آخری بار خریداری کا نوٹس: MC9S08MP16VLF اپنی زندگی کے اختتام کے قریب ہے۔ آخری آرڈر کی تاریخ: ہم سے رابطہ کریں. دستیاب متبادل پرزے دیکھیں →
NXP Semiconductors

MC9S08MP16VLF - 51.34MHz 16KB Flash S08 MCU | NXP

MPN: MC9S08MP16VLF ✗ اختتامِ زندگی
3.3 V or 5 V Vdss 48-pin LQFP, 7 mm × 7 mm Package 51.34 MHz Speed 16 KB (16K × 8) Memory
MOQ: 1 |

MC9S08MP16VLF جائزہ

NXP Semiconductors MC9S08MP16VLF is an 8-bit S08 microcontroller operating at up to 51.34 MHz, with 16 KB of Flash memory and a 48-pin LQFP (7 mm × 7 mm) package. It is designed for cost-sensitive motor-control systems, combining an S08 MCU core with dedicated PWM, analog-comparator, and programmable-gain-amplifier resources in an integrated embedded-control device.

An 8-bit microcontroller is a compact embedded processor designed to execute control, monitoring, and communication tasks with deterministic peripheral handling. The MC9S08MP16 belongs to the S08 family of 8-bit MCUs, combining processor logic with timers, communication interfaces, analog conversion functions, and I/O resources in one package. This integration allows a motor-control design to use fewer discrete components than a solution built from separate logic and analog components.

The MC9S08MP16VLF provides 16 KB (16K × 8) Flash program memory and operates at a listed frequency of 51.34 MHz. Its 8-channel PWM/flextimer module supports hardware dead-time insertion for motor-control applications, while analog comparators and a programmable gain amplifier support signal conditioning and feedback functions. The listed operating-voltage range is 3.3 V or 5 V, providing flexibility between industrial and automotive-style embedded systems.

The S08 architecture uses an 8-bit CISC-style instruction set and integrates peripherals closely with the processor core. For motor-control designs, the combination of hardware PWM, dead-time insertion, comparators, and programmable gain can reduce software timing dependence and simplify complementary-switch drive implementation. The 48-pin LQFP package also provides a higher pin count than compact 20-pin and 32-pin MCUs, increasing access to peripheral and I/O functions while maintaining a surface-mount assembly format.

Typical uses include entry-level brushless DC motor controllers, industrial motor drives, automotive accessories, cooling systems, and compact embedded-control products. The MC9S08MP16VLF is especially relevant where an 8-bit architecture, dedicated PWM channels, analog feedback, and 16 KB of Flash are sufficient without adopting a higher-cost 32-bit processor.

Designers should review the MC9S08MP16 series datasheet before assigning pins or designing the power system. In particular, confirm the detailed pin multiplexing, oscillator options, analog-reference requirements, and programming interface against the specific board revision. The device is listed as end of life, so new production designs should also account for availability and lifecycle risk during sourcing review.

This product record combines the manufacturer lifecycle status, distributor specifications, an official series datasheet, package information, and practical application guidance. It also distinguishes verified drop-in replacements from unrelated S08 devices, helping engineers evaluate direct replacement options without assuming that similar memory sizes or clock rates guarantee pin compatibility.

کے لیے ڈراپ اِن متبادل MC9S08MP16VLF — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

MC9S08MP16VLF زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type 8-bit S08 microcontroller
زیادہ سے زیادہ کلاک فریکوئنسی 51.34 MHz
Flash Memory 16 KB (16K × 8)
Architecture 8-bit CISC
آپریٹنگ سپلائی وولٹیج 3.3 V or 5 V
پیکیج 48-pin LQFP, 7 mm × 7 mm
ماؤنٹنگ ٹائپ Surface mount
PWM/Flextimer Channels 8 channels
Hardware Dead-Time Insertion Supported
Analog Comparators Supported
Programmable Gain Amplifier Supported
Primary Application BLDC motor control

MC9S08MP16VLF 48-pin lqfp, 7 mm × 7 mm پن کنفیگریشن گائیڈ

MC9S08MP16VLF (48-pin lqfp, 7 mm × 7 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

MC9S08MP16VLF کے لیے 48-pin lqfp, 7 mm × 7 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MC9S08MP16VLF.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

MC9S08MP16VLF کے لیے موزوں ہے 6 ایپلیکیشنs: Entry-Level BLDC Motor Controller, Industrial Motor-Drive Control, Automotive Motor-Control Module, Cooling and Fan Controller, Low-Voltage Embedded Control, Cost-Sensitive Control Platform.

⚡

Entry-Level BLDC Motor Controller

The MC9S08MP16VLF fits an entry-level brushless DC motor controller because its 8-channel PWM/flextimer module provides dedicated switching resources and supports hardware dead-time insertion. This helps simplify complementary-switch timing that would otherwise require additional software or external circuitry. Analog comparators and a programmable gain amplifier can support current sensing and feedback conditioning close to the power stage. With 16 KB of Flash and an 8-bit CISC core, the device is best suited to compact controls with manageable protocol and diagnostic complexity rather than advanced connectivity or high-end motion algorithms.

🏭

Industrial Motor-Drive Control

The MC9S08MP16VLF can serve as the embedded controller in an industrial motor-drive module where deterministic PWM output, analog feedback, and economical flash-based firmware are priorities. The 51.34 MHz listed operating frequency supports responsive control-loop execution, while eight PWM channels and hardware dead-time insertion reduce dependence on software timing for complementary switching. Its 48-pin LQFP footprint provides more I/O than compact 20-pin and 32-pin MCUs, although designers must validate the exact multiplexed pin allocation, analog operating limits, and industrial temperature requirements before production release.

🚗

Automotive Motor-Control Module

The MC9S08MP16VLF is relevant to compact automotive motor-control modules because NXP identifies the S08MP16 as an economical solution for automotive and industrial BLDC applications. The eight-channel PWM/flextimer module, hardware dead-time insertion, analog comparators, and programmable gain amplifier suit motor feedback and power-stage control functions. Before adopting this exact MPN, verify its automotive qualification status, operating-temperature range, transient requirements, and lifecycle plan. Its end-of-life status makes long-term supply assurance especially important for new automotive production programs.

🔧

Cooling and Fan Controller

The MC9S08MP16VLF is suitable for a compact fan or cooling controller that requires multiple PWM outputs, speed feedback, and protection logic. The 8-channel PWM/flextimer block can allocate outputs to different fan or power-control stages, while hardware dead-time insertion is valuable where complementary stages are used. Analog comparators can monitor tachometer, current, or fault signals, and the programmable gain amplifier can condition low-level feedback. The 16 KB Flash capacity suits compact firmware, but timing, acoustic, and thermal behavior must be validated across the complete operating range.

🧩

Low-Voltage Embedded Control

The MC9S08MP16VLF can be used in small 3.3 V or 5 V embedded-control products that combine digital sequencing with analog feedback. Its 51.34 MHz listed clock and 16 KB Flash provide adequate headroom for compact control logic, while the 48-pin LQFP offers access to timers, communications, and general-purpose I/O. It is most appropriate when the application does not require a large code image, high-bandwidth networking, or a 32-bit processor. PCB design should include correct decoupling, defined unused-pin states, and a regulator design that respects the device-specific operating limits.

⚡

Cost-Sensitive Control Platform

The MC9S08MP16VLF supports cost-sensitive control platforms that need more than basic logic but can operate with an 8-bit processor and limited Flash. Its dedicated timer and analog resources may reduce the component count associated with external PWM generation and signal conditioning, while the 48-pin package permits broader peripheral access. The S08 architecture is appropriate for deterministic supervisory and motor-related tasks rather than connected-product middleware or complex user interfaces. A platform built around this MCU should include software abstraction for its motor-control peripherals and a documented migration path because the exact device is end of life.

What is the MC9S08MP16VLF?
The MC9S08MP16VLF is an NXP Semiconductors 8-bit S08 microcontroller rated at up to 51.34 MHz, with 16 KB of Flash memory and a 48-pin 7 mm × 7 mm LQFP package. The manufacturer describes the S08MP16 as a cost-effective motor-control platform with an 8-channel PWM/flextimer module, hardware dead-time insertion, analog comparators, and a programmable gain amplifier. These features make it particularly relevant to BLDC motor controllers and compact industrial or automotive embedded-control systems.
What are the key specifications of MC9S08MP16VLF that engineers should know?
The MC9S08MP16VLF combines an 8-bit CISC S08 core, 51.34 MHz maximum operating frequency, 16 KB (16K × 8) Flash memory, and a 48-pin LQFP (7 mm × 7 mm) package. It supports 3.3 V or 5 V operation and includes an 8-channel PWM/flextimer module with hardware dead-time insertion, analog comparators, and a programmable gain amplifier. According to the NXP MC9S08MP16 series datasheet, these resources target accurate and economical motor-control implementations.
Is the MC9S08MP16VLF suitable for BLDC motor control?
Yes, the MC9S08MP16VLF is specifically suited to entry-level BLDC motor-control designs. It combines eight PWM/flextimer channels, hardware dead-time insertion, analog comparators, and a programmable gain amplifier, allowing motor-drive feedback and switching functions to be handled by dedicated peripherals. The NXP product page identifies BLDC motor control as a principal use case, while its 16 KB Flash and 8-bit CISC architecture suit compact controls where an 8-bit MCU is sufficient.
Where can I download the MC9S08MP16VLF datasheet PDF?
The official MC9S08MP16 series datasheet can be downloaded from NXP at https://www.nxp.com/docs/en/data-sheet/MC9S08MP16.pdf. It contains the electrical characteristics, timing information, memory details, peripheral descriptions, and package information needed for schematic design and firmware planning. Use the MC9S08MP16 series document rather than relying on an individual distributor summary when assigning pins, selecting passives, or checking operating limits.
Where can I find the MC9S08MP16VLF pinout?
The MC9S08MP16VLF pin assignments and package drawing are found in the pinout and connection-diagram sections of the official NXP MC9S08MP16 series datasheet. The component uses a 48-pin LQFP package measuring 7 mm × 7 mm. When designing the PCB, follow that document for every multiplexed signal because functions such as PWM, serial communication, analog inputs, resets, and debug functions can be assigned to specific pins.
MC9S08MP16VLF vs MC9S08AW16CFGE — which is better for motor control?
The MC9S08MP16VLF is the stronger choice when the design specifically needs its documented 8-channel PWM/flextimer resource, hardware dead-time insertion, analog comparators, and programmable gain amplifier for BLDC control. A direct replacement decision cannot be made from the family name alone because the MC9S08AW16CFGE is a different S08 device variant. Verify its complete pinout, peripheral allocation, memory organization, voltage requirements, and package dimensions against the original design before substitution.
When should I choose MC9S08MP16VLF over another 8-bit MCU?
Choose the MC9S08MP16VLF when a compact motor-control design benefits from eight dedicated PWM/flextimer channels, hardware dead-time insertion, integrated analog comparison, and programmable gain. Its 16 KB Flash is sufficient for many entry-level controllers, but the 8-bit architecture and limited program memory make it less suitable for complex connectivity, extensive graphical interfaces, or safety-intensive processing. Select another MCU when protocol density, code size, ecosystem, or qualification requirements exceed those boundaries.
What can replace MC9S08MP16VLF?
A true drop-in replacement must use the same 48-pin LQFP footprint, preserve pin assignment, and provide compatible 3.3 V or 5 V operation, Flash capacity, clocking, and motor-control peripherals. No verified pin-compatible substitute for the MC9S08MP16VLF is identified in the available cross-reference records, so an unqualified replacement should not be assumed. A redesign using another MCU may be necessary, but that requires a new footprint, firmware review, and application-level validation.
Is MC9S08MP16VLF the same as MC9S08LG16CLF?
No. MC9S08MP16VLF and MC9S08LG16CLF are different NXP S08 MCU variants, and a shared 8-bit S08 core does not establish pin-to-pin compatibility. The MC9S08MP16VLF is specifically identified with 16 KB Flash, a 51.34 MHz listed frequency, eight PWM/flextimer channels, and a 48-pin LQFP package. Check the complete pinout and peripheral map for MC9S08LG16CLF before considering it as a substitution.
What is the best NXP equivalent for MC9S08MP16VLF?
The best direct equivalent is an NXP device only if it has an identical 48-pin pinout and compatible electrical, memory, clock, and motor-control characteristics. No such NXP replacement is confirmed in the available records, and other S08 families are not automatically interchangeable. Treat a redesign candidate as a functional alternative rather than a drop-in part until its package drawing, pin multiplexing, timing, memory map, and required PWM functions have been checked.
Where can I buy MC9S08MP16VLF online?
Use the Request a Quote form on this page to request MC9S08MP16VLF availability, current lead time, and order quantities. Because NXP lists the part as end of life, procurement should confirm remaining inventory, traceability, and any authorized lifecycle options before committing a new production order. The exact package and suffix must remain unchanged, because similar S08 part numbers may use different pinouts or memory configurations.
What is the price of MC9S08MP16VLF?
The current MC9S08MP16VLF commercial terms are available through the Request a Quote form on this page. Because the component is listed as end of life, the quote should confirm stock, traceability, minimum order quantity, and lead time rather than relying only on a historical unit figure. Buyers should also verify whether the offered MC9S08MP16VLF uses the original 48-pin LQFP package and exact manufacturer ordering suffix.
Is MC9S08MP16VLF in stock and what is its lead time?
Stock and lead time for the MC9S08MP16VLF should be confirmed through the Request a Quote form on this page. The manufacturer lists the device as end of life, so availability may depend on remaining factory inventory, authorized channels, and lot traceability. Do not treat a distributor result as a guaranteed allocation; request the exact MPN, package, quantity, and required shipping date with the quotation.
What design features should be checked for an MC9S08MP16VLF PCB?
Check the 48-pin LQFP footprint, power and ground distribution, decoupling, clock implementation, programming interface, and all required PWM and analog connections against the NXP MC9S08MP16 series datasheet. The device is an end-of-life part, so the board should also minimize dependence on undocumented pin multiplexing and avoid assumptions based on other S08 devices. Use the manufacturer package dimensions and pin description table as the controlling PCB-layout references.
Is MC9S08MP16VLF RoHS compliant and automotive qualified?
The MC9S08MP16VLF is described by NXP as intended for industrial and automotive applications, but that application positioning does not by itself establish AEC-Q100 qualification or RoHS status for this exact orderable MPN. Confirm the declarations for MC9S08MP16VLF on the manufacturer product page and current compliance documentation. Do not infer automotive qualification merely from the presence of an automotive-related use case in the product description.

کے لیے انجینئرنگ ریفرنس ڈیٹا MC9S08MP16VLF — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the MC9S08MP16VLF for compact BLDC motor-control products that need an 8-bit S08 core, 16 KB of Flash, eight PWM/flextimer channels, hardware dead-time insertion, analog comparators, and a programmable gain amplifier in a 48-pin LQFP. It is especially appropriate when the 51.34 MHz listed operating frequency is sufficient and minimizing external motor-control circuitry matters. Do not select it for designs requiring extensive connectivity, large application code, or a 32-bit processing architecture. MC9S08LG16CLF and MC9S08AW16CFGE should be treated as different variants rather than automatic replacements because the available information does not confirm identical pinouts or peripherals. Because MC9S08MP16VLF is listed as end of life, choose it primarily for controlled legacy support, qualified existing production, or carefully reviewed designs with a documented supply and migration plan.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Package 48-pin LQFP, 7 mm × 7 mm
Brand NXP Semiconductors
Processor Architecture 8-bit CISC S08
Maximum Frequency 51.34 MHz
Flash Memory 16 KB (16K × 8)
Operating Supply Voltage 3.3 V or 5 V
PWM/Flextimer Channels 8 channels
Motor-Control Features Hardware dead-time insertion, analog comparators, and programmable gain amplifier

اہم امتیازی خصوصیات

  • Integrated motor-control peripherals reduce external logic (بمقابلہMC9S08LG16CLF)
  • Higher listed clock rate supports responsive control execution (بمقابلہMC9S08AW16CFGE)
  • Dedicated PWM resources suit multi-channel motor designs (بمقابلہGeneric 8-bit MCU alternatives)

ڈیزائن نوٹس

Use the 48-pin LQFP drawing and pin-description table in the official NXP series datasheet as the controlling references for the PCB footprint. Place input and output decoupling close to the associated supply pins, preserve the required ground-return paths, and route sensitive analog inputs away from PWM and switching-node traces. Confirm every multiplexed function in the pin table because selecting a different S08 family member can change timer, communication, debug, and reset assignments even when memory size and package appear similar.

Design the 3.3 V or 5 V supply path around the operating range and current limits stated for the exact MC9S08MP16VLF configuration. Check the regulator's startup behavior against the MCU's reset requirements and account for voltage tolerance, transient response, and maximum input voltage. Place bulk and local high-frequency decoupling according to the manufacturer recommendations, and avoid routing high-current motor-return paths through sensitive analog ground areas of the controller board.

Do not treat the MC9S08LG16CLF, MC9S08AW16CFGE, or another S08-family MCU as interchangeable merely because it is an 8-bit part with 16 KB Flash. Compare package dimensions, pin names, alternate functions, timer channels, dead-time behavior, clocking, memory mapping, programming connections, and electrical limits. Since MC9S08MP16VLF is listed as end of life, also avoid creating a new design with undocumented alternatives unless the manufacturer confirms lifecycle availability and an engineering review approves the conversion.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The manufacturer product page identifies industrial and automotive applications, but the available product records do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for MC9S08MP16VLF. Confirm these declarations before release.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-15 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

MC9S08MP16VLF datasheet MC9S08MP16VLF pinout MC9S08MP16VLF datasheet pdf MC9S08MP16VLF specifications NXP MC9S08MP16VLF MC9S08MP16 51.34MHz microcontroller MC9S08MP16 48-LQFP pinout MC9S08MP16 BLDC motor control MC9S08MP16 equivalent MC9S08MP16 replacement MC9S08MP16VLF vs MC9S08LG16CLF MC9S08MP16VLF price MC9S08MP16VLF stock MC9S08MP16 application circuit

متعلقہ اجزاء اور اصطلاحات

NXP Semiconductors MC9S08MP16VLF MC9S08MP16 series S08MP16 8-bit microcontroller MCU S08 core CISC architecture Flash memory 16 KB Flash 51.34 MHz 48-pin LQFP LQFP package surface-mount technology BLDC motor control industrial motor control automotive electronics PWM Flextimer module hardware dead-time insertion analog comparator programmable gain amplifier 3.3 V operation 5 V operation end-of-life status
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں