MC34072DG - Dual 44V Op Amp | onsemi | Industrial Amplification
MPN: MC34072DG ✓ فعالMC34072DG جائزہ
An operational amplifier, or op amp, is a voltage-feedback analog IC that amplifies the difference between its inverting and non-inverting inputs. The op amp belongs to the broader hierarchy of amplifier IC, analog IC, semiconductor, and signal-conditioning component. Its gain, input offset, slew rate, common-mode range, output swing, and noise determine how accurately it can process low-level signals in instrumentation, control, sensing, and signal-conditioning circuits.
The MC34072 family is particularly useful when a circuit must operate from a single positive supply while accepting signals near ground. Its 3.0 V to 44 V supply range provides flexibility for industrial control systems, test equipment, sensor interfaces, and power-supply feedback networks. The 4.5 MHz gain-bandwidth product supports higher-frequency closed-loop operation than a basic precision amplifier, while the 13 V/µs slew rate improves large-signal response. Two independent amplifiers are integrated in one 8-pin SOIC, reducing component count and board area.
MC34072DG is a commercial-temperature, standard general-purpose amplifier. The dual configuration provides separate input and output pins for channels A and B. Typical applications include buffer stages, active filters, transducers, current sensing, sample-and-hold circuitry, comparators, and general-purpose signal conditioning. The dual channel can also support independent signal paths, cascaded stages, or two channels of a differential or multichannel measurement system.
Single-supply operation requires careful attention to the input common-mode range and output swing. Inputs must remain inside the amplifier's valid common-mode region, and the output must be biased appropriately when processing signals centered near 0 V. Decoupling capacitors should be placed close to the supply pins, while feedback components should be kept compact to minimize parasitic coupling and preserve the intended bandwidth and stability behavior.
This page combines the manufacturer product information, exact MC34072DG orderable-part listings, package information, replacement references, application guidance, and engineering design notes. It also distinguishes package-compatible ordering variants from the dual MC33072DG option so that form, fit, function, and qualification requirements can be checked before PCB substitution.
کے لیے ڈراپ اِن متبادل MC34072DG — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
MC34072ADG
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC34072ADR2
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC34072DR2G
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC34072VDR2G
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC33072DG
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC34072DG زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Amplifier Type | Dual general-purpose operational amplifier |
| Number of Channels | 2 channels |
| Supply Voltage Range | 3.0 V to 44 V |
| Gain-Bandwidth Product | 4.5 MHz |
| Slew Rate | 13 V/µs |
| Typical Input Offset Voltage | 5 mV |
| پیکیج | 8-pin SOIC |
| ماؤنٹنگ ٹائپ | Surface mount |
| ٹوپولوجی | Single-ended |
| Input Transistor Technology | Bipolar, without JFET technology |
| Supply Configuration | Single supply or split supply |
| RoHS اسٹیٹس | Compliant |
| Lead-Free Status | Lead-free |
| Packaging Type | Tube |
MC34072DG پن کنفیگریشن
| پن 1 | OUTA — Channel A output |
| پن 2 | INA- — Channel A inverting input |
| پن 3 | INA+ — Channel A non-inverting input |
| پن 4 | V- — Negative supply connection |
| پن 5 | INB+ — Channel B non-inverting input |
| پن 6 | INB- — Channel B inverting input |
| پن 7 | OUTB — Channel B output |
| پن 8 | V+ — Positive supply connection |
عام استعمالات
MC34072DG کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor Signal Conditioning, Power-Supply Feedback and Control Loops, Active Filtering and Audio Preamplification, Test and Measurement Front Ends, Communication Interface Conditioning, LED and Lighting Control Circuits.
Industrial Sensor Signal Conditioning
The MC34072DG fits industrial sensor interfaces because its dual configuration can amplify or buffer two related channels while operating from a 3.0 V to 44 V supply. A 4.5 MHz gain-bandwidth product provides useful bandwidth for moderate-speed sensor signals, and the 13 V/µs slew rate supports cleaner response to waveform transitions than a low-bandwidth general-purpose amplifier. Place the device close to the sensor connector or protection network, use short feedback paths, and confirm that the sensor output remains inside the input common-mode range. Its 8-pin SOIC package also simplifies routing in compact measurement modules.
تجویز کردہ
Power-Supply Feedback and Control Loops
MC34072DG is appropriate for power-supply feedback, error amplification, and supervisory control loops because it can operate directly from supplies up to 44 V. The two amplifiers can handle separate feedback and auxiliary monitoring functions without requiring two packages. Its 4.5 MHz gain-bandwidth product permits useful loop bandwidth, while the 13 V/µs slew rate improves response during startup or load transients. Designers should still verify the common-mode range at the feedback divider, check output headroom, and use Kelvin routing when divider currents are low enough to make copper resistance significant.
تجویز کردہ
Active Filtering and Audio Preamplification
The MC34072DG can implement active filters, preamplifiers, and small-signal conditioning stages where two amplifiers share one package. Its 4.5 MHz gain-bandwidth product supports filter sections with moderate operating frequencies, and the bipolar input architecture supports practical low-level signal work without a JFET input stage. For audio preamplification, the 13 V/µs slew rate helps preserve large-signal dynamics and the 5 mV typical input offset supports straightforward coupling into the next stage. Confirm output swing, input noise, and stability at the intended gain before production.
تجویز کردہ
Test and Measurement Front Ends
The MC34072DG is useful in test and measurement front ends that require dual-channel buffering, gain, or active filtering around a 3.0 V to 44 V supply. The 4.5 MHz gain-bandwidth product provides headroom above many precision-only amplifiers, while the 13 V/µs slew rate improves settling around transient test signals. Use one channel for the measurement path and the other for buffering or active compensation, and place decoupling capacitors directly across the supply pins. Verify input-referred noise and offset for the lowest sensitivity ranges.
تجویز کردہ
Communication Interface Conditioning
MC34072DG can condition low-level communication signals, buffer logic-level interfaces, or implement threshold and level-shifting stages around communications equipment. The dual amplifier provides independent channels for transmit and receive paths, while its 3.0 V to 44 V operating range supports compatibility with higher-voltage legacy interfaces. The 4.5 MHz gain-bandwidth product is suitable for many low-to-moderate data-rate conditioning tasks, and the 13 V/µs slew rate helps maintain edge quality. Confirm logic thresholds, noise margin, common-mode limits, and output loading for the selected interface standard.
تجویز کردہ
LED and Lighting Control Circuits
The MC34072DG can serve as an error amplifier or signal-conditioning element in LED driver feedback and lighting-control systems. Its 3.0 V to 44 V supply capability suits systems operating above conventional low-voltage logic rails, while two channels can support separate feedback and monitoring functions. The 4.5 MHz gain-bandwidth product can support compensation networks, and the 13 V/µs slew rate improves response during brightness changes. Use appropriate output isolation or driver circuitry, and verify that the amplifier output cannot exceed the current-drive device's control input limits.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MC34072DG — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
Evaluate MC33072DG when its lower-positioned family characteristics are acceptable and it offers an advantageous supply or lifecycle path. It retains the dual 8-pin SOIC form factor, but detailed common-mode, output-swing, offset, and dynamic ratings must be checked before substitution. For an Analog Devices second source, the cross-reference search identifies a pin-to-pin option without naming the MPN in the retrieved result, so engineers should obtain the exact device and compare it against the full MC34072 electrical table before releasing a PCB substitution.
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | MC34072ADG | MC34072ADR2 | MC34072DR2G | MC34072VDR2G | MC33072DG |
|---|---|---|---|---|---|---|
| Brand | onsemi | onsemi | onsemi | onsemi | onsemi | onsemi |
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Amplifier Configuration | Dual | Dual | Dual | Dual | Dual | Dual |
اہم امتیازی خصوصیات
- Dual amplifier integration in one 8-pin SOIC (بمقابلہMC34072ADG)
- Wide single-supply operating range (بمقابلہMC33072DG)
- Higher specified dynamic performance (بمقابلہMC34072DG versus MC34072DR2G)
ڈیزائن نوٹس
Place the supply-bypass capacitor as close as practical to pins 4 and 8 of the 8-pin SOIC. Keep the ground return path short and connect the bypass capacitor directly into the relevant ground reference rather than routing its return through a long analog signal path. A large ground plane generally provides lower impedance for transient current than a narrow trace. This arrangement is especially important in single-supply circuits where the bypass capacitor must supply fast current as the amplifier output changes.
Keep input and feedback traces short, and avoid routing them parallel to power-supply or digital-switching paths. The MC34072DG has 4.5 MHz gain-bandwidth product, so feedback-loop layout can affect stability and usable bandwidth. Use a grounded guard or shielding strategy where the input source has high impedance, and keep the unused channel in a defined, stable state rather than allowing its input to float. Confirm the exact gain and phase margin against the final component tolerances.
Do not treat the 44 V maximum supply rating as permission to operate without normal power-supply and transient protection. Verify startup behavior, load current, input-voltage tolerance, and the maximum operating voltage in the manufacturer datasheet for the exact suffix and temperature grade. If the circuit connects to external wiring or an industrial bus, include suitable surge and reverse-polarity protection. Confirm that downstream components connected to the amplifier output also tolerate the available supply voltage.
تعمیل کی معلومات
The exact MC34072DG distributor listing describes the part as RoHS-compliant, lead-free, and green. REACH, halogen-free status, and conflict-minerals status require manufacturer confirmation.