onsemi

MC34072DG - Dual 44V Op Amp | onsemi | Industrial Amplification

料号: MC34072DG ✓ 量产中
3.0 V to 44 V Vdss 8-pin SOIC Package
最小起订量: 1 |

MC34072DG 概述

onsemi MC34072DG is a dual general-purpose operational amplifier optimized for single-supply operation from 3.0 V to 44 V. It provides two amplifiers in an 8-pin SOIC package, with 4.5 MHz gain-bandwidth product, 13 V/µs slew rate, and 5 mV typical input offset voltage. The part combines bipolar fabrication with a design that avoids JFET input transistors.

An operational amplifier, or op amp, is a voltage-feedback analog IC that amplifies the difference between its inverting and non-inverting inputs. The op amp belongs to the broader hierarchy of amplifier IC, analog IC, semiconductor, and signal-conditioning component. Its gain, input offset, slew rate, common-mode range, output swing, and noise determine how accurately it can process low-level signals in instrumentation, control, sensing, and signal-conditioning circuits.

The MC34072 family is particularly useful when a circuit must operate from a single positive supply while accepting signals near ground. Its 3.0 V to 44 V supply range provides flexibility for industrial control systems, test equipment, sensor interfaces, and power-supply feedback networks. The 4.5 MHz gain-bandwidth product supports higher-frequency closed-loop operation than a basic precision amplifier, while the 13 V/µs slew rate improves large-signal response. Two independent amplifiers are integrated in one 8-pin SOIC, reducing component count and board area.

MC34072DG is a commercial-temperature, standard general-purpose amplifier. The dual configuration provides separate input and output pins for channels A and B. Typical applications include buffer stages, active filters, transducers, current sensing, sample-and-hold circuitry, comparators, and general-purpose signal conditioning. The dual channel can also support independent signal paths, cascaded stages, or two channels of a differential or multichannel measurement system.

Single-supply operation requires careful attention to the input common-mode range and output swing. Inputs must remain inside the amplifier's valid common-mode region, and the output must be biased appropriately when processing signals centered near 0 V. Decoupling capacitors should be placed close to the supply pins, while feedback components should be kept compact to minimize parasitic coupling and preserve the intended bandwidth and stability behavior.

This page combines the manufacturer product information, exact MC34072DG orderable-part listings, package information, replacement references, application guidance, and engineering design notes. It also distinguishes package-compatible ordering variants from the dual MC33072DG option so that form, fit, function, and qualification requirements can be checked before PCB substitution.

直接替换替代料: MC34072DG ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

MC34072ADG

✅ 直接替换
📦 8-pin SOIC
Same 8-pin SOIC MC34072 family construction and core 3.0 V to 44 V, 4.5 MHz, and 13 V/µs positioning; ordering-code qualification differs by 0 V

📋 参考替代料(不在目录中)

MC34072ADR2

✅ 直接替换
📦 8-pin SOIC
Same 8-pin SOIC MC34072 family construction and core 3.0 V to 44 V, 4.5 MHz, and 13 V/µs positioning; ordering-code qualification differs by 0 V

📋 参考替代料(不在目录中)

MC34072DR2G

✅ 直接替换
📦 8-pin SOIC
Same 8-pin SOIC MC34072 family construction and core 3.0 V to 44 V, 4.5 MHz, and 13 V/µs positioning; ordering-code qualification differs by 0 V

📋 参考替代料(不在目录中)

MC34072VDR2G

✅ 直接替换
📦 8-pin SOIC
Same 8-pin SOIC MC34072 family construction and core 3.0 V to 44 V, 4.5 MHz, and 13 V/µs positioning; ordering-code qualification differs by 0 V

📋 参考替代料(不在目录中)

MC33072DG

✅ 直接替换
📦 8-pin SOIC
Same dual 8-pin SOIC footprint and single-supply amplifier positioning; MC34072DG is specified at 4.5 MHz GBW and 13 V/µs, while detailed MC33072DG deltas require datasheet verification

📋 参考替代料(不在目录中)

MC34072DG 最大额定值与电气特性

Amplifier Type Dual general-purpose operational amplifier
Number of Channels 2 channels
Supply Voltage Range 3.0 V to 44 V
Gain-Bandwidth Product 4.5 MHz
Slew Rate 13 V/µs
Typical Input Offset Voltage 5 mV
封装 8-pin SOIC
安装类型 Surface mount
拓扑 Single-ended
Input Transistor Technology Bipolar, without JFET technology
Supply Configuration Single supply or split supply
RoHS 状态 Compliant
Lead-Free Status Lead-free
Packaging Type Tube

MC34072DG 引脚配置

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
引脚 1 OUTA — Channel A output
引脚 2 INA- — Channel A inverting input
引脚 3 INA+ — Channel A non-inverting input
引脚 4 V- — Negative supply connection
引脚 5 INB+ — Channel B non-inverting input
引脚 6 INB- — Channel B inverting input
引脚 7 OUTB — Channel B output
引脚 8 V+ — Positive supply connection

典型应用

MC34072DG 适用于 6 应用s: Industrial Sensor Signal Conditioning, Power-Supply Feedback and Control Loops, Active Filtering and Audio Preamplification, Test and Measurement Front Ends, Communication Interface Conditioning, LED and Lighting Control Circuits.

🏭

Industrial Sensor Signal Conditioning

The MC34072DG fits industrial sensor interfaces because its dual configuration can amplify or buffer two related channels while operating from a 3.0 V to 44 V supply. A 4.5 MHz gain-bandwidth product provides useful bandwidth for moderate-speed sensor signals, and the 13 V/µs slew rate supports cleaner response to waveform transitions than a low-bandwidth general-purpose amplifier. Place the device close to the sensor connector or protection network, use short feedback paths, and confirm that the sensor output remains inside the input common-mode range. Its 8-pin SOIC package also simplifies routing in compact measurement modules.

⚡

Power-Supply Feedback and Control Loops

MC34072DG is appropriate for power-supply feedback, error amplification, and supervisory control loops because it can operate directly from supplies up to 44 V. The two amplifiers can handle separate feedback and auxiliary monitoring functions without requiring two packages. Its 4.5 MHz gain-bandwidth product permits useful loop bandwidth, while the 13 V/µs slew rate improves response during startup or load transients. Designers should still verify the common-mode range at the feedback divider, check output headroom, and use Kelvin routing when divider currents are low enough to make copper resistance significant.

🎧

Active Filtering and Audio Preamplification

The MC34072DG can implement active filters, preamplifiers, and small-signal conditioning stages where two amplifiers share one package. Its 4.5 MHz gain-bandwidth product supports filter sections with moderate operating frequencies, and the bipolar input architecture supports practical low-level signal work without a JFET input stage. For audio preamplification, the 13 V/µs slew rate helps preserve large-signal dynamics and the 5 mV typical input offset supports straightforward coupling into the next stage. Confirm output swing, input noise, and stability at the intended gain before production.

🔧

Test and Measurement Front Ends

The MC34072DG is useful in test and measurement front ends that require dual-channel buffering, gain, or active filtering around a 3.0 V to 44 V supply. The 4.5 MHz gain-bandwidth product provides headroom above many precision-only amplifiers, while the 13 V/µs slew rate improves settling around transient test signals. Use one channel for the measurement path and the other for buffering or active compensation, and place decoupling capacitors directly across the supply pins. Verify input-referred noise and offset for the lowest sensitivity ranges.

🌐

Communication Interface Conditioning

MC34072DG can condition low-level communication signals, buffer logic-level interfaces, or implement threshold and level-shifting stages around communications equipment. The dual amplifier provides independent channels for transmit and receive paths, while its 3.0 V to 44 V operating range supports compatibility with higher-voltage legacy interfaces. The 4.5 MHz gain-bandwidth product is suitable for many low-to-moderate data-rate conditioning tasks, and the 13 V/µs slew rate helps maintain edge quality. Confirm logic thresholds, noise margin, common-mode limits, and output loading for the selected interface standard.

💡

LED and Lighting Control Circuits

The MC34072DG can serve as an error amplifier or signal-conditioning element in LED driver feedback and lighting-control systems. Its 3.0 V to 44 V supply capability suits systems operating above conventional low-voltage logic rails, while two channels can support separate feedback and monitoring functions. The 4.5 MHz gain-bandwidth product can support compensation networks, and the 13 V/µs slew rate improves response during brightness changes. Use appropriate output isolation or driver circuitry, and verify that the amplifier output cannot exceed the current-drive device's control input limits.

What are the key specifications of MC34072DG that engineers should know?
The MC34072DG is a dual, general-purpose operational amplifier with a 3.0 V to 44 V supply range, 4.5 MHz gain-bandwidth product, 13 V/µs slew rate, and 5 mV typical input offset voltage. According to the onsemi MC34072 product page and the MC34072 family datasheet, the device is supplied in an 8-pin SOIC and is designed for single-supply or split-supply operation. The two integrated channels can perform buffering, amplification, filtering, and general signal conditioning.
Where can I download the MC34072DG datasheet PDF?
The official MC34072DG documentation is available through the onsemi MC34072 product page at https://www.onsemi.com/products/standard-products/amplifiers-comparators/operational-amplifiers-op-amps/mc34072. That manufacturer page provides the family datasheet and product information for MC34072 devices. The MC34072DG ordering code identifies the dual amplifier in an 8-pin SOIC package. Use the manufacturer pin-description and electrical-characteristics tables when assigning PCB connections and finalizing a footprint.
Where can I find the MC34072DG pinout?
The MC34072DG pinout is shown in the manufacturer datasheet and follows the standard 8-pin SOIC pin arrangement for the dual amplifier. Pins 1, 2, and 3 provide output A, inverting input A, and non-inverting input A, while pins 6, 5, and 7 provide inverting input B, non-inverting input B, and output B. Pins 4 and 8 are the negative and positive supplies. Confirm all assignments against the manufacturer pin-description table before layout release.
Is MC34072DG suitable for single-supply operation?
Yes, the MC34072DG is particularly suited to single-supply operation over 3.0 V to 44 V. The onsemi family documentation identifies the device as a bipolar operational amplifier intended for both single and split supplies. In a single-supply circuit, the input signal and output must remain within the amplifier's specified common-mode and output-swing limits. Use the datasheet limits to select the bias point for signals that approach ground.
What is the difference between MC34072DG and MC33072DG?
Both MC34072DG and MC33072DG are dual amplifiers associated with the onsemi single-supply amplifier family, and both are represented in the MC34072 comparison search. The verified MC34072DG listing specifies 4.5 MHz gain-bandwidth product and 13 V/µs slew rate, while the corresponding MC33072DG specifications require comparison against its manufacturer datasheet. Both alternatives use an 8-pin SOIC footprint, so engineers should verify channel functions, electrical limits, temperature grade, and qualification before substitution.
When should I choose MC34072DG over MC34072DR2G?
Choose MC34072DG when the design calls for the onsemi MC34072 family in an 8-pin SOIC and the commercial ordering route MC34072DG satisfies the assembly requirements. MC34072DR2G is another listed 8-SOIC member of the same family, but its ordering code may be associated with a different delivery or qualification configuration. Confirm the exact suffix, temperature grade, package drawing, and production requirements before deciding between the two orderable part numbers.
What is the best drop-in replacement for MC34072DG?
MC34072ADG is the closest listed replacement candidate for MC34072DG because both are MC34072-family dual amplifiers associated with an 8-pin SOIC configuration and have the same core 3.0 V to 44 V supply, 4.5 MHz bandwidth, and 13 V/µs slew-rate positioning. MC34072DR2G, MC34072ADR2, MC34072VDR2G, and MC33072DG are additional comparison candidates. Verify the manufacturer ordering table, pin assignment, and qualification status before treating any candidate as an exact production substitute.
Can MC34072ADG replace MC34072DG on an existing PCB?
MC34072ADG is a pin-compatible candidate for MC34072DG because both are listed as 8-pin SOIC MC34072-family dual amplifiers with the same core voltage and dynamic specifications. Form, fit, and function therefore align at the package and primary performance level. Before production substitution, compare the exact pin table, temperature range, supply limits, output-swing conditions, and ordering suffix for the specific device being replaced. PCB redesign is not normally required for this same-package exchange.
What can replace MC34072DG in a single-supply amplifier circuit?
MC34072DR2G, MC34072ADG, MC34072ADR2, and MC33072DG can be evaluated as pin-compatible alternatives to MC34072DG because they appear in the MC34072 replacement and comparison search with an 8-pin SOIC form factor. The MC34072-family options preserve the 3.0 V to 44 V supply positioning, while MC33072DG requires closer comparison of its dynamic characteristics. Check common-mode range, output swing, offset, slew rate, temperature range, and qualification for the actual circuit.
Is MC34072DG the same as MC34072DR2G?
MC34072DG and MC34072DR2G are not interchangeable solely because their full ordering codes differ; they are both listed MC34072-family dual amplifiers in 8-pin SOIC packages with closely aligned electrical specifications. The suffix identifies the specific ordered configuration and should be checked against the onsemi ordering information. For a finished design, verify the pinout, temperature grade, package dimensions, lead finish, and production status. The same SOIC footprint does not eliminate the need for suffix-level qualification.
What is the best Analog Devices equivalent for MC34072DG?
The MC34072 cross-reference search identifies one pin-to-pin replacement from Analog Devices, but the retrieved result does not expose the specific Analog Devices MPN or its full parameter table. A responsible substitution therefore cannot be named from the cross-reference summary alone. Use the onsemi cross-reference service or the Analog Devices product selector with the MC34072 requirements of dual channel, 8-pin SOIC, 3.0 V to 44 V supply, and 4.5 MHz gain-bandwidth product, then compare offset, slew rate, common-mode range, output swing, and temperature limits.
Where to buy MC34072DG online?
Use the Request a Quote form on this page to request MC34072DG availability, order confirmation, and current lead time. The verified MC34072DG listings include the onsemi manufacturer family page, DigiKey part listing, Mouser product listing, and an Octopart aggregation page. XAIPART can quote the exact 8-pin SOIC orderable part number MC34072DG and confirm the required assembly and delivery configuration before an order is placed.
What is the price of MC34072DG?
The current commercial terms for MC34072DG are shown through the Request a Quote form on this page. Pricing can vary with order quantity, inventory, delivery schedule, and package configuration, so use the quote form for the quantity and shipment you need. The identified part is the onsemi MC34072DG in an 8-pin SOIC package, not the broader MC34072 family or a development board. The request form is the appropriate route for current unit and volume quotations.
What is the lead time for MC34072DG?
Request the current MC34072DG lead time through the Request a Quote form on this page. The manufacturer product page provides contact and sales options, while distributor listings can indicate market availability. Lead time depends on the requested quantity, inventory position, packaging, and shipment destination. Engineers should also allow time for incoming inspection, especially when changing between MC34072-family ordering suffixes with the same SOIC footprint.
Is MC34072DG in stock?
MC34072DG availability should be confirmed through the Request a Quote form on this page. The exact orderable part is listed for MC34072DG by multiple authorized distribution channels, but live inventory changes with order volume and fulfillment schedules. When requesting a quote, specify the required quantity, target date, and shipment location. That allows the order to be checked against current stock and manufacturing supply rather than relying on a potentially stale listing status.
What design considerations matter for a high-voltage MC34072DG amplifier?
The most important MC34072DG design consideration is keeping the amplifier within its specified electrical limits, especially at the upper end of the 3.0 V to 44 V supply range. Confirm input common-mode voltage, output swing, supply current, and thermal conditions from the manufacturer datasheet. Place supply-bypass capacitors close to pins 4 and 8, keep feedback and input traces short, and avoid floating unused amplifier channels. Grounding, shielding, and stable reference returns are also essential in high-gain instrumentation circuits.

工程参考数据: MC34072DG ——对比、设计指导和合规信息。

选型指南

Choose MC34072DG when a design requires two general-purpose amplifier channels, a 3.0 V to 44 V supply range, and the family’s 4.5 MHz gain-bandwidth product with 13 V/µs slew rate. The 8-pin SOIC package is appropriate for conventional surface-mount layouts and provides a direct comparison path with MC34072ADG, MC34072ADR2, MC34072DR2G, and MC34072VDR2G. Select the suffix whose temperature, qualification, and ordering conditions match the production requirement rather than treating every family member as automatically equivalent.

Evaluate MC33072DG when its lower-positioned family characteristics are acceptable and it offers an advantageous supply or lifecycle path. It retains the dual 8-pin SOIC form factor, but detailed common-mode, output-swing, offset, and dynamic ratings must be checked before substitution. For an Analog Devices second source, the cross-reference search identifies a pin-to-pin option without naming the MPN in the retrieved result, so engineers should obtain the exact device and compare it against the full MC34072 electrical table before releasing a PCB substitution.

与替代料对比

参数 本产品 MC34072ADG MC34072ADR2 MC34072DR2G MC34072VDR2G MC33072DG
Brand onsemi onsemi onsemi onsemi onsemi onsemi
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Amplifier Configuration Dual Dual Dual Dual Dual Dual

关键差异点

  • Dual amplifier integration in one 8-pin SOIC (对比 MC34072ADG)
  • Wide single-supply operating range (对比 MC33072DG)
  • Higher specified dynamic performance (对比 MC34072DG versus MC34072DR2G)

设计说明

Place the supply-bypass capacitor as close as practical to pins 4 and 8 of the 8-pin SOIC. Keep the ground return path short and connect the bypass capacitor directly into the relevant ground reference rather than routing its return through a long analog signal path. A large ground plane generally provides lower impedance for transient current than a narrow trace. This arrangement is especially important in single-supply circuits where the bypass capacitor must supply fast current as the amplifier output changes.

Keep input and feedback traces short, and avoid routing them parallel to power-supply or digital-switching paths. The MC34072DG has 4.5 MHz gain-bandwidth product, so feedback-loop layout can affect stability and usable bandwidth. Use a grounded guard or shielding strategy where the input source has high impedance, and keep the unused channel in a defined, stable state rather than allowing its input to float. Confirm the exact gain and phase margin against the final component tolerances.

Do not treat the 44 V maximum supply rating as permission to operate without normal power-supply and transient protection. Verify startup behavior, load current, input-voltage tolerance, and the maximum operating voltage in the manufacturer datasheet for the exact suffix and temperature grade. If the circuit connects to external wiring or an industrial bus, include suitable surge and reverse-polarity protection. Confirm that downstream components connected to the amplifier output also tolerate the available supply voltage.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Qualified
无铅
Yes
无卤
Unknown
冲突矿物
Unknown

The exact MC34072DG distributor listing describes the part as RoHS-compliant, lead-free, and green. REACH, halogen-free status, and conflict-minerals status require manufacturer confirmation.

相关搜索

MC34072DG MC34072DG datasheet MC34072DG datasheet pdf MC34072DG pinout onsemi MC34072DG MC34072DG equivalent MC34072DG replacement MC34072DG cross reference MC34072DG vs MC33072DG MC34072DG footprint MC34072DG application circuit MC34072DG price

相关元器件 & 术语

onsemi MC34072DG MC34072ADG MC34072ADR2 MC34072DR2G MC34072VDR2G MC33072DG Operational amplifier Op amp Dual amplifier Voltage-feedback amplifier Analog integrated circuit Semiconductor Signal conditioning Single-supply operation Split-supply operation Bipolar input stage JFET-free input design Gain-bandwidth product Slew rate Input offset voltage 8-pin SOIC SOIC package family Surface-mount package Industrial sensor interface Active filter Power-supply feedback
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情