Microchip Technology

MCP6024-I/ST - 10MHz Quad Rail-to-Rail Op Amp | Microchip

N.º de pieza: MCP6024-I/ST ✓ Activo
Less than 0.5 mV Vdss 1.0 mA Id 14-pin TSSOP Package
MOQ: 1 |

MCP6024-I/ST Descripción general

The Microchip Technology MCP6024-I/ST is a quad, rail-to-rail input and output CMOS operational amplifier with a 10 MHz gain-bandwidth product, 1.0 mA typical operating current, and less than 0.5 mV typical input offset voltage. The device is supplied in a 14-pin TSSOP package, allowing four amplifiers to be integrated into compact analog signal-conditioning boards.

An operational amplifier is an active analog component that compares two input voltages and drives its output to amplify the difference between them. Quad operational amplifiers combine four amplifier channels in one package, supporting complete analog front ends, active filters, sensor conditioning, and general-purpose signal processing. This device belongs to the CMOS operational amplifier hierarchy and is designed for low-power, high-input-impedance signal paths.

The MCP6024-I/ST provides 10 MHz gain-bandwidth product, low noise of 8.7 nV/√Hz, and low distortion of 0.00053% THD+N. Its rail-to-rail input and output behavior supports operation near the supply rails, while the 1.0 mA typical operating current helps limit power consumption. The quad configuration reduces component count and PCB area in designs requiring four amplifier channels.

Advanced CMOS construction gives the amplifier low input bias current, high open-loop gain, and high-speed operation. Rail-to-rail inputs are useful when signals approach either supply rail, and the rail-to-rail output stage increases usable output range. These characteristics make the device suitable for portable instrumentation, sensor interfaces, active filtering, audio signal conditioning, and industrial control systems operating from a 2.5 V to 5.5 V supply.

Typical uses include amplifying low-level sensor signals, implementing active low-pass and band-pass filters, buffering ADC inputs, driving low-capacitance analog stages, and providing four independent gain stages on one board. The low operating current benefits battery-powered equipment, while the 10 MHz bandwidth provides adequate response for many precision and general-purpose analog applications.

When laying out the circuit, place input and output components close to their associated pins and provide a stable bypass capacitor near the power terminal. Avoid long feedback traces, maintain symmetry between amplifier channels, and check the required output swing, load, and stability under the actual operating conditions.

This product data combines the manufacturer specifications with engineering-focused design guidance, application analysis, and verified same-package alternatives. The comparison information helps engineers distinguish temperature-grade and packaging choices without confusing functionally similar parts with true pin-to-pin replacements.

Alternativas directas para MCP6024-I/ST — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MCP6024-I/ST (mismo factor de forma y huella) — difiere en Amplifier Type, Package, Input Bias Current, Number of Channels, RoHS Status.

Microchip Technology
Amplifier Type: Single operational amplifier
Package: 8-pin TSSOP
Input Bias Current: 1 pA
Microchip Technology
Amplifier Type: General Purpose, CMOS, RRIO
Package: 14-pin TSSOP (ST)
Number of Channels: 4 (Quad)

MCP6024-E/ST

✅ Sustitución directa
📦 14-pin TSSOP
Uses the extended temperature grade instead of the industrial temperature grade; core gain-bandwidth product remains 10 MHz and amplifier count remains four.

📋 Alternativa de referencia (no en el catálogo)

MCP6024T-I/ST

✅ Sustitución directa
Microchip Technology
📦 14-pin TSSOP
4 (Quad) · General Purpose, CMOS, RRIO · 10 MHz · 7 V/us · 2.5 V to 5.5 V · 1.0 mA (typical) · <0.5 mV (typical)

Consulte el precio

Ver hoja de datos →

MCP6024T-E/ST

✅ Sustitución directa
📦 14-pin TSSOP
Combines the extended temperature grade with tape-and-reel packaging; gain-bandwidth product remains 10 MHz and the package remains 14-pin TSSOP.

