Texas Instruments

MSP430F1612IPM - 8MHz 16-Bit Mixed-Signal MCU | Texas Instruments

MPN: MSP430F1612IPM ✓ فعال
64-LQFP (10 x 10 mm) Package 8 MHz Speed 55 KB (55K x 8 + 256 bytes) Memory
MOQ: 1 |

MSP430F1612IPM جائزہ

Texas Instruments MSP430F1612IPM is an ultra-low-power 16-bit mixed-signal microcontroller operating at 8 MHz, with 55 KB of Flash memory, 5 KB of SRAM, and a 64-LQFP 10 x 10 mm package. Its integrated mixed-signal resources include a 12-bit ADC, two 12-bit DACs, and a comparator. The MCU also provides DMA, I2C, SPI, and UART interfaces for connected industrial, measurement, and portable designs.

An MSP430 microcontroller is a reduced-instruction-set computer designed for embedded control, measurement, and battery-powered applications. The MSP430 architecture combines a 16-bit RISC CPU, 16-bit registers, and constant generators with five low-power operating modes. It belongs to the MCU hierarchy as a mixed-signal microcontroller, combining digital control, data conversion, communications, and direct memory access in one device.

The principal features of the MSP430F1612IPM include its 8 MHz operating clock, 55 KB Flash program memory plus 256 bytes, 5 KB SRAM, and comprehensive peripheral integration. The 12-bit ADC supports analog measurements, while the dual 12-bit DACs provide two independently controlled analog outputs. A comparator supports threshold and signal-conditioning functions, and DMA reduces CPU intervention during data transfers.

The device's 16-bit RISC CPU uses a reduced instruction set to improve code efficiency in control-loop and acquisition systems. Programmable peripherals include I2C, SPI, and UART interfaces, allowing the MCU to connect sensors, external converters, displays, and communications equipment. The integrated DMA controller is especially useful when acquiring or transferring multiple ADC samples while the CPU performs filtering, state-machine updates, or communications.

Typical uses include portable measurement instruments, industrial data-acquisition systems, sensor interfaces, low-power embedded controllers, and mixed-signal instrumentation. Its combination of two DAC channels, a 12-bit ADC, and serial interfaces supports closed-loop measurement systems where analog control and digital data handling must share one controller. The low-power architecture is particularly valuable in portable equipment where duty-cycled operation extends battery life.

PCB design should preserve clean separation between analog and digital circuitry, place decoupling capacitors close to the supply pins, and route high-impedance analog inputs away from switching nodes. Firmware should configure unused pins and peripheral inputs appropriately, exercise the low-power modes only after settling timeouts, and verify ADC and DAC accuracy across the intended reference and temperature ranges.

This page combines the manufacturer's device characteristics with practical selection guidance, pin-compatible replacement information, comparison criteria, and design considerations for engineers evaluating the MSP430F1612IPM in low-power mixed-signal systems.

کے لیے ڈراپ اِن متبادل MSP430F1612IPM — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MSP430F1612IPM (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف ADC Resolution, Flash Memory, Package, Comparator, Low-Power Modes.

Texas Instruments
ADC Resolution: 12-bit
Flash Memory: 60KB (60K x 8 + 256B)
Package: 64-LQFP (10x10 mm)
موازنہ کریں MSP430F1612IPM →
Texas Instruments
ADC Resolution: 12-bit
Flash Memory: 60KB (60K x 8 + 256B)
Package: 64-LQFP (10x10 mm)
موازنہ کریں MSP430F1612IPM →
Texas Instruments
ADC Resolution: 12 bits
Flash Memory: 48 KB
Package: 64-pin LQFP (PM), 10 mm x 10 mm
موازنہ کریں MSP430F1612IPM →

MSP430F1611IPM

✅ ڈراپ-اِن
Texas Instruments
📦 64-LQFP (10 x 10 mm)
16-bit mixed-signal microcontroller (MCU) · MSP430 16-bit RISC · 8 MHz · 48 KB · 10 KB · 12 bits · Dual 12-bit DAC · Integrated

