MCP6024-I/ST - 10MHz Quad Rail-to-Rail Op Amp | Microchip
MPN: MCP6024-I/ST ✓ فعالMCP6024-I/ST جائزہ
An operational amplifier is an active analog component that compares two input voltages and drives its output to amplify the difference between them. Quad operational amplifiers combine four amplifier channels in one package, supporting complete analog front ends, active filters, sensor conditioning, and general-purpose signal processing. This device belongs to the CMOS operational amplifier hierarchy and is designed for low-power, high-input-impedance signal paths.
The MCP6024-I/ST provides 10 MHz gain-bandwidth product, low noise of 8.7 nV/√Hz, and low distortion of 0.00053% THD+N. Its rail-to-rail input and output behavior supports operation near the supply rails, while the 1.0 mA typical operating current helps limit power consumption. The quad configuration reduces component count and PCB area in designs requiring four amplifier channels.
Advanced CMOS construction gives the amplifier low input bias current, high open-loop gain, and high-speed operation. Rail-to-rail inputs are useful when signals approach either supply rail, and the rail-to-rail output stage increases usable output range. These characteristics make the device suitable for portable instrumentation, sensor interfaces, active filtering, audio signal conditioning, and industrial control systems operating from a 2.5 V to 5.5 V supply.
Typical uses include amplifying low-level sensor signals, implementing active low-pass and band-pass filters, buffering ADC inputs, driving low-capacitance analog stages, and providing four independent gain stages on one board. The low operating current benefits battery-powered equipment, while the 10 MHz bandwidth provides adequate response for many precision and general-purpose analog applications.
When laying out the circuit, place input and output components close to their associated pins and provide a stable bypass capacitor near the power terminal. Avoid long feedback traces, maintain symmetry between amplifier channels, and check the required output swing, load, and stability under the actual operating conditions.
This product data combines the manufacturer specifications with engineering-focused design guidance, application analysis, and verified same-package alternatives. The comparison information helps engineers distinguish temperature-grade and packaging choices without confusing functionally similar parts with true pin-to-pin replacements.
کے لیے ڈراپ اِن متبادل MCP6024-I/ST — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MCP6024-I/ST (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Amplifier Type, Package, Input Bias Current, Number of Channels, RoHS Status.
MCP6024-E/ST
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MCP6024T-I/ST
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MCP6024T-E/ST
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MCP6024-I/ST زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Amplifier Type | Quad general-purpose operational amplifier |
| Number of Channels | 4 channels |
| Gain-Bandwidth Product | 10 MHz |
| Typical Operating Current | 1.0 mA |
| Typical Input Offset Voltage | Less than 0.5 mV |
| Input Noise Density | 8.7 nV/√Hz |
| Total Harmonic Distortion plus Noise | 0.00053% THD+N |
| Supply Voltage Range | 2.5 V to 5.5 V |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Technology | Advanced CMOS |
| Open-Loop Gain | High open-loop gain |
| Input Bias Current | Low bias current |
| پیکیج | 14-pin TSSOP |
| Shipping Package | Tube |
| Automotive Qualification | AEC-Q100 |
MCP6024-I/ST پن کنفیگریشن
| پن 1 | OUTA — Amplifier A output |
| پن 2 | IN-A- — Amplifier A inverting input |
| پن 3 | IN-A+ — Amplifier A non-inverting input |
| پن 4 | V+ — Positive power supply |
| پن 5 | INB+ — Amplifier B non-inverting input |
| پن 6 | INB- — Amplifier B inverting input |
| پن 7 | OUTB — Amplifier B output |
| پن 8 | OUTC — Amplifier C output |
| پن 9 | INC- — Amplifier C inverting input |
| پن 10 | INC+ — Amplifier C non-inverting input |
| پن 11 | V- — Negative power supply or ground |
| پن 12 | OUTD — Amplifier D output |
| پن 13 | IND+ — Amplifier D non-inverting input |
| پن 14 | IND- — Amplifier D inverting input |
عام استعمالات
MCP6024-I/ST کے لیے موزوں ہے 6 ایپلیکیشنs: Low-Voltage Sensor Signal Conditioning, Active Filters and Frequency Shaping, Portable Measurement and Test Equipment, Audio and Communication Buffering, Industrial Control Signal Conditioning, Automotive and Vehicle Electronics.
Low-Voltage Sensor Signal Conditioning
The MCP6024-I/ST fits four-channel sensor interfaces because its rail-to-rail input stage accepts signals near the 2.5 V to 5.5 V supply limits, while its less-than-0.5 mV typical input offset helps preserve small sensor signals. Each channel can provide voltage amplification, differential conversion, or level conditioning without adding separate amplifier packages. The 8.7 nV/√Hz input noise is suitable for moderate-resolution measurements, and the 1.0 mA typical operating current keeps channel count from becoming the dominant power load. Check the source impedance and bias-current requirements before adding large feedback resistors.