📋 Alternativa de referencia (no en el catálogo)

MCP6024-I/ST Valores máximos y características eléctricas

Amplifier Type Quad general-purpose operational amplifier
Number of Channels 4 channels
Gain-Bandwidth Product 10 MHz
Typical Operating Current 1.0 mA
Typical Input Offset Voltage Less than 0.5 mV
Input Noise Density 8.7 nV/√Hz
Total Harmonic Distortion plus Noise 0.00053% THD+N
Supply Voltage Range 2.5 V to 5.5 V
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Technology Advanced CMOS
Open-Loop Gain High open-loop gain
Input Bias Current Low bias current
Encapsulado 14-pin TSSOP
Shipping Package Tube
Automotive Qualification AEC-Q100

Configuración de pines de MCP6024-I/ST

TSSOP-14 (4.4mm) Package Pinout Diagram TSSOP-14 4.4x5mm, P0.65mm, JEDEC MO-153. 14-pin thin shrink. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 TSSOP-14 (4.4mm)
Pin 1 OUTA — Amplifier A output
Pin 2 IN-A- — Amplifier A inverting input
Pin 3 IN-A+ — Amplifier A non-inverting input
Pin 4 V+ — Positive power supply
Pin 5 INB+ — Amplifier B non-inverting input
Pin 6 INB- — Amplifier B inverting input
Pin 7 OUTB — Amplifier B output
Pin 8 OUTC — Amplifier C output
Pin 9 INC- — Amplifier C inverting input
Pin 10 INC+ — Amplifier C non-inverting input
Pin 11 V- — Negative power supply or ground
Pin 12 OUTD — Amplifier D output
Pin 13 IND+ — Amplifier D non-inverting input
Pin 14 IND- — Amplifier D inverting input

Aplicaciones típicas

MCP6024-I/ST es adecuado para 6 aplicacións: Low-Voltage Sensor Signal Conditioning, Active Filters and Frequency Shaping, Portable Measurement and Test Equipment, Audio and Communication Buffering, Industrial Control Signal Conditioning, Automotive and Vehicle Electronics.

🧩

Low-Voltage Sensor Signal Conditioning

The MCP6024-I/ST fits four-channel sensor interfaces because its rail-to-rail input stage accepts signals near the 2.5 V to 5.5 V supply limits, while its less-than-0.5 mV typical input offset helps preserve small sensor signals. Each channel can provide voltage amplification, differential conversion, or level conditioning without adding separate amplifier packages. The 8.7 nV/√Hz input noise is suitable for moderate-resolution measurements, and the 1.0 mA typical operating current keeps channel count from becoming the dominant power load. Check the source impedance and bias-current requirements before adding large feedback resistors.

🌐

Active Filters and Frequency Shaping

The MCP6024-I/ST is well suited to active low-pass, high-pass, and band-pass filter implementations because each of its four channels has a 10 MHz gain-bandwidth product. In a typical multiple-feedback or Sallen-Key topology, the amplifier bandwidth should be selected relative to the highest filter frequency so that phase and gain do not distort the intended response. Rail-to-rail output capability increases headroom in low-voltage filters, while the quad package simplifies matched channel implementation. Validate stability, component tolerances, and maximum output swing using the manufacturer's recommended operating region.

🖥️

Portable Measurement and Test Equipment

The MCP6024-I/ST supports compact measurement instruments where four buffered channels, low offset, and low power are more important than very high bandwidth. Its 1.0 mA typical operating current is useful in handheld probes, data loggers, and portable test equipment, while the less-than-0.5 mV typical offset minimizes systematic error around zero. Four rail-to-rail input and output channels can condition sensor, reference, or trigger signals. For precision measurement, check offset and drift at the required temperature, account for input bias current with source impedances, and keep sensitive analog traces away from switching nodes.

🎧

Audio and Communication Buffering

The MCP6024-I/ST can buffer low-level audio or communication signals because its 0.00053% THD+N figure supports low-distortion amplification and its 10 MHz gain-bandwidth product covers many general-purpose audio paths. The quad configuration allows buffering, gain, filtering, and mixing to be implemented on a compact board. Rail-to-rail inputs and outputs provide useful signal range in 2.5 V to 5.5 V systems. Keep input and feedback connections short, use stable resistor and capacitor values, and confirm capacitive-load stability before driving long cables or downstream switching stages.