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

MSP430F1612IPM زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Microcontroller Type 16-bit ultra-low-power mixed-signal microcontroller
CPU Architecture 16-bit RISC MSP430 architecture
زیادہ سے زیادہ کلاک فریکوئنسی 8 MHz
Register Width 16 bit
Flash Memory 55 KB (55K x 8 + 256 bytes)
SRAM 5 KB
ADC Resolution 12 bit
DAC Configuration Dual 12-bit DAC
Analog Comparator Integrated comparator
DMA Integrated direct memory access controller
Serial Interfaces I2C, SPI, and UART
Low-Power Modes 5 operating modes
پیکیج 64-LQFP (10 x 10 mm)
ماؤنٹنگ ٹائپ Surface mount

MSP430F1612IPM 64-lqfp (10 x 10 mm) پن کنفیگریشن گائیڈ

MSP430F1612IPM (64-lqfp (10 x 10 mm) پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

MSP430F1612IPM کے لیے 64-lqfp (10 x 10 mm) پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MSP430F1612IPM.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

MSP430F1612IPM کے لیے موزوں ہے 6 ایپلیکیشنs: Portable Measurement Instruments, Industrial Data Acquisition, Sensor Interface and Conditioning, Precision Control Systems, Low-Power Environmental Monitoring, Connected Embedded Control.

📱

Portable Measurement Instruments

The MSP430F1612IPM fits portable instruments because it combines an 8 MHz 16-bit RISC CPU with a 12-bit ADC, 5 KB of SRAM, and five low-power modes in one 64-LQFP device. The MCU can acquire sensor data, process results, and control a display while spending much of its operating time in a reduced-power state. Its 55 KB of Flash provides room for calibration tables, control routines, and communication firmware. In a handheld meter, the dual DAC channels can generate excitation or reference signals, while I2C, SPI, and UART support sensors, memory, and host connectivity.

🏭

Industrial Data Acquisition

The MSP430F1612IPM is suitable for compact industrial data-acquisition modules because its 12-bit ADC, comparator, and DMA resources can process analog channels while the CPU handles configuration and communications. DMA reduces processor involvement during repeated transfers, and the 8 MHz CPU provides sufficient throughput for filtering, scaling, and status monitoring. The three listed serial interfaces allow local sensors, external converters, and supervisory equipment to share the controller. Because the package is a 10 x 10 mm 64-LQFP, the device also supports compact panel-mounted or distributed acquisition hardware without requiring a large processor footprint.

🧩

Sensor Interface and Conditioning

The MSP430F1612IPM can act as the central controller for a mixed-signal sensor interface by combining analog measurement with digital conditioning in one microcontroller. The 12-bit ADC reads sensor outputs, the comparator handles threshold events, and the dual 12-bit DACs can produce control or excitation voltages. The 16-bit RISC CPU is well suited to proportional, integral, derivative, calibration, and filtering operations, while DMA supports efficient buffer movement. Its I2C and SPI interfaces allow expansion when the application exceeds the integrated converter resources. Firmware should calibrate the ADC and DAC channels and account for reference-voltage tolerance during measurement accuracy validation.

⚡

Precision Control Systems

The MSP430F1612IPM supports compact closed-loop control where an analog output must be coordinated with digital sensor feedback. The dual 12-bit DACs can drive control or reference signals, while the comparator can perform fast threshold detection around a controlled operating point. The 8 MHz 16-bit CPU executes control calculations efficiently, and 5 KB of SRAM accommodates working state and data buffers. I2C, SPI, and UART provide links to power stages, actuators, or supervisory controllers. Designers should confirm loop timing and DAC settling requirements in the application, especially where deterministic update timing is more important than low standby power.

🌐

Low-Power Environmental Monitoring

The MSP430F1612IPM is appropriate for battery-operated environmental monitoring when periodic measurement, local processing, and low standby consumption are required. Its 12-bit ADC supports analog sensing, its 5 KB of SRAM can hold recent samples and processing state, and its 55 KB of Flash supports firmware, calibration coefficients, and event logic. Five low-power operating modes permit duty-cycled operation, while UART or SPI can report readings to a local host or remote radio. DMA can improve acquisition efficiency, and the comparator may detect threshold crossings. Firmware should use the datasheet-defined timing and I/O retention conditions when entering low-power states.

🔧

Connected Embedded Control

The MSP430F1612IPM can serve as a compact controller in connected equipment requiring local mixed-signal processing rather than only data relay. Its I2C, SPI, and UART interfaces support sensors, external memory, actuators, and service ports, while the ADC and dual DACs handle local analog functions. The 8 MHz CPU and 16-bit registers support efficient state-machine and control code, and DMA helps maintain transfer throughput. Five low-power modes make the architecture useful in periodically connected equipment. Developers should define a deliberate peripheral shutdown and wakeup strategy to avoid leaving unused interfaces active and consuming additional standby energy.

What are the key specifications of MSP430F1612IPM that engineers should know?
The MSP430F1612IPM combines an 8 MHz 16-bit RISC CPU, 55 KB of Flash memory, 5 KB of SRAM, and a 64-LQFP 10 x 10 mm package. Its mixed-signal resources include a 12-bit ADC, dual 12-bit DACs, a comparator, and DMA, while I2C, SPI, and UART provide external connectivity. According to the Texas Instruments MSP430F1612 product page, five low-power modes support duty-cycled and battery-powered designs.
Where can I download the MSP430F1612IPM datasheet PDF?
The MSP430F1612IPM datasheet and supporting technical information are available from the Texas Instruments MSP430F1612 product page at https://www.ti.com/product/MSP430F1612. Open the device documentation section to locate the manufacturer datasheet. The same page also provides the part-specific MSP430F1612IPM ordering information, which is useful for confirming the exact 64-LQFP device and its ordering details.
Where can I find the MSP430F1612IPM pinout?
The MSP430F1612IPM pinout is shown in the pin-configuration material published with the Texas Instruments MSP430F1612 device documentation. The device uses a 64-LQFP 10 x 10 mm package, so use the 64-pin diagram when assigning nets and when checking exposed-pad or thermal-pad requirements. Confirm the pin names and package drawing against the current manufacturer datasheet before releasing the PCB layout.
What is the MSP430F1612IPM used for?
The MSP430F1612IPM is intended for low-power mixed-signal embedded systems that need both control and analog signal handling. Its 12-bit ADC supports sensor acquisition, its dual 12-bit DACs support analog output and control, and DMA can move conversion data with limited processor intervention. According to the Texas Instruments product page, I2C, SPI, UART, and five low-power modes make it suitable for portable measurement and connected industrial equipment.
Is MSP430F1612IPM suitable for battery-powered measurement applications?
Yes, the MSP430F1612IPM is suitable for battery-powered measurement applications because its MSP430 architecture provides a 16-bit RISC CPU, 16-bit registers, constant generators, and five low-power modes. These features allow the device to alternate between active processing and low-power states. The integrated ADC, dual DACs, and DMA further reduce the need for separate data-acquisition components in compact instruments.
MSP430F1612IPM vs MSP430F1611IPM — which is better for a new design?
The MSP430F1612IPM is the better choice when 55 KB of Flash is important, while the MSP430F1611IPM offers 48 KB of Flash and therefore about 12.7% less program memory. Both belong to the MSP430F16xx family and are identified as 64-LQFP-compatible alternatives, but firmware memory requirements, peripheral differences, and timing constraints must be checked before substituting one for the other.
When should I choose MSP430F1612IPM over MSP430F1611IPM?
Choose the MSP430F1612IPM when the application needs additional program memory beyond the 48 KB available in the MSP430F1611IPM or otherwise requires the F1612 device's specific mixed-signal feature set. The MSP430F1612 provides 55 KB of Flash and includes a 12-bit ADC, dual 12-bit DACs, a comparator, DMA, I2C, SPI, and UART. Use the F1611 only after confirming that its memory and peripheral configuration satisfy the design.
What is the best drop-in replacement for MSP430F1612IPM?
The MSP430F1611IPM is the identified same-family, same-package replacement candidate for the MSP430F1612IPM. Its principal documented difference is 48 KB of Flash versus 55 KB, a reduction of approximately 12.7%. Before replacing the device, verify code size, interrupt-vector requirements, peripheral availability, voltage limits, and timing constraints; a footprint match alone does not establish complete design equivalence.
Can MSP430F1611IPM replace MSP430F1612IPM without PCB changes?
The MSP430F1611IPM can share the MSP430F1612IPM's 64-LQFP footprint, so PCB changes are generally unnecessary at the package level. Its Flash memory is 48 KB rather than 55 KB, however, so firmware and boot-code size must be checked. A firmware migration should also verify interrupt handling, peripheral assignments, startup behavior, and any features that differ within the MSP430F16xx family.
What can replace MSP430F1612IPM?
MSP430F1611IPM is the closest identified drop-in replacement candidate because it uses the same 64-LQFP package and belongs to the same MSP430F16xx family. The main constraint is its 48 KB Flash capacity compared with 55 KB on the MSP430F1612IPM. No cross-brand drop-in replacement is identified here, so firmware and peripheral validation remain necessary even when the physical footprint is unchanged.
Is MSP430F1612IPM the same as MSP430F2618TPM?
No. The MSP430F2618TPM is described as a newer MSP430-family successor with lower power and more memory, not as a pin-for-pin equivalent of the MSP430F1612IPM. It should be treated as a design-migration option rather than a drop-in replacement unless the package, pin assignments, memory map, interrupt architecture, and peripheral usage are independently verified. The MSP430F1611IPM is the closer same-family candidate.
Where can I buy MSP430F1612IPM online?
Use the Request a Quote form on this page to request MSP430F1612IPM availability, current lead time, and a quotation for the exact 64-LQFP ordering code. The manufacturer identifies MSP430F1612IPM under the MSP430F1612 product family, and the part-specific ordering page is available at https://www.ti.com/product/MSP430F1612/part-details/MSP430F1612IPM. Do not substitute a different MSP430 suffix without reviewing the ordering table.
What is the price of MSP430F1612IPM?
Current MSP430F1612IPM pricing and quantity availability should be requested through the Request a Quote form on this page. The form is the appropriate channel for an exact 64-LQFP quotation, including requested quantities and delivery requirements. Confirm the MPN spelling MSP430F1612IPM when submitting the request so that the quotation corresponds to the intended tray or package configuration.
What is the lead time and stock status for MSP430F1612IPM?
The current stock position and lead time for MSP430F1612IPM should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, scheduled production, and requested delivery terms, so a general availability statement should not be substituted for a firm allocation. Include the required quantity, target date, and permitted substitute policy in the request.
How should the MSP430F1612IPM be decoupled and laid out?
Place the required bypass capacitors close to the device's supply and ground pins and follow the connection and return-path guidance in the manufacturer pin configuration material. Keep analog inputs and DAC outputs away from digital switching traces, use a quiet ground reference for the converter section, and provide adequate copper around the 64-LQFP package for thermal dissipation. Exact capacitor values and pin-specific layout guidance should be confirmed in the current MSP430F1612 documentation.