تجویز کردہ
Active Filters and Frequency Shaping
The MCP6024-I/ST is well suited to active low-pass, high-pass, and band-pass filter implementations because each of its four channels has a 10 MHz gain-bandwidth product. In a typical multiple-feedback or Sallen-Key topology, the amplifier bandwidth should be selected relative to the highest filter frequency so that phase and gain do not distort the intended response. Rail-to-rail output capability increases headroom in low-voltage filters, while the quad package simplifies matched channel implementation. Validate stability, component tolerances, and maximum output swing using the manufacturer's recommended operating region.
تجویز کردہ
Portable Measurement and Test Equipment
The MCP6024-I/ST supports compact measurement instruments where four buffered channels, low offset, and low power are more important than very high bandwidth. Its 1.0 mA typical operating current is useful in handheld probes, data loggers, and portable test equipment, while the less-than-0.5 mV typical offset minimizes systematic error around zero. Four rail-to-rail input and output channels can condition sensor, reference, or trigger signals. For precision measurement, check offset and drift at the required temperature, account for input bias current with source impedances, and keep sensitive analog traces away from switching nodes.
تجویز کردہ
Audio and Communication Buffering
The MCP6024-I/ST can buffer low-level audio or communication signals because its 0.00053% THD+N figure supports low-distortion amplification and its 10 MHz gain-bandwidth product covers many general-purpose audio paths. The quad configuration allows buffering, gain, filtering, and mixing to be implemented on a compact board. Rail-to-rail inputs and outputs provide useful signal range in 2.5 V to 5.5 V systems. Keep input and feedback connections short, use stable resistor and capacitor values, and confirm capacitive-load stability before driving long cables or downstream switching stages.
تجویز کردہ
Industrial Control Signal Conditioning
The MCP6024-I/ST fits industrial control boards that must condition multiple low-voltage control or sensor signals with limited power. The industrial-temperature MCP6024-I/ST combines four channels, a 10 MHz gain-bandwidth product, and a 1.0 mA typical operating current in a compact 14-pin TSSOP. Rail-to-rail operation provides useful signal headroom in 2.5 V to 5.5 V systems. Designers should still verify the complete operating-temperature requirement, transient environment, grounding strategy, and output drive against the specific controller or sensor before production release.
تجویز کردہ
Automotive and Vehicle Electronics
The MCP6024-I/ST is identified as an AEC-Q100-qualified automotive quad operational amplifier, making it appropriate for low-voltage vehicle signal-conditioning stages where four channels are required. Its 5.5 V maximum supply and rail-to-rail input and output behavior support sensors and control signals operating near the available rail range. The 1.0 mA typical operating current supports low-power auxiliary subsystems, while the 10 MHz gain-bandwidth product handles general-purpose analog functions. Validate transient immunity, grounding, noise margins, and diagnostic requirements within the complete automotive electronics architecture.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MCP6024-I/ST — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | MCP6024-E/ST | MCP6024T-I/ST | MCP6024T-E/ST |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 14-pin TSSOP | 14-pin TSSOP - same | 14-pin TSSOP - same | 14-pin TSSOP - same |
| Amplifier Channels | 4 channels | 4 channels | 4 channels | 4 channels |
| Gain-Bandwidth Product | 10 MHz | 10 MHz | 10 MHz | 10 MHz |
| Typical Operating Current | 1.0 mA | 1.0 mA | 1.0 mA | 1.0 mA |
| Typical Input Offset Voltage | Less than 0.5 mV | Less than 0.5 mV | Less than 0.5 mV | Less than 0.5 mV |
| Supply Voltage Range | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V |
| Input and Output Operation | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Temperature Grade | Industrial | Extended | Industrial | Extended |
| Shipping Format | Tube | Tube | Tape and reel | Tape and reel |
اہم امتیازی خصوصیات
- Four integrated amplifier channels in a compact package (بمقابلہMCP6024-E/ST)
- Low-power 10 MHz CMOS performance (بمقابلہMCP6024-E/ST)
- Rail-to-rail signal handling for low-voltage systems (بمقابلہMCP6024T-I/ST)
ڈیزائن نوٹس
Place the power-bypass capacitor close to the V+ and V- pins, and connect the ground return directly to the device ground pin. Keep amplifier input and feedback traces short and away from high-current switching nodes. For high-impedance sources, minimize leakage from adjacent pins and board contamination because even low-bias-current CMOS amplifiers can be affected by very high source impedances.
Design each amplifier stage for the required closed-loop bandwidth rather than assuming the full 10 MHz gain-bandwidth product is available at every gain setting. Account for the selected feedback network, capacitive loading, output-swing limits, and noise-gain stability. Confirm stability with the final load because driving cables, ADC inputs, or other capacitive nodes can alter the amplifier response.
Do not treat rail-to-rail input or output as an unlimited range. Verify common-mode and output limits across supply voltage, temperature, and load current. Likewise, confirm that the target system requires the industrial temperature grade of MCP6024-I/ST rather than the extended grade offered by MCP6024-E/ST. Review offset, bias current, input capacitance, and output settling before replacing it in a precision analog circuit.
تعمیل کی معلومات
The product listing identifies MCP6024-I/ST as an automotive AEC-Q100 part. Other compliance attributes are not confirmed by the available manufacturer and distributor product information.