MC14551BFG - 4-Channel 2:1 Analog Multiplexer | onsemi
MPN: MC14551BFG ✗ اختتامِ زندگیMC14551BFG جائزہ
An analog multiplexer is a semiconductor switch that connects one common node to one of two selectable signal paths. A demultiplexer reverses that routing function, allowing a shared circuit to select among multiple inputs or outputs. The MC14551B series implements a 4PDT solid-state switch in CMOS technology, placing four independently selectable 2:1 routing sections in one device. This architecture is useful whenever a system must share a limited number of amplifiers, converters, or measurement channels.
Key features include four 2:1 switch circuits, 280 ohm on-resistance, low off-state leakage, and control over analog signals across the complete supply range. The device uses digital control inputs with triple-diode protection on the control inputs, helping protect the switching circuitry from excessive input voltage. Its 3 V to 18 V operating supply range and -55 °C to +125 °C temperature range support industrial, communications, instrumentation, and extended-temperature equipment.
The MC14551BFG is a single-ended multiplexer with four common terminals and paired switched terminals. Its CMOS implementation provides low power consumption compared with mechanical or relay-based switching while preserving analog signal paths. Because the switch resistance contributes to insertion loss and the leakage current contributes to an error floor, the selected source impedance, signal amplitude, and system bandwidth should be considered during design.
Typical applications include data acquisition systems, programmable instrumentation, sensor signal routing, communication path selection, test and measurement equipment, and industrial control systems. The device is particularly useful when several analog sources must be connected to one processing chain while keeping routing compact and repeatable.
For PCB implementation, place the device near the signal paths that it routes and keep input and output traces short to minimize parasitic capacitance and pickup. Use a stable supply reference and appropriate bypass capacitance according to the onsemi datasheet. Confirm that control logic levels meet the specified input thresholds and that every selected analog node remains within the allowable signal range.
This page combines the manufacturer-linked technical identity, exact distributor package information, drop-in replacement analysis, comparison parameters, and application-focused design guidance for engineers evaluating the MC14551BFG.
کے لیے ڈراپ اِن متبادل MC14551BFG — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MC14551BFG (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Operating Temperature Range, Switch Configuration.
MC14551BDG
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MC14551BDR2G
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC14551BFG تفصیلات
| Device Type | Quad 2:1 analog multiplexer/demultiplexer |
| Number of Switch Circuits | 4 circuits |
| Switch Configuration | 4PDT solid-state switch |
| On Resistance | 280 ohm |
| Operating Supply Voltage Range | 3 V to 18 V |
| آپریٹنگ درجہ حرارت رینج | -55 °C to +125 °C |
| Control Inputs | Triple-diode protected digital control inputs |
| Analog Signal Control | Control over the complete supply-voltage range |
| Off Leakage Current | Very low off leakage current |
| Technology | CMOS |
| پیکیج | 16-pin SOIC (SOEIAJ) |
| Package Code | SOEIAJ |
| Number of Terminals | 16 |
| ماؤنٹنگ ٹائپ | Surface mount |
| Package Shape | Rectangular |
| Temperature Grade | Military |
| Signal Type | Single-ended analog |
| Switch Type | 2:1 multiplexer/demultiplexer |
| RoHS اسٹیٹس | unknown |
| REACH Status | unknown |
| AEC-Q100 Status | not_applicable |
MC14551BFG rectangular پن کنفیگریشن گائیڈ
MC14551BFG (rectangular پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MC14551BFG.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
MC14551BFG کے لیے موزوں ہے 6 ایپلیکیشنs: Multichannel Sensor Signal Routing, Data Acquisition Front Ends, Programmable Test and Measurement, Industrial Control Signal Routing, Communications Path Selection, Precision Signal Conditioning.
Multichannel Sensor Signal Routing
The MC14551BFG fits sensor-selection circuits that must connect one measurement chain to several analog sources. Its four 2:1 sections provide independent routing paths, while the 280 ohm on-resistance can be manageable when the selected amplifier has sufficiently high input impedance. The 3 V to 18 V supply range supports multiple embedded and industrial systems. A buffer should be placed after the multiplexer when sensor impedance, cable capacitance, or required measurement accuracy would make the switch resistance significant.
تجویز کردہ
Data Acquisition Front Ends
The MC14551BFG is useful in data-acquisition front ends that route several analog channels into shared amplification, filtering, or conversion circuitry. Four independent 2:1 paths let a controller select among sensor or conditioning outputs without using four separate analog switches. Its very low off leakage helps isolate unselected channels, although total error also depends on source impedance and downstream bias current. The 16-pin SOIC package supports compact surface-mount instrumentation with controlled PCB routing.
تجویز کردہ
Programmable Test and Measurement
The MC14551BFG can select test paths in programmable instrumentation because each of its four 2:1 sections routes an analog signal according to a digital control input. It is appropriate when a multiplexer must cover the complete 3 V to 18 V supply range while maintaining a compact implementation. Designers should include the 280 ohm switch resistance in accuracy calculations and verify leakage for high-impedance measurements. The -55 °C to +125 °C range also supports extended-temperature test environments.
تجویز کردہ
Industrial Control Signal Routing
The MC14551BFG can route analog command or feedback signals within industrial control equipment that uses shared input channels. The four independently addressed 2:1 switches allow one analog processing path to interact with multiple sources while keeping control logic digital. Its military temperature grade of -55 °C to +125 °C and 3 V to 18 V supply capability suit extended-temperature equipment. Layout should minimize analog trace length and keep switching-node capacitance low to preserve bandwidth.
تجویز کردہ
Communications Path Selection
The MC14551BFG is suitable for low-frequency analog path selection in communications equipment, especially where several receive or transmit branches must share a common processing chain. The device controls analog signals across the complete supply-voltage range and provides four separate 2:1 sections for flexible routing. Because no high-frequency bandwidth specification is available in the identified product records, engineers should verify the datasheet limits and impedance behavior before using it in demanding RF or high-speed paths.
تجویز کردہ
Precision Signal Conditioning
The MC14551BFG can be placed ahead of shared signal-conditioning stages when multiple analog nodes must feed one amplifier or filter chain. Low off leakage is beneficial for channel isolation, while the 280 ohm on-resistance determines how much the source impedance and switch network interact. For precision measurement, use high-impedance buffering and account for leakage, switch resistance, and temperature-dependent behavior in the error budget. The 16-pin surface-mount package simplifies integration into multichannel measurement boards.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MC14551BFG — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | MC14551BDG | MC14551BDR2G |
|---|---|---|---|
| Brand | onsemi | onsemi | onsemi |
| Package | 16-pin SOIC (SOEIAJ) | 16-pin SOIC (SOEIAJ) | 16-pin SOIC (SOEIAJ) |
| Device Type | Quad 2:1 analog multiplexer/demultiplexer | MC14551B-series analog multiplexer/demultiplexer | MC14551B-series analog multiplexer/demultiplexer |
| Switch Configuration | 4PDT solid-state switch | 4PDT solid-state switch | 4PDT solid-state switch |
| Number of Circuits | 4 circuits | 4 circuits | 4 circuits |
| Control Input Protection | Triple-diode protection | Triple-diode protection | Triple-diode protection |
| Technology | CMOS | CMOS | CMOS |
اہم امتیازی خصوصیات
- Four independent analog selections in one package (بمقابلہMC14551BDG)
- Extended-temperature capability (بمقابلہMC14551BDR2G)
- Compact four-channel routing (بمقابلہMC14551BDG)
ڈیزائن نوٹس
Include the 280 ohm on-resistance and source impedance in the complete signal-transfer calculation. For a switched source resistance of Rsource, the divider formed by Rsource and Ron gives an ideal attenuation of Rsource divided by Rsource plus Ron. Add downstream amplifier input impedance, PCB leakage, and temperature effects when the measurement requires high accuracy.
Route common, switched, control, and supply traces to minimize parasitic capacitance and coupling between adjacent channels. Place the device close to the shared analog processing chain, keep unselected and selected paths short, and provide a quiet ground reference. If several nodes carry high-impedance signals, use guarding and clean layout techniques to reduce leakage-induced errors.
Do not assume that family-name similarity guarantees exact replacement. Confirm pin numbering, package dimensions, control-input logic thresholds, temperature grade, maximum analog signal voltage, and supply limits for MC14551BDG or MC14551BDR2G before substituting either part into an MC14551BFG design. Also verify that the control signals remain within the permitted input range at every power state.
Design the supply path so the device receives a stable voltage across the intended 3 V to 18 V range. Place the manufacturer-recommended bypass capacitor close to the supply pins and route return current directly to the ground plane. Digital control transitions can inject current into analog nodes, so maintain separation between control routing and sensitive switched paths.
تعمیل کی معلومات
The identified product records do not provide authoritative RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. MC14551BFG is an interface IC, so AEC-Q100 is not applicable.