کے لیے انجینئرنگ ریفرنس ڈیٹا MSP430F1612IPM — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the MSP430F1612IPM when a compact 64-LQFP design needs an 8 MHz 16-bit MCU, 55 KB of Flash, 5 KB of SRAM, a 12-bit ADC, dual 12-bit DACs, comparator, DMA, and three serial interfaces. Its five low-power modes also make it appropriate for portable measurement and duty-cycled sensor systems. Select the MSP430F1611IPM only when its 48 KB Flash is sufficient and a full review confirms equivalent peripheral and timing behavior in the intended design. The MSP430F2618TPM may be useful when lower power and additional memory justify firmware and hardware migration, but it should not be treated as a pin-for-pin substitute without detailed validation. For an existing PCB, prioritize the MSP430F1611IPM because its package matches; for a new mixed-signal design, the MSP430F1612IPM offers the clearest combination of program memory and integrated analog resources.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ MSP430F1611IPM
Package 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm)
Brand Texas Instruments Texas Instruments
Flash Memory 55 KB (55K x 8 + 256 bytes) 48 KB
Product Class 16-bit ultra-low-power mixed-signal microcontroller MSP430F16xx family microcontroller

اہم امتیازی خصوصیات

  • Larger Flash memory within the same identified 64-LQFP family footprint (بمقابلہMSP430F1611IPM)
  • Two integrated 12-bit DAC channels support analog output and control (بمقابلہMSP430F1611IPM)
  • Integrated DMA supports efficient mixed-signal data movement (بمقابلہMSP430F1611IPM)

ڈیزائن نوٹس

Follow the manufacturer pin-configuration guidance when placing supply decoupling and analog components. Keep the device's required bypass capacitors close to their corresponding supply and ground pins, use short ground returns, and separate sensitive analog routing from high-speed digital signals. The 64-LQFP footprint has fine-pitch leads, so verify land-pattern dimensions, solder-mask clearance, and assembly tolerances against the current package drawing before PCB release.

Treat the ADC inputs and DAC outputs as precision analog nets even though they are integrated on the MCU. Route them away from switching-regulator nodes, high-current LED paths, and clocks. Connect analog and digital ground systems according to the manufacturer recommendations, maintain a quiet reference return for the converter section, and avoid placing test-point stubs directly on sensitive nodes where they can increase capacitance and degrade transient response.

The five low-power modes can reduce energy consumption only if the firmware shuts down unused peripherals and controls wakeup timing correctly. Review the manufacturer's clock-startup, I/O-state, and retention requirements before entering a deep low-power state. External pull resistors may be required to prevent signal drift during sleep, particularly on communications lines or externally controlled analog nodes.

Do not treat the MSP430F1611IPM as an automatic firmware-identical replacement for the MSP430F1612IPM. Its Flash capacity is 48 KB rather than 55 KB, so image size, bootloader assumptions, vector-table placement, and update mechanisms must be checked. Also verify every ADC, DAC, comparator, DMA, I2C, SPI, and UART assignment before substitution, because a matching package does not establish identical peripheral behavior.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The available product information does not state the device's RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these details using the manufacturer's current product documentation and material declarations.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-20 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

MSP430F1612IPM datasheet MSP430F1612IPM specifications MSP430F1612IPM pinout MSP430F1612IPM 64-LQFP MSP430F1612IPM replacement MSP430F1612IPM equivalent MSP430F1612IPM vs MSP430F1611IPM MSP430F1612IPM price MSP430F1612IPM stock Texas Instruments MSP430F1612IPM MSP430F1612IPM datasheet PDF MSP430F1612IPM application circuit MSP430F1612IPM ADC DAC comparator

متعلقہ اجزاء اور اصطلاحات

Texas Instruments MSP430F1612IPM MSP430F1611IPM MSP430F2618TPM MSP430 16-bit RISC CPU mixed-signal microcontroller microcontroller embedded controller semiconductor 55 KB Flash memory 5 KB SRAM 12-bit ADC dual 12-bit DAC comparator direct memory access DMA I2C SPI UART 64-LQFP LQFP package surface-mount package ultra-low-power design five low-power modes
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں