MC9S08MP16VLF - 51.34MHz 16KB Flash S08 MCU | NXP
MPN: MC9S08MP16VLF ✗ End of LifeMC9S08MP16VLF Overview
An 8-bit microcontroller is a compact embedded processor designed to execute control, monitoring, and communication tasks with deterministic peripheral handling. The MC9S08MP16 belongs to the S08 family of 8-bit MCUs, combining processor logic with timers, communication interfaces, analog conversion functions, and I/O resources in one package. This integration allows a motor-control design to use fewer discrete components than a solution built from separate logic and analog components.
The MC9S08MP16VLF provides 16 KB (16K × 8) Flash program memory and operates at a listed frequency of 51.34 MHz. Its 8-channel PWM/flextimer module supports hardware dead-time insertion for motor-control applications, while analog comparators and a programmable gain amplifier support signal conditioning and feedback functions. The listed operating-voltage range is 3.3 V or 5 V, providing flexibility between industrial and automotive-style embedded systems.
The S08 architecture uses an 8-bit CISC-style instruction set and integrates peripherals closely with the processor core. For motor-control designs, the combination of hardware PWM, dead-time insertion, comparators, and programmable gain can reduce software timing dependence and simplify complementary-switch drive implementation. The 48-pin LQFP package also provides a higher pin count than compact 20-pin and 32-pin MCUs, increasing access to peripheral and I/O functions while maintaining a surface-mount assembly format.
Typical uses include entry-level brushless DC motor controllers, industrial motor drives, automotive accessories, cooling systems, and compact embedded-control products. The MC9S08MP16VLF is especially relevant where an 8-bit architecture, dedicated PWM channels, analog feedback, and 16 KB of Flash are sufficient without adopting a higher-cost 32-bit processor.
Designers should review the MC9S08MP16 series datasheet before assigning pins or designing the power system. In particular, confirm the detailed pin multiplexing, oscillator options, analog-reference requirements, and programming interface against the specific board revision. The device is listed as end of life, so new production designs should also account for availability and lifecycle risk during sourcing review.
This product record combines the manufacturer lifecycle status, distributor specifications, an official series datasheet, package information, and practical application guidance. It also distinguishes verified drop-in replacements from unrelated S08 devices, helping engineers evaluate direct replacement options without assuming that similar memory sizes or clock rates guarantee pin compatibility.
Drop-in alternatives for MC9S08MP16VLF — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
No drop-in alternatives available for this product.
Request AlternativesMC9S08MP16VLF Maximum Ratings & Electrical Characteristics
| Product Type | 8-bit S08 microcontroller |
| Maximum Clock Frequency | 51.34 MHz |
| Flash Memory | 16 KB (16K × 8) |
| Architecture | 8-bit CISC |
| Operating Supply Voltage | 3.3 V or 5 V |
| Package | 48-pin LQFP, 7 mm × 7 mm |
| Mounting Type | Surface mount |
| PWM/Flextimer Channels | 8 channels |
| Hardware Dead-Time Insertion | Supported |
| Analog Comparators | Supported |
| Programmable Gain Amplifier | Supported |
| Primary Application | BLDC motor control |
MC9S08MP16VLF 48-pin lqfp, 7 mm × 7 mm Pin Configuration Guide
Pin configuration for MC9S08MP16VLF (48-pin lqfp, 7 mm × 7 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for MC9S08MP16VLF.
Refer to the datasheet for full pin configuration.
Typical Applications
MC9S08MP16VLF is suitable for 6 applications: Entry-Level BLDC Motor Controller, Industrial Motor-Drive Control, Automotive Motor-Control Module, Cooling and Fan Controller, Low-Voltage Embedded Control, Cost-Sensitive Control Platform.
Entry-Level BLDC Motor Controller
The MC9S08MP16VLF fits an entry-level brushless DC motor controller because its 8-channel PWM/flextimer module provides dedicated switching resources and supports hardware dead-time insertion. This helps simplify complementary-switch timing that would otherwise require additional software or external circuitry. Analog comparators and a programmable gain amplifier can support current sensing and feedback conditioning close to the power stage. With 16 KB of Flash and an 8-bit CISC core, the device is best suited to compact controls with manageable protocol and diagnostic complexity rather than advanced connectivity or high-end motion algorithms.
Recommended
Industrial Motor-Drive Control
The MC9S08MP16VLF can serve as the embedded controller in an industrial motor-drive module where deterministic PWM output, analog feedback, and economical flash-based firmware are priorities. The 51.34 MHz listed operating frequency supports responsive control-loop execution, while eight PWM channels and hardware dead-time insertion reduce dependence on software timing for complementary switching. Its 48-pin LQFP footprint provides more I/O than compact 20-pin and 32-pin MCUs, although designers must validate the exact multiplexed pin allocation, analog operating limits, and industrial temperature requirements before production release.
