MC14024BD - 7-Bit Binary Ripple Counter | onsemi
MPN: MC14024BD ✓ פעילMC14024BD סקירה
A binary ripple counter is a sequential digital logic device that advances through 2^n states as clock pulses arrive. The MC14024BD implements seven cascaded stages, allowing a single clock input to produce division ratios from 2 through 128 when the corresponding output stages are used. Its 3 V to 18 V supply range places it between conventional 5 V logic and higher-voltage CMOS-compatible equipment.
The principal features include short propagation delays, high maximum clock rates, buffered stage outputs, and hysteresis on the clock input for improved noise immunity. The reset input uses standard noise immunity. Unlike a synchronous counter, the ripple architecture changes adjacent output stages sequentially, which can create accumulated decoding delay when several outputs are decoded simultaneously.
Each counter stage is buffered, allowing the outputs to drive external logic while maintaining predictable logic levels. The manufacturer describes the MC14024BD as a pin-for-pin replacement for the CD4024B. The component is also identified as Pb-free and RoHS compliant in the manufacturer datasheet. A qualified NLV-prefixed option exists for automotive and other applications requiring unique site and control changes, but the exact NLV ordering code is not identified here.
Typical uses include dividing a system clock into slower timing intervals, counting recurring events, sequencing digital operations, generating programmable delays, and maintaining a modulo count in industrial control, instrumentation, and embedded peripheral logic. The counter can also operate as a one-shot or binary state register when its clock and reset inputs are driven according to the application requirements.
Designers should account for ripple propagation delay when decoding multiple outputs, allow sufficient clock rise and fall times for reliable CMOS operation, and use hysteresis benefits when the clock source is noisy. Decoupling capacitors should be placed close to the supply pins, while unused inputs must be held at a defined logic level. This page also organizes the available sourcing, comparison, and engineering guidance around the exact MC14024BD ordering code.
For a new design, the MC14024BD is most appropriate when a 14-pin SOIC footprint, seven binary count stages, and a 3 V to 18 V operating range are required. Because it is a ripple counter, a synchronous counter may be preferable when simultaneous output transitions must remain tightly aligned. For legacy repairs, confirm the exact pinout and electrical limits in the manufacturer datasheet before substituting an equivalent device onto an existing board.
חלופות תחליף ישיר עבור MC14024BD — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותMC14024BD דירוגים מרביים ומאפיינים חשמליים
| Product Type | 7-stage binary ripple counter |
| Number of Counter Elements | 1 element |
| Counter Width | 7 bits |
| Counting Direction | Up |
| Clock Edge | Negative edge |
| Supply Voltage Range | 3 V to 18 V |
| Logic Family | CMOS |
| Number of Stages | 7 stages |
| Maximum Division Ratio | 128 |
| Clock Input Noise Immunity | Enhanced by hysteresis |
| Reset Input Noise Immunity | Standard |
| Output Stage | Buffered |
| מארז | 14-pin SOIC |
| סוג הרכבה | Surface mount |
| Reference Compatibility | Pin-for-pin replacement for CD4024B |
| סטטוס RoHS | Compliant |
| Lead-Free Status | Pb-free |
מדריך תצורת פינים של MC14024BD 14-pin soic
תצורת פינים עבור MC14024BD (מארזת 14-pin soic). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור MC14024BD.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MC14024BD מתאים עבור 6 יישוםs: Binary Frequency Divider, Industrial Event Counter, Digital State Sequencer, Instrumentation Timer, Legacy Counter Repair, Automotive Qualification Context.
Binary Frequency Divider
The MC14024BD fits frequency-divider designs that need selectable divide ratios from 2 through 128 using its seven counter outputs. Each stage is buffered, allowing a chosen output to drive a timing or control circuit without loading earlier stages. The negative-edge clock input and clock hysteresis are useful when the source is a noisy digital signal. Designers should select the stage according to the required ratio and confirm that the maximum input frequency remains within the manufacturer’s timing limits. Because the device uses ripple counting, outputs at different stages intentionally change sequentially, so they should not be treated as a synchronized binary bus.
מומלץ
Industrial Event Counter
The MC14024BD can count recurring events in industrial control and monitoring equipment while operating from a 3 V to 18 V supply. Its seven binary stages support counts up to 128 before overflow, and the buffered outputs expose intermediate count states for threshold comparison or control. The enhanced clock noise immunity provided by hysteresis helps reject disturbances on a switch-generated clock signal. Reset provides a deterministic way to return the counter to its initial state after an alarm or completed production cycle.
מומלץ
Digital State Sequencer
The seven-stage MC14024BD is useful for sequencing discrete control actions in legacy equipment and peripheral logic. A clock edge advances the internal state, while selected counter outputs can be decoded as step markers for relays, indicators, or data-capture devices. Buffered outputs reduce loading concerns when several stages drive logic gates. Engineers should account for ripple delay when decoding adjacent outputs, especially where two stages change close together. For a system requiring all decoded outputs to update together, a synchronous counter would offer a more appropriate timing model.
מומלץ
Instrumentation Timer
The MC14024BD can divide a periodic measurement or trigger signal into slower intervals for test and measurement equipment. Multiple stages allow a design to select different timing divisions without redesigning the source clock circuit. The clock input’s hysteresis improves operation with noisy or slow-edge sources, while reset establishes a repeatable starting point for each measurement cycle. Timing margins should be evaluated at the system’s supply voltage and temperature because propagation delay and maximum clock frequency depend on operating conditions. The 14-pin SOIC package supports conventional surface-mount assembly and legacy board maintenance.
מומלץ
Legacy Counter Repair
The MC14024BD is a practical candidate for repairing boards that use a 14-pin CD4024B-style counter. The manufacturer explicitly describes the MC14024B family as a pin-for-pin replacement for the CD4024B, reducing the risk of footprint conversion in a legacy design. The replacement provides seven buffered counter stages, a negative-edge clock, and reset functionality. Before substitution, verify the original board’s supply voltage, clock waveform, pull resistors, and connected load. Review timing at the intended temperature and confirm any application-specific qualification requirements rather than assuming that every CD4024B implementation is interchangeable without review.
מומלץ
Automotive Qualification Context
The MC14024B family includes an NLV-prefixed option described by the manufacturer for automotive and other applications requiring unique site and control-change requirements, with AEC-Q100 qualification and PPAP support. That context is relevant when designing a counter for harsh automotive environments, although the exact NLV ordering code is not identified for this MC14024BD record. Engineers must select and verify the correct qualified MPN rather than infer automotive qualification from the base family name. The same 14-pin package family also helps preserve board-layout continuity when moving from a standard legacy counter to a qualified production option.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MC14024BD — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה |
|---|---|
| Brand | onsemi |
| Package | 14-pin SOIC |
| Counter Type | 7-stage binary ripple counter |
| Number of Counter Elements | 1 element |
| Counter Width | 7 bits |
| Counting Direction | Up |
| Clock Edge | Negative edge |
| Supply Voltage Range | 3 V to 18 V |
| Output Stage | Buffered |
| Clock Input Noise Immunity | Enhanced by hysteresis |
| Reference Compatibility | Pin-for-pin replacement for CD4024B |
מבדילים עיקריים
- Explicit pin-for-pin replacement path for legacy CD4024B designs (לעומתCD4024B)
- Clock-input hysteresis improves noisy-edge tolerance (לעומתCD4024B reference implementation)
- Seven buffered stages support flexible division and external loading (לעומתSingle-output divider arrangements)
הערות תכנון
Use the MC14024BD clock hysteresis as part of the input design, especially when the clock originates from a mechanical switch, relay contact, or long trace. Keep the clock source edge clean and avoid routing it beside noisy analog or switching nodes. Because ripple-stage outputs change sequentially, decode only transitions that cannot produce a transient false code, and include the stage-to-stage propagation delay when analyzing multi-output decoding.
Place the supply-decoupling capacitor close to the device power pin and route the return path with minimal resistance. Keep the clock and reset traces away from switching-node copper and long parallel runs to unrelated signals. Although the clock input has hysteresis, good layout remains necessary for reliable operation. Use the manufacturer pin-description table when assigning the 14 SOIC connections, particularly for the reset input and supply pins.
Do not decode multiple MC14024BD stages as though the ripple outputs changed simultaneously. Adjacent stages can be separated by propagation delay, which may create a short decoded pulse or an intermediate count value. Also verify the actual supply voltage, clock amplitude, and operating temperature before using the device as a CD4024B replacement. Reset must be driven to a defined inactive level and unused inputs must not float.
מידע על תאימות
The MC14024B manufacturer datasheet identifies the devices as Pb-free and RoHS compliant. It also describes an NLV-prefixed family option that is AEC-Q100 qualified and PPAP supported, but the exact NLV ordering code for the MC14024BD record is not identified. Reach, halogen-free, and conflict-minerals status are unknown.