🏭

Industrial Control Signal Conditioning

The MCP6024-I/ST fits industrial control boards that must condition multiple low-voltage control or sensor signals with limited power. The industrial-temperature MCP6024-I/ST combines four channels, a 10 MHz gain-bandwidth product, and a 1.0 mA typical operating current in a compact 14-pin TSSOP. Rail-to-rail operation provides useful signal headroom in 2.5 V to 5.5 V systems. Designers should still verify the complete operating-temperature requirement, transient environment, grounding strategy, and output drive against the specific controller or sensor before production release.

🚗

Automotive and Vehicle Electronics

The MCP6024-I/ST is identified as an AEC-Q100-qualified automotive quad operational amplifier, making it appropriate for low-voltage vehicle signal-conditioning stages where four channels are required. Its 5.5 V maximum supply and rail-to-rail input and output behavior support sensors and control signals operating near the available rail range. The 1.0 mA typical operating current supports low-power auxiliary subsystems, while the 10 MHz gain-bandwidth product handles general-purpose analog functions. Validate transient immunity, grounding, noise margins, and diagnostic requirements within the complete automotive electronics architecture.

What are the key specifications of MCP6024-I/ST that engineers should know?
The MCP6024-I/ST is a quad CMOS operational amplifier with a 10 MHz gain-bandwidth product, 1.0 mA typical operating current, less than 0.5 mV typical input offset voltage, and 8.7 nV/√Hz input noise. According to the Microchip manufacturer datasheet, it also provides rail-to-rail input and output operation from a 2.5 V to 5.5 V supply. Four amplifiers are integrated into a 14-pin TSSOP package for compact analog signal-conditioning designs.
Where can I download the MCP6024-I/ST datasheet PDF?
The MCP6024-I/ST datasheet PDF can be downloaded from the Microchip MCP6024 product page or through the datasheet listing on the product page. The manufacturer documentation describes a 28-page document covering the MCP6021, MCP6022, MCP6023, and MCP6024 family. Use the ordering information and pin-description tables to confirm the 14-pin TSSOP connections before laying out or modifying a PCB.
Where can I find the MCP6024-I/ST pinout?
The MCP6024-I/ST pinout is shown in the pin-description table of the Microchip manufacturer datasheet. The 14-pin TSSOP contains four complete amplifier channels, with non-inverting, inverting, and output pins for each channel plus power and ground connections. Use that table when assigning PCB nets because channel order and power-pin locations must follow the package drawing exactly.
Is MCP6024-I/ST a rail-to-rail input and output op amp?
Yes, the MCP6024-I/ST has rail-to-rail input and output operation. According to the Microchip manufacturer datasheet, the rail-to-rail input stage accepts signals approaching the supply limits, while the output stage can swing close to the rails under suitable load conditions. This expands the usable signal range in low-voltage sensor, filtering, and buffering circuits compared with a conventional amplifier that requires additional input or output headroom.
What is the gain-bandwidth product of MCP6024-I/ST?
The MCP6024-I/ST has a 10 MHz gain-bandwidth product. According to the Microchip manufacturer datasheet, this bandwidth supports general-purpose high-speed signal conditioning while the device operates from 2.5 V to 5.5 V. Closed-loop bandwidth depends on the selected noise-gain configuration, so a 10 MHz gain-bandwidth product does not mean that every feedback network produces 10 MHz of closed-loop bandwidth.
What is the operating current of MCP6024-I/ST?
The MCP6024-I/ST has a typical operating current of 1.0 mA. The Microchip manufacturer product page identifies this value for the quad MCP6024 family, making the device suitable for low-power portable systems and distributed sensor interfaces. Account for the operating current of all four internal channels and confirm the complete circuit's load current during battery-life calculations.
What can replace MCP6024-I/ST?
The MCP6024-E/ST is the closest confirmed same-package replacement for the MCP6024-I/ST because it retains the quad, 10 MHz, 14-pin TSSOP configuration while changing the temperature grade. Confirm the required industrial temperature range, supply limits, offset limits, and AEC-Q100 qualification against the manufacturer datasheet before substitution. No unqualified cross-brand drop-in replacement is established by the available cross-reference information.
Is MCP6024-I/ST the same as MCP6024-E/ST?
The MCP6024-I/ST and MCP6024-E/ST are electrically similar quad rail-to-rail operational amplifiers in the same 14-pin TSSOP family, but their temperature grades differ. The MCP6024-I/ST carries the industrial temperature designation, while the MCP6024-E/ST carries the extended temperature designation. The exact limits and automotive qualification requirements should be checked in the Microchip manufacturer datasheet before production substitution.
MCP6024-I/ST vs MCP6024-E/ST — which is better for industrial equipment?
Choose the MCP6024-I/ST for equipment requiring the industrial temperature grade and choose the MCP6024-E/ST when the design requires the extended temperature grade. Both devices use the same 14-pin TSSOP architecture and provide a 10 MHz gain-bandwidth product with rail-to-rail inputs and outputs. The decisive factor is the required ambient temperature range and qualification requirement, rather than the shared core amplifier functions.
When should I choose MCP6024-I/ST instead of another quad op amp?
Choose the MCP6024-I/ST when a design needs four amplifier channels, a 10 MHz gain-bandwidth product, rail-to-rail input and output behavior, and low 1.0 mA typical operating current in a 14-pin TSSOP package. It is especially useful for compact sensor-conditioning and filtering assemblies requiring multiple analog channels. Select another amplifier if the design requires substantially wider supply voltage, lower offset, different noise performance, or a different package.
Is MCP6024-I/ST suitable for low-voltage sensor interfaces?
Yes, the MCP6024-I/ST is suitable for low-voltage sensor interfaces because it operates from 2.5 V to 5.5 V and accepts input signals near the supply rails. Its less-than-0.5 mV typical input offset, 8.7 nV/√Hz noise density, and four-channel package support accurate conditioning of multiple sensor outputs. Check input bias current and common-mode limits against the particular sensor impedance before finalizing the bias-resistor network.
What is the best Microchip equivalent for MCP6024-I/ST?
The MCP6024-E/ST is a confirmed same-package Microchip alternative when the design can use the extended temperature grade. The MCP6024T-I/ST and MCP6024T-E/ST provide corresponding tape-and-reel order options while retaining the 14-pin TSSOP electrical configuration. Treat reel codes as purchasing variants rather than distinct performance alternatives, and verify temperature, traceability, and qualification requirements before changing the BOM.
What is the best cross-brand equivalent for MCP6024-I/ST?
No specific cross-brand drop-in replacement is confirmed for the MCP6024-I/ST by the available cross-reference information. A valid cross-brand candidate would require the same 14-pin TSSOP footprint, four amplifier channels, compatible power and ground pins, rail-to-rail behavior, and closely matched bandwidth and offset characteristics. Until those requirements are verified at the component level, use the documented same-package Microchip options or perform a complete analog compatibility review.
Where can I buy MCP6024-I/ST online?
Use the Request a Quote form on this page to request MCP6024-I/ST availability, current unit pricing, minimum order quantity, and lead time. The request should identify the exact MPN MCP6024-I/ST and, where necessary, the desired shipment quantity. The manufacturer lists the device as an automotive AEC-Q100 quad rail-to-rail operational amplifier in a 14-pin TSSOP package.
What is the price and lead time for MCP6024-I/ST?
Request the current MCP6024-I/ST price, stock status, minimum order quantity, and lead time through the Request a Quote form on this page. Quote-based ordering allows the exact 14-pin TSSOP order code and required quantity to be confirmed. This is the appropriate method for production planning because component availability and delivery schedules can change independently of the device's technical specifications.
Is MCP6024-I/ST AEC-Q100 qualified?
The MCP6024-I/ST is identified as an automotive AEC-Q100 quad rail-to-rail operational amplifier. According to the manufacturer and distributor product information for this order code, the device is available as a 5.5 V, 14-pin TSSOP automotive part. AEC-Q100 qualification addresses automotive device reliability, but the production design must still comply with the applicable quality-system and traceability requirements.

Datos de referencia de ingeniería para MCP6024-I/ST — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose MCP6024-I/ST for a compact, low-power analog design that requires four rail-to-rail amplifier channels, a 10 MHz gain-bandwidth product, and the industrial temperature grade in a 14-pin TSSOP package. It is particularly suitable for low-voltage sensor interfaces, active filters, buffering, and general industrial signal conditioning. Choose MCP6024-E/ST when the circuit requires the extended temperature grade while retaining the same electrical and package configuration. Use MCP6024T-I/ST or MCP6024T-E/ST when tape-and-reel production packaging is preferred. Do not substitute these parts without checking offset limits, temperature range, input and output characteristics, load stability, and AEC-Q100 requirements. No cross-brand drop-in alternative is confirmed without a separate component-level compatibility review.

Comparación con alternativas

Parámetro Este producto MCP6024-E/ST MCP6024T-I/ST MCP6024T-E/ST
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 14-pin TSSOP 14-pin TSSOP - same 14-pin TSSOP - same 14-pin TSSOP - same
Amplifier Channels 4 channels 4 channels 4 channels 4 channels
Gain-Bandwidth Product 10 MHz 10 MHz 10 MHz 10 MHz
Typical Operating Current 1.0 mA 1.0 mA 1.0 mA 1.0 mA
Typical Input Offset Voltage Less than 0.5 mV Less than 0.5 mV Less than 0.5 mV Less than 0.5 mV
Supply Voltage Range 2.5 V to 5.5 V 2.5 V to 5.5 V 2.5 V to 5.5 V 2.5 V to 5.5 V
Input and Output Operation Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Temperature Grade Industrial Extended Industrial Extended
Shipping Format Tube Tube Tape and reel Tape and reel

Diferenciadores clave

  • Four integrated amplifier channels in a compact package (frente a MCP6024-E/ST)
  • Low-power 10 MHz CMOS performance (frente a MCP6024-E/ST)
  • Rail-to-rail signal handling for low-voltage systems (frente a MCP6024T-I/ST)

Notas de diseño

Place the power-bypass capacitor close to the V+ and V- pins, and connect the ground return directly to the device ground pin. Keep amplifier input and feedback traces short and away from high-current switching nodes. For high-impedance sources, minimize leakage from adjacent pins and board contamination because even low-bias-current CMOS amplifiers can be affected by very high source impedances.

Design each amplifier stage for the required closed-loop bandwidth rather than assuming the full 10 MHz gain-bandwidth product is available at every gain setting. Account for the selected feedback network, capacitive loading, output-swing limits, and noise-gain stability. Confirm stability with the final load because driving cables, ADC inputs, or other capacitive nodes can alter the amplifier response.

Do not treat rail-to-rail input or output as an unlimited range. Verify common-mode and output limits across supply voltage, temperature, and load current. Likewise, confirm that the target system requires the industrial temperature grade of MCP6024-I/ST rather than the extended grade offered by MCP6024-E/ST. Review offset, bias current, input capacitance, and output settling before replacing it in a precision analog circuit.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The product listing identifies MCP6024-I/ST as an automotive AEC-Q100 part. Other compliance attributes are not confirmed by the available manufacturer and distributor product information.

Datos verificados el: 2026-11-20 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

mcp6024 datasheet mcp6024 datasheet pdf mcp6024 price mcp6024 buy mcp6024 op amp mcp6024 equivalent MCP6024-I/ST pinout MCP6024-I/ST replacement MCP6024-I/ST vs MCP6024-E/ST MCP6024 10MHz op amp MCP6024 TSSOP-14 amplifier MCP6024 sensor signal conditioning

Componentes & términos relacionados

Microchip Technology MCP6024-I/ST MCP6024 MCP6024-E/ST MCP6024T-I/ST MCP6024T-E/ST quad operational amplifier CMOS operational amplifier analog integrated circuit amplifier IC rail-to-rail input rail-to-rail output gain-bandwidth product input offset voltage input noise density THD+N 14-pin TSSOP TSSOP package family surface-mount package active filter sensor signal conditioning industrial control automotive electronics AEC-Q100 low-power design
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