Recommended
Automotive Motor-Control Module
The MC9S08MP16VLF is relevant to compact automotive motor-control modules because NXP identifies the S08MP16 as an economical solution for automotive and industrial BLDC applications. The eight-channel PWM/flextimer module, hardware dead-time insertion, analog comparators, and programmable gain amplifier suit motor feedback and power-stage control functions. Before adopting this exact MPN, verify its automotive qualification status, operating-temperature range, transient requirements, and lifecycle plan. Its end-of-life status makes long-term supply assurance especially important for new automotive production programs.
Recommended
Cooling and Fan Controller
The MC9S08MP16VLF is suitable for a compact fan or cooling controller that requires multiple PWM outputs, speed feedback, and protection logic. The 8-channel PWM/flextimer block can allocate outputs to different fan or power-control stages, while hardware dead-time insertion is valuable where complementary stages are used. Analog comparators can monitor tachometer, current, or fault signals, and the programmable gain amplifier can condition low-level feedback. The 16 KB Flash capacity suits compact firmware, but timing, acoustic, and thermal behavior must be validated across the complete operating range.
Recommended
Low-Voltage Embedded Control
The MC9S08MP16VLF can be used in small 3.3 V or 5 V embedded-control products that combine digital sequencing with analog feedback. Its 51.34 MHz listed clock and 16 KB Flash provide adequate headroom for compact control logic, while the 48-pin LQFP offers access to timers, communications, and general-purpose I/O. It is most appropriate when the application does not require a large code image, high-bandwidth networking, or a 32-bit processor. PCB design should include correct decoupling, defined unused-pin states, and a regulator design that respects the device-specific operating limits.
Recommended
Cost-Sensitive Control Platform
The MC9S08MP16VLF supports cost-sensitive control platforms that need more than basic logic but can operate with an 8-bit processor and limited Flash. Its dedicated timer and analog resources may reduce the component count associated with external PWM generation and signal conditioning, while the 48-pin package permits broader peripheral access. The S08 architecture is appropriate for deterministic supervisory and motor-related tasks rather than connected-product middleware or complex user interfaces. A platform built around this MCU should include software abstraction for its motor-control peripherals and a documented migration path because the exact device is end of life.
Recommended
Engineering reference data for MC9S08MP16VLF — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product |
|---|---|
| Package | 48-pin LQFP, 7 mm × 7 mm |
| Brand | NXP Semiconductors |
| Processor Architecture | 8-bit CISC S08 |
| Maximum Frequency | 51.34 MHz |
| Flash Memory | 16 KB (16K × 8) |
| Operating Supply Voltage | 3.3 V or 5 V |
| PWM/Flextimer Channels | 8 channels |
| Motor-Control Features | Hardware dead-time insertion, analog comparators, and programmable gain amplifier |
Key Differentiators
- Integrated motor-control peripherals reduce external logic (vs MC9S08LG16CLF)
- Higher listed clock rate supports responsive control execution (vs MC9S08AW16CFGE)
- Dedicated PWM resources suit multi-channel motor designs (vs Generic 8-bit MCU alternatives)
Design Notes
Use the 48-pin LQFP drawing and pin-description table in the official NXP series datasheet as the controlling references for the PCB footprint. Place input and output decoupling close to the associated supply pins, preserve the required ground-return paths, and route sensitive analog inputs away from PWM and switching-node traces. Confirm every multiplexed function in the pin table because selecting a different S08 family member can change timer, communication, debug, and reset assignments even when memory size and package appear similar.
Design the 3.3 V or 5 V supply path around the operating range and current limits stated for the exact MC9S08MP16VLF configuration. Check the regulator's startup behavior against the MCU's reset requirements and account for voltage tolerance, transient response, and maximum input voltage. Place bulk and local high-frequency decoupling according to the manufacturer recommendations, and avoid routing high-current motor-return paths through sensitive analog ground areas of the controller board.
Do not treat the MC9S08LG16CLF, MC9S08AW16CFGE, or another S08-family MCU as interchangeable merely because it is an 8-bit part with 16 KB Flash. Compare package dimensions, pin names, alternate functions, timer channels, dead-time behavior, clocking, memory mapping, programming connections, and electrical limits. Since MC9S08MP16VLF is listed as end of life, also avoid creating a new design with undocumented alternatives unless the manufacturer confirms lifecycle availability and an engineering review approves the conversion.
Compliance Information
The manufacturer product page identifies industrial and automotive applications, but the available product records do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for MC9S08MP16VLF. Confirm these declarations before release.