits in the manufacturer datasheet before substituting an equivalent device onto an existing board.

کے لیے ڈراپ اِن متبادل MC14024BD — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

MC14024BD زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type 7-stage binary ripple counter
Number of Counter Elements 1 element
Counter Width 7 bits
Counting Direction Up
Clock Edge Negative edge
Supply Voltage Range 3 V to 18 V
Logic Family CMOS
Number of Stages 7 stages
Maximum Division Ratio 128
Clock Input Noise Immunity Enhanced by hysteresis
Reset Input Noise Immunity Standard
Output Stage Buffered
پیکیج 14-pin SOIC
ماؤنٹنگ ٹائپ Surface mount
Reference Compatibility Pin-for-pin replacement for CD4024B
RoHS اسٹیٹس Compliant
Lead-Free Status Pb-free

MC14024BD 14-pin soic پن کنفیگریشن گائیڈ

MC14024BD (14-pin soic پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

MC14024BD کے لیے 14-pin soic پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MC14024BD.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

MC14024BD کے لیے موزوں ہے 6 ایپلیکیشنs: Binary Frequency Divider, Industrial Event Counter, Digital State Sequencer, Instrumentation Timer, Legacy Counter Repair, Automotive Qualification Context.

⚡

Binary Frequency Divider

The MC14024BD fits frequency-divider designs that need selectable divide ratios from 2 through 128 using its seven counter outputs. Each stage is buffered, allowing a chosen output to drive a timing or control circuit without loading earlier stages. The negative-edge clock input and clock hysteresis are useful when the source is a noisy digital signal. Designers should select the stage according to the required ratio and confirm that the maximum input frequency remains within the manufacturer’s timing limits. Because the device uses ripple counting, outputs at different stages intentionally change sequentially, so they should not be treated as a synchronized binary bus.

🏭

Industrial Event Counter

The MC14024BD can count recurring events in industrial control and monitoring equipment while operating from a 3 V to 18 V supply. Its seven binary stages support counts up to 128 before overflow, and the buffered outputs expose intermediate count states for threshold comparison or control. The enhanced clock noise immunity provided by hysteresis helps reject disturbances on a switch-generated clock signal. Reset provides a deterministic way to return the counter to its initial state after an alarm or completed production cycle.

🔧

Digital State Sequencer

The seven-stage MC14024BD is useful for sequencing discrete control actions in legacy equipment and peripheral logic. A clock edge advances the internal state, while selected counter outputs can be decoded as step markers for relays, indicators, or data-capture devices. Buffered outputs reduce loading concerns when several stages drive logic gates. Engineers should account for ripple delay when decoding adjacent outputs, especially where two stages change close together. For a system requiring all decoded outputs to update together, a synchronous counter would offer a more appropriate timing model.

🖥️

Instrumentation Timer

The MC14024BD can divide a periodic measurement or trigger signal into slower intervals for test and measurement equipment. Multiple stages allow a design to select different timing divisions without redesigning the source clock circuit. The clock input’s hysteresis improves operation with noisy or slow-edge sources, while reset establishes a repeatable starting point for each measurement cycle. Timing margins should be evaluated at the system’s supply voltage and temperature because propagation delay and maximum clock frequency depend on operating conditions. The 14-pin SOIC package supports conventional surface-mount assembly and legacy board maintenance.

🔧

Legacy Counter Repair

The MC14024BD is a practical candidate for repairing boards that use a 14-pin CD4024B-style counter. The manufacturer explicitly describes the MC14024B family as a pin-for-pin replacement for the CD4024B, reducing the risk of footprint conversion in a legacy design. The replacement provides seven buffered counter stages, a negative-edge clock, and reset functionality. Before substitution, verify the original board’s supply voltage, clock waveform, pull resistors, and connected load. Review timing at the intended temperature and confirm any application-specific qualification requirements rather than assuming that every CD4024B implementation is interchangeable without review.

🚗

Automotive Qualification Context

The MC14024B family includes an NLV-prefixed option described by the manufacturer for automotive and other applications requiring unique site and control-change requirements, with AEC-Q100 qualification and PPAP support. That context is relevant when designing a counter for harsh automotive environments, although the exact NLV ordering code is not identified for this MC14024BD record. Engineers must select and verify the correct qualified MPN rather than infer automotive qualification from the base family name. The same 14-pin package family also helps preserve board-layout continuity when moving from a standard legacy counter to a qualified production option.

What is the MC14024BD?
The MC14024BD is a 7-stage, 7-bit CMOS binary ripple counter from onsemi with one counter element and negative-edge clock triggering. According to the manufacturer datasheet, it operates from 3 V to 18 V, uses buffered outputs, and is packaged in a 14-pin SOIC. It is intended for binary counting, frequency division, timing, and sequencing functions.
What is the supply voltage range of MC14024BD?
The MC14024BD operates from 3 V to 18 V. The 3 V to 18 V rating is identified in the onsemi MC14024B family documentation and reflected in the product listing. This range supports conventional 5 V CMOS systems as well as designs operating at higher logic voltages within the device's rated limits.
Where can I download the MC14024BD datasheet PDF?
The MC14024BD datasheet PDF is available from onsemi at https://www.onsemi.com/pdf/datasheet/mc14024b-d.pdf. The document covers the 7-stage ripple counter, including its buffered outputs, clock-input hysteresis, reset behavior, supply range, timing characteristics, and recommended application information.
Where can I find the MC14024BD pinout?
The MC14024BD pinout and connection details are shown in the manufacturer datasheet at https://www.onsemi.com/pdf/datasheet/mc14024b-d.pdf. Use the 14-pin SOIC diagram and pin-description table when assigning PCB tracks, especially because a correct physical connection does not necessarily guarantee correct counter-clock and reset behavior.
Is MC14024BD a pin-for-pin replacement for CD4024B?
Yes, the onsemi datasheet identifies the MC14024B family as a pin-for-pin replacement for the CD4024B. The MC14024BD is the 14-pin SOIC ordering variant and retains the seven counter stages, buffered outputs, clock input, and reset function. System-level timing and voltage conditions should still be checked against the applicable data limits.
MC14024BD vs CD4024B: which is better for a legacy design?
The MC14024BD is generally the better choice for a new or replacement implementation because onsemi explicitly identifies it as a pin-for-pin replacement for the CD4024B while providing a documented 3 V to 18 V operating range. The two devices therefore fit the same 14-pin SOIC footprint, subject to confirming electrical timing, temperature, and qualification requirements for the finished equipment.
When should I choose MC14024BD over a synchronous counter?
Choose the MC14024BD when simple binary counting and frequency division are needed and the outputs do not need to change simultaneously. Its seven buffered ripple stages are appropriate for modulo counters, slow state sequencing, and timing dividers. Choose a synchronous counter instead when multiple decoded outputs must update within one clock interval or when precise output alignment is critical.
What can replace the MC14024BD?
A valid replacement must use the same 14-pin SOIC footprint, provide seven counter outputs, retain compatible clock and reset behavior, and satisfy the 3 V to 18 V operating requirement. The manufacturer directly identifies the CD4024B as a pin-for-pin replacement. Other candidates should be accepted only after their pin assignments, edge triggering, output drive, and timing characteristics have been compared.
Is MC14024BD suitable for a frequency divider?
Yes, the MC14024BD is suitable for frequency division because it contains seven cascaded binary stages. Using the first output produces division by 2, while progressively higher stages provide division ratios up to 128. The usable input frequency must remain within the manufacturer-specified operating and temperature limits, and decoded multi-bit outputs must account for ripple delay.
What are the key specifications of MC14024BD that engineers should know?
The key MC14024BD specifications are a 3 V to 18 V supply range, seven binary counter stages, 14-pin SOIC packaging, negative-edge triggering, buffered outputs, clock-input hysteresis, and pin-for-pin compatibility with the CD4024B. These characteristics define its suitability for binary counting, frequency division, sequencing, and legacy CMOS logic replacements.
Where to buy MC14024BD online?
Use the Request a Quote form on this page to request MC14024BD availability, current commercial terms, and lead time for the exact ordering code. The manufacturer and distributor listing identifies the part as a 14-SOIC counter, but stock and delivery schedules can change. Specify the required quantity and packaging when submitting the request.
What is the price of MC14024BD?
Request the current MC14024BD unit price and quantity-break terms through the Request a Quote form on this page. The component is offered in a 14-pin SOIC package, and quotations should identify the exact MC14024BD ordering code so that packaging, grade, and delivery requirements are matched correctly.
What is the lead time for MC14024BD?
The current lead time for MC14024BD should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, packaging, manufacturing status, and destination. The manufacturer datasheet confirms the device family and environmental qualification options but does not establish a current order-specific delivery schedule.
Is MC14024BD in stock?
MC14024BD availability should be checked through the Request a Quote form on this page for the quantity and package required. A distributor search result may indicate inventory at the time of retrieval, but current stock is not a guaranteed order confirmation. The quotation response can provide allocation and delivery information for the exact MPN.
How does the ripple architecture affect MC14024BD decoding?
The MC14024BD ripple architecture advances successive stages with cumulative propagation delay, so adjacent outputs are not guaranteed to change at exactly the same instant. This is usually acceptable for simple division and slow sequencing, but it can produce decoding glitches when multiple outputs feed combinational logic. A synchronous counter is preferable when outputs must remain aligned.

کے لیے انجینئرنگ ریفرنس ڈیٹا MC14024BD — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the MC14024BD when the design needs a straightforward seven-bit binary ripple counter in a 14-pin SOIC package, particularly for frequency division, event counting, legacy timing, and slow state sequencing. Its 3 V to 18 V operating range, buffered outputs, clock hysteresis, and manufacturer-documented pin-for-pin relationship with the CD4024B make it suitable for both new CMOS designs and legacy repairs. Choose a synchronous counter instead when several decoded outputs must change in precise alignment, since ripple propagation can create intermediate decoding states. When replacing an existing CD4024B, verify the original clock waveform, supply voltage, operating temperature, reset implementation, and load requirements before approving the substitution.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Brand onsemi
Package 14-pin SOIC
Counter Type 7-stage binary ripple counter
Number of Counter Elements 1 element
Counter Width 7 bits
Counting Direction Up
Clock Edge Negative edge
Supply Voltage Range 3 V to 18 V
Output Stage Buffered
Clock Input Noise Immunity Enhanced by hysteresis
Reference Compatibility Pin-for-pin replacement for CD4024B

اہم امتیازی خصوصیات

  • Explicit pin-for-pin replacement path for legacy CD4024B designs (بمقابلہCD4024B)
  • Clock-input hysteresis improves noisy-edge tolerance (بمقابلہCD4024B reference implementation)
  • Seven buffered stages support flexible division and external loading (بمقابلہSingle-output divider arrangements)

ڈیزائن نوٹس

Use the MC14024BD clock hysteresis as part of the input design, especially when the clock originates from a mechanical switch, relay contact, or long trace. Keep the clock source edge clean and avoid routing it beside noisy analog or switching nodes. Because ripple-stage outputs change sequentially, decode only transitions that cannot produce a transient false code, and include the stage-to-stage propagation delay when analyzing multi-output decoding.

Place the supply-decoupling capacitor close to the device power pin and route the return path with minimal resistance. Keep the clock and reset traces away from switching-node copper and long parallel runs to unrelated signals. Although the clock input has hysteresis, good layout remains necessary for reliable operation. Use the manufacturer pin-description table when assigning the 14 SOIC connections, particularly for the reset input and supply pins.

Do not decode multiple MC14024BD stages as though the ripple outputs changed simultaneously. Adjacent stages can be separated by propagation delay, which may create a short decoded pulse or an intermediate count value. Also verify the actual supply voltage, clock amplitude, and operating temperature before using the device as a CD4024B replacement. Reset must be driven to a defined inactive level and unused inputs must not float.

تعمیل کی معلومات

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Yes
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The MC14024B manufacturer datasheet identifies the devices as Pb-free and RoHS compliant. It also describes an NLV-prefixed family option that is AEC-Q100 qualified and PPAP supported, but the exact NLV ordering code for the MC14024BD record is not identified. Reach, halogen-free, and conflict-minerals status are unknown.

متعلقہ تلاشیں

MC14024BD datasheet MC14024BD pinout MC14024BD datasheet pdf MC14024BD specifications MC14024BD equivalent MC14024BD replacement MC14024BD vs CD4024B onsemi MC14024BD MC14024BD 14 SOIC pinout MC14024BD frequency divider MC14024BD price MC14024BD stock 7 bit ripple counter 14 SOIC

متعلقہ اجزاء اور اصطلاحات

onsemi MC14024BD MC14024B CD4024B NLV binary ripple counter logic counter CMOS logic integrated circuit semiconductor seven-stage counter negative-edge clock clock hysteresis buffered output frequency divider event counter digital state sequencing 3 V to 18 V supply 14-pin SOIC SOIC package family surface mount SMD RoHS Pb-free AEC-Q100 PPAP
